Stojalo Tiska nakup rabljenega (10.308)

Stanje: kot nova (razstavni stroj), Technical Data: Iodpfsfhqhdox Af Teht Maximum pressing force: 800 kN Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C.

Stanje: rabljeno, Elastomer Test Stand BIA Turnkey Test Systems Hexapod Item No.: PT-065 Designation: Elastomer Test Stand Manufacturer: BIA Turnkey Test Systems Description: Test stand for determining and analyzing mount characteristic curves and values at vehicle operating points mount characteristic curves and values at operating points under specified temperature conditions mount behavior under operational stress (compression set, characteristic curve change) operational noise at operating points on elastomer mounts in the suspension/drivetrain area Test specimens are clamped between a fixed upper plate and a movable lower plate. The movable plate is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates to accommodate a wide range of test specimens and fixtures. Degrees of Freedom Amplitude Speeds Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340°/s 50 Hz 3.75 kNm Mys ±10° 360°/s 50 Hz 3.75 kNm Mzs ±25° 580°/s 50 Hz 3 kNm Hydraulic Hexapod: The hydraulic hexapod consists of 6 hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder is equipped with two parallel servo valves (38 l/min). The six cylinders drive the movable plate via six connecting rods. The connecting rods are equipped with a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing is supplied directly from the cylinder. Ijdjwhdnhspfx Af Tjht Linear Actuator: The distance between the upper and lower plate can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw nut system. The linear actuator is equipped with an absolute encoder, which is mounted on the input shaft of the gearbox. Hydraulic Actuator: The hydraulic cylinders are fitted with magnetostrictive displacement sensors. Resolution: 0.0015% Linearity:

Leto izdelave: 1995, Stanje: zelo dobro (rabljeno), 1 unit - Free-standing frame silo Manufacturer: Stanelle Year of manufacture: 1995 Diameter: 3000 mm Total volume: 84 m³ Usable volume: 70 m³ Iedpfx Ajv Nri Rof Toht Overall height: 17.53 m Internal pressure: +45/-5 mbar Material: ST 37-2 Total weight: approx. 12 tons Bulk density: 600 kg/m³ Ventilation filter: Infra-Jet AJN 204 (20 m²) Filling line: DN 100 Pressure equalization valve: DN 150 Door: 850 x 2000 mm Caged ladder with rest platform !! All static verifications available !! Vibratory discharge base: Ø 1500 mm Material: Stainless steel 1.4301 Cone bottom angle: 50° Unbalance vibrator JV 102-14 (0.45 kW) Slide gate: MFA DN250 Housing: Aluminium Slide plate: 1.4301 Aeration strip: Promelt V fluid strip 1250x125 Rotary valve: DN250 (200 liters) Material: Steel Max. 0.5 bar Dosing container – screw pre-bin 700 liters Dimensions: 1615 x Ø800 mm Material: Steel Max. 0.5 bar Dosing screw: DN100 SEW geared motor: 1.5 kW (25 rpm) Agitator drive: SEW 0.55 kW Various level sensors – vibrating fork level switch Endress Soliphant FTM 930 / 931 Level probe Vegaflex 62 Coating renewed in 2023 Substrate preparation: sandblasted Paint system by manufacturer Shervin-Williams Primer: ZG64 solvatic 2K-EP primer, sand yellow RAL1002 Top coat: ZD27 solvatic PU topcoat, cream white RAL 9001 ! ! ! The parts list is attached directly below as a PDF ! ! !

Stanje: dober (rabljeno), Leto izdelave: 1983, številka stroja/vozila: 7346, Offer 24016 Technical Data: - Drilling capacity: 22 mm - Drill spindle taper: MT 2 - Drill spindle stroke: 100 mm - 4 spindle speeds: 355 – 710 – 1400 – 2800 rpm - Throat depth: 210 mm - Machine table: 480 x 420 mm - Min./max. distance spindle/table: approx. 190 / 340 mm Iedjrwmbgspfx Af Tjht - Drive: 400 V / 1.1 kW - Required space: approx. W 450 x H 1200 x D 700 mm - Weight: approx. 170 kg

Stanje: dober (rabljeno), Carton Flow Storage Rack Professional roller track system: INTERROLL Includes five roller shelves, each measuring 200 x 130 cm Ijdpfx Ajiuidisf Tsht Configurable for various carton widths Overall rack dimensions: 230 x 135 cm, height 285 cm Includes five roller shelves, each 200 x 130 cm Approx. 100 units available Technical condition: used, in good working order

Stanje: dober (rabljeno), Paletno regal, regal za težke tovore, visoko regal, sestavljiv regal, regalni stojalniki za skladišče -Proizvajalec: SSI Schäfer, paletni sestavljiv regal 6 polj / dolžina regala 17.100 mm -Širina polja: 2.700 mm -Višina regala: cca 3.500 mm -Stojala: 7 kosov 3.600/1.105/180 mm -Prečne vezi: 30 kosov 2.770/65/250 mm -Izročitev/cena: komplet -Transportne dimenzije: 3.620/1.150/V1.050 mm Ihsdpfx Aow R Rahof Tst -Skupna teža: 726 kg

Stanje: novo, Bernardo Workshop Press WK 20 FH Pro Technical Specifications Pressing force: 20 t Piston stroke: 185 mm Table width: 170 mm Clearance (E): 510 mm Clearance (F): 130 mm Distance cylinder - table (F1): 40 mm Distance cylinder - table (F2): 965 mm Lateral cylinder travel (M): 175 mm Width (A): 730 mm Depth (B): 560 mm Height 1 (C): 1525 mm Height 2 (D): 1630 mm Weight approx.: 112 kg Features • Supplied as standard with left and right traversable pressure cylinder • Suitable for aligning, pressing, bending, assembling gears, discs, etc. • Standard equipment includes foot pedal and hydraulic hand pump for piston feed • Supplied with V-block for aligning shafts • Automatic piston return via integrated return spring as standard Iedpfjd Du T Rjx Af Tjht • Height-adjustable press table with locking pin • Large, easy-to-read pressure gauge • Includes two-stage hydraulic pump • Robust design thanks to welded steel frame

Stanje: rabljeno, 14 prekatov, približno 2000 kg na prekat. Globina nosilca: 205 mm na prekat. Širina: 5850 mm. Globina: 4070 mm. Višina: 2980 mm. Ijdpfoxcv Akex Af Toht

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Side frame passage: 600 mm Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Iodpfx Ascna Hfof Tsht Strokes per minute: 40–180 Power requirement: 18.5 kW Weight: 20 tons Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Leto izdelave: 1995, Stanje: dober (rabljeno), številka stroja/vozila: 044092, Offer 22148 Ihsdpfoiba R Nex Af Tet Technical Specifications: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Bracket for wall mounting

Stanje: pripravljen za uporabo (rabljen), A rack for DC power modules with two electrical enclosure units is available. Power module: Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, nominal power: 30kW, efficiency: over 95%, dimensions (W/H/D): approx. 483mm/134mm/550mm, weight: approx. 31kg. Includes two electrical enclosure units. Documentation available. On-site inspection possible. Iodpfx Aeu Iztmsf Toht

Stanje: novo, Disc diameter: 250 mm Grinding wheel dimensions: 250 x 25 x 20 mm Speed: 2,850 rpm Voltage: 400 V Total power requirement: 2.0 kW Machine weight approx.: 23.0 kg Required space approx.: 600 x 290 x 300 mm Features: - Heavy-duty design and high-quality equipment - Ideal for professional use - Perfect for dulling and polishing - Achieves mirror-finish surfaces on various materials - When used with optionally available polishing wheels and compounds - Lockable ON-OFF switch according to IP54 with undervoltage release - Includes motor with copper windings for long service life - Standard with rubber feet for vibration-free operation - High running smoothness due to balanced rotor with quality ball bearings - Attractive machine body made from high-grade die-cast construction Ihodpfx Afsxak H So Tot - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing wheel - Hard polishing wheel - Operating manual in German

Stanje: zelo dobro (rabljeno), 5 kosov, A-okvir, naslon na stran: 390 mm Zunanje dimenzije: Ijdpfsxat Ulsx Af Teht Širina: 2420 mm Globina: 1360 mm Višina: 2530 mm

Leto izdelave: 2005, Stanje: dober (rabljeno), številka stroja/vozila: 50 330 008, Offer 21055 Technical Data: - Polishing wheel diameter: approx. 300 mm Ihjdoi Dav Dopfx Af Tjt - Wheel width: approx. 40 mm - Wheel bore: approx. 76 mm - Wheel speed: 1500 rpm - Drive: 400 V / 2.2 kW - Working height: approx. 1150 mm - Machine stand - Space requirement: approx. W 500 x H 1300 x D 250 mm - Weight: approx. 50 kg

Stanje: novo, Load capacity 5,000 kg Height 800 mm Width 1200 mm Features: - Robust construction - High load-bearing stability - Powder-coated in RAL 5010 gentian blue - CE marking Technical details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5.0 t - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirements approx.: 1.2 x 0.8 x 0.8 m Ihsdoxabyvjpfx Af Tot - Weight approx. 40.0 kg

Leto izdelave: 1995, Stanje: dober (rabljeno), Load capacity: 15,000 kg, Tine length: 600 mm, Isdpotza Inofx Af Tsht Overall dimensions: 6,000 x 3,210 mm, Length: 5,830 mm, Width: 1,200 mm, Height: 3,200 mm.

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 12355, Offer 25080 Shifting Sheet Rack with 10 Moveable Material Stands Technical Data: - Stand – Compartment Dimensions / Support Surface: W 3000 x H 1800 mm Ijdpfjv Ra Idox Af Tjht - Compartment Depth / Installation Footprint: 180 mm - Max. Load Capacity per Compartment: 2000 kg - Slide-in Holder Brackets - Guide Rail: L 4750 mm - Total Space Requirement approx.: L 4750 x H 2200 x D 4000 mm - Weight approx.: 3000 kg

Stanje: novo, Load capacity: 15,000 kg Height: 790 - 1350 mm Width: 1200 mm Weight: 65.0 kg Features: - Robust construction - High load stability - Powder-coated in RAL 5010 gentian blue - With height adjustment - CE marking Technical details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15.0 t - Height adjustment: 790 - 1350 mm - Support surface: 1200 x 120 mm - Space requirement approx.: 1350 x 720 x 1350 mm Ihsdpfx Asxabxlof Tet

Stanje: dober (rabljeno), Support: 2 x 300 mm, Delivery without the yellow glass loading fork, Height: 3100 mm, Width: 1140 mm, Ihodjtza Tdepfx Af Tot Length: 3810 mm

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: xxxx, Ref. No. 24265 Technical data: Iodpfx Afotx Ubrs Toht - Shaft mount diameter: 35 mm - Usable shaft length: 90 mm - Drive speed: 1450 rpm - Drive: 400 V / 4.4 kW - Space requirement approx.: W 1300 x H 2500 x D 800 mm - Weight approx.: 200 kg

Stanje: novo, Load capacity 2,000 kg Height 800 mm Width 1,200 mm Features: - Robust construction - High load-bearing stability - Powder-coated in RAL 5010 gentian blue - CE marking Technical Details: - Height: 800 mm - Width: 1,200 mm - Load capacity: 2.0 t - Height adjustable: no Iodpfjxaa Ncjx Af Tsht - Support surface: 1,200 x 100 mm - Space requirement approx.: 1.2 x 0.8 x 0.8 m - Weight approx. 30.0 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 334, Offer 19194 Technical Specifications: Ihjdpfxsrwl Nns Af Tot - Drilling capacity: 22 mm - Spindle taper: MT 2 - Spindle stroke: 100 mm - 4 spindle speeds: 355 / 710 / 1400 / 2800 rpm - Clockwise and counterclockwise rotation - Throat depth: 210 mm - Machine table: 480 x 420 mm - Distance from machined base plate to spindle: 190 / 340 mm - Drive: 400 V / 0.8 / 1.0 kW - Space requirement (W x H x D): 450 x 1200 x 700 mm - Weight approx.: 170 kg

Stanje: novo, Load capacity: 2,000 kg Height: 500 mm Width: 1,200 mm Features: - Robust construction - High load-bearing stability Iodpsxaa Dmjfx Af Toht - Powder-coated in RAL 5010 gentian blue - CE marking Technical specifications: - Height: 500 mm - Width: 1,200 mm - Load capacity: 2.0 tons - Height adjustable: no - Support surface: 1,200 x 100 mm - Space requirement approx.: 1.2 x 0.8 x 0.8 m - Weight approx.: 20.0 kg

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 013125, Offer 21283 Technical Specifications: - Grinding wheel diameter: approx. 500 mm - Grinding wheel width: approx. 50 mm - Grinding wheel bore: approx. 127 mm - Wheel speed: 950 rpm - Drive: 400 V / 3.3 kW - Working height: approx. 800 mm - Working depth / safety depth adjustable - Connections for extraction pipe: 100 mm - Space requirement: approx. W 1250 x H 1150 x D 650 mm Ihedpsi Daw Tsfx Af Tet - Weight: approx. 350 kg

Leto izdelave: 1992, Stanje: rabljeno, številka stroja/vozila: 207320; Lg-Nr. 09361, Technical Data: - Max. working length: 1250 mm - Distance between uprights: 1050 mm - Max. pressing force: 80 t - Stroke: 250 mm - Throat depth: 300 mm Ihsdpfx Ajb Rk Ekof Tet - Max. installation height between table and ram: 560 mm - Stroke speeds: - Downward idle speed max: 100 mm/sec - Upward speed: 100 mm/sec - Downward pressing speed max: 12 mm/sec - Total drive power: 15 kW - Space requirement approx.: W 1750 x H 3400 x D 2000 mm - Weight: approx. 8500 kg - Equipped with: - CNC control CYBELEC DNC 7400 PSGY - CNC-controlled X-axis back gauge: 5 – 1000 mm - Z-axis adjustable in three stages, pneumatically height-adjustable - Manually movable and foldable back gauge fingers - CNC-controlled pneumatic die shifting - Hydraulic tool clamping - Manual crowning - 2 support arms - Divided punch tool H 320 x L 1000 mm - Goose neck die H 320 mm x L 1000 mm - Universal die L 1000 mm