3D tiskalnik nakup rabljenega (158)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Iolhccqoibikwoqean

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 200 h, skupna dolžina: 2.128 mm, skupna širina: 1.294 mm, vhodna napetost: 400 V, trajanje garancije: 6 meseci, vhodni tok: 32 A, laserska moč: 100 W, kapaciteta rezervoarja: 32 l, volumenski pretok: 20 m³/h, Stroj za lasersko sintranje poliamida z dvema izmenljivima posodama in razpakirno postajo. Stroj si je mogoče kadar koli ogledati in preizkusiti v demo centru BIBUS-Austria. Poleg tega ima sistem hitro menjavo med vlečno rezilo in premaznim valjem – sistem je vedno na najnovejšem tehnološkem nivoju, saj so se izvajale stalne nadgradnje. Ijlhccjqwkypsqqean

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.504 h, Oprema: ABS, kompresor, Tiskalnik je popolnoma funkcionalen in še vedno priključen na elektriko. Ni bil pogosto uporabljen, le 1504 delovnih ur. Na voljo so vse licenčne materiale za modele iz leta 2019. Novi komplet PM je na lokaciji in bo nameščen tik pred odpremo tiskalnika novemu kupcu. Enota za odstranjevanje podpor EFT-900 je na voljo. Iaelhjw Imk Roccqqjn

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: EVO-lizer A4, Leto izdelave: 2015, obratovalne ure: 4.413 h, skupna dolžina: 720 mm, skupna višina: 720 mm, skupna širina: 540 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 64 kg, vhodna napetost: 230 V, vhodni tok: 4 A, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, natančnost pozicioniranja: 0,05 mm, širina mize: 270 mm, kapaciteta rezervoarja: 11 l, dolžina mize: 195 mm, raven hrupa: 46 dB, število tiskalnih glav: 2, Rabljeni FDM 3D-tiskalnik EVO-lizer A4 Podatki o napravi: Dimenzije tiskalnika (Š x G x V)……………..540 x 720 x 710 mm Teža……………..…….64 kg Priključni podatki……………..……230 VAC; 50/60 Hz; 4A Temperatura okolja……………..15 – 35 °C Relativna vlažnost……………30 - 70 % Islhexu I R Djccqqoan Akustični podatki: Način mirovanja……………40 dBA Obratovalni način (1 m razdalje)…………….46 dBA Obratovalni način (40 cm razdalje, odprta vrata)……………62 dBA Tehnični podatki: Velikost tiskalne površine (Š x G x V)……………..…………270 x 195 x 205 mm Minimalna debelina sloja……………..…0,10 mm Natančnost pozicioniranja…………….0,05 mm Temperaturno območje šobe…………….160 – 260 °C Temperaturno območje grelne plošče……………..30 – 100 °C Material filamenta……………ABS, PLA Premer filamenta……………..1,75 mm Programska oprema/Slicing program…………….EVO-lizer

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 2.974 h, skupna dolžina: 730 mm, skupna višina: 1.350 mm, skupna širina: 480 mm, skupna masa: 85 kg, vhodna napetost: 240 V, vhodni tok: 2 A, vhodna frekvenca: 50 Hz, zahteva za prostor dolžina: 730 mm, potrebna višina: 1.350 mm, potrebna širina: 480 mm, Envisiontec Perfatory III MiniMultilens z dvema izmenljivima lečama je znan po svoji natančnosti, gladkih površinah in finih podrobnostih pri uporabi z različnimi sistemi smol. Je prava profesionalna naprava za najvišje zahteve glede kakovosti. Iaolhccqox Rb Iwjqsn Izmenljive leče omogočajo naslednje prostornine gradnje: - f60: 84x63x230mm z nativno XY ločljivostjo 60µm in ERM 30µm - f85: 44x33x230mm z nativno XY ločljivostjo 32µm in ERM 16µm Z ločljivost: 20-150µm, odvisno od materiala/smole Svetlobni spektri: UV (

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SG76G34001, Leto izdelave: 2017, obratovalne ure: 11.062 h, Trindo Digitalmanufaktur GmbH is selling a well-established production system of the HP Multi Jet Fusion class. The system is designed for industrial multi-shift operation and has been continuously maintained. System components: - 1x HP Jet Fusion 4200 Printer (M0E85A) - 1x HP Jet Fusion Processing Station (M0E89A) with Fast Cooling Function - 3x HP Jet Fusion Build Units (M0E92A) for maximized throughput Service & Maintenance Status: Active 3daas Contract: The machine is currently under an active HP Service Contract (3D-as-a-Service). Benefit for the buyer: As the system has been continuously maintained by HP, the typically expensive and complex recertification by the manufacturer is not required when taking over or relocating the system. Condition: Fully functional. All wear parts have been replaced at regular intervals by certified technicians under the service contract. Production capacity: Equipped with three build units, the system is optimized for high-throughput operation. This allows parallel scheduling of the following processes: - Printing process (Build Unit 1) - Cooling/unpacking phase in the processing station (Build Unit 2) - Cleaning and refilling/setup time (Build Unit 3) Transfer conditions: - Location: Munich (Trindo Digitalmanufaktur GmbH) - Documentation: Maintenance logs and operating hours can be reviewed if there is justified interest. Iaolheyiz Nqjccqqen - Inspection: System appraisal during ongoing operation is possible by prior arrangement.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 140L-C, Leto izdelave: 2022, obratovalne ure: 5.854 h, skupna dolžina: 1.450 mm, skupna višina: 1.040 mm, skupna širina: 1.250 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 380 kg, vhodna napetost: 400 V, vhodni tok: 12 A, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 10 °C, okoljska temperatura (maks.): 40 °C, električna varovalka: 16 A, širina mize: 500 mm, kapaciteta rezervoarja: 140 l, dolžina mize: 700 mm, moč: 8,3 kW (11,28 KM), največja hitrost vožnje: 24.000 mm/min, število tiskalnih glav: 2, Refurbished industrial fused filament fabrication (FFF) printer Includes: - 140L-C printer unit - Vibration-damped platform - License for slicing software (Simplify3D) Original price: €73,800 General technical specifications: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (fused filament fabrication) Filament diameter: 1.75 mm; open-material system Build area (L x W): 700 mm x 500 mm Build height: max. 400 mm Build volume: max. 140,000 cm³ Dimensions and weight: Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature specifications: Max. printhead surface temperature: 300°C (optionally 450°C) Max. build plate surface temperature: 180°C Max. build chamber temperature: 85°C Min. operating temperature: +10°C Max. operating temperature (ambient): +40°C Electrical data: Ielhcjxuh Nyjcqqean AC input: 400 V / 50 Hz Power supply: 24 V DC Connectivity: USB 3.0 / Ethernet Printing characteristics: X-axis speed: max. 400 mm/s Y-axis speed: max. 400 mm/s Z-axis speed: max. 300 mm/min XY-plane printing accuracy: < 0.1 mm Print control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Platform: 1,450 x 1,250 x 600 mm (LxWxH) Incl. storage compartments Incl. vibration-damping machine feet

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 031223510029, Leto izdelave: 2024, obratovalne ure: 573 h, skupna dolžina: 650 mm, skupna višina: 1.200 mm, skupna širina: 610 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 145 kg, vhodna napetost: 230 V, vhodni tok: 8 A, Prodajemo praktično novu 3D SLS štampačicu SINTERIT Lisa X, koja je radila samo 573 sata. U kompletu sa štampačicom dolazi: - 3D štampač Sinterit LISA X - Sinterit Studio Advanced ("slicer") - Transportni kofer za LISA X Iaslhewi Sivoccqqjn Tehničke prednosti: - Iznimno brza štampa. Brzine štampanja od 10-14 mm/h i kompletno radno područje sa najkompleksnijim oblicima se štampa za 34 sata. - Veći radni volumen Lisa X sa površinom 180 x 130 x 330 mm. - Širok spektar materijala, od izuzetno žilavih i fleksibilnih materijala do specijalizovanih materijala kao što je ESD prah. - Visok kvalitet štampe sa detaljima. - Otvoreno okruženje sa više od 50 parametara štampe za naprednu kontrolu i mogućnost upotrebe eksternih materijala. Nudimo: Mogućnost ličnog preuzimanja u Češkoj Republici ili profesionalne dostave u inostranstvo. Garancija 14 dana na povrat novca i mogućnost probnog štampanja. Popust za brzu kupovinu u roku od 7 dana.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Leto izdelave: 2020, skupna dolžina: 900 mm, skupna višina: 1.900 mm, skupna širina: 1.200 mm, vrsta vhodnega toka: trifazni, skupna masa: 400 kg, vhodna napetost: 400 V, vhodni tok: 13 A, temperatura: 420 °C, temperatura okolja (min.): 20 °C, okoljska temperatura (maks.): 40 °C, natančnost pozicioniranja: 0,02 mm, električna varovalka: 16 A, širina mize: 500 mm, dolžina mize: 400 mm, raven hrupa: 62 dB, For sale is an EVO-Tech EL-102 – an industrial FFF/FDM 3D printer (filament-based) designed for reliable use in prototyping as well as single-part and small series production. The system is engineered for reproducible printing conditions and features such as integrated material drying and a heated build chamber to ensure stable process results – especially when working with engineering-grade thermoplastics. - Print size: 500 × 400 × 510 mm - Build volume: 102 liters - Weight: 400 kg - Noise level: 62 dB - Positioning accuracy: 0.02 mm - Layer thickness: 0.10-0.75 mm - Nozzle diameter: 0.2 - 0.8 mm - Number of extruders: 2, independently controlled on one axis - Heated bed temperature: 200°C - Build chamber temperature: 100°C - Nozzle temperature: 420°C Iolhccqoyh Ratoqsan - Ventilation: Fume extraction via activated carbon filter - Minimum wall thickness: 0.3 mm - Power consumption: 240-4500 W - Spool capacity: up to 10 kg - Vacuum build platform - Integrated material drying to maintain consistent material quality during production The machine has been idle in the warehouse for a year and is therefore being sold as untested.

Stanje: skoraj kot novo (rabljeno), 3D-tiskalnik BigRep ONE, velikoformatni 3D-tiskalnik v dobrem stanju. Idealen za večje dele in prototipe. Vključno z dodatno opremo, takoj pripravljen za uporabo. Osebni prevzem prednost, možen ogled. Iaslhccqeyi H Rmjqjn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, skupna višina: 1.505 mm, skupna širina: 955 mm, največja dolžina izdelka: 1.565 mm, število osi: 3, Cette 3s HP 580 MFG COLOR a été fabriquée en 2019. Elle dispose d’un volume de construction d’environ 332 × 190 × 248 mm et d’une résolution de tête d’impression de 1200 dpi. Elle atteint une vitesse de fabrication jusqu’à 1 817 cm³/heure et utilise du nylon PA12 pour l’impression en couleurs réelles. Si vous recherchez des fonctions d’impression 3D haut de gamme, vous devriez considérer la machine HP 580 MFG COLOR que nous proposons à la vente. Contactez-nous pour plus d’informations. • Volume de construction : env. 332 × 190 × 248 mm • Épaisseur de couche : 80 microns • Résolution de la tête d’impression : 1200 dpi • Vitesse de fabrication : jusqu’à env. 1 817 cm³/heure • Matériau : nylon PA12 (impression couleur intégrale) • Sortie couleur : couleurs CMJN complètes avec contrôle au niveau du voxel • Aucun support nécessaire pour la plupart des géométries Iaoloyirxcehccqqsn • Logiciel : HP SmartStream 3D Build Manager • Formats de fichiers pris en charge : 3MF, STL, OBJ, VRML • Connectivité : Gigabit Ethernet • Alimentation : 200-240 V, 50/60 Hz • Consommation typique : env. 4,5-6,3 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 7.500 h, Kovinski 3D-tiskalnik iz leta 2022. Ta TRUMPF TruPrint 1000 Multilaser ima dva 200 W vlakenska laserja, ki omogočata večlasersko produktivnost s 7.500 obratovalnimi urami na laser. Namenjen je za visokoprecizne zobozdravstvene in medicinske komponente ter uporablja Bego Mediloy S-Co (kobalt-krom zlitina). Razmislite o nakupu tega TRUMPF TruPrint 1000 Multilaser kovinskega 3D-tiskalnika. Za več podrobnosti nas kontaktirajte. • Laser: 2 x 200 W vlakenski laser (Multilaser) • Obratovalne ure laserja: 7.500 h na laser Iajlhccqoyifireqon • Gradbeni volumen: 100 mm premer x 100 mm višina • Uporabljeni material: predvsem BEGO Mediloy S-Co (kobalt-krom) • Uporaba: visokoprecizni zobni in medicinski deli • Stanje: dobro vzdrževan; delovan v kontroliranem laboratorijskem okolju • Predaja: predaja stroja na vhodu v laboratorij

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, skupna višina: 2.050 mm, skupna masa: 4.500 kg, potovalna razdalja osi X: 260 mm, pomik osi Y: 260 mm, pomik po osi Z: 100 mm, število osi: 3, This 3s hybrid metal printer, Lumex Avance 25 from Matsuura, was manufactured in 2019. It features a hybrid system that combines metal laser sintering and high-speed milling, supporting a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm and accommodates a tool magazine with 20 tools. Consider the opportunity to purchase this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. • Operating hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/machining area: • Maximum workpiece size: 250 × 250 mm • Table size: 270 × 270 mm • Axes/Travel: • U-axis (sinter table): 185 mm • W-axis (powder spreader): 522 mm • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm • Repeatability (X/Y/Z): ±0.001 mm Iaelhjyhcxkeccqqjn • Typical materials: tool steels, maraging steel; stainless steels (e.g., 316L, 630); titanium alloys (Ti-6Al-4V, Ti-6Al-7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: nitrogen / argon

Stanje: rabljeno, Leto izdelave: 2014, Working width: 250 mm Working length: 250 mm Working height: 280 mm Laser power: 400 W (Rofin) Traverse speed (Z-axis): 10 – 1000 mm/s Positioning accuracy: +/- 0.1 mm Repeat accuracy: +/- 3.5 µm Power consumption: 6.8 kVA Compressed air connection: 6–10 bar Gas type: Shielding gas, Nitrogen 5 bar Space requirement: approx. 5.9 x 4.2 x 3 m Dimensions (L x W x H): 2.44 x 1.63 x 2.36 m Weight: 2,300 kg Lightly used Concept Laser M2 Cusing system for processing reactive and non-reactive powder materials. Equipped with process chamber, handling station, and ATEX Directive II-compliant powder extraction for combustible materials. Materials: Steel, stainless steel, and aluminum. Titanium processing possible at moderate additional cost. Dynamic coater system with 3 different doctor blades. Peripherals and accessories: - Rofin laser source (Photo 4) - Nitrogen generator (in next room, Photo 7) - External filter incl. blower and hour meter (10,464 h) – Photo 8 - Storage container for filter inserts - Lifting transport device for powder loading (Photo 9) - 6 stainless steel powder feed containers - Pneumatic vibratory sieve for use with powder containers - Powder container rack for interchangeable containers, dimensions 1.15 x 0.17 x 1.22 m (Photo 10) - Orange wet vacuum cleaner (Photo 8) Iajlhcjwdiwyscqqsn Sale due to production changeover. Original purchase price at the time: €500,000! Vid 1: Machine exterior, Vid 2: Processing – illustrated on this machine, Vid 3: Slideshow of part production on this machine + accessories. This is a used machine, therefore we sell under exclusion of any warranty/liability. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z50009537, Leto izdelave: 2018, obratovalne ure: 167 h, skupna dolžina: 50 mm, skupna višina: 81 mm, skupna širina: 57 mm, vrsta vhodnega toka: Enosmerni tok, skupna masa: 41 kg, vhodna napetost: 220 V, širina mize: 305 mm, dolžina mize: 305 mm, For sale well below market price: a barely used (166 operating hours) professional Replicator Z18 3D printer. • Extra-large print volume: 30.5 x 30.5 x 45.7 cm • Supported by the new, user-friendly MakerBot Replicator 3D Printing Platform • Cloud-based system with app support • MakerBot Replicator Smart Extruder, advanced motion control, and axis design • Integrated camera and diagnostics, assisted calibration • Large build volume enables rapid prototyping and model production • 11% larger print capacity compared to MakerBot Replicator 2 • Build volume: 25.2 x 19.9 x 15.0 cm (7,522 cm³) • Create lifelike objects easily and quickly • On-demand printing capability • 100-micron resolution—print paper-thin layers • Produce professional-quality, high-resolution prototypes and complex models • Smooth-touch surface finish—no post-processing required • Generate realistic prototypes and models for presentations • 3.5” color LCD display • Intuitive onboard user interface for a rich user experience • Access your personal library and preview 3D files directly on the machine • Integrated utility for printer setup and maintenance • MakerBot Replicator Smart Extruder (print head)—easy to replace • Detects filament depletion and automatically pauses printing • Sends status updates to MakerBot Desktop and MakerBot Mobile app • Built-in camera for print monitoring and sharing on MakerBot Thingiverse or social networks Iolhccext Er Aeqqjan • Mobile control

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 52181, Leto izdelave: 2013, obratovalne ure: 40.000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Regular maintenance has been performed by Stratasys. The machines are in excellent condition and fully functional. All print heads are installed in the printer. Islswna R Sjhccqqjan Machines are ready for collection.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 52178, Leto izdelave: 2013, obratovalne ure: 40.000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly carried out by Stratasys. The machines are in excellent condition and fully operational. All print heads are installed in the printer. Iolhccqewna N Ueqsan Machines are ready for collection.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 52177, Leto izdelave: 2013, obratovalne ure: 40.000 h, Stratasys 3D printer. Iaelhcewna Nnecqqsn Printer purchased in March 2013 (original price: €120,000). Regular maintenance carried out by Stratasys. The machines are in excellent condition and fully operational. All print heads are installed in the printer. Machines are ready for collection.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, 3D Systems Projet 3500HDMax 3D printer – purchased in 2013, good condition, fully functional. Islhewnbd Hjccqqoan

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2013, Projet 3500HD Max 3D Printer, requires maintenance. Ijlhccswnbcisqqoan

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2013, Printer Projet 3500HD Max 3D Printer, maintenance required and in need of repair. Iaslhewnbb Ejccqqon

Stanje: zelo dobro (rabljeno), EOS Type: EOS M270 Metal Laser Sintering System Laser Sintering Machine 200 Watt Yb Fiber Laser Ijlheu Ebpcoccqqoan Material processed by the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner The system has been retrofitted with a Scanlab hurrySCAN 30 for improved printing accuracy. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight: approx. 1,130 kg For additional technical information, please refer to the manufacturer. Scope of delivery: EOS M270, chiller, and software Condition: used (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Stanje: zelo dobro (rabljeno), Eos EOSINT Plastic Laser Sintering System Iaolheft R Swjccqqsn We are offering an Eos EOSINT Plastic Laser Sintering System. Model: Eos EOSINT P380 The following components are included with the EOS P380 system: - Build chamber container - Powder container - Overflow container - Cooler: Termo TEK Thermochiller, Type: 802-18644-3 - Unpacking piston - Removal trolley - 3DM 8-zone process chamber heating, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin - Build volume: 350 mm x 350 mm x 610 mm - Voltage: 3/N/PE/400V AC - Frequency: 50 Hz - Connected load: 8 kW - Fuse protection: 32 A - Max. laser power: 100 W - Laser safety class (open): 4 - Laser safety class (closed): 1 - Weight: 850 kg - Type: EOSINT P 380 - Condition: used Scope of supply: (see image) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 3.300 h, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! Dražba celotne proizvodnje aditivne tehnologije z več kovinskimi tiskalniki, sintrirno in pralno postajo ter dodatnimi kompozitnimi tiskalniki! Ponudba vključuje naslednje dele: 3x Metal X 1x Sinter II 1x LMI pralna postaja 1x Mark Two plastični tiskalnik 1x OnyxOne plastični tiskalnik PODROBNOSTI STROJA Islhcceyc Ub Teqqean Obratovalne ure: 3.300 h OPREMA Redno vzdrževano in servisirano Intuitivno upravljanje prek zaslonov na dotik Programsko opremo za pripravo in dodelavo tiskanja Obdelava različnih kovin Celovita rešitev od konstrukcije do končnega izdelka Enostavna integracija v obstoječa okolja

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D31369, Leto izdelave: 2019, obratovalne ure: 73 h, skupna dolžina: 864 mm, skupna višina: 1.626 mm, skupna širina: 711 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 227 kg, vhodna napetost: 230 V, vhodni tok: 7 A, vhodna frekvenca: 50 Hz, širina mize: 355 mm, dolžina mize: 254 mm, gradbena višina: 355 mm, --- RARE OPPORTUNITY --- Iaolhexgh U Tjccqqsn Stratasys F370 for sale due to business closure. Barely used, with just 70 operating hours, it is essentially in mint condition. Ideal as an additional unit for existing machine parks or as a high-quality all-rounder for beginners. The printer is currently packed and in storage. Before decommissioning, it was professionally inspected and serviced by the manufacturer’s authorized distributor. The latest exported cfg file can be provided upon request. The F370 printer is designed for user-friendliness, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide range of materials for various 3D printing applications, including prototyping, tool and jig manufacturing, as well as low-volume end-part production. Its compact footprint, quiet and safe operation—with no special requirements—make the F370 ideal for workshops, offices, or even classrooms. With soluble support material, even complex geometries with internal cavities can be produced—uncommon in this printer class. The four easily accessible material spool bays at the front (2x model & 2x support) enable rapid material changes. Included software applications such as GrabCAD Print and Insight, automatic calibration, the integrated camera for remote print job monitoring from your computer, as well as an intuitive front control panel, complete the package.