3D tiskalnik nakup rabljenega (160)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Tiskarski stroji in tiskarske naprave 3D tiskalnik
Mali oglas
Borken
868 km
3D tiskalnik
ConceptLaserM2 cusing Multilaser 400W
Klic
Stanje: rabljeno, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc.
External dimensions:
Rjdsu Ebybopfx Abhjn
2542 x 1818 x 1987 mm (W x D x H)
Weight: 2300 kg
2 lasers, 400W each
Power supply: 3P/N/PE AC 400 V, 32 A
5 bar compressed air required
Protective gas possible via 2 connections for external N2 generators (optional)
Build volume: 250 x 250 x 280 mm
Layer thickness: 20-80 μm
Production speed: 2-20 cm³ (depending on material and laser power)
Operating conditions: 15-35°C
Laser operating hours:
Laser 1: 501 hrs
Laser 2: 503 hrs
Additional devices:
Lifting device Inox 200
Weight: 102 kg
Max. lifting capacity: 135 kg
Protection class: IP65
Wet separator NA 7-11 H CL EU Zone 22
Dimensions: 800 x 480-570 x 755-850 mm
Drive type: AC
Power: 1.25 kW
Voltage: 230 V
Current: 9.2 A
Protection class: IP65
Frequency: 50 Hz
Housing: sheet steel
Air flow rate: 130 m³/h
Continuous vacuum: -145 mbar
Short-term vacuum: -235 mbar
Liquid volume: 7 l
Water consumption: 0.26 l/h
Weight: 50 kg
QM powder automatic sieving station
Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz
Max. current draw: 3A / phase
Inert gas: 5 bar
Condition: used
Scope of delivery: (see picture)
(Specifications and technical data are subject to change and errors excepted!)
For further questions, we are happy to assist you by phone.
Mali oglas
Borken
868 km
3D tiskalnik + stroj za razvezavo itd.
Desktop Metal3D-Metalldrucker-Studiosystem
Klic
Stanje: zelo dobro (rabljeno), Desktop Metal 3D Printer Complete System
We are offering you a complete Desktop Metal 3D printer system.
Desktop Metal Studio System 3D Metal Printer
Complete system: 3D printer + debinding machine + sintering furnace
Desktop Metal
The three-part solution includes 3D printer, debinder, and furnace
Manufacturer: Desktop Metal
Model: Desktop Metal Studio System
Operating condition: Used (Good)
Year of manufacture: 2019
Desktop Metal Studio System
Includes:
1.1 Desktop Metal Studio 3D Printer
Bound Metal Deposition (BMD) Technology
Features:
Printed materials: Metal
Technology: FDM
Application: Industrial
Other features: Office-friendly
X-axis travel: 30 cm (12 in)
Y-axis travel: 20 cm (8 in)
Z-axis travel: 20 cm (8 in)
Description:
Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing and enables new features such as the use of closed-cell infill for lightweight strength.
1.2 Desktop Metal Studio Debinder (debinding machine)
Fully automatic debinding
Cleaning tank: 17.4 L (in-process) / 22.5 L (storage)
Description:
The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic liquid distillation and recycling mean there is no need to refill between cycles.
1.3 Desktop Metal Studio Sintering Furnace
Hybrid technology (microwave & conventional heating elements)
Build volume: 305 x 205 x 205 mm
Redpfjk Hz Nqox Abhen
Carbon housing
Gas supply: 2 x 900 L gas cylinders
Heating capacity: 20 kW
Features:
Function: Sintering
Configuration: Chamber
Heat source: Gas
Other features: High temperature, automatic
Maximum temperature: 1,400 °C (2,552 °F)
Description:
Fully automated and sized to fit through a standard office door, the furnace offers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure even heating and cooling without the residual stresses typical of laser-based systems.
Condition: used
Scope of delivery: (see picture)
(Technical data and information are subject to change and errors!)
For further questions, we are happy to assist you by phone.
Mali oglas
Borken
868 km
Tiskalnik SLS Laser-Sinter
EosEOSINT P 380
Klic
Stanje: zelo dobro (rabljeno), Eos EOSINT Plastic Laser Sintering System
We are offering an Eos EOSINT Plastic Laser Sintering System.
Model: Eos EOSINT P380
The following components are included with the EOS P380 system:
- Build chamber container
- Powder container
- Overflow container
- Cooler: Termo TEK Thermochiller, Type: 802-18644-3
- Unpacking piston
- Removal trolley
- 3DM 8-zone process chamber heating, 250°C
Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin
- Build volume: 350 mm x 350 mm x 610 mm
- Voltage: 3/N/PE/400V AC
- Frequency: 50 Hz
- Connected load: 8 kW
- Fuse protection: 32 A
- Max. laser power: 100 W
- Laser safety class (open): 4
- Laser safety class (closed): 1
- Weight: 850 kg
- Type: EOSINT P 380
- Condition: used
Redpfsft R Swjx Abhsn
Scope of supply: (see image)
(Technical data subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
Mali oglas
Borken
868 km
3D tiskalnik FDM
3D-SystemsProJet 660 Pro
Klic
Stanje: zelo dobro (rabljeno), Here we offer you a 3D-SYSTEMS 3D printer.
The ZPrinter ProJet 660 Pro 3D printer features a large build volume, allowing for the production of large models without prior sectioning. Additionally, the large base area increases productivity when printing many small models in a single print run.
This is a 3D color printer with impressive productivity and color accuracy. The ProJet ColorJet color 3D printers from “3D Systems”—also known as ZPrinter—use ColorJet CJP ‘binder jetting’ technology, printing layer-by-layer directly in a powder bed. As a result, even for complex and detailed prints, these 3D printers do not require dedicated support structures. The unfused powder supports the components during printing and is then semi-automatically recycled.
Areas of application include: communication of form and design, installation analysis, initial functional testing, variant trials, form development, design, research & development, marketing, sales, master patterns for thermoforming, dental models, presentations, and more...
This is the best ColorJet 3D color printer in its class for applications with the highest demands, setting new standards in full-color 3D printing systems.
Technical data: ZPrinter ProJet 660 Pro 3D Printer
Build envelope: 254 x 381 x 203 mm
Colors: 390,000 colors (5 print heads including black)
Resolution: 600 x 540 dpi
Minimum feature size: 0.1 mm
Automation: Fully automated (including automated setup and self-monitoring, automated powder loading, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel)
Vertical build speed: 28 mm/hour
Material options: High-performance composite material
Layer thickness: 0.089–0.102 mm
Number of jets: 1,520
Details: ZPrinter ProJet 660 Pro 3D Printer
Supported file formats: STL, VRML, PLY, 3DS, ZPR
Machine dimensions: 188 x 74 x 145 cm
Machine weight: 340 kg
Power requirements: 100–240 V, 1.5–7.5 A
Rsdpfxohb Dtpo Abhen
Workstation compatibility: Windows® 7, Windows® XP Professional, and Windows Vista® Business/Ultimate
Regulatory compliance: CE, CSA
Special setup requirements: None
Type: ProJet 660 Pro 3D Printer
Condition: used
Scope of delivery: (see picture)
(Subject to alterations and errors in technical data. All specifications are subject to change.)
For further questions, we are happy to assist you by phone.
Mali oglas
Borken
868 km
3D tiskalnik
German RepRapX1000
Klic
Stanje: zelo dobro (rabljeno), German RepRap 3D Printer
We are offering you a German RepRap 3D printer.
Redpfx Abjivpdwehsn
The X1000 by German RepRap is a large-format 3D printer capable of producing industrial-quality objects.
3D Printer Specifications:
German RepRap X1000
Manufacturer: German RepRap
Country: n.a.
Material: Standard materials (PLA, ABS, PP ...)
Technology: Fused Deposition Modeling (FDM/FFF)
Pre-assembled: n.a.
Dimensions: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.)
Weight: 400 kg / 881.8 lbs
Nozzle diameter: 0.4 / 0.6 mm
Minimum layer thickness: n.a.
Print speed: 150 mm/s
XY Precision: 20 µm
Max. build volume: 1000 × 800 × 600 mm
File format: n.a.
Software: Simplify3D
Connectivity: Wi-Fi
OS compatibility: n.a.
Power supply: n.a.
Additional features: Touchscreen
Type: German RepRap X1000
Condition: used
Scope of delivery: (See images)
(Technical data subject to change and errors excepted!)
For any further questions, feel free to contact us by phone.
Odkrijte več rabljenih strojev
Mali oglas
Borken
868 km
3D tiskalnik
SLM Solutions3D Drucker SLM 125
Klic
Stanje: zelo dobro (rabljeno), SLM Solutions
Model: SLM 125
Water-to-air cooler
Build volume (L x W x H): 125 x 125 x 125 mm (minus substrate plate height)
Reduced build volume (L x W x H): 50 x 50 x 50 mm (minus substrate plate height)
3D optics configuration: Single (1x 400 W) IPG fiber laser
Build rate: up to 25 cm³/h
Variable layer thickness: 20 µm - 75 µm, in 1 µm increments
Minimum feature size: 140 µm
Focus diameter: 70 µm - 100 µm
Max. scanning speed: 10 m/s
Average shielding gas consumption during build process: 0.6 l/min (argon)
Average shielding gas consumption during flooding: 70 l/min (argon)
Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW
Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar
Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm
Machine weight (without / with powder): 700 kg, 750 kg with powder
Operated with molybdenum!
Laser hours: 2383
Rsdpfeu Ebufox Abhsn
Condition: used
Scope of delivery: (see photo)
(Subject to changes and errors in technical data and specifications!)
For further questions, we will be happy to assist you by phone.
Mali oglas
Borken
868 km
3D tiskalnik
3DGENCEF420
Klic
Stanje: rabljeno, 3DGENCE
Model: Industry F420
Technical Data:
Build volume: 380 × 380 × 420 mm (60,648 cm³)
External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm
Printing system: Dual extruder equipped with cleaning system
+ Interchangeable nozzle head
Filament diameter: 1.75 mm
Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK
Support material: soluble support material ESM-10, HIPS
Filament chamber: 4 slots for filament with automatic changeover system
Print head temperature (max.): 500°C
Print bed temperature (max.): 180°C
Build chamber temperature (max.): 180°C (active heating)
Filament chamber temperature (max.): 50°C
Rjdpewnpbgsfx Abhen
Condition: used
Scope of delivery: (see pictures)
Weight: 350 kg
(Specifications subject to change; errors and omissions excepted!)
Feel free to contact us by phone for further questions.
Written orders possible via email or fax.
Mali oglas
Fleurus
910 km
3D tiskalnik
MassivitM1800 Pro
Klic
Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, skupna dolžina: 1.450 mm, skupna višina: 1.800 mm, skupna širina: 1.100 mm, vrsta vhodnega toka: trifazni, skupna masa: 3.000 kg, trajanje garancije: 12 meseci, širina mize: 1.450 mm, kapaciteta rezervoarja: 19 l, dolžina mize: 1.100 mm, teža obdelovanca (maks.): 150 kg, CENA
95.000 EUR (brez DDV)
STORITVE VKLJUČENE V CENO:
- Lesena transportna zaboj za mednarodno pošiljanje
- Montaža in kalibracija, ki ju opravi nekdanji zaposleni podjetja Massivit, certificiran za sisteme Massivit
- Izobraževanje operaterjev na lokaciji, ki ga izvaja nekdanji zaposleni podjetja Massivit, certificiran za sisteme Massivit
- Pov-installacijska daljinska tehnična podpora za strojno in programsko opremo (proizvodnja g-kode)
- Vključena 1-letna garancija
Profesionalna montaža, ki jo izvaja nekdanji zaposleni podjetja Massivit, certificiran za sisteme Massivit.
Možnost izdelave vzorčnih izpisov po naročilu
OPIS STROJA
Industrijski 3D-tiskalnik velikih dimenzij Massivit M1800 Pro, letnik 2018, strokovno obnovljen in v popolnoma delujočem stanju.
Montaža, izobraževanje operaterjev in tehnična podpora po montaži so vključeni in jih zagotavlja neposredno certificirano osebje Massivit. To zagotavlja pravilno postavitev, optimalno kalibracijo in hiter, zanesljiv zagon proizvodnje.
Stroj je opremljen z dvema neodvisnima tiskalnima glavama in ponuja gradbeni volumen 145 × 111 × 180 cm, kar ga naredi primernega za izdelavo prevelikih delov, kalupov, glavnih modelov in razstavnih elementov.
Sistem deluje s tehnologijo GDP (Gel Dispensing Printing) z UV-strjevanjem, ki omogoča hitro izdelavo velikih komponent z zmanjšano potrebo po podporah, kar ima za posledico manjšo porabo materiala in skrajšan čas naknadne obdelave.
Tiskalnik je bil obnovljen z originalno specifikacijo komponent in je bil deležen popolne mehanske poravnave, kalibracije ter funkcionalnega testiranja. Ogled stroja pod napetostjo je možen po dogovoru.
Tipične uporabe vključujejo vizualno komunikacijo, avtomobilske in navtične komponente, arhitekturne elemente, industrijsko prototipiranje, grajenje scenografij ter izdelavo kompozitnih kalupov.
TEHNIČNI PODATKI
Tip stroja: Industrijski 3D-tiskalnik velikega formata
Proizvajalec: Massivit
Model: M1800 Pro
Letnik izdelave: 2018
Gradbeni volumen: 145 × 111 × 180 cm
Tiskalni sistem: Dve neodvisni tiskalni glavi
Tehnologija: GDP – UV-strjevanje gel depozicij
Potrebne podpore: Zmanjšane
Maksimalna višina izdelka: 180 cm
Teža stroja: pribl. 3.000 kg
Električni priključek: trifazni
Kompatibilnost materialov: Dimengel 90, Dimengel 100, Dimengel 300 Transparent
Kapaciteta rezervoarja materiala: 19 L
Stanje: Strokovno obnovljeno
Funkcionalnost: Popolnoma delujoč, možno preizkusiti pod napetostjo
PODROBNOSTI OBNOVE
Redpoxx S Disfx Abhjn
- Razpršilniki obnovljeni z novimi statorji, ležaji in sklopkami
- Hidravlična črpalka obnovljena z novim statorjem
- Sistem filtracije gela obnovljen z nameščenimi novimi filtri
- UV-moduli za strjevanje testirani in kalibrirani
- Napenjalni jermeni XYZ poravnani in opravljena popolna poravnava mize
- Popolna funkcionalnost sistema obnovljena in preverjena pred prodajo
CENA
95.000 EUR (brez DDV)
Mali oglas
Hardt
546 km
3D skener VL500
Optisches 3D KoordinatenmessgerätVL500
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BC120058, Leto izdelave: 2022, obratovalne ure: 260 h, Skoraj nov 3D skener, model VL500 proizvajalca Keyence, na voljo po ugodni ceni. Naprava je popolnoma funkcionalna in bo na prodaj ob koncu marca 2026. Idealna in cenovno dostopna možnost za izvedbo površinskih skenov tehničnih komponent. Ločljivost: 0,001 mm; ponovljivost: 0,002 mm; merilna natančnost: ±0,01 mm. Nova cena je bila več kot 80.000 €.
Rjdpfxox Dy Iao Abhen
Mali oglas
Borken
868 km
Industrijski 3D-tiskalnik+CLEAN MATIC 31
StratasysFortus 450 mc
Klic
Stanje: zelo dobro (rabljeno), Stratasys
Stratasys Fortus 450mc Industrial 3D Printer +
Krumm Tec CLEAN MATIC 3150
+ Transformer – Complete System
Description:
The Stratasys Fortus 450mc is a high-end, industrial 3D printer from the FDM (Fused Deposition Modeling) series.
It is used worldwide for prototype manufacturing, small batch production, mechanical engineering,
the automotive industry, medical technology, and aerospace applications.
For sale is a complete industrial 3D printing system consisting of:
- Stratasys Fortus 450mc (3D Production System)
- Krumm Tec CLEAN MATIC 3150 cleaning station for support material
- Badger Magnetics 8 kVA transformer (suitable for EU power grids)
The system comes from professional use and was employed
for the production of high-quality functional parts and prototypes.
Main features of the Fortus 450mc:
- Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm
- Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM*
Rodpfx Aox D Uqijbhjn
- Very high dimensional accuracy and repeatability
- Network capable, touchscreen, easy operation
- Ideal for prototyping, small series production, tool making, jigs and fixtures
(*depending on material licenses)
Technical data Fortus 450mc:
- Voltage: 120/208 V, 3-phase (transformer included for EU operation)
- Power consumption: 18 A
- Dimensions approx.: 127 × 91 × 196 cm
- Software version, according to display: 6.2.6624.0
Krumm Tec CLEAN MATIC 3150:
- Model: CM 3150 US/PS
- 4 kW, 400 V, 50 Hz, 16 A
- Ideal for removal of SR-30 / SUP706 support material
- Weight: 140 kg
Total weight approx.: 600–700 kg
Important note:
"The table shown in the photos is not included in the sale."
Scope of delivery:
- Stratasys Fortus 450mc
- Krumm Tec CLEAN MATIC 3150 cleaning station
- Badger Magnetics 8 kVA transformer
(Technical data subject to change and errors excepted!)
Further questions can gladly be answered by phone.
Mali oglas
Moncalieri
580 km
DWS UV sušilna enota XL
DWSUV Oven XL
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D362931, Leto izdelave: 2023, skupna dolžina: 500 mm, skupna višina: 400 mm, skupna širina: 510 mm, skupna masa: 80 kg, vhodna napetost: 220 V, moč: 0,3 kW (0,41 KM), L’unità di polimerizzazione UV DWS XL è un dispositivo professionale di grande formato, raccomandato per stampanti 3D SLA dal produttore italiano DWS. La macchina di polimerizzazione XL è dotata di una potente sorgente luminosa UV che garantisce prestazioni affidabili in termini di distribuzione del calore e della luce. Grazie all’elevata precisione e intensità, gli oggetti stampati possono essere polimerizzati in pochi minuti, con processo completamente automatizzato.
Oltre al modello XL, la gamma DWS comprende anche le unità di polimerizzazione S2 e M, che si differenziano per dimensioni e volume di polimerizzazione.
La DWS UV Curing Unit XL offre un volume di polimerizzazione notevole, progettato appositamente per le dimensioni della piattaforma della serie DWS XPRO. La macchina è equipaggiata con un timer che consente all’operatore di impostare il tempo di polimerizzazione desiderato (fino a 180 minuti). Al contempo, la macchina si distingue per facilità d’uso, comandi intuitivi ed un design ergonomico. Inoltre, sono presenti sistemi di sicurezza studiati, come il meccanismo intelligente di blocco porta e la ventilazione forzata interna, per garantire comfort e sicurezza all’utente.
La DWS UV Curing Unit XL è progettata per applicazioni professionali nella stampa 3D SLA, rappresentando la fase finale del ciclo produttivo. In qualità di apparecchiatura di supporto, esegue la solidificazione secondaria dei modelli realizzati con stampanti SLA DWS. Anche se i modelli risultano perfettamente formati, necessitano comunque di un’ulteriore esposizione ad una specifica fonte di luce UV per completare la polimerizzazione e stabilizzare la struttura. Con la post-polimerizzazione, i modelli non solo acquisiscono una finitura liscia e curata, ma soprattutto diventano estremamente resistenti e durevoli.
Volume di polimerizzazione
La DWS UV Curing Unit XL offre un ampio volume di polimerizzazione di 500 x 400 x 510 mm, in grado di alloggiare una piattaforma completa delle stampanti DWS XPRO S, XPRO SL, XPRO Q e XPRO QL, inclusi i modelli HR.
Comandi
La DWS UV Curing Unit XL presenta comandi semplici e pratici, per un’esperienza di utilizzo fluida e immediata. L’avvio avviene tramite un classico pulsante di accensione/spegnimento. L’unità è inoltre equipaggiata con display OLED da 2.4", che permette di impostare il tempo di polimerizzazione fino a 180 minuti, più che sufficiente per batch di parti stampate SLA di grandi dimensioni.
Aspetto e applicazioni
La DWS UV Curing Unit XL si presenta con corpo bianco e doppia porta dotata di finestre trasparenti rosa. L’estetica solida, unita al design ergonomico, rende la macchina ideale per numerose applicazioni professionali come prototipazione, produzione di parti finite, gioielleria, odontoiatria digitale, settore automobilistico, aerospaziale e altro ancora.
Rsdpfx Aox Ehg Hsbhjn
Le dimensioni esterne dell’unità sono 761 x 705 x 806,5 mm. Il peso è di circa 78 kg.
Prezzo
Il prezzo della DWS UV Curing Unit XL è di $21.490, una cifra adeguata considerando volume di lavoro, funzionalità ed efficienza.
Caratteristiche tecniche principali:
- Volume di polimerizzazione: 500 x 400 x 510 mm
- Impostazione timer: da 0 a 180 minuti
- Ventilazione: forzata all’interno
- Display: OLED 2.4"
- Dimensioni interne: 670 x 660 x 590 mm
- Produttore: DWS
- Paese di produzione: Italia
- Apertura sicura della porta: Sì
- Sorgente luminosa: LED UV
- Dimensioni esterne: 761 x 705 x 806,5 mm
- Consumo elettrico: 300W
- Alimentazione: 100
Mali oglas
Moncalieri
580 km
Naprava za strjevanje za SLA 3D tiskalnik
DWSUV Oven S2
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D362931, Leto izdelave: 2023, skupna dolžina: 265 mm, skupna višina: 300 mm, skupna širina: 330 mm, skupna masa: 12 kg, vhodna napetost: 220 V, moč: 0,05 kW (0,07 KM), L’unità di polimerizzazione DWS UV S2 è un dispositivo professionale consigliato per stampanti 3D SLA dal produttore italiano DWS. La macchina S2 è progettata con una potente sorgente luminosa UV che garantisce prestazioni affidabili in termini di distribuzione uniforme di calore e luce. Grazie all’elevata precisione e intensità, gli oggetti stampati possono essere polimerizzati in pochi minuti, con automazione completa del processo.
Oltre al modello S2, la gamma DWS comprende anche le unità di polimerizzazione M e XL, che si differenziano per dimensioni e volume di lavoro.
La DWS UV Curing Unit S2 offre il volume di polimerizzazione più contenuto, adatto alla polimerizzazione di singoli modelli. È dotata di un timer che consente all’utente di impostare il tempo esatto di processo (fino a 30 min). Contemporaneamente, la macchina si distingue per facilità d’uso, comandi intuitivi e dimensioni compatte. Include inoltre funzioni di sicurezza intelligenti, come il sistema di blocco porta automatico e la ventilazione interna forzata per preservare la sicurezza e la praticità dell’operatore.
La DWS UV Curing Unit S2 è pensata per applicazioni professionali nella stampa 3D SLA come fase finale del processo produttivo. Come apparecchiatura ausiliaria, esegue la solidificazione secondaria dei modelli realizzati con stampanti DWS SLA. Anche se perfettamente modellati, i pezzi stampati necessitano infatti di un’ulteriore esposizione a una precisa sorgente UV per completare la polimerizzazione e stabilizzare la struttura. Con il post-curing, il modello non solo acquisisce una superficie raffinata e omogenea, ma soprattutto ottiene resistenza e durabilità elevate.
Volume di polimerizzazione
La DWS UV Curing Unit S2 dispone di un capiente volume di lavoro pari a 160 x 160 x 160 mm, ideale per la polimerizzazione efficiente di modelli singoli.
Comandi
L’unità è dotata di comandi utente semplici e intuitivi per un’esperienza di utilizzo fluida. L’avvio avviene tramite un classico pulsante on/off. Il timer preciso consente d’impostare la durata del ciclo fino a 30 minuti, tempo più che sufficiente per la maggior parte dei pezzi prodotti con tecnologia SLA.
La DWS UV Curing Unit S2 presenta un corpo macchina bianco con sportello caratterizzato da una finestra trasparente rosa. L’aspetto solido, unito al design ergonomico, la rende ideale per diverse applicazioni professionali: prototipazione, produzione di parti finite, gioielleria, odontoiatria digitale, settore automobilistico, aerospaziale e molte altre.
Le dimensioni esterne sono 265 x 300 x 330 mm, con un peso di circa 11,8 kg.
Prezzo
Il prezzo della DWS UV Curing Unit S2 è di € 1.990,00, in linea con il valore offerto in termini di volume di lavoro, funzionalità ed efficienza.
Rsdpfex Ehfpsx Abhsn
Specifiche tecniche:
- Volume di polimerizzazione: 160 x 160 x 160 mm
- Impostazione timer: 0–30 minuti
- Ventilazione: ventilazione forzata interna
- Dimensioni interne: 216 x 266 x 219 mm
- Produttore: DWS
- Paese di produzione: Italia
- Sicurezza apertura porta: sì
- Sorgente luminosa: UV LED
- Dimensioni esterne: 265 x 300 x 330 mm
- Consumo energetico: 50W
- Alimentazione: 90–264 V / 50–60 Hz
- Peso: 11,8 kg
Mali oglas
Kemating
252 km
3D tiskalnik
EVO-techEVO-lizer A4
Klic
Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: EVO-lizer A4, Leto izdelave: 2015, obratovalne ure: 4.413 h, skupna dolžina: 720 mm, skupna višina: 720 mm, skupna širina: 540 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 64 kg, vhodna napetost: 230 V, vhodni tok: 4 A, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, natančnost pozicioniranja: 0,05 mm, širina mize: 270 mm, kapaciteta rezervoarja: 11 l, dolžina mize: 195 mm, raven hrupa: 46 dB, število tiskalnih glav: 2, Rabljeni FDM 3D-tiskalnik EVO-lizer A4
Rsdsxu I R Djpfx Abhen
Podatki o napravi:
Dimenzije tiskalnika (Š x G x V)……………..540 x 720 x 710 mm
Teža……………..…….64 kg
Priključni podatki……………..……230 VAC; 50/60 Hz; 4A
Temperatura okolja……………..15 – 35 °C
Relativna vlažnost……………30 - 70 %
Akustični podatki:
Način mirovanja……………40 dBA
Obratovalni način (1 m razdalje)…………….46 dBA
Obratovalni način (40 cm razdalje, odprta vrata)……………62 dBA
Tehnični podatki:
Velikost tiskalne površine (Š x G x V)……………..…………270 x 195 x 205 mm
Minimalna debelina sloja……………..…0,10 mm
Natančnost pozicioniranja…………….0,05 mm
Temperaturno območje šobe…………….160 – 260 °C
Temperaturno območje grelne plošče……………..30 – 100 °C
Material filamenta……………ABS, PLA
Premer filamenta……………..1,75 mm
Programska oprema/Slicing program…………….EVO-lizer
Mali oglas
Poljska
710 km
3D-tiskalnik
HPJet Fusion 540
Klic
Stanje: dober (rabljeno), HP JET FUSION 540 MULTI-JET FUNKCIJSKI BARVNI 3D TISKALNIK
Model: VCVRA-1804. Tehnologija tiskanja: Multi Jet Fusion (MJF). Stroj je pod napetostjo, po celovitem pregledu uradnega servisa proizvajalca. Material: PA12 (poliamid). Gradbeni volumen: 332 × 190 × 248 mm. Hitrost tiskanja: 0,08 mm. Ločljivost: 1200 dpi. Hitrost tiskanja: do 1817 cm³/h. Čas tiskanja (cela površina): 14–20 h. Obnova prahu: do 80 %. Moč: 6300 W. Napajanje: 200–240 V, 50/60 Hz, 36 A. Dimenzije: 1565 × 955 × 1505 mm. Teža: 650 kg (v uporabi). Raven hrupa: 72–80 dB. Povezljivost: Ethernet (Gigabit). Datoteke: 3MF, STL, OBJ, VRML v2. Programska oprema: HP SmartStream 3D Build Manager, Command Center. Serijska št.: M2K86A
Redpox H Tl Hefx Abhjn
Mali oglas
Sulgen
469 km
3D tiskalnik
EnvisiontecEnvisionOne XL
Klic
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 200 h, skupna dolžina: 406 mm, skupna višina: 1.117 mm, skupna širina: 406 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 52 kg, vhodna napetost: 220 V, vhodni tok: 5 A, vhodna frekvenca: 50 Hz, natančnost pozicioniranja: 0,093 mm, dolžina podajanja os X: 180 mm, dolžina pomika po osi Y: 101 mm, dolžina podajanja os Z: 330 mm, EnvisionTEC Envision One cDLM XL – High-precision 3D Printer (Demonstration unit, like new)
For sale: EnvisionTEC Envision One cDLM XL 3D printer – a professional high-end system for accurate and rapid production of prototypes, functional parts, dental models, and small series.
Condition:
- Demonstration unit, very lightly used
- Technically and visually as new
- Clean, well-maintained, and ready for immediate operation
Technical specifications:
- Model: Envision One cDLM XL
- Technology: Continuous Digital Light Manufacturing (cDLM) / DLP
- Build volume: 180 × 101 × 330 mm (X × Y × Z)
- Native XY resolution: 93 µm
- Enhanced XY resolution: up to approx. 60 µm
- Layer thickness: approx. 25 – 150 µm (depending on material)
- Print speed: up to approx. 45 mm/h
- Light source: High-power DLP projector, 385 nm UV LED
- Z-axis: Dual linear guide for high precision
- Power supply: 110/220 V, 50/60 Hz, 5 A
- Data formats/software: STL, Envision One RP Software
Rodpfx Aexzdp Aobhen
External dimensions & weight:
- Device dimensions: approx. 406 × 406 × 1,118 mm
- Weight: approx. 52 kg
Advantages:
- Very high level of detail and excellent surface quality
- Ideal for dental applications, product design, industry, prototyping, and small series production
- Fast printing times thanks to cDLM technology
- Large build volume for a desktop SLA/DLP unit
- Robust, precise, industrial-grade
Note:
Perfect for companies, laboratories, and workshops seeking a reliable, professional, and almost new device.
Inspection possible.
Dražba
Dražba končana
Jönköpings län
1.230 km
3D-tiskalnik
MarkforgedFX 20
Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4a99688d-3381-4979-8e5b-43, Leto izdelave: 2022, obratovalne ure: 164 h, lastna masa: 530 kg, gradbena višina: 525 mm, gradbena širina: 400 mm, Oprema: CE označba, Submission of a bid obligates collection by the deadline of 28.02.2026!
Hardly used demonstration machine!
TECHNICAL DETAILS
Build Volume (Single Nozzle): 525 × 400 × 400 mm
Build Volume (Multi-Nozzle): 500 × 400 × 400 mm
Build Chamber Volume: 84 l
Layer Height: min. 50 µm, max. 250 µm
Accuracy: ±125 µm or ±0.0015 mm per mm
Process: Fused Filament Fabrication, Continuous Fiber Reinforcement
MACHINE DETAILS
Temperature Control: up to 200 °C
Extrusion System: Direct-drive printhead with two nozzles
Materials
Plastics: Vega™, ULTEM™ 9085 Filament, Onyx®, Onyx FR
Continuous Fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR
Dimensions & Weight
Machine Dimensions: 1,325 × 900 × 1,925 mm
Weight: 530 kg
Printhead Weight: 3 kg
Operating Hours: 164 h
EQUIPMENT
Eiger Software
Direct-drive printhead with three nozzles
Compatible with various plastics and fiber-reinforced materials
Rodpfx Asx Ttifjbhjn
Ethernet connection
IEC/UL/CSA 62368-1 Certification
CE marking
Conforms to EU Machinery Directive
Mali oglas
Borken
868 km
Selektivni laserski stroj za taljenje
SLM SolutionsSLM 280 HL 3D Drucker
Klic
Stanje: zelo dobro (rabljeno), SLM Solutions
Model: SLM 280 HL
For sale is a professional metal 3D printing system, type SLM 280 HL, from SLM Solutions (Lübeck).
The machine comes from industrial use, is fully documented, and will be delivered with its nameplate data and technical manuals.
The SLM 280 HL is designed for 24/7 operation and is suitable for aluminium, stainless steel, tool steel, cobalt-chrome, and many other metallic powder materials.
Included components:
- AMC 330 WB Air Management/Filter Module
- HRS050-AF-20-M Chiller Unit
- DC 1.5 KAESER Compressor / Compressed Air Module
Rjdpfxsx Agt He Abhsn
Technical Data (Excerpt)
Machine
- Weight: 1,245 kg
- Dimensions (without accessories):
Width: 1.7 m
Height: 2.0 m
Depth: 1.1 m
- Build volume: 280 × 280 × 250 mm (optional 350 mm depth)
- Electrical connection:
Power consumption: 15 A
Building-side fuse: 32 A
Control voltage: 24 V DC
Heating capacity: 1,200 W
Protection class: IP50
Power consumption:
4.7 kW (Single Optic)
8.0 kW (Twin Optic)
Media Supply
Argon
- Operating pressure: 6 bar
- Flow rate (purging): approx. 130 l/min
- Flow rate (build process): approx. 3 l/min
- Quality: DIN EN ISO 14175 – Class 4.6 (≥99.996 %)
Compressed Air
- Operating pressure: 6 bar
- Flow rate:
without nitrogen generator: approx. 100 l/min
with nitrogen generator: approx. 500 l/min
- Quality: ISO 8573-1:2010 Class 1:4:1
Cooling Water
- Medium: distilled water
Primary circuit:
Pressure: 4 bar
Flow rate: 0.3 l/min
Supply temperature: 18–20 °C
Secondary circuit:
min. pressure: 2 bar
max. temp.: 40 °C
Volume: 1.7 m³/h
pH value: 5.8–7.0
Operating Conditions
- Ambient temperature: 20–25 °C
- max. relative humidity: 60 %
- Designed for continuous operation (24 h)
- (Weight approx. 1,245 kg)
Important Note:
“The table shown in the photos is not included in the sale.”
Condition: used
Scope of delivery: (See picture)
- SLM 280 HL machine
- Control cabinet
- Process chamber
- Internal operating panel with screen
- Available documentation, parts lists, manuals
(Changes and errors in the technical data and specifications reserved!)
Further questions can be answered by phone.
Mali oglas
Nizozemska
969 km
3D tiskalnik za plastiko
3DGENCEIndustry F420
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, skupna višina: 1.950 mm, skupna masa: 350 kg, število osi: 3, Splošni podatki
Mere širina 940 mm
Rodpfx Aex D Sqmjbhen
Mere globina 900 mm
Mere višina 1950 mm
Teža stroja 350 kg
Glavni pogon
Število osi 3
Dodatna oprema
Dvojna ekstrudijska glava na vsakem tiskalnem modulu, opremljena s čistilnim sistemom za tiskalno glavo za tiskanje kompleksnih geometrij z vodotopno podporo.
3 tiskalni moduli z različnimi temperaturnimi specifikacijami, posebej razviti za posamezne materiale.
Ta 3-osni 3DGence Industry F420 je bil proizveden leta 2021 in uporablja tehnologijo Fused Filament Fabrication z dvojno ekstrudijsko glavo ter sistemom za čiščenje za zahtevne geometrije. Vključuje tri tiskalne module za različne materiale, delovno komoro dimenzij 380 × 380 × 420 mm in dosega temperature tiskalne glave do 500°C. Če iščete visoko kakovostne možnosti 3D tiska, vam priporočamo nakup stroja 3DGence Industry F420. Za dodatne informacije o tem stroju nas kontaktirajte.
Vrste uporabe
3D tiskanje
Mali oglas
Beograd
450 km
3D tiskalnik
3D SystemsProJet MJP2500 Pro
Klic
Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30091329802, Leto izdelave: 2016, obratovalne ure: 1.209 h, skupna dolžina: 1.120 mm, skupna višina: 1.070 mm, skupna širina: 740 mm, skupna masa: 211 kg, vhodna napetost: 220 V, vhodni tok: 10 A, delovna širina: 295 mm, delovna višina: 142 mm, delovna dolžina: 211 mm, Ta stroj je bil rahlo uporabljen v našem razstavnem salonu in za izdelavo vzorcev za stranke.
ProJet MJP 2500 Plus izdeluje natančne toge in elastične dele z resnično CAD-natančnostjo, vrhunsko površinsko obdelavo ter visoko kakovostjo robov, zaradi česar je idealen za funkcionalno testiranje.
Ključne zmogljivosti:
* Tiskanje v visoki ločljivosti: Omogoča tiskanje v načinu Ultra High Definition (UHD) s podrobnostmi do 300 mikronov.
* Natančnost in kakovost: Zagotavlja resnično CAD-natančnost z vrhunsko površinsko obdelavo in visoko kakovostjo robov.
Združljivost materialov:
Ta tiskalnik je združljiv s široko in vsestransko ponudbo materialov VisiJet, vključno z:
* Inženirskimi in trdnimi plastiki.
* Široko paleto trdnih materialov v prozornih in neprozornih barvah.
* Materiali z lastnostmi, ki posnemajo inženirske plastike.
* Elastičnimi in temperaturno obstojnimi materiali.
Rodpfx Ajxg Rhcjbhsn
Tipične uporabe:
* Modeliranje konceptov, preverjanje oblike in prileganja.
* Funkcionalno prototipiranje in analiza pretoka tekočin.
* Hitro izdelavo orodij, priprave in vpenjalne naprave.
* Medicinske aplikacije, ki zahtevajo certifikate USP razred VI in/ali ISO 10993 za biokompatibilnost.
Dražba
Dražba končana
Région flamande
955 km
3D tiskalnik
StratasysFortus 450MC
Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K00219, skupna masa: 601 kg, gradbena višina: 406 mm, gradbena širina: 355 mm, La soumission d'une offre vous oblige à récupérer l'article avant le 14.01.2026 !
DÉTAILS TECHNIQUES
Volume de construction : 406 mm x 355 mm x 406 mm
Épaisseurs de couche : 0,127 mm, 0,178 mm, 0,254 mm, 0,330 mm
Volume des cassettes pour matériaux de construction et de support : 1 510 cm³ / 3 020 cm³
Précision atteignable : ±0,127 mm ou ±0,0015 mm/mm
Précision sur l’axe Z : −0,000 / +hauteur de couche
DÉTAILS DE LA MACHINE
Dimensions du système : 1 295 mm x 902 mm x 1 984 mm
Poids : 601 kg
Tension d'entrée : 420 V
Tension d’alimentation : 208 V AC
Phases : 3
Fréquence : 50/60 Hz
Intensité nominale : 18 A
Connexion réseau : 10/100 Base-T
Protocole : Ethernet
Rodjx Hwgnjpfx Abhsn
Normes : CE, cTUVus, RCM, EAC, FCC Part B
ÉQUIPEMENT
Logiciel Insight™
Logiciel Control Center™
Compatibilité GrabCAD Print
Nettoyeur de matériaux de support SCA 1200HT
Compatible avec les matériaux iSQUARED : ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010
Remarque : une des quatre cassettes doit être révisée.
Dražba
Dražba končana
Niederösterreich
259 km
3D tiskalnik
RobozeARGO 500
Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 200 h, temperatura: 450 °C, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 500 mm, HIGHLIGHTS
- High temperatures – for maximum performance
- Fast start-up – production volume can be preheated in just over an hour
- Large print volume – for high demand of high-end parts made from high-performance polymers
- Precise manufacturing – patented mechatronic X and Y handling
- Greater stability on large prints – thanks to ARGO vacuum bed system
- Improved control – automatic self-levelling bed, dual gearboxes in dual extruder, advanced sensor system
- Spool temperature control – for dry polymers and filaments
TECHNICAL DETAILS
Extrusion temperature: 450 °C
Heated chamber temperature: 180 °C
Heated chamber parameters: humidity, pressure, temperature
Polymers and composites: PEEK, ULTEM(TM) AM9085F, FLEX-TPU, FUNCTIONAL-NYLON, STRONG-ABS, PP, PC-LEXANTM AMHI240F, ABS-ESD, ULTRA-PLA, Carbon PEEK and Carbon PA PRO
Build volume: 500 x 500 x 500 mm
Accuracy X, Y / Z: 10 / 25 µm
Layer resolution quality/speed: 0.225 / 0.300 mm
Print speed: 5,000 mm/min
Rjdpfjwd Sgdsx Abhen
Extruder nozzle 2-B: 0.4 mm and 0.6 mm
Extruder nozzle 2-HA: 0.4 mm and 0.6 mm
Extruder nozzle 3-HSA: 0.4 mm and 0.6 mm
MACHINE DETAILS
Dimensions: 1,935 x 1,436 x 2,375 mm
Weight: 1,700 kg
Connection: 15 kVA / 400 V AC / 50 Hz
DESCRIPTION
- Robust structure made of aluminium bars and steel cover
- System with precision balls and ground steel linear guides
- Mechatronic movement on X and Y axes with hardened C5 helical rack and pinion
- Z-axis movement with precision C6 ball screw system
- Moving components and aluminium supports machined by CNC precision processes
- Vacuum system for adhesion of polymer layers
- Automatic build plate levelling
- Safety system with door lock
- Integrated HT dryer up to 120 °C with automatic filament loading
- Controlled build chamber with forced ventilation
- Pneumatic auxiliary system
Hyperspeed – optional upgrade available (€30,000)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Sankt Andrä-Wördern
259 km
3D tiskalnik
Union TechPILOT 250 Stereolitograph
Klic
Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, obratovalne ure: 300 h, The price applies to the machine from the demo center, including an additional tank and a second build platform.
- Build volume: 250*250*250 mm
- Scanning speeds up to 12 m/s
- Layer thickness from 0.05 mm
- Accuracy of +/- 0.1% over segment length
- Granite return frame
- Control of key operating parameters
- Pump-fed refill capability
Rjdpfx Aehvim Eobhen
- High-performance vacuum recoating system
- Key components from Spectra-Physics, Advanced Optowave, SCANLAB, and Panasonic
The machine features an open material platform – consumables from all manufacturers can be sourced directly and processed.
Transport, commissioning, and consumables are not included in the price. The local UnionTech partner handles installation, training, and service!
Mali oglas
Sankt Andrä-Wördern
259 km
3D tiskalnik
RobozeARGO 500 Hyperspeed Dual Extruder
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address.
Rodsibikwepfx Abhjn
Mali oglas
Arnstorf
315 km
3D tiskalnik
StratasysFortus 450mc
Klic
Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 155-11000, Leto izdelave: 2015, obratovalne ure: 24.000 h, skupna dolžina: 1.295 mm, skupna višina: 1.984 mm, skupna širina: 902 mm, Naprodaj je Stratasys Fortus 450mc iz naše proizvodnje. Gre za profesionalni FDM proizvodni sistem za industrijsko uporabo. Naprava je bila popolnoma na novo servisirana in je tehnično brezhibna ter takoj pripravljena za uporabo, z integriranim kompresorjem.
Po želji je mogoče napravo kupiti tudi s potrošnim materialom:
trenutno:
400 kg ABS-ivory
400 kg ABS črn
SR-30
Gradbene plošče
Šobe, ...
Rodpfx Aboxauckjhen
Maksimalna gradbena prostornina: 406 x 355 x 406 mm (X, Y, Z)
Gradbena komora: ogrevana, zaprta za konstantno kakovost tiska
Materialna kompatibilnost: ABS-M30, ABS-ESD, ABS-M30i, ASA, ULTEM 1010
Debelina sloja: izbirno glede na aplikacijo (0,127 – 0,330 mm)
Ponovljivost točnosti: ±0,127 mm ali ±0,0015 mm/mm
Mali oglas
Češka republika
370 km
3D tiskalnik
StratasysEden 500 V
Klic
Stanje: rabljeno, Funkcionalnost: nefunkcionalno, Leto izdelave: 2007, 3D tiskalnik je popoln, vendar so tiskalne glave obrabljene.
Redpfow Inmaox Abhen
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.














































































































































































































