Nit Ročna Vrtalnik nakup rabljenega (8.888)

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), Drilling diameter: 13 mm Spindle mount: B 16 Nwodpfx Agod D Th Hjxjf Speed with reversible switch (left/right): 0 - 840 rpm Power input: 450 W For alternating current: 230 V

Stanje: dober (rabljeno), Counterborers, twist drills, drill bits for drilling rig, drilling center - Quantity: 53x NC twist drills with draw-in thread - Diameters: 8x Ø32 mm 9x Ø34 mm 8x Ø36 mm Nwjdpfx Agsc Innksxsf 6x Ø38 mm 1x Ø39 mm 8x Ø40 mm 7x Ø41 mm 6x Ø42 mm - Shank: Morse taper MK4 - Type: HSS (High-Speed Steel) - As per photos - Sale: only as a complete set - Weight: 84 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 60 kW (81,58 KM), vrsta goriva: električni, obratovalna teža: 500 kg, največja dovoljena obremenitev: 500 kg, Leto izdelave: 2020, obratovalne ure: 400 h, številka stroja/vozila: 2020-2704-0001, Vakuumsko nadzorovana peč za plazemsko nitriranje Nwedpjxz Divofx Agxof

Stanje: zelo dobro (rabljeno), CAMAM MO-4A Double-Sided Oscillating Drilling Machine Nedotp Tnzopfx Agxowf Number of spindles per side: 3 Tool holder: 16 mm basket chuck Oscillation adjustable within the range of 0–75 mm Distance between spindles: 50–900 mm Two spindle speeds: 4500 / 9000 rpm Two pneumatic workpiece clamps per side

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, hidravlična lokasta žaga za okrogle materiale = 350 mm Dolžina žaginega lista: 550 mm Moč: 2,8 kW 6 hodnih hitrosti cca: 36 / 45 / 58 / 72 / 90 / 116 hodov/min Hitrost rezanja cca: 11 / 13 / 17 / 22 / 36 / 34 m/min Območje reza Nsdpjy Ey Avsfx Agxswf ploščati materiali cca: 350 x 200 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 10 t, hod: 115 mm, širina mize: 470 mm, dolžina mize: 360 mm, globina grla: 190 mm, tabela razdalj do bata: 210 mm, skupna dolžina: 1.470 mm, skupna širina: 1.400 mm, skupna višina: 1.800 mm, skupna masa: 430 kg, Manuelle spindelpress C-stativ Nsdpfjyzy R Eox Agxowf

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.650 mm, skupna višina: 2.000 mm, skupna širina: 700 mm, dolžina žaginega lista: 740 mm, All commercial workshop machines and equipment from the metalworking shop are being sold due to a closure: Bandsaw FENDO 250 A €2,900.00 — Dimensions (LxWxH): 2300x1860x1150 mm Power hacksaw AEG AG63K €1,500.00 — Dimensions (LxWxH): 1650x700x2000 mm Lathe ø 360 mm at €2,900.00 — Dimensions (LxWxH): 5000x950x1620 mm Small hardening furnace €900.00 — Dimensions (LxWxH): 900x650x1350 mm Notching machine Comaca €1,900.00 — Dimensions (LxWxH): 1150x900x1350 mm Various exhibition stand elements, dimensions as per photo. €500.00 For sale, among other items, is a robust and precise VDF A208 lathe, ideal for workshops, metalworking, or training facilities. Technical specifications (approx.): - Lathe A208 - Swing over bed: approx. 430 mm - Centre height: approx. 210 mm - Distance between centres: depends on model (e.g. 1000 / 1500 / 2000 mm) - Leadscrew and feed shaft for thread cutting - Solid cast machine base Nwsdpfsyrdtdex Agxof - Precise and reliable German quality machine This lathe is of very heavy-duty construction, runs smoothly, and is excellently suited for precision turning up to 360 mm. It has consistently been operated by the same person for the past 15 years. VDF machines are renowned for their durability and high manufacturing quality. Condition: used, in working order. Viewing by appointment possible. Metal bandsaw AEG AG63K. Used but functional machine, ideal for workshops and metalworking. Robust construction, suitable for cutting profiles and metal materials. Condition: used, with normal signs of wear, but in full working order. Dimensions (LxWxH): 165 x 70 x 200 cm. Price negotiable. Viewing possible by arrangement. Available for immediate collection. For further information and photos, please get in touch.

Stanje: skoraj kot novo (rabljeno), Tehnični podatki Vrtalna zmogljivost v jeklu (premer): 32 mm Iztek: 320 mm Vrtalni hod: 170 mm Vpenjalni MK: 3 Območje vrtljajev: Nwjdpfx Aevzgm Ijgxef Velikost mize: 570 x 480 mm Skupna potrebna moč: 1,6 kW Teža: 650 kg Dimenzije: 1200 x 800 x 2200 mm

Stanje: skoraj kot novo (rabljeno), Stolpni vrtalni stroj Gillardon tip GB 30 V, hitrost vrtenja 60 -1800 obr/min, avtomatski pomik, zelo dobro ohranjen, vpenjalni stožec MK 3. Nodsxpxbcepfx Agxowf

Leto izdelave: 1985, stanje: dober (rabljeno), Bench drill TB 15 Spindle speed 360 - 3600 rpm via V-belt pulley Nedpsk D Hrdofx Agxswf Spindle taper MK 2 with intermediate table Power supply 400 Volt

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, ALZMETALL AB 3ES Column Drilling Machine Drilling capacity in steel St 60: 28 mm Drilling capacity in cast iron GG 20: 35 mm Drilling performance in St 60: 35 mm Nodpfx Aowg Hdvogxowf Spindle taper: MK 3 Throat depth: 290 mm Quill stroke: 160 mm Table travel: 592 mm Column diameter: 115 mm Clamping surface: 510 x 300 mm Spindle speed: 130–1750 rpm Machine weight: approx. 400 kg Year of manufacture: 1976 With coolant system!

Stanje: rabljeno, Leto izdelave: 1968, Donau hitra radialna vrtalna stroj tip DR 32 Število obratov 60–1800 /min Izvleček 600 mm Osnovna plošča 100 x 1400 x 110 mm Naprava za rezanje navojev Sistem za hlajenje Strojna svetilka Hitromenjalni nosilec z vložki Strojni primež Nwodpfxox Hgkvs Agxsf

Stanje: dober (rabljeno), FLOTT E-3 Column Drilling Machine Nodporic Tbsfx Agxewf Throat depth: 260 mm Drilling stroke: 125 mm Speed range: 125 - 2,500 rpm Clamping table dimensions: 420 x 340 mm Column diameter: 110 mm Tool holder: MT3

Stanje: dober (rabljeno), Leto izdelave: 1959, HESTIKA 22N manual lever-operated turret lathe Nedpfxerm R Dus Agxewf

Stanje: rabljeno, Used column drill by Ixion Speed range: 400–3000 rpm MK2 spindle taper Njdpfehcr I Esx Agxewf Drilling capacity up to max. 18 mm

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Tip HBS 2 Leto izdelave 2002 Dolžina rezila žage 500 mm Nwsdpfx Aoy Agf Eogxof Moč 1,3 kW Število hodov 62 / 125 / min Območje reza okroglega cca. 210 mm Območje reza ploščatega cca. 240 x 190 mm

Stanje: zelo dobro (rabljeno), Drilling capacity: 18 mm Spindle mount: FEHLMANN Nsdpfx Ajlyrcmegxswf Spindle speeds: 135–4500 rpm Throat depth: 225 mm Cross table: 530 x 255 mm Digital readout Accessories MARCELS MASCHINEN CH

Stanje: novo, Leto izdelave: 2024, Drilling capacity in steel (diameter): 35 mm Throat depth: 320 mm Nwsdpowlvlaefx Agxef Drilling stroke: 150 mm Spindle taper: MT 4 Table size: 500 x 400 mm Spindle speeds: 75 – 3,010 rpm Quill feed range: 0.1 / 0.15 / 0.22 / 0.33 mm/rev Quill travel: 150 mm Operating voltage: 400 V Total power requirement: 1.8 kW Machine weight: approx. 275 kg Space requirement: approx. 0.70 x 1.00 x 1.95 m - Factory No.: 138050673 - Electromagnetic feed - Tapping device - Machine vice, 150 mm - Two T-slot bolts, 14 mm - 9-piece drill bit set 14.5 mm – 30 mm, MT2 / MT3 - Cutting oil spray

Stanje: novo, Leto izdelave: 2024, Drilling capacity in steel (diameter): 32 mm Throat depth: 245 mm Nsdjwlvk Nspfx Agxswf Drilling stroke: 135 mm Spindle taper: MT 3 Table size: 410 x 380 mm Spindle speeds: 10 - 2,100 rpm Operating voltage: 400 V Total power requirement: 1.1 kW Machine weight: approx. 210 kg Space requirement: approx. 0.7 x 1.8 x 1.75 m - Tapping device - Machine vice 150 mm - 9-piece drill bit set 14.5 mm - 30 mm, MT 2 / MT 3 - Cutting oil spray

Stanje: novo, Condition new Delivery time approx. 2-4 weeks from order Country of origin: Poland Price: €1,595 Drilling capacity in structural steel: 23 mm Shank: 19 mm Weldon Motor power: 1.6 kW Thread-cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 500 mm Weight: 17 kg Maximum drilling capacity: 23 mm Maximum annular cutter capacity: 50 mm Maximum cutting depth: 75 mm Stroke: 190 mm Motor speed: 160-250 / 390-580 rpm Minimum workpiece thickness: 8 mm The PRO-52T magnetic drill is designed for hole cutting and thread cutting operations. Its powerful motor with variable speed enables milling up to 50 mm and drilling up to 23 mm. Both forward and reverse operation, together with the new Promotech threading system, allow thread cutting up to M20. The two-speed gearbox with stepless speed adjustment enables optimal speed settings based on diameter, steel grade, or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. The innovative 360-degree LED indicator assists with proper machine operation and enhances workplace safety. Features and Benefits: • Powerful motor with robust 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains consistent speed regardless of load changes • Capable of tapping through and blind holes • Milling with carbide or HSS cutters, or drilling • Electronic clutch • Overload and overheat protection • Rigid construction extends tool life Nedpjyrht Ijfx Agxewf • Tilt sensor stops the motor if the machine tips • 360-degree status monitoring system displays the drill’s condition and provides safety and diagnostic information, e.g. worn brushes • Innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) ensures maximum holding force on thin materials • Energy Saving Base (ESB) consumes only 50% power when the motor is idle • Semi-automatic wedge adjustment allows easy, quick, precise and reproducible guidance setting without specialist knowledge or experience • Intuitive control panel at the top of the drill • Large coolant tank Standard delivery set: • Drilling machine • Plastic case • Handles (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 6 mm Allen key • 5 mm Allen key with handle • 2.5 mm Allen key • 8 mm open-end wrench • Tool box • User manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 ltr Vacuum pad Pneumatic ejector Pipe fastening

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in structural steel: 12 mm Spindle mount: 19 mm Weldon Motor output: 0.4 kW Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm This special battery-powered magnetic base drilling machine is designed for use in remote locations where no mains power is available. Nedpfjyrhtnex Agxewf The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that displays signals in green and red to indicate the current status of the drill and provide safety notifications. This machine can be used on convex (minimum diameter – 80 mm) and concave (minimum diameter 1000 mm) materials. With the PRO-36 PM Battery equipped with the CAS LiHD 10.0 Ah battery pack, up to 47 holes (D=20 mm) can be drilled in 10 mm steel plates. Features and benefits: • LED monitoring system flashes green when insufficient adhesion is detected, for example due to a gap or workpieces that are too thin • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor in the event of machine failure or magnetic detachment • Control panel is fitted with so-called "vandalism-proof" illuminated motor start/stop buttons Standard delivery set: • Cordless drill with cooling system • Plastic case • 4.0 Ah battery • Handle (3 pieces) • Safety strap • 4 mm Allen key with handle • Operating instructions OPTIONS (PRICES ON REQUEST): Charger Pressurised cooling system Vacuum pad Vacuum pump Pneumatic ejector

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1995 Drilling capacity in structural steel: 25 mm Tool holder: 19 mm Weldon Motor power: 1.6 kW Thread cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 505 mm Weight: 18 kg Nwodpfoyrhrwox Agxjf Max. drilling capacity: 25 mm Max. annular cutter capacity: 70 mm Max. cutting depth: 75 mm Stroke: 190 mm Motor speed: 120-190 / 290-450 rpm Min. workpiece thickness: 8 mm The PRO-72T magnetic drilling machine is suitable for drilling and thread cutting. The powerful motor with variable speed allows milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to the clockwise and counterclockwise rotation, threads up to M20 can be cut with the new threading system from Promotech. The two-speed gearbox with stepless speed adjustment enables the optimal setting depending on hole diameter, steel grade, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display simplifies operation and increases operator safety. Features and benefits: • Powerful motor with robust 2-speed gearbox • Electronic speed stabilization system (ESSS) for constant RPM regardless of load changes • Thread cutting in through and blind holes • Milling with carbide or HSS cutters as well as drilling • Electronic clutch • Overload and overheat protection • Sturdy design for longer tool life • Tilt sensor stops the motor in case of machine breakaway • 360° visualization indicates current machine status and provides safety and diagnostic information, e.g., worn carbon brushes • Innovative, lightweight smart magnet • Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials • Energy-saving base (ESB) consumes only 50% power in standby • Semi-automatic spline adjustment for easy, fast, precise, and repeatable guide clearance setting without expertise • Intuitive control panel at the top of the drilling machine • Large coolant tank Standard scope of supply: • Magnetic drilling machine • Plastic case • Handles (3 pieces) • MK3 arbor with 19 mm (3/4") Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 5-mm T-handle hex key • 4-mm hex key • 2.5-mm hex key • 8-mm combination wrench • Operating manual OPTIONS (PRICES ON REQUEST): Pressure cooling system Pipe attachment

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1,695 Drilling capacity in structural steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.45 kW Length: 316 mm Width: 235 mm Height: 328 mm Weight: 11.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm The PRO-36 Battery is a magnetic drilling machine designed for drilling holes up to 36 mm in diameter using annular cutters. The machine can also drill holes of up to 12 mm in diameter when using twist drills. The cordless drilling machine is equipped with an LED monitoring system that displays signals in green and red to indicate the current machine status and provide safety information. The control panel features “vandal-resistant” illuminated start/stop switches (green/red). Features and benefits: • LED monitoring system indicates the current machine status and provides safety information • The LED monitoring system flashes green if insufficient adhesion is detected, e.g. caused by a gap or workpieces that are too thin • The double guide system ensures exceptional precision and maintenance-free operation • Overload protection • Magnetic field sensor automatically stops the motor when holding force is insufficient • Magnetic Field Shape Control (MFSC) provides maximum holding strength, even on thin materials • The Energy Saving Base (ESB) consumes only 50% of its power when the motor is not running • Innovative intelligent magnet with reduced weight Standard delivery package: • Cordless drilling machine • Plastic case • 4.0 Ah battery • Handle (3 pcs) • Safety strap • Cooling system • 4 mm Allen key with handle • User manual OPTIONS (PRICES ON REQUEST): • Charger • Pipe attachment • Pressure cooling system • Vacuum pad • Vacuum pump • Pneumatic ejector Njdpfx Ajyrhqtogxjwf

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1,055 Njdpfxoyrhp Ae Agxowf Drilling capacity in structural steel: 12 mm Tool holder: 19 mm Weldon Motor power: 1.1 kW Length: 400 mm Width: 126 mm Height: 185 mm Weight: 10 kg Max. drill capacity: 12 mm Max. annular cutter capacity: 40 mm Max. cutting depth: 40 mm Stroke: 45 mm Motor speed: 370 rpm Min. workpiece thickness: 6 mm The PRO-40 AD is a low-profile magnetic drilling machine that can be used even in the tightest spaces. It is the perfect solution for any application where conventional magnetic drills are too large for confined areas. Its powerful motor enables drilling holes up to 40 mm in diameter and up to 40 mm deep. An innovative, extremely strong magnetic base with a high performance on air gaps allows operation even on painted, corroded, or thin surfaces. The magnetic adhesion control (MPAC) protects both the drill and the operator by preventing the motor from being activated if the holding force is dangerously low when working on too thin or unsuitable surfaces. The PRO-40 AD is compatible with both carbide and HSS cutters as well as twist drills with 19.05 mm Weldon shank. Features & Benefits: • Ultra-compact magnetic drilling machine with only 185 mm height • Extremely strong magnetic base with 1009 kgf (9900 N) holding force • Compact and lightweight design—only 10 kg • Annular cutting capacity up to 40 mm • Suitable for twist drills with 19.05 mm (3/4") Weldon shank • Extended stroke of 45 mm allows cutting depths up to 40 mm • Magnetic field shape control (MFSC) for maximum holding force on thin materials • Integrated swarf protection • Removable feed handle (with ratchet), can be mounted on either side • Carry handle for easy transport • Integrated cooling system with coolant bottle Standard set includes: • Drilling machine • Plastic carry case • Handle • 6.34 x 102 mm pilot pin for HSS cutters • 7.98 x 103 mm pilot pin for TCT cutters • Safety strap • 4 mm Allen key • Operating instructions OPTIONS (PRICES ON REQUEST): Cutter extension 250ml coolant bottle

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Njdpfx Agsyrhppjxswf Price: €1,445 Holder: 19 mm Weldon Motor output: 1 kW Length: 307 mm Width: 221 mm Height: 317 mm Weight: 13.5 kg Max. core drilling capacity: 36 mm Max. cutting depth: 51 mm Stroke: 70 mm Motor speed: 350 rpm Min. workpiece thickness: 6 mm The new PRO-36 AUTO is equipped with a unique LED monitoring system that displays the current status of the drill and provides additional safety and diagnostic information. The Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation in automatic mode. The drill control continuously selects the most effective operating conditions based on the relationship between motor load, feed rate, and the permissible cutting parameter range for the specific tool type and bore diameter. This results in longer tool life for HSS and TCT cutters and improved machine performance. Countersinking and machining thin workpieces is only possible in manual mode when clamping force is insufficient (blinking green LED). A safety strap protects the machine from falling in the event of a loss of magnetic hold. Features and benefits: • LED monitoring system displays the current status of the drill and provides safety and diagnostic data. • The LED system blinks green if inadequate adhesion is detected, such as with gaps or thin workpieces. • Auto Feed Smart Drive optimizes milling parameters for each tool, depending on type (HSS or TCT) and hole diameter from 12 mm to 36 mm, significantly extending tool life. • The tilt sensor stops the motor if the machine tips. • Dual-rod guide system ensures exceptional rigidity and backlash-free operation. • Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials. • Automatic feed control stops the machine as soon as the cutter passes through the workpiece. • Protection against automatic restart after power failure. • Compact, robust design with ultra-lightweight construction (13.5 kg). Standard scope of delivery: • Drill • Metal case • Safety strap • Coolant tank • Chip guard • 4 mm Allen key • Operating manual