3D tiskalnik nakup rabljenega (150)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Tiskarski stroji in tiskarske naprave 3D tiskalnik
Mali oglas
Sankt Andrä-Wördern
259 km
3D tiskalnik
RobozeARGO 500 Hyperspeed Dual Extruder
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address.
Kljdpfeibikwox Adkjp
Mali oglas
Sankt Andrä-Wördern
259 km
3D tiskalnik
Weirather SondermaschinenbauWLS3232 Polyamid SLS Anlage
Pokliči
Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 200 h, skupna dolžina: 2.128 mm, skupna širina: 1.294 mm, vhodna napetost: 400 V, trajanje garancije: 6 meseci, vhodni tok: 32 A, laserska moč: 100 W, kapaciteta rezervoarja: 32 l, volumenski pretok: 20 m³/h, Stroj za lasersko sintranje poliamida z dvema izmenljivima posodama in razpakirno postajo. Stroj si je mogoče kadar koli ogledati in preizkusiti v demo centru BIBUS-Austria. Poleg tega ima sistem hitro menjavo med vlečno rezilo in premaznim valjem – sistem je vedno na najnovejšem tehnološkem nivoju, saj so se izvajale stalne nadgradnje.
Kjdpoqwkypjfx Adkjlp
Mali oglas
Kemating
252 km
3D tiskalnik
EVO-techEVO-lizer A4
Pokliči
Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: EVO-lizer A4, Leto izdelave: 2015, obratovalne ure: 4.413 h, skupna dolžina: 720 mm, skupna višina: 720 mm, skupna širina: 540 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 64 kg, vhodna napetost: 230 V, vhodni tok: 4 A, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, natančnost pozicioniranja: 0,05 mm, širina mize: 270 mm, kapaciteta rezervoarja: 11 l, dolžina mize: 195 mm, raven hrupa: 46 dB, število tiskalnih glav: 2, Rabljeni FDM 3D-tiskalnik EVO-lizer A4
Podatki o napravi:
Dimenzije tiskalnika (Š x G x V)……………..540 x 720 x 710 mm
Teža……………..…….64 kg
Priključni podatki……………..……230 VAC; 50/60 Hz; 4A
Temperatura okolja……………..15 – 35 °C
Relativna vlažnost……………30 - 70 %
Akustični podatki:
Način mirovanja……………40 dBA
Kjdpsxu I R Dsfx Adkolp
Obratovalni način (1 m razdalje)…………….46 dBA
Obratovalni način (40 cm razdalje, odprta vrata)……………62 dBA
Tehnični podatki:
Velikost tiskalne površine (Š x G x V)……………..…………270 x 195 x 205 mm
Minimalna debelina sloja……………..…0,10 mm
Natančnost pozicioniranja…………….0,05 mm
Temperaturno območje šobe…………….160 – 260 °C
Temperaturno območje grelne plošče……………..30 – 100 °C
Material filamenta……………ABS, PLA
Premer filamenta……………..1,75 mm
Programska oprema/Slicing program…………….EVO-lizer

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
София
768 km
3D-tiskalnik
StratasysObjet Eden 260VS
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 322276, Leto izdelave: 2016, obratovalne ure: 1.202 h, skupna dolžina: 870 mm, skupna višina: 1.200 mm, skupna širina: 735 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 250 kg, dolžina podajanja os X: 255 mm, dolžina pomika po osi Y: 252 mm, dolžina podajanja os Z: 200 mm, moč: 1,5 kW (2,04 KM), Wir bieten zum Verkauf einen Stratasys Objet Eden 260VS PolyJet 3D-Drucker an, der ursprünglich 2017 gekauft wurde und sich in einem ausgezeichneten Betriebszustand befindet. Der Drucker wurde in unserem Architekturbüro hauptsächlich zur Herstellung hochdetaillierter Architekturmodelle unserer Projekte genutzt. Dadurch verfügt das Gerät über äußerst geringe Betriebsstunden und wurde stets mit größter Sorgfalt behandelt. Insgesamt wurden lediglich 1202 Druckstunden verzeichnet, was für ein professionelles PolyJet-System dieses Typs außergewöhnlich wenig ist.
Zustand:
- Voll funktionsfähig und betriebsbereit
- Sehr geringe Nutzung – nur 1202 Druckstunden
- Sowohl optisch als auch mechanisch in exzellentem Zustand
- Einsatz ausschließlich in einem sauberen, professionellen Studio
- Regelmäßige vorbeugende Wartung durchgeführt
- Wartungs- und Serviceprotokolle sind auf Anfrage verfügbar
Der Drucker wurde vor und nach jedem Druckvorgang mit von Stratasys freigegebenen Reinigungsmitteln gesäubert und gemäß der Herstellervorgaben gepflegt. Vor einigen Jahren wurde das Gerät fachgerecht gereinigt und nach dem vorgesehenen Verfahren in den Langzeit-Standby-/Lagerungsmodus versetzt und seither sicher gelagert. Während seiner Lebensdauer wurde lediglich die Vakuumpumpe getauscht; die Reparatur erfolgte damals problemlos, seither arbeitet der Drucker einwandfrei. Weitere Störungen sind nicht aufgetreten.
Zum Lieferumfang gehören:
- Stratasys Objet Eden 260VS PolyJet 3D-Drucker
- Reinigungs-/Waschstation mit Hochdruckreiniger
- Ersatzteile und Zubehör wie auf den Fotos abgebildet
- Wartungswerkzeuge
Klodpfxsyt Rk Ej Adksp
- Diverse Filter und Ersatzkomponenten
- Der Drucker wird mit dem originalen Stratasys HASP-Lizenzdongle inklusive installierter Materialpakete geliefert.
Weitere Fotos und Betriebsprotokolle können auf Anfrage zur Verfügung gestellt werden.
Mali oglas
Greven
858 km
3D-tiskalnik
3D SYSTEMSProJet2500
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3009F484403, Leto izdelave: 2022, obratovalne ure: 217 h, Ponujamo ta 3D tiskalnik 3D Systems ProJet2500, letnik 05/2022, za prodajo.
Tiskalnik ima le 217 ur tiskanja (8 kg materiala), skoraj kot nov.
Za vprašanja ali dodatne informacije nam lahko pošljete sporočilo ali nas pokličete.
Kedjyfv Dbopfx Adkelp
Odkrijte več rabljenih strojev
Mali oglas
Koblenz
724 km
SLS 3D tiskalnik
formlabsFuse 1
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 134 h, The printer has demonstrably operated very reliably. This can be verified through the documented print jobs. It has been regularly serviced and is in perfect technical condition.
Viewing under power and with a test print is possible. The quality of the calibration prints speaks for itself. [See pictures]
Delivery via freight forwarder can be arranged upon request.
Scope of delivery:
- Fuse 1
- Fuse Sift
- Delfin industrial vacuum cleaner for Formlabs Fuse Sift
- Cleaning set (brushes)
- Formlabs Fuse Series Build Chamber 230V
- Fuse Series Powder Cartridge
- Formlabs Fuse Series Printer Stand
- 2x Formlabs Fuse 1 Optical Cassette
- 8 KG reconditioned PA12 powder
- 4 KG new PA12 powder
Klodpsyr Tdljfx Adkep
If you have any questions or require further information, please feel free to send us a message or give us a call.
Mali oglas
Gdańsk
953 km
3D-tiskalnik
INONE3DFGF 800 3D Printer
Pokliči
Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna dolžina: 1.200 mm, skupna višina: 1.550 mm, skupna širina: 1.138 mm, skupna masa: 350 kg, vhodna napetost: 220 V, premer šobe: 3 mm, dolžina podajanja os X: 800 mm, dolžina pomika po osi Y: 800 mm, dolžina podajanja os Z: 800 mm, moč: 5 kW (6,80 KM), zahteva za prostor dolžina: 1.200 mm, potrebna višina: 1.550 mm, potrebna širina: 1.138 mm, Oprema: kompresor, INONE3D FGF800 (WXF-FGF800) – Przemysłowa, całkowicie zabudowana drukarka 3D FGF
Klodpfxsyv Edaj Adkjp
INONE3D FGF800 to nowa, przemysłowa drukarka 3D na rok 2025, zaprojektowana w technologii Fused Granulate Fabrication (FGF), pozwalająca na ekonomiczne drukowanie wielkoformatowe bezpośrednio z granulatu tworzyw sztucznych. To idealne rozwiązanie do produkcji dużych prototypów, części technicznych, form oraz elementów funkcjonalnych, gdzie istotne są niższe koszty materiału i wysoka wydajność.
Model posiada całkowicie zabudowaną konstrukcję, co poprawia stabilność procesu, zwiększa bezpieczeństwo oraz zapewnia bardziej kontrolowane środowisko druku. Dzięki dużemu polu roboczemu 800 × 800 × 800 mm, obsłudze granulatu o frakcji 1–5 mm oraz średnicy dyszy od 0,6 do 3,0 mm, FGF800 nadaje się zarówno do szybkiej produkcji wielkogabarytowej, jak i do bardziej precyzyjnych zastosowań.
Parametry techniczne:
Technologia: Fused Granulate Fabrication (FGF)
Model: WXF-FGF800
Pole robocze: 800 × 800 × 800 mm
Średnica dyszy: 0,6–3,0 mm
Wielkość granulatu: 1–5 mm
Maksymalna moc robocza: 5 kW
Napięcie zasilania: 220 V
Masa własna: 350 kg
Wymiary maszyny: 1200 × 1138 × 1550 mm
Rok produkcji: 2025
Gwarancja: 12 miesięcy
Konstrukcja: Całkowicie zabudowana drukarka 3D
Dostępność: 2 sztuki na stanie
Mali oglas
Češka republika
370 km
3D tiskalnik
StratasysF 900
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.504 h, Oprema: ABS, kompresor, Tiskalnik je popolnoma funkcionalen in še vedno priključen na elektriko. Ni bil pogosto uporabljen, le 1504 delovnih ur. Na voljo so vse licenčne materiale za modele iz leta 2019. Novi komplet PM je na lokaciji in bo nameščen tik pred odpremo tiskalnika novemu kupcu. Enota za odstranjevanje podpor EFT-900 je na voljo.
Kljdpfx Aew Imk Redkep
Mali oglas
Nizozemska
969 km
3D tiskalnik za plastiko
3DGENCEIndustry F420
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, skupna višina: 1.950 mm, skupna masa: 350 kg, število osi: 3, Splošni podatki
Mere širina 940 mm
Mere globina 900 mm
Mere višina 1950 mm
Teža stroja 350 kg
Glavni pogon
Število osi 3
Klsdex D Sqmepfx Adkep
Dodatna oprema
Dvojna ekstrudijska glava na vsakem tiskalnem modulu, opremljena s čistilnim sistemom za tiskalno glavo za tiskanje kompleksnih geometrij z vodotopno podporo.
3 tiskalni moduli z različnimi temperaturnimi specifikacijami, posebej razviti za posamezne materiale.
Ta 3-osni 3DGence Industry F420 je bil proizveden leta 2021 in uporablja tehnologijo Fused Filament Fabrication z dvojno ekstrudijsko glavo ter sistemom za čiščenje za zahtevne geometrije. Vključuje tri tiskalne module za različne materiale, delovno komoro dimenzij 380 × 380 × 420 mm in dosega temperature tiskalne glave do 500°C. Če iščete visoko kakovostne možnosti 3D tiska, vam priporočamo nakup stroja 3DGence Industry F420. Za dodatne informacije o tem stroju nas kontaktirajte.
Vrste uporabe
3D tiskanje
Mali oglas
Gdańsk
953 km
3D-tiskalnik
UltimakerFactor 4
Pokliči
Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 2 h, Ultimaker Factor 4 – jak nowy / stan ekspozycyjny
Urządzenie ma jedynie 2 godziny pracy drukarki (10 godzin całkowitego czasu pracy na gorąco). Służyło wyłącznie jako drukarka demonstracyjna dla klienta, który ostatecznie nie zdecydował się na zakup. Maszyna nie była wykorzystywana w produkcji i znajduje się w stanie jak nowym.
Brak oryginalnego opakowania. Pełna gwarancja 12 miesięcy.
Specyfikacja UltiMaker Factor 4
Właściwości druku:
Technologia: Fused Deposition Modeling (FDM) – technologia osadzania topionego materiału
Kedpfx Adoyvhwijkslp
System ekstruzji: Podwójna ekstruzja, głowica drukująca z bezpośrednim napędem z unikalnym automatycznym systemem unoszenia dysz i wymiennymi rdzeniami drukującymi
Objętość robocza: Druk jednego materiału: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in)
Druk dwóch materiałów: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in)
Średnica filamentu: 2,85 mm
Profile drukowania: powyżej 14 materiałów UltiMaker, ponad 250 materiałów w UltiMaker Marketplace
Dokładność wymiarowa: ± 0,2 mm lub ± 0,2% nominalnej długości cechy
Szczegółowe warunki: ultimaker.com/factor4
Właściwości sprzętowe:
Rozdzielczość XYZ: 6,25, 7,8, 2,5 mikrona
Czujnik położenia: Optyczny
Stół roboczy: Elastyczna płyta robocza pokryta PEI
Temperatura stołu: do 120 °C (248 °F)
Temperatura komory: Aktywnie kontrolowana do 70 °C (158 °F) ze stabilnością temperatury dyszy:
± 3 °C (5,4 °F) dla temperatur < 50 °C (122 °F)
± 5 °C (9 °F) dla temperatur < 70 °C (158 °F)
Kompensacja przepływu ekstruzji: Zamknięta pętla kontrolna
Maksymalna temperatura ekstruzji:
280 °C (536 °F): Rdzeń AA, BB, DD
300 °C (572 °F): Rdzeń CC
340 °C (644 °F): Rdzeń HT
Wentylatory zamkniętego obiegu: Filtracja powietrza, wentylatory recyrkulacyjne, chłodzenie wydruków, chłodzenie rdzenia
Zgodność z głowicami drukującymi:
Rdzeń AA (0,25 mm, 0,4 mm, 0,8 mm)
Rdzeń BB (0,4 mm, 0,8 mm)
Rdzeń CC (0,4 mm, 0,6 mm)
Rdzeń DD (0,4 mm) – dostępność w wybranych regionach
Rdzeń HT (0,6 mm)
System obsługi materiału:
Pojemność: 6 miejsc z rozpoznawaniem NFC (maks. szpula 1 kg)
Kontrola wilgotności: Średnia wilgotność względna < 15% we wszystkich warunkach pracy
System filtracji mikrocząstek: Filtr HEPA H13
Emisja UFP & LZO: Filamenty UltiMaker poniżej limitów UL-2904
Monitoring: Kamera HD HDR 1920 x 1080 px
Wyświetlacz: Ekran dotykowy 7" (1024 x 600 px)
Specyfikacja UltiMaker Factor 4
Łączność: Wi-Fi 2,4 i 5 GHz (IEEE 802.11a/b/g/n/ac), LAN: Gigabit Ethernet, USB 2.0
System na module: NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC
Kontroler czasu rzeczywistego: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM
Zasilanie: 100 – 240 V AC, 50 – 60 Hz, max. 6A
Wymiary fizyczne:
Wymiary: 695 x 605 x 1287 mm (27.5 x 24 x 51 in)
Waga: 120 kg (265 lbs)
Wymiary transportowe: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in)
Waga transportowa: 137 kg (309 lbs)
Warunki środowiskowe:
Głośność pracy: < 50 dBA
Środowisko pracy: Temperatura: 18–30 °C (64–86 °F), wilgotność: 30–70% RH
Przechowywanie: Temperatura: 5–40 °C (41–104 °F), wilgotność: 20–90% RH
Oprogramowanie:
Przygotowanie zleceń: UltiMaker Cura 5.7.1 lub nowszy
Zarządzanie zleceniami: UltiMaker Digital Factory
Obsługiwane formaty plików: UltiMaker Cura: STL, OBJ, 3MF
Formaty do druku: G, GCODE, UFP, STEP
Wymagania systemowe: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB zalecane)
Raportowanie procesu drukowania: Obsługiwane
Mali oglas
Kemating
252 km
Industrijski FFF - 3D tiskalnik
HAGE3D140L-C
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 140L-C, Leto izdelave: 2022, obratovalne ure: 5.854 h, skupna dolžina: 1.450 mm, skupna višina: 1.040 mm, skupna širina: 1.250 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 380 kg, vhodna napetost: 400 V, vhodni tok: 12 A, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 10 °C, okoljska temperatura (maks.): 40 °C, električna varovalka: 16 A, širina mize: 500 mm, kapaciteta rezervoarja: 140 l, dolžina mize: 700 mm, moč: 8,3 kW (11,28 KM), največja hitrost vožnje: 24.000 mm/min, število tiskalnih glav: 2, Refurbished industrial fused filament fabrication (FFF) printer
Includes:
- 140L-C printer unit
- Vibration-damped platform
- License for slicing software (Simplify3D)
Original price: €73,800
General technical specifications:
Model: HAGE 3D-140L-C
Year of manufacture: 2022
Operating hours: 5,854 h
Printing technology: FFF (fused filament fabrication)
Filament diameter: 1.75 mm; open-material system
Build area (L x W): 700 mm x 500 mm
Build height: max. 400 mm
Build volume: max. 140,000 cm³
Dimensions and weight:
Length: 1,450 mm
Width: 1,250 mm
Height: approx. 1,040 mm
Weight: approx. 380 kg
Temperature specifications:
Max. printhead surface temperature: 300°C (optionally 450°C)
Max. build plate surface temperature: 180°C
Max. build chamber temperature: 85°C
Min. operating temperature: +10°C
Max. operating temperature (ambient): +40°C
Electrical data:
AC input: 400 V / 50 Hz
Power supply: 24 V DC
Connectivity: USB 3.0 / Ethernet
Printing characteristics:
X-axis speed: max. 400 mm/s
Y-axis speed: max. 400 mm/s
Z-axis speed: max. 300 mm/min
Ksdsxuh Nyjpfx Adkslp
XY-plane printing accuracy: < 0.1 mm
Print control: Industrial controller (Sigmatek)
Software: HAGE3D
All documentation available
Platform:
1,450 x 1,250 x 600 mm (LxWxH)
Incl. storage compartments
Incl. vibration-damping machine feet
Mali oglas
München
340 km
3D tiskalnik (DLP)
envisionTECPERFACTORY® III Mini SXGA+
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 2.974 h, skupna dolžina: 730 mm, skupna višina: 1.350 mm, skupna širina: 480 mm, skupna masa: 85 kg, vhodna napetost: 240 V, vhodni tok: 2 A, vhodna frekvenca: 50 Hz, zahteva za prostor dolžina: 730 mm, potrebna višina: 1.350 mm, potrebna širina: 480 mm, Envisiontec Perfatory III MiniMultilens z dvema izmenljivima lečama je znan po svoji natančnosti, gladkih površinah in finih podrobnostih pri uporabi z različnimi sistemi smol. Je prava profesionalna naprava za najvišje zahteve glede kakovosti.
Izmenljive leče omogočajo naslednje prostornine gradnje:
Kjdpfxex Rb Iws Adkslp
- f60: 84x63x230mm z nativno XY ločljivostjo 60µm in ERM 30µm
- f85: 44x33x230mm z nativno XY ločljivostjo 32µm in ERM 16µm
Z ločljivost: 20-150µm, odvisno od materiala/smole
Svetlobni spektri: UV (
Mali oglas
Planegg
347 km
3D-tiskalnik
HPMJF 4200
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SG76G34001, Leto izdelave: 2017, obratovalne ure: 11.062 h, Trindo Digitalmanufaktur GmbH is selling a well-established production system of the HP Multi Jet Fusion class. The system is designed for industrial multi-shift operation and has been continuously maintained.
System components:
- 1x HP Jet Fusion 4200 Printer (M0E85A)
- 1x HP Jet Fusion Processing Station (M0E89A) with Fast Cooling Function
- 3x HP Jet Fusion Build Units (M0E92A) for maximized throughput
Service & Maintenance Status:
Active 3daas Contract: The machine is currently under an active HP Service Contract (3D-as-a-Service).
Benefit for the buyer: As the system has been continuously maintained by HP, the typically expensive and complex recertification by the manufacturer is not required when taking over or relocating the system.
Condition: Fully functional. All wear parts have been replaced at regular intervals by certified technicians under the service contract.
Production capacity:
Equipped with three build units, the system is optimized for high-throughput operation. This allows parallel scheduling of the following processes:
- Printing process (Build Unit 1)
- Cooling/unpacking phase in the processing station (Build Unit 2)
- Cleaning and refilling/setup time (Build Unit 3)
Klsdpfxeyiz Nqo Adkjp
Transfer conditions:
- Location: Munich (Trindo Digitalmanufaktur GmbH)
- Documentation: Maintenance logs and operating hours can be reviewed if there is justified interest.
- Inspection: System appraisal during ongoing operation is possible by prior arrangement.
Mali oglas
Westerlo
922 km
3D-tiskalnik
StratasysJ55 Prime
Pokliči
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: J5500144, Leto izdelave: 2020, obratovalne ure: 5.336 h, Stratasys J55 Prime profesionalni 3D tiskalnik PolyJet za tisk v polni barvi na voljo zaradi nadgradnje na večji proizvodni sistem. Stroj je bil profesionalno vzdrževan med obratovanjem in je primeren za oblikovalske studije, prototipne laboratorije, univerze ter raziskovalna okolja, ki zahtevajo visokokakovostne večmaterialne in barvne modele.
Tehnične specifikacije
Skupni delovni čas: cca 5.336 ur
Tiskalne glave so bile pred kratkim zamenjane (približno 250 ur uporabe)
Redno profesionalno servisiran v času uporabe
Stroj ni bil v uporabi približno 1 leto, zato je pred zagonom priporočljiv tehnični pregled
Prvotna vrednost sistema > 120.000 €
Vključena enota Stratasys ProAero Air Extractor (filter za zrak PolyJet)
Priložena Stratasys tehtnica / skener
Priloženi vsi standardni kabli in priključki
Zgodovina servisiranja je dokumentirana in na voljo
Tipične uporabe
Industrijsko oblikovanje in razvoj izdelkov
Arhitekturni in oblikovalski prototipi
Medicinski in izobraževalni modeli
Večmaterialno in barvno prototipiranje
Raziskave na področju aditivne proizvodnje
Ksdjytg Rzopfx Adkelp
Stroj si je mogoče ogledati po predhodnem dogovoru.
Lokacija prevzema: Belgija.
Za dodatne informacije, fotografije ali dogovor za ogled nas prosimo kontaktirajte.
Mali oglas
Montmeló
1.142 km
3D-tiskalnik
Massivit 3DMassivit 5000
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 70 h, skupna dolžina: 2.200 mm, skupna višina: 2.600 mm, skupna širina: 1.600 mm, vrsta vhodnega toka: trifazni, skupna masa: 2.500 kg, vhodna napetost: 230 V, vhodni tok: 10 A, priključek za stisnjen zrak: 6 letvica, vhodna frekvenca: 50 Hz, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 30 °C, volumenski pretok: 15 m³/h, Ponujamo ta rabljeni 3D tiskalnik (le 70 ur), model 5000 Massivit, letnik 2023.
Napajalna napetost: 220/380-240/415 V
Vrsta priklopa: 3W+N+PE
Nazivni tok: 10 A
Frekvenca: 50/60 Hz
Kratkostični tok: 5 kA
Tlak zraka: 6-8 bar
Pretok zraka: 250 L/min
Teža: 2500 kg
Če imate kakršnakoli vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.
Kjdpoyvhubefx Adkelp
Mali oglas
Dunaharaszti
340 km
3D tiskalnik Replicator Z18
Markerbot ReplicatorZ18
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z50009537, Leto izdelave: 2018, obratovalne ure: 167 h, skupna dolžina: 50 mm, skupna višina: 81 mm, skupna širina: 57 mm, vrsta vhodnega toka: Enosmerni tok, skupna masa: 41 kg, vhodna napetost: 220 V, širina mize: 305 mm, dolžina mize: 305 mm, For sale well below market price: a barely used (166 operating hours) professional Replicator Z18 3D printer.
• Extra-large print volume: 30.5 x 30.5 x 45.7 cm
• Supported by the new, user-friendly MakerBot Replicator 3D Printing Platform
• Cloud-based system with app support
• MakerBot Replicator Smart Extruder, advanced motion control, and axis design
• Integrated camera and diagnostics, assisted calibration
• Large build volume enables rapid prototyping and model production
• 11% larger print capacity compared to MakerBot Replicator 2
• Build volume: 25.2 x 19.9 x 15.0 cm (7,522 cm³)
• Create lifelike objects easily and quickly
• On-demand printing capability
• 100-micron resolution—print paper-thin layers
• Produce professional-quality, high-resolution prototypes and complex models
Kjdpfx Adoxt Er Ajkjlp
• Smooth-touch surface finish—no post-processing required
• Generate realistic prototypes and models for presentations
• 3.5” color LCD display
• Intuitive onboard user interface for a rich user experience
• Access your personal library and preview 3D files directly on the machine
• Integrated utility for printer setup and maintenance
• MakerBot Replicator Smart Extruder (print head)—easy to replace
• Detects filament depletion and automatically pauses printing
• Sends status updates to MakerBot Desktop and MakerBot Mobile app
• Built-in camera for print monitoring and sharing on MakerBot Thingiverse or social networks
• Mobile control
Mali oglas
Wassenaar
1.017 km
3d tiskalnik
EOSM400
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Zum Verkauf: EOS M400 – Hochleistungs-Metalldrucker für die Industrie
Diese EOS M400 ist ein hochmodernes System für den metallischen 3D-Druck und befindet sich am Standort des Kunden. Ausgestattet mit einem 1-kW-Laser bietet sie höchste Präzision und Produktivität für industrielle Anwendungen im Großformat.
Technische Daten:
• Laserleistung: 1 kW
• Technologie: Direktemetall-Lasersintern (DMLS)
Verarbeitbare Materialien:
Das System unterstützt eine Vielzahl von Werkstoffen und ist damit ideal für unterschiedlichste Branchen wie Luft- und Raumfahrt, Automobilindustrie und Medizintechnik. Kompatible Materialien:
• Nickelbasislegierungen: IN718_1, HX-1, IN625_1, IN939_1
• Aluminiumlegierungen: AlF357_1, AlSiMg_1
• Kupferlegierungen: CuCrZr_1, Cu_1
• Edelstähle: GP1_1, PH1_1
• Werkzeugstähle: MS1_1, SP2_1
• Titanlegierungen: Ti64_1, Ti64ELI_1, Ti64Grade23_1, TiGrade5_1, TiCP_1
• Individuelle Gasoptionen: CustomAr, CustomN2
• Kobalt-Chrom: MP1_1
Vorteile der EOS M400:
• Großes Bauvolumen für die industrielle Serienproduktion
• Hohe Laserleistung für maximale Geschwindigkeit und Präzision
• Breite Materialkompatibilität für flexible Einsatzmöglichkeiten
Inklusive Serviceleistungen:
• Transport & Installationsunterstützung: Auf Wunsch organisieren wir den sicheren Umzug und Aufbau bei Ihnen vor Ort.
• Expertenwartung: Flexible Servicepläne garantieren einen zuverlässigen Betrieb Ihrer Maschine.
Über Inframotion 3D (IM3D)
Inframotion 3D B.V. ist auf hochwertige, generalüberholte EOS-Additive-Manufacturing-Systeme mit umfassendem Support spezialisiert. Als einziger Anbieter mit Komplettlösungen für gebrauchte EOS-Anlagen stehen wir für zuverlässige Maschinen, maßgeschneiderte Dienstleistungen und Premium-Materialien für Ihre Fertigung.
Unser Angebot:
• Expertenservice: Installation, Wartung und Updates durch erfahrene Ex-EOS-Techniker
• Exklusive Materialien: Qualitäts-Verbrauchsmaterialien, getestet und für EOS-Systeme optimiert
• Rundum-Betreuung: Von Transport bis hin zu individuellen Wartungsplänen übernehmen wir alle Abläufe
Vertrauen Sie IM3D, um Ihre Fähigkeiten im metallischen 3D-Druck zuverlässig und effizient auszubauen.
Klsdpovq Sm Eofx Adksp
Kontaktieren Sie uns gerne für weitere Informationen oder eine unverbindliche Anfrage!
Mali oglas
Eindhoven
910 km
3D-tiskalnik
3D SystemsProjet MJP 2500 Plus
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 240 V, vhodni tok: 12 A, vhodna frekvenca: 60 Hz, Ponujamo zelo dobro vzdrževan 3D tiskalnik 3D Systems Projet MJP 2500 Plus, letnik 2022.
Kodpjyb R E Sefx Adkslp
Mali oglas
London
1.255 km
3D tiskalnik
3D systemsSLA IPRO 8000
Pokliči
Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2013, 3D tiskalnik SLA IPro 8000
Leto: 2013
Deluje, vendar potrebuje popoln servis in nekoga, ki pozna to opremo. Prejšnji kupec je za novega plačal £250.000! Priložena je potrošna smola.
Na voljo sta 2 stroja (model 8000), drugi je letnik 2017.
Še vedno v produkciji.
Ogled možen v Londonu.
Za več informacij me kontaktirajte.
Klodeyu Uxiopfx Adkop
Mali oglas
Wien
254 km
3D tiskalnik
MarkforgedX7
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 3.075 h, skupna dolžina: 483 mm, skupna višina: 914 mm, skupna širina: 564 mm, skupna masa: 48 kg, For sale is a Markforged X7 3D printer. The printer has only been used in a clean environment and is fully functional. Furthermore, both the extruder and print head were replaced recently, upgrading the printer to a Gen2 model. As a result, Turbo Print is also possible.
Kodpfxewhduus Adkelp
Mali oglas
Unterhaching
333 km
3D tiskalnik
StratasysF370
Pokliči
Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D31369, Leto izdelave: 2019, obratovalne ure: 73 h, skupna dolžina: 864 mm, skupna višina: 1.626 mm, skupna širina: 711 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 227 kg, vhodna napetost: 230 V, vhodni tok: 7 A, vhodna frekvenca: 50 Hz, širina mize: 355 mm, dolžina mize: 254 mm, gradbena višina: 355 mm, --- RARE OPPORTUNITY ---
Stratasys F370 for sale due to business closure. Barely used, with just 70 operating hours, it is essentially in mint condition. Ideal as an additional unit for existing machine parks or as a high-quality all-rounder for beginners.
The printer is currently packed and in storage. Before decommissioning, it was professionally inspected and serviced by the manufacturer’s authorized distributor. The latest exported cfg file can be provided upon request.
The F370 printer is designed for user-friendliness, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide range of materials for various 3D printing applications, including prototyping, tool and jig manufacturing, as well as low-volume end-part production.
Its compact footprint, quiet and safe operation—with no special requirements—make the F370 ideal for workshops, offices, or even classrooms.
Ksdpfx Aoxgh U Tsdkjlp
With soluble support material, even complex geometries with internal cavities can be produced—uncommon in this printer class. The four easily accessible material spool bays at the front (2x model & 2x support) enable rapid material changes.
Included software applications such as GrabCAD Print and Insight, automatic calibration, the integrated camera for remote print job monitoring from your computer, as well as an intuitive front control panel, complete the package.
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Borken
868 km
3D tiskalnik
EosEOS M270
Pokliči
Stanje: zelo dobro (rabljeno), EOS
Type: EOS M270
Metal Laser Sintering System
Laser Sintering Machine
Kljdpfx Adeu Ebpcskop
200 Watt Yb Fiber Laser
Material processed by the system: Tungsten
Laser hours: 8018
Usable build volume: 250 mm x 250 mm x 215 mm (including build platform)
Layer thickness: 20 μm or 40 μm
Precision optics: F-theta lens, high-speed scanner
The system has been retrofitted with a Scanlab hurrySCAN 30 for improved printing accuracy.
Focus diameter: 100 μm
Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm
Weight: approx. 1,130 kg
For additional technical information, please refer to the manufacturer.
Scope of delivery: EOS M270, chiller, and software
Condition: used
(Specifications subject to change and errors excepted!)
Further questions can be answered for you by phone.
Mali oglas
Borken
868 km
Tiskalnik SLS Laser-Sinter
EosEOSINT P 380
Pokliči
Stanje: zelo dobro (rabljeno), Eos EOSINT Plastic Laser Sintering System
We are offering an Eos EOSINT Plastic Laser Sintering System.
Model: Eos EOSINT P380
The following components are included with the EOS P380 system:
- Build chamber container
- Powder container
- Overflow container
- Cooler: Termo TEK Thermochiller, Type: 802-18644-3
- Unpacking piston
- Removal trolley
- 3DM 8-zone process chamber heating, 250°C
Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin
- Build volume: 350 mm x 350 mm x 610 mm
- Voltage: 3/N/PE/400V AC
- Frequency: 50 Hz
- Connected load: 8 kW
- Fuse protection: 32 A
- Max. laser power: 100 W
- Laser safety class (open): 4
- Laser safety class (closed): 1
Kjdpfx Aoft R Swedkslp
- Weight: 850 kg
- Type: EOSINT P 380
- Condition: used
Scope of supply: (see image)
(Technical data subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
Dražba
Dražba zaključena
Baden-Württemberg
449 km
3D-tiskalnik
MarkforgedFull Metal X Production Farm
Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 3.300 h, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi!
Dražba celotne proizvodnje aditivne tehnologije z več kovinskimi tiskalniki, sintrirno in pralno postajo ter dodatnimi kompozitnimi tiskalniki! Ponudba vključuje naslednje dele:
3x Metal X
1x Sinter II
1x LMI pralna postaja
1x Mark Two plastični tiskalnik
Kodpfx Asyc Ub Tedkolp
1x OnyxOne plastični tiskalnik
PODROBNOSTI STROJA
Obratovalne ure: 3.300 h
OPREMA
Redno vzdrževano in servisirano
Intuitivno upravljanje prek zaslonov na dotik
Programsko opremo za pripravo in dodelavo tiskanja
Obdelava različnih kovin
Celovita rešitev od konstrukcije do končnega izdelka
Enostavna integracija v obstoječa okolja
Mali oglas
Borken
868 km
3D tiskalnik
3DGENCEF420
Pokliči
Stanje: rabljeno, 3DGENCE
Model: Industry F420
Technical Data:
Build volume: 380 × 380 × 420 mm (60,648 cm³)
External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm
Printing system: Dual extruder equipped with cleaning system
+ Interchangeable nozzle head
Filament diameter: 1.75 mm
Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK
Support material: soluble support material ESM-10, HIPS
Filament chamber: 4 slots for filament with automatic changeover system
Print head temperature (max.): 500°C
Print bed temperature (max.): 180°C
Build chamber temperature (max.): 180°C (active heating)
Filament chamber temperature (max.): 50°C
Kodswnpbgspfx Adkelp
Condition: used
Scope of delivery: (see pictures)
Weight: 350 kg
(Specifications subject to change; errors and omissions excepted!)
Feel free to contact us by phone for further questions.
Written orders possible via email or fax.
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni 3D tiskalnik (150)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec

























































































































































































































