3D tiskalnik

Union Tech PILOT 250 Stereolitograph

Leto izdelave: 2019, stanje: kot nova (razstavni stroj), Ex Demo HP 3D, kaum gebraucht, inklusive Zubehör, Standort in der Nähe von London. Kwodpfx Aslgwb Sjdkjw

Stanje: zelo dobro (rabljeno), Eos EOSINT Plastic Laser Sintering System We are offering an Eos EOSINT Plastic Laser Sintering System. Model: Eos EOSINT P380 The following components are included with the EOS P380 system: - Build chamber container - Powder container - Overflow container - Cooler: Termo TEK Thermochiller, Type: 802-18644-3 - Unpacking piston - Removal trolley - 3DM 8-zone process chamber heating, 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin - Build volume: 350 mm x 350 mm x 610 mm - Voltage: 3/N/PE/400V AC - Frequency: 50 Hz - Connected load: 8 kW - Fuse protection: 32 A - Max. laser power: 100 W - Laser safety class (open): 4 - Laser safety class (closed): 1 - Weight: 850 kg - Type: EOSINT P 380 - Condition: used Scope of supply: (see image) (Technical data subject to change and errors excepted!) Kwedjft R Swjpfx Adkjw If you have further questions, we are happy to assist you by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 100 h, Gebrauchte ProJet SD6000 3D-Druckmaschine mit Stereolithografie-Technologie (SLA). Die Maschine wurde während ihrer bisherigen Lebensdauer nur äußerst wenig genutzt, da sie am AMRC Forschungszentrum der University of Sheffield („Factory of the Future“) installiert und dort lediglich sporadisch für Forschungsprojekte eingesetzt wurde. Seriennummer: 10311178101 Baujahr: 2014 MASCHINENKONSTRUKTION & AUSSTATTUNG Die ProJet 6000 HD SLA 3D bietet Stereolithographie-Qualität auf kompaktem Raum. Diese 3D-Drucker vereinen die einzigartigen Möglichkeiten der SLA-Technologie, optimiert für Kosteneffizienz und eine breite Materialverfügbarkeit, in einem platzsparenden Design. SLA-gedruckte Bauteile zeichnen sich durch herausragende Maßgenauigkeit und exzellente Oberflächenqualität aus. Hohe Flexibilität Präziser 3D-Druck feiner Details mit einer breiten Auswahl an leistungsoptimierten Werkstoffen, die die Eigenschaften herkömmlicher Kunststoffe erreichen oder übertreffen. Einfache Umrüstung durch wechselbare Materialmodule für flexible Einsatzmöglichkeiten. • Zwei Bauplattformen • Ein Material-Förderwagen • Projet TM6000 Druckwanne • Reinigungsstation • Aushärtestation Druckmodi: High Definition, Ultra High Definition Auflösung: -HD: 0,125 mm, Schichtstärke 0,125 mm -Ultra-HD: 0,125 mm, Schichtstärke 0,10 mm Nutzbares Bauvolumen: -kurz: 250 x 250 x 50 mm -mittel: 250 x 250 x 125 mm -hoch: 250 x 250 x 250 mm Genauigkeit: 0,025 – 0,05 mm pro 25,4 mm Bauteilabmessung VORTEILE: - Stereolithografie-Technologie (SLA) Kodpstvfwkofx Adkeww - Maximales Bauvolumen (B x T x H): 250 x 250 x 250 mm - Höchste Präzision und Maßhaltigkeit - Austauschbare Materialfördermodule (MDMs) - Zwei Laserspotgrößen pro Schicht – keine Kompromisse bei Geschwindigkeit oder Detailtreue - Exakte Linienführung in X- und Y-Richtung für präzise Kurvendefinition - Branchenführende 3D Sprint-Software für Dateiaufbereitung und Produktionsablauf - Cloud-Anbindung für vorausschauende und schnelle Wartung mit 3D Connect

Stanje: zelo dobro (rabljeno), 3D Systems We are offering you a 3D printer here. Solid-State Nd:YVO4 with third harmonic generation Wavelength: 354.7nm Nominal laser head output: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ Coating System: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Production layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ Scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Wide line detection, nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Wide line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Kedonkalgopfx Adkoww Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Model: iPro 8000 Condition: used Scope of delivery: (Please see pictures) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to assist you by phone.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 200 h, The system is located at the BIBUS Austria Demo Center and can be inspected and tested at any time. In total, the device can process 14 materials – in addition to common plastics such as ABS, PLA, TPU, and Carbon PA, it also supports high-performance polymers such as Ultem, Peek, CarbonPeek, and Helios-Peek. The Hyperspeed upgrade can be performed at any time and increases the system’s productivity in dual mode by 65%. The cost for this is €35,000, including hardware, software, and service. Four material dryers are included in the scope of delivery. Payment terms: advance payment, exclusive of transport and commissioning – these costs are location-dependent and will be invoiced based on the delivery address. Kodpoibikwefx Adksww

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: zelo dobro (rabljeno), Eos EOSINT Ponujamo Eos EOSINT plastični laserski sinter sistem. Pri sistemu EOS P380 so priloženi naslednji elementi: Kontejner za gradbeni prostor Kontejner za prah Prelivni kontejner 3DM 8-consko ogrevanje procesne komore 250°C Vsaka cona je nastavljiva posebej, homogeno temperaturno polje ± 1°C Kelvin 350 mm x 350 mm x 610 mm Napetost 3/N/PE/ 400V AC Frekvenca 50 Hz Priključna moč 8 kW Varovalka 32 A Maks. moč laserja 100 W Razred laserja odprto 4 Razred laserja zaprto 1 Teža 850 kg EOSINT P 380 Stanje: rabljeno Obseg dobave: (glejte sliko) Kwjdegqux Nspfx Adkow (Spremembe in napake v tehničnih podatkih so pridržane!) Za dodatna vprašanja smo vam na voljo po telefonu.

Stanje: zelo dobro (rabljeno), Arburg Model: Arburg Freeformer 300-3X Additive manufacturing of complex functional components With high-temperature option The new, large freeformer 300-3X processes three components using the ARBURG Plastic Freeforming (AKF) process, enabling—for the first time worldwide—the industrial additive manufacturing of complex functional parts with robust hard-soft material bonding and support structure. The designation 300 refers to the available build platform in square centimeters. Compared to the freeformer 200-3X, the build chamber now provides 50 percent more space for parts with dimensions up to 234 x 134 x 230 millimeters. “3X” stands for the three axes (x, y, and z) on which the build platform can move. About additive manufacturing: Manufacturer: Arburg Build volume [cm³]: 7,211 Build area X [mm]: 234 Build area Y [mm]: 134 Kedpfxoizaiks Adkeww Build area Z [mm]: 230 Print materials: ABS, PC, PLA Category: Industrial Operating voltage: 400 / 400 V 3~50 Hz Control voltage: 24V DC Total rated current: 11 A Total connection load: 7.8 kW Year of manufacture: 2019 Operating hours: 1,483 Weight: 1,593 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. All information is without guarantee!) For further questions please do not hesitate to contact us by phone.

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 27309654, x-travel: 1600 mm y-travel: 1000 mm z-travel: 1300 mm Base plate size: 1,500 x 800 x 120 mm Working range Y-axis: 175–1210 mm Working range Z-axis: 0–810 mm Digital readout: Grundig 3-axis DigiMeß Digital readout dimensions: 235 x 80 x 130 mm Kodpfx Aecxxwrsdkeww Total power requirement: 0.04 kW Machine weight approx.: 2 t Space requirement approx.: 2.0 x 1.5 x 1.63 m - 3D coordinate measuring machine - Cast iron plates, precision scraped, with 4 leveling feet 2000 x 1500 mm - Includes approx. 20 different scribing and measuring probes - Equipped with Stiefelmayer guiding system "A"

Stanje: zelo dobro (rabljeno), 3D Systems Model: DT60 Build volume: 600 x 450 x 450 mm External dimensions: 1265 x 780 x 1725 mm Z-axis precision: 1.25 micron X and Y-axis precision: 7.5 micron Max. extruder temperature: 500 ºC Max. build chamber temperature: 120 ºC Nozzle diameter: 0.6 mm Additional available nozzle diameters: 0.2 / 0.4 / 0.8 / 1 / 1.2 mm Kwjdpfennzyqox Adkow Thermal barrier made from titanium Two independent extruders Heated filament supply 4 Print Modes: SINGLE, DUAL, TWIN, REFLEX 220 - 240 V, 50-60 Hz Maximum power consumption: 3 kW/h 7” LCD touchscreen Remote monitoring capability Industry 4.0 ready: WiFi, Ethernet, HotSpot, USB MMS System - Modular Maintenance System Dual filament loading Automatic filament changeover Heated feeder Jam detection Filament end detection sensor Print recovery system Liquid cooling Double hardened glass Base fixed by vacuum High print speed Encoder-controlled positioning Condition: used Scope of delivery: (see pictures) (Sale ex location!) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.