3D-tiskalnik

Stratasys Objet 260 Connex

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 270047, Leto izdelave: 2015, obratovalne ure: 1.514 h, The Stratasys Objet260 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. With its advanced technology, it enables the precise production of complex and highly detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, which offers even greater freedom in designing and implementing your projects. The technology of the Stratasys Objet260 Connex 3 is based on the PolyJet process, delivering highly accurate results with exceptional surface quality. Models can be printed with a layer thickness of 30 µm or 16 µm, allowing you to choose between maximum resolution or maximum speed. In both modes, the PolyJet technology enables you to print delicate models with fine details. Featuring a build volume of 255 x 252 x 200 mm, the Objet260 Connex 3 allows the creation of a wide variety of complex and detailed models in a single printing session, saving you both time and effort. The operation of the Stratasys Objet260 Connex 3 is straightforward and user-friendly. Using the free GrabCAD software, you can conveniently prepare your models and monitor the printing process. As model materials, rigid photopolymers in white, black, gray, blue, and transparent are available in 3.6kg cartridges. The machine can also print flexible and dental model materials. Six material bays are installed, with the device automatically switching from an empty to a full cartridge, making extended unattended printing possible. With the digital printing mode of the Connex series, you can also produce complex multi-component and multi-material models. You have the flexibility to combine different materials, colors, and Shore hardnesses in a single model. On the Objet260 Connex 3, it is possible to blend up to three different modeling materials. The printer uses the gel-like support material SUP705. To optimally remove this, we recommend using a WaterJet cleaning station, which we are happy to offer together with the printer. The Stratasys Objet260 Connex 3 can be installed anywhere and does not require any special setup conditions. For precise details, please refer to the included site preparation guide. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used units that have been refurbished and serviced by our experts and then verified via a 24-hour test print. In the case of the Objet24, however, we also have some brand new machines in stock. We offer optimal support before, during, and after your purchase. In addition to our services such as on-site installation and training for your team, we also offer the delivery of accessories, spare parts, and materials. Enter into a maintenance contract with us and benefit from full planning and cost security, rapid response times, and minimized machine downtime. This means you incur no risk with your purchase. If you are still unsure which 3D printing system is right for you, we are happy to advise you and answer any outstanding questions about 3D printing. Request your personalized quote today. Csdpforrh S Tjx Afnsgp

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 24.210 h, This injection moulding machine from Dr. Boy is located at Plastima Used Machinery in the machine storage facility. The machine is from 2007 and has relatively low operating hours for its age. – Brand: Dr. Boy – Model: 55M – Year of manufacture: 2007 – Screw diameter: 32 mm – Shot volume: 96.5 cm³ – Clamping force: 55T – Operating hours: 24,210 Cgsdpfjtpf N Uox Afnsp

Stanje: zelo dobro (rabljeno), Stratasys Objet Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox PC, Monitor, Software: Objet Studio Ver. 9.2.11.6825 The Stratasys Objet260 Connex 3D printers are based on PolyJet technology and enable two or three base resins to be combined in a single print run, allowing prototypes to be produced from up to three materials, as well as simulating over-moulding or arranging build trays with selected models. Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously within a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model Materials: - Rigid, opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) - Rubber-like (Tango family) - Transparent (RGD720 and VeroClear) - Simulated polypropylene (Endur and Durus) - Biocompatible (MED610) - Heat resistant (RGD525) Digital Materials: - Digital ABS and Digital ABS2 - Wide range of translucency values - Rubber blends with a range of Shore A hardness grades - Simulated polypropylene materials with improved heat resistance Applications: - Visual prototypes - Functional prototypes - Jigs and fixtures - Architectural models - Medical models - Injection moulding tools - Concept models Technical Specifications: Cgsdpfxov Rw Ete Afnjp Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers down to 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the full model size (only for rigid materials, depending on geometry, construction parameters, and model orientation) Dimensions and Weight: 870 × 735 × 1200 mm; 410 kg Power supply: 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D312363, Leto izdelave: 2019, skupna dolžina: 610 mm, skupna višina: 1.400 mm, skupna širina: 660 mm, vrsta vhodnega toka: Enosmerni tok, skupna masa: 150 kg, vhodna napetost: 230 V, vhodna frekvenca: 60 Hz, natančnost pozicioniranja: 0,01 mm, dolžina podajanja os X: 150 mm, dolžina pomika po osi Y: 150 mm, dolžina podajanja os Z: 200 mm, Oprema: CE označba, nujno zaustavitev, 3D-tiskalnik s tekočo smolo SLA. Visoka natančnost, velika proizvodna kapaciteta. Popolnoma združljiv z večino CAD/CAM sistemov. Izjemno visoka natančnost in kakovost površine. Tiskanje z več kot 50 različnimi materiali za vse panoge: industrija in oblikovanje, nakit in moda, zobozdravstvo in biomedicina, prosumer. Cgodjxrg R Djpfx Afnjp

Stanje: dober (rabljeno), Objet Stratasys Model: Objet350 Connex 3 + SUT70 USFL SOLO + WATER JET Technical Specifications: Build volume: 342 × 342 × 200 mm Layer thickness: 0.016 / 0.030 mm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and weight: 1400 × 1260 × 1100 mm; 430 kg Cleaning station SUT70 approx. 580 x 605 x 800 mm, 70 kg Materials: Rigid and opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Cedpfjx A S Atjx Afnsgp Rubber-like: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Polypropylene-similar: Rigur™ and Durus™ Temperature-resistant & biocompatible SHR printhead system PolyLog material management system Incl. digital colour options (more than 500,000) GrabCAD Print software Incl. OBJET 350 Connex3 support package Condition: used Last inspection: 2024! Scope of delivery: (see image) (Specifications and technical data may be subject to changes and errors!) We are happy to answer further questions by phone.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 52181, Leto izdelave: 2013, obratovalne ure: 40.000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Regular maintenance has been performed by Stratasys. Cgodpfxjwna R Sj Afnjp The machines are in excellent condition and fully functional. All print heads are installed in the printer. Machines are ready for collection.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3009F484403, Leto izdelave: 2022, obratovalne ure: 217 h, Ponujamo ta 3D tiskalnik 3D Systems ProJet2500, letnik 05/2022, za prodajo. Tiskalnik ima le 217 ur tiskanja (8 kg materiala), skoraj kot nov. Cgjdeyfv Dbepfx Afnjp Za vprašanja ali dodatne informacije nam lahko pošljete sporočilo ali nas pokličete.