Stojalo Tiska nakup rabljenega (4.674)

Leto izdelave: 1967, stanje: dober (rabljeno), Bandwidth: 300 - 1,250 mm Strip thickness: 0.5 - 3 mm Hodpfxjd Ha Irj Ab Esfd Blade shaft diameter: 180 mm

Leto izdelave: 1967, stanje: dober (rabljeno), Bandwidth: 300 - 1,250 mm Strip thickness: 0.5 - 3 mm Hfjdsgruhcepfx Ab Eed Blade shaft diameter: 180 mm

Leto izdelave: 1972, stanje: dober (rabljeno), Bandwidth: max. 830 mm Band thickness: 0.3 - 4 mm Hfodegrykhspfx Ab Esd Knife shaft diameter: 140 mm Number of cuts/material thickness: 25 / 0.5 mm 4 / 4 mm

Stanje: kot nova (razstavni stroj), - Press force: 700 kN - Press size: 2500 x 1250 mm - Medium heated (water), incl. heating unit up to a temperature of 85°C. - Incl. Joos A.B.S. system for protection of the heating plates in case of incorrect loading Hodpfxowazno Ab Eefd Price on request!

Stanje: kot nova (razstavni stroj), Technical Data: Maximum pressing force: 800 kN Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) Hfsdpfxefhqhdj Ab Eed 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C.

Stanje: rabljeno, Elastomer Test Stand BIA Turnkey Test Systems Hexapod Item No.: PT-065 Designation: Elastomer Test Stand Manufacturer: BIA Turnkey Test Systems Description: Test stand for determining and analyzing mount characteristic curves and values at vehicle operating points mount characteristic curves and values at operating points under specified temperature conditions mount behavior under operational stress (compression set, characteristic curve change) operational noise at operating points on elastomer mounts in the suspension/drivetrain area Test specimens are clamped between a fixed upper plate and a movable lower plate. The movable plate is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates to accommodate a wide range of test specimens and fixtures. Degrees of Freedom Amplitude Speeds Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340°/s 50 Hz 3.75 kNm Mys ±10° 360°/s 50 Hz 3.75 kNm Mzs ±25° 580°/s 50 Hz 3 kNm Hydraulic Hexapod: The hydraulic hexapod consists of 6 hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder is equipped with two parallel servo valves (38 l/min). The six cylinders drive the movable plate via six connecting rods. The connecting rods are equipped with a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing is supplied directly from the cylinder. Linear Actuator: The distance between the upper and lower plate can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw nut system. The linear actuator is equipped with an absolute encoder, Hfsdpfewhdnhox Ab Esd which is mounted on the input shaft of the gearbox. Hydraulic Actuator: The hydraulic cylinders are fitted with magnetostrictive displacement sensors. Resolution: 0.0015% Linearity:

Stanje: dober (rabljeno), Leto izdelave: 2011, Pushback Racking, Galler Pallet Racking System, LIFO In the LIFO (Last In, First Out) process, the most recently stored products are the first to be retrieved. Technical specifications: Manufacturer: Galler Type: Pushback Racking Condition: Used, good Floor area: 282 sqm Height: 3.10 m Length: 47 linear meters Hfjdpfxohql Hzj Ab Eod Rack depth: 6.00 m Bracing: Bolted Safety: Side and rear mesh panels Channel load: 4,250 kg Maximum pallet load: 850 kg Year of manufacture: 2011 Pallet positions: 600 The racking is dismantled and ready for loading in Neuwied. All prices plus VAT.

Stanje: rabljeno, številka stroja/vozila: 1231566, Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm electrical connection: 380 V, 1.5 kW Required space: 700 x 400 x 1150 mm Hodobuaa Eepfx Ab Esfd

Stanje: pripravljen za uporabo (rabljen), 4 uprights, Height: 4.50 m Width: 1.00 m 8 support beams: 3.90 m 2 support beams: 2.80 m 4 support beams: 2.00 m Hodpomgb Adjfx Ab Esfd

Stanje: dober (rabljeno), Grinding wheel diameter: 300 mm Hedpfjv D E Szsx Ab Ejfd Grinding wheel width: 50 mm Grinding wheel speed: 1400 rpm Grinding wheel drive: 380 V, 1.5 kW Space requirement: 1050 x 580 x 1200 mm Weight approx.: 140 kg

Stanje: zelo dobro (rabljeno), Adjustable-height tripod Clamping thread: 1/2" Hfedpfod Ey Abex Ab Esd Weight: 5 kg incl. carrying strap

Leto izdelave: 1979, stanje: rabljeno, številka stroja/vozila: 3534, Pressing force: 630 kN Return force: 100 kN Maximum ram stroke: 200 mm Installation height: 400 mm Throat depth approx.: 350 mm Table size: 610 x 800 mm Passage hole in table: 100 mm Hjdpob Hk Dzefx Ab Eefd Ram bore: 40 mm Ram advance speed: 350 mm/s Ram pressing speed: 18 mm/s Ram return speed: 380 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 1800 x 920 x 2440 mm Weight: 3.94 t

Leto izdelave: 1991, stanje: rabljeno, številka stroja/vozila: K2940, Pressing force: 150 t Working width: 4300 mm Clear distance between uprights: 3600 mm Throat depth: 300 mm Max. installation height: approx. 500/700 mm Hedpfe Dnf Uex Ab Eefd Working speed: up/down 41–65/10 mm/sec Backgauge: 1000 mm Electrical connection: 400 V, approx. 15 kVA kW Weight: 14 t Space requirements: 4600 x 1950 x 3100 mm

Leto izdelave: 1990, stanje: rabljeno, Pressing force: 250 t Working width: 3550 mm Clear distance between uprights: 3050 mm Hfodpfx Aj Dqaqob Eod Throat depth: 300 mm Backgauge: yes, mm Electrical connection: 400 V, approx. 26 kW Weight: 20 t Required space: 2100 x 3800 x 3100 mm

Stanje: rabljeno, Dvojni namizni brusilnik GREIF Tip D 17 Tov. št.: 05105 Premer brusnega koluta: 175 mm Širina brusnega koluta: 25 mm Moč motorja: 0,35 kW Hitrost vrtenja koluta: 2800 obr/min Električni priključek: 380 V, 50 Hz - Brusilna os na novo ležajena - Originalno stojalo Hfodpfoxciu Tox Ab Eed Potrebni prostor (D x Š x V): 500 x 450 x 1120 mm Teža: cca 100 kg V dobrem stanju

Stanje: rabljeno, Dvojni brusilni stroj STEPHAN-WERKE HAMELN tip SLD 121 Tovarniška št. 1176445 Premer brusnega koluta: 175/145 mm Širina brusnega koluta: 20 mm Moč motorja: 0,37 kW Hitrost vrtenja brusnega koluta: 2800 obr/min Priključek: 380 V, 50 Hz - Originalno stojalo Hfedpfx Asxciu Hjb Eod - Stranski pomični voziček z ležaji in lastovičjim repom - Univerzalni nosilec za pomični voziček Potrebna površina D x Š x V: 470 x 430 x 1160 mm Teža: ca. 80 kg V dobrem stanju

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Side frame passage: 600 mm Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Strokes per minute: 40–180 Power requirement: 18.5 kW Hsdpscna Hfefx Ab Eefd Weight: 20 tons Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Stanje: dober (rabljeno), Premer brusnega koluta: maks. 300 mm Število vrtljajev: 1.500 min⁻¹ Pogonska moč: 1,5 kW Dimenzije stroja (D x Š x V): 750 x 420 x 1100 mm Teža: pribl. 130 kg Siegfried Volz Orodjarni stroji Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Hfedjw Emahepfx Ab Esd

Leto izdelave: 1995, stanje: dober (rabljeno), številka stroja/vozila: 044092, Offer 22148 Hfodpfsiba R Nex Ab Esd Technical Specifications: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Bracket for wall mounting

Leto izdelave: 2005, stanje: dober (rabljeno), številka stroja/vozila: 50 330 008, Offer 21055 Technical Data: Hfodpfji Dav Dex Ab Eod - Polishing wheel diameter: approx. 300 mm - Wheel width: approx. 40 mm - Wheel bore: approx. 76 mm - Wheel speed: 1500 rpm - Drive: 400 V / 2.2 kW - Working height: approx. 1150 mm - Machine stand - Space requirement: approx. W 500 x H 1300 x D 250 mm - Weight: approx. 50 kg

Stanje: dober (rabljeno), Leto izdelave: 1983, številka stroja/vozila: 7346, Offer 24016 Technical Data: - Drilling capacity: 22 mm - Drill spindle taper: MT 2 - Drill spindle stroke: 100 mm - 4 spindle speeds: 355 – 710 – 1400 – 2800 rpm - Throat depth: 210 mm - Machine table: 480 x 420 mm - Min./max. distance spindle/table: approx. 190 / 340 mm Hfodpfsrwmbgjx Ab Esd - Drive: 400 V / 1.1 kW - Required space: approx. W 450 x H 1200 x D 700 mm - Weight: approx. 170 kg

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: 12355, Offer 25080 Shifting Sheet Rack with 10 Moveable Material Stands Technical Data: Hedpfx Abev Ra Ids Eofd - Stand – Compartment Dimensions / Support Surface: W 3000 x H 1800 mm - Compartment Depth / Installation Footprint: 180 mm - Max. Load Capacity per Compartment: 2000 kg - Slide-in Holder Brackets - Guide Rail: L 4750 mm - Total Space Requirement approx.: L 4750 x H 2200 x D 4000 mm - Weight approx.: 3000 kg

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: xxxx, Ref. No. 24265 Technical data: Hodotx Ubrjpfx Ab Eefd - Shaft mount diameter: 35 mm - Usable shaft length: 90 mm - Drive speed: 1450 rpm - Drive: 400 V / 4.4 kW - Space requirement approx.: W 1300 x H 2500 x D 800 mm - Weight approx.: 200 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 334, Offer 19194 Technical Specifications: - Drilling capacity: 22 mm - Spindle taper: MT 2 - Spindle stroke: 100 mm - 4 spindle speeds: 355 / 710 / 1400 / 2800 rpm Hodpfx Asrwl Nnob Eefd - Clockwise and counterclockwise rotation - Throat depth: 210 mm - Machine table: 480 x 420 mm - Distance from machined base plate to spindle: 190 / 340 mm - Drive: 400 V / 0.8 / 1.0 kW - Space requirement (W x H x D): 450 x 1200 x 700 mm - Weight approx.: 170 kg

Leto izdelave: 1985, stanje: dober (rabljeno), številka stroja/vozila: 013125, Offer 21283 Technical Specifications: - Grinding wheel diameter: approx. 500 mm - Grinding wheel width: approx. 50 mm - Grinding wheel bore: approx. 127 mm - Wheel speed: 950 rpm - Drive: 400 V / 3.3 kW - Working height: approx. 800 mm - Working depth / safety depth adjustable - Connections for extraction pipe: 100 mm - Space requirement: approx. W 1250 x H 1150 x D 650 mm - Weight: approx. 350 kg Hfedpfx Aboi Daw Te Eod