Ekscentrične stiskalnice - Enokolonske

HESSE by FRESAN FP 20 P

Stanje: pripravljen za uporabo (rabljen), Pressing force: 1,600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Lsdpfxehz Ua So Al Njhf

Stanje: novo, Leto izdelave: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 1200 kg Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard equipment Working range for tube diameter Lodpfxsxgc Ars Al Nohf Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9100 mm Z-axis travel: 4000 mm X-axis travel: 400 mm Maximum loading length: 9200 mm Maximum unloading length: 6000 mm X,Y axis positioning accuracy: +/-0.05 mm/1000 mm X,Y axis repeat positioning accuracy: +/-0.05 mm/1000 mm Maximum rotational U-axis positioning speed: 100 RPM Maximum acceleration X/Y axis: 1.0 G X-axis rapid traverse speed: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃–40℃

Stanje: novo, Leto izdelave: 2024, Pressure: 20 t Throat depth: 155 mm Stroke: 6–60 mm Strokes per minute: 84–210 spm Slide adjustment: 50 mm Installation height, with slide at top: 300 mm Table surface: 300 x 450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Slide area: 190 x 278 mm Slide bore: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Required space (WxDxH): 1100 x 1100 x 1900 mm Machine number: 16146 LED machine light Stroke rate frequency-controlled Sick light curtain for safety and automatic operation 4x freely programmable electronic cams 4x freely programmable tool safeguard systems Ledpsvfhp Sefx Al Nohf Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual feeding operations

Stanje: rabljeno, Leto izdelave: 2025, Universal ram press made of high-quality cast iron. Products from this series offer extensive capabilities in a single reliable and cost-effective device. Easy to operate for tasks such as bushing installation, bending, straightening, and reaming. Machine features - Suitable for mounting and dismounting bearings, bushings, and pins - High-quality cast iron construction - Table adjustable in four positions - Suitable for use in any workshop Technical specifications - Pressing force: 3 t - Maximum workpiece height: 285 mm - Distance from ram axis to column surface: 165 mm - Table diameter: 163 mm - Ram dimensions: 38×38 mm - Largest hole in table: 44 mm - Height with ram lowered: 615 mm - Base dimensions: 455×300 mm - Weight: 65 kg Lhodpfx Alsw Hxmce Nef NOTE: 100% COMPLETE, SHOWS SIGNS OF CORROSION

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, številka stroja/vozila: 5058870, Pressing force: 25 t Throat depth: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Ledsm Uxzuepfx Al Njhf Strokes per minute: 150 /min Drive motor: 380 V, 1.1 kW Space requirements: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), A Sahinler workshop press is available. Pressing force: 150 t, max. pressure: 244 bar, working width: 1,520 mm, piston stroke: 300 mm, ram dimensions X/Y: 200 mm/1,520 mm, through-hole: 100 mm, table dimensions X/Y: 600 mm/1,520 mm, max. installation height: 610 mm. Approach speed: 9 mm/s, return speed: 10 mm/s, working speed: 5 mm/s, drive power: 11 kW. Machine dimensions X/Y/Z: approx. 2,500 mm/1,000 mm/2,400 mm, weight: approx. 3,000 kg. Documentation is available. On-site inspection is possible. Lodpfx Aev N I Agsl Nohf

Stanje: dober (rabljeno), Leto izdelave: 1974, Hand-operated spindle press, arbor press, spindle press, manual spindle press, hydraulic press, toggle press - Manufacturer: Kalisz, manual spindle press type YB-1 with solid base frame - Max. Pressure: 10,000 kg - Stroke: 200 mm - Clearance: 320 mm - Spindle mounting: Ø 20 mm Lodpfsigwdwox Al Njhf - Table size: 290 x 250 mm, T-slot width 14 mm - Dimensions (L/W/H): 1160 x 860 x 1750 mm - Total weight: 350 kg

Stanje: dober (rabljeno), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Ram size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (largest stroke at top) Stroke: 5...29 mm Lhodpfx Alevnrhwj Nsf Ram adjustment: 25 mm Other features: • Rotary wedge clutch • Foot release • Control and safety guard as new, very little used • Without table

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, številka stroja/vozila: AA1/016854, Funkcionalnost: popolnoma funkcionalen, 3-AXIS DRILLING & MILLING CENTER Brand: SCM Model: TECH Z2 Ref. R0410.01 Serial number: AA1/016854 Year: 2012 (Photos taken prior to overhaul, functional testing & cleaning) MACHINING CAPACITIES: - Maximum workpiece height (thickness): 160 mm - Maximum workpiece length: 2700 mm In twin station mode: 1210 mm - Maximum workpiece width: 1300 mm Motions: - X axis travel: 3060 mm, Y axis: 1735 mm, Z axis: 250 mm - Maximum traverse speeds (vectorial): 60 m/min MACHINE CONFIGURATION: - 6 beams with pneumatic clamping for vacuum pods, e.g. 120x120 or 55x120 mm - Automatic lubrication unit - Spindle aggregates as follows: (X-axis movement by rack and pinion, Y-axis by ball screw; high precision linear guides with automatic lubrication) • Milling/Routing unit, 11 kW (15 HP): - Spindle speed 1500 - 24000 rpm, variable speed, clockwise/counter-clockwise - Tool holder interface: HSK63F, ER32 collet - Onboard magazine for 8 tools - Perimeter dust extraction hood • 18-spindle drilling unit: - 12 independent vertical spindles (8 in X direction, 5 in Y direction) Ljdpfov Tzrvsx Al Njhf - 6 horizontal spindles (4 in X, 2 in Y) - Center distance between spindles 32 mm for M10/Ø11 mm drill bits - Rotation speed 4000 rpm - Pneumatic vertical stroke 60 mm - Perimeter dust extraction hood • Integrated grooving saw-milling group: - Blade Ø120 mm, thickness 6 mm - Speed 6000 rpm - Pneumatic vertical stroke 60 mm • Mobile operator panel on support arm with control PC: – Operating System: Windows XP – 17" LCD screen – Ethernet connection – Machine interface software: Xilog and Maestro OTHER FEATURES: - Main electrical supply: 400V, 3-phase+N+PE, 50Hz, IN37A - Electrospindle motor: 12 kW - Drilling/grooving motor: 2.2 kW - 1 vacuum pump 2.4 kW: 90-108 m3/h - Pneumatic supply >=7 bar - Extraction: Extraction ports: 2x Ø150 mm (1 port Ø200 mm using installed splitter) Recommended extraction: 30 m/s – 3400 m3/h - CE compliant machine with safety area and light curtain safety barrier Operating dimensions with safety area: see documentation extracts Transport dimensions: to be specified during equipment preparation Estimated total weight: 2200 kg Machine supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine overhauled, brought up to compliance, with quality control and dynamic functional testing. Supplied with 3-month warranty & statement of CE compliance. Available from stock (subject to prior sale). Price ex works. Delivery and additional services on request.

Leto izdelave: 2021, stanje: rabljeno, Technical details: Pressing force: 5 t Stand width: - mm Lhodpfx Asyzzh Eol Njf Installation height: 60 mm Rated power: 8 kVA Table height adjustment: 60 mm Compressed air: 6 bar Connection voltage: 400 V Electrical specifications - voltage/frequency: 400/50 V/Hz Total connected load: 4 kW Machine weight approx.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! DESCRIPTION OF THE MACHINE 2 machines available MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. The horizontal arm features a movable press table, which can be manually shifted along linear guides. In the front position, the table can be locked manually using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. Only in this position can the press head be lowered using the two-hand safety controls. The control panel features two-hand operation switches, emergency stop switch, table lowering button, and power selectors 1,2. The force can be set via potentiometers in the control cabinet. Two force levels and corresponding pressing speeds can be selected there. The press head moves along the vertical arm of the press. It also travels on linear guides. The head drive is via a lead screw, which is actuated by a geared electric motor via pulleys and timing belt. The entire machine is mounted on a table made of aluminum profiles.