Ekscentrična stiskalnica z enim stolpcem

Kieserling & Albrecht Pedru 100

Stanje: pripravljen za uporabo (rabljen), Pressing force: 1,600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Iedpfxehz Ua So Abljaw

Stanje: novo, Leto izdelave: 2025, Laser power: 6000 watts Round tube: 20 - 350 mm Square tube: 20 x 20 - 350 x 350 mm Rectangular tube: 20 x 20 - 350 x 350 mm Max. positioning accuracy X, Y axis: 0.05/1000 mm Max. positioning accuracy U axis: 0.05/1000 mm Max. mild steel: 14 mm Max. stainless steel: 10 mm Max. aluminium: 10 mm Max. tube weight: 1200 kg Iaedpoxgc Arefx Abljw Length: 17,296 mm Width: 4,271 mm Height: 2,933 mm Standard equipment Working range for tube diameter Round tube: 20 mm - 350 mm Square tube: 20 - 350 mm Rectangular tube: 20 x 20 mm - 350 x 350 mm Minimum clamping tube thickness: ≥1 mm Y-axis travel: 9100 mm Z-axis travel: 4000 mm X-axis travel: 400 mm Maximum loading length: 9200 mm Maximum unloading length: 6000 mm X,Y axis positioning accuracy: +/-0.05 mm/1000 mm X,Y axis repeat positioning accuracy: +/-0.05 mm/1000 mm Maximum rotational U-axis positioning speed: 100 RPM Maximum acceleration X/Y axis: 1.0 G X-axis rapid traverse speed: ≤50 m/min Maximum loading capacity per tube: ≤133 kg/m Machine operating temperature: 20℃–40℃

Stanje: zelo dobro (rabljeno), Pressure: 50 t Iaodjtrhf Aopfx Ablew Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, številka stroja/vozila: DF0150, stiskalna sila: 63 t, Single-column press – Manufacturer Calende – 63 t C-frame press – Table 750 × 600 mm For sale is a robust hydraulic single-column press (C-frame press) from Calende with a pressing force of 63 t. This machine provides high operating speeds, a modern Siemens control system, as well as compact design, making it ideal for assembly, straightening, and pressing applications in industrial use. ==== Technical Data + Information: Single-column press Calende – 63 t C-frame ==== General Information - Manufacturer: Calende - Model: Single-column press - Design: C-frame press / single-column press - Press force: 63 t - Machine weight: approx. 5.1 t - Dimensions (L × W × H): approx. 1,500 × 1,600 × 2,995 mm Iaedpfxsfhcc Uj Ablow ==== Working Area - Throat width: 700 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: 850 mm ==== Table & Ram - Table plate: 750 × 600 mm - Ram plate: 600 × 540 mm ==== Speeds - Approach speed: max. 140 mm/s - Pressing speed: 15 mm/s ==== Hydraulics - Motor power: 11 kW - Return force: 6 t - Oil tank volume: 150 l ==== Electrical & Control - Control voltage: 24 V - Frequency: 50 Hz - Control system: Siemens S7-1200 - Monitor: Siemens, 12" ===== Assembly work, pressing operations, straightening tasks, series production, workshop applications, maintenance Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, tool adjustment press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines, as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these standards. Our core competency is special-purpose machinery and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Stanje: novo, Leto izdelave: 2024, Pressure: 20 t Throat depth: 155 mm Stroke: 6–60 mm Strokes per minute: 84–210 spm Slide adjustment: 50 mm Installation height, with slide at top: 300 mm Table surface: 300 x 450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Slide area: 190 x 278 mm Slide bore: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Required space (WxDxH): 1100 x 1100 x 1900 mm Machine number: 16146 LED machine light Stroke rate frequency-controlled Sick light curtain for safety and automatic operation Iajdpfx Aevfhp Soblow 4x freely programmable electronic cams 4x freely programmable tool safeguard systems Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual feeding operations

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, številka stroja/vozila: 5058870, Pressing force: 25 t Throat depth: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Iasdpfx Absm Uxzujlsw Strokes per minute: 150 /min Drive motor: 380 V, 1.1 kW Space requirements: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Stanje: dober (rabljeno), Leto izdelave: 1974, Hand-operated spindle press, arbor press, spindle press, manual spindle press, hydraulic press, toggle press - Manufacturer: Kalisz, manual spindle press type YB-1 with solid base frame - Max. Pressure: 10,000 kg - Stroke: 200 mm - Clearance: 320 mm - Spindle mounting: Ø 20 mm - Table size: 290 x 250 mm, T-slot width 14 mm Iajdpfxeigwdwo Ablew - Dimensions (L/W/H): 1160 x 860 x 1750 mm - Total weight: 350 kg

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), A Sahinler workshop press is available. Pressing force: 150 t, max. pressure: 244 bar, working width: 1,520 mm, piston stroke: 300 mm, ram dimensions X/Y: 200 mm/1,520 mm, through-hole: 100 mm, table dimensions X/Y: 600 mm/1,520 mm, max. installation height: 610 mm. Approach speed: 9 mm/s, return speed: 10 mm/s, working speed: 5 mm/s, drive power: 11 kW. Machine dimensions X/Y/Z: approx. 2,500 mm/1,000 mm/2,400 mm, weight: approx. 3,000 kg. Documentation is available. On-site inspection is possible. Isdpfxev N I Ago Ableaw

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, številka stroja/vozila: A5137, Funkcionalnost: popolnoma funkcionalen, Completely overhauled 100-ton HEILBRONN C-frame press, currently undergoing retrofit – available at short notice. Features include hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new hoses for lubrication and hydraulics, new control system (customization still possible), etc. Dimensions – see machine drawing (PDF). Technical Data: Iasdpfewb A Dzsx Ablew Press force: 1,000 kN Speed: 50 strokes/min (variable speed optional) Adjustable stroke: 14 – 150 mm Ram adjustment: 80 mm Shut height: 420 mm (max. stroke down, adjustment up) Bed: 650 x 500 mm Ram: 400 x 250 mm Throat depth: 350 mm Drive power: 5.5 kW Weight approx.: 5,500 kg

Stanje: dober (rabljeno), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Ram size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (largest stroke at top) Stroke: 5...29 mm Ram adjustment: 25 mm Other features: • Rotary wedge clutch Iedpfxevnrhwe Ableaw • Foot release • Control and safety guard as new, very little used • Without table