Junker nakup rabljenega (36)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Valjčna brusilka v dobrem stanju naprodaj zaradi neuporabe! Možno preizkusiti na lokaciji! Ijdjx Syk Tjpfx Adketd

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), skupna masa: 5.000 kg, skupna višina: 2.050 mm, This JUNKER EJ29 CNC was manufactured in 2002. It features a FANUC 21i-TB CNC control unit, servo drives for spindle and table axes, and a hydraulic/manual tailstock. The machine can process workpieces with a diameter of up to 280 mm and a length of 800 mm, with a grinding wheel diameter of 400 mm. Take the opportunity to purchase this JUNKER EJ29 CNC cylindrical grinding machine. Contact us for further information. • Distance between centres / Max. machining length: approx. 800 mm • Centre height: approx. 180 mm • Max. workpiece diameter: up to approx. 280 mm Itjdpjyq E Srofx Adksd • Grinding wheel diameter: approx. 400 mm (typical for European versions) • Peripheral grinding wheel speed: approx. 45 m/s • Grinding spindle motor power: 4.5 kW • Features: servo drives (spindle and table axes), auxiliary spindle support, hydraulic/manual tailstock Additional equipment • 4 wheel hubs • 1 hydraulic CM5 clamping spindle • 3-micron cartridge filtration system Dimensions Machine depth: 3,340 mm

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, (Please state your offer price) Sales only within Europe, including Turkey Iodpfx Ajxrtarodkstd Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Leto izdelave: 2006, Technical Details: Grinding Diameter: 5–55 mm Grinding Length: 500 mm Total Power Requirement: 44 kW -- Purpose and General Information -- Fully automated external and face grinding of synchronizer rings Centre Height: 200 mm Itodpsvg Thiofx Adkod Grinding Length: 500 mm Grinding Wheel Arrangement: right, 30° inclined Grinding Wheel Dimensions: 600 x 30 x 203.2 mm Drive Power: 7 kW X/Z Axis Drive: ball screw Travel Speed: 0.01 – 10,000 mm/min Resolution: 1 µm Workpiece Spindle Runout: < 1 µm Workpiece Changing System: Fanuc robot Control System: Siemens Sinumerik 840-D Machine Weight: 7,000 kg Centre Height: 200 mm Grinding Length: 500 mm

Stanje: rabljeno, Leto izdelave: 2007, Technical details: Machine weight approx.: 24 t Required space approx.: 3900 x 3500 x 2500 mm - The machine does not have a B-axis - Two grinding spindles, each with one grinding wheel - Transport instructions can be found in the documentation (attachments) Incl. Hoffmann KSM filter system Loading list available Operational data as of 27/03/2023: Operating hours: 21,727 h / Production hours: 11,960 h Machine documentation: 1 set of circuit diagrams, electrical schematics, and operating manual Accessories: 2 spare Marposs S/500 measuring heads; prism supports Other: Hoffmann KSM filter unit Isdpfex Aq Etsx Adketd Machine condition: commensurate with age, used with emulsion

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, (Please state your offer price) Itodpjw A Axbjfx Adkjd Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Leto izdelave: 2004, Premer brusilnega kolesa 660 mm Krmiljenje Siemens 840D Minimalna širina obdelovanca 5 mm / maksimalna 180 mm Maksimalni premer obdelovanca 200 mm Teža stroja cca. 15,0 t Potreben prostor cca. D 3,1 x Š 4,0 x V 2,7 m Na voljo sta 2 stroja. Eden od strojev je primeren za grobo brušenje, drugi za fino brušenje. Stroji so bili uporabljeni za proizvodnjo ojnic. Po naši oceni je stroj v dobrem rabljenem stanju. Dodatna oprema, prikazana orodja in vpenjala so vključena le, če je to posebej navedeno v dodatnih informacijah. Ijdpfxexq R Haj Adkotd Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja so pridržane!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Erwin Junker BUAJ BN29C CNC univerzalni cilindrični brusilnik Odlična kondicija Stroj je mogoče ogledati pod napetostjo in v delovanju po dogovoru. Letnik 1998 CNC krmilje Fanuc serije 35i Teža: 2800 kg Približne mere: 3000 mm x 1850 mm x 1800 mm Specifikacija: Razdalja med konicami: 800 mm Odmik mize: 150 mm Največja teža obdelovanca med konicami: 120 kg Ijdpfx Asyvupxjdkjtd Natančnost obdelave IT4 po ISO Brusna glava Maks. premer brusnega koluta: 400 mm Maks. širina brusnega koluta: 63 mm Vpenjalni premer brusnega koluta: 127 mm Moč motorja: 5,5 kW Maks. obodna hitrost brusnega koluta: 45 m/s Pomik brusne glave: 300 mm Nastavitveni kot brusne glave: +45°/-15° Pogonska glava Stožec vretena: MK5 Brezstopenjsko regulirana hitrost vretena: 23-291 ali 56-700 vrt/min Kot nastavitve pogonske glave: 90° Konjiček Stožec: MK4 Hod pinole konjička: 30 mm Fino nastavljiv hod: +/-0,15 mm Vzdolžni pomik Pomik mize: 756 mm Delovna hitrost vzdolžnega pomika mize: 0÷7,5 m/min Zgornja miza, vrtljiva: +/-8°30'

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Na voljo sta dva stroja tega tipa, ki sta del proizvodne linije, ki je v celoti na prodaj. Isdoylmb Dspfx Adkjtd

Stanje: rabljeno, Leto izdelave: 2014, Technical details: Maximum grinding diameter: 3-220 mm Regulating wheel width: 500 mm Maximum grinding wheel width: 500 mm Approximate machine weight: 16 t Required installation space: approx. 12 x 10 x 8 m Minimum/maximum grinding wheel diameter: 420-610 mm Itodpfx Adot Uw Avjked Grinding wheel diameter x width - internal: 304.8 x 500 mm Regulating wheel diameter min./max.: 300-350 mm The machine is currently configured for plunge grinding. Centerless grinding with automation and PPM Marposs; Güdel Grinding with JUPITER means centerless cylindrical grinding, optionally also with CBN. JUNKER combines this grinding method with CBN grinding wheels, resulting in significant productivity advantages, especially for high-volume production, due to the long service life of the grinding wheels. In addition, simultaneous material removal over the entire workpiece length allows for significantly reduced machining times in both mass production and small batch sizes. JUPITER Grinding Processes There are two forms of centerless grinding: through-feed grinding and plunge grinding. Both processes can be performed with the JUPITER series. Typical applications for through-feed grinding: Bolts and bearing bodies, large rings, small rings, piston components (e.g., for compressors), shafts with constant diameter, piston rods (e.g., for shock absorbers), small pistons for hydraulics and injection, precision wires and rods, piston pins. Typical applications for plunge grinding: Rotor shafts, gearbox components, bearing surfaces of camshafts, tube sections for assembled camshafts, universal joints, needle parts for injection systems, valve stems, barrel rollers.

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), A CNC cylindrical grinding machine by Junker, overhauled in 2019, is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, swing diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions (X/Y/Z): approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control system: Siemens Sinumerik. Includes BKW chiller, Knoll VL 1000/4000 coolant system with 6500l tank, and Hyfra industrial recooler. Documentation available. On-site inspection possible. Ijdpfowtg Eyjx Adkjtd

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Višina konic: 150 mm, maks. premer brušenja: 300 mm, razdalja med konicami: 620 mm, maks. teža obdelovanca: 120 kg, razpon nihanja brusne glave: +45°/-15°, nastavitev mize: +/-8,5°, hodi X/Z: 160 mm/756 mm, dimenzije brusilnega koluta X/Y/Z: 400 mm/63 mm/127 mm, hitrost brusnega koluta: 45 m/s, hitrost vretena obdelovanca: 700 obr/min. Dimenzije stroja X/Y/Z: pribl. 3000 mm/1850 mm/1850 mm, teža: pribl. 3000 kg. Vključno z odsesovalno napravo LTA in uravnoteževalno napravo za kolute SBS. Pogon obdelovanca je razstavljen in njegova popolnost ni znana. Dokumentacija je na voljo. Ogled na lokaciji je možen. Isdpoxvdd Asfx Adketd

Stanje: dober (rabljeno), Leto izdelave: 2005, Machine type: Cylindrical grinding machine Manufacturer: Junker Model: Jumat 5340/s Serial number: 2328 Year of manufacture: 2005 Available immediately Itedpfxskyrqis Adkjd Located at site for self-dismantling Dismantling and loading can be offered as an option

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Splošni podatki Ijdpfx Ajx D Inuedkjtd Teža stroja: 11.000 kg Ta 3-osni stroj JUNKER QUICKPOINT 5002/10 je bil izdelan leta 2002. Opremljen je s Siemens krmilnim sistemom, merilnim sistemom Marposs ter CNC-krmiljeno Z-osjo in brušilno glavo vretena. Brušilna dolžina je 1000 mm, največji premer pa do 280 mm, kar je idealno za precizno površinsko brušenje. Razmislite o možnosti nakupa te površinske brusilke JUNKER QUICKPOINT 5002/10. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Brušenje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10108, premer brusilnega koluta: 100 mm, dolžina brušenja: 100 mm, širina na sredini: 100 mm, hitrost vretena za brušenje: 18.000 obr/min, največja hitrost vretena: 250 obr/min, TECHNICAL DETAILS Grinding spindle headstock Feed: X1 axis (CNC-controlled) Traverse: Z1 axis (CNC-controlled) Grinding spindle (I) Feed: X2 axis (CNC-controlled) Traverse: Z2 axis (CNC-controlled) Grinding spindle (II) Feed: X3 axis (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: Lifetime grease lubrication Bearing seal: With sealing air Set air pressure: see section 5.3.1 Drive: 12 kW Speed control: Frequency inverter Max. speed: 18,000 rpm Balancing: Electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel width: max. 20 mm Peripheral speed: max. 125 m/s Cam workpiece Max. workpiece spinning diameter: 80 mm Ijdpfjwynhvjx Adkotd Max. clamping length: 100 mm Max. grinding length: 100 mm Max. workpiece weight: 0.5 kg Workpiece headstock Design: Fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: Oil lubrication Set air pressure: see section 5.3.1 Drive: Servo motor, C1 axis (CNC-controlled) Max. speed: 250 rpm Tailstock Longitudinal adjustment: Manual via gear wheel Tailstock quill Rotating centre: Mounting bore Ø 20 mm Clamping force: Adjustable via pneumatic system Dimensions: 50 x 80 x 178 mm Lubrication: Lifetime grease lubrication Bearing seal: With sealing air Set air pressure: see section 5.3.1 Grinding support (slide) Design: Fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see section 5.3.1 Grinding wheel profiling Fine dressing: Circumference and face with diamond roller, mounted on dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: Lifetime grease lubrication Bearing seal: With sealing air Set air pressure: see section 5.3.1 Drive: 5.3 kW Speed control: Frequency inverter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connected load: 87 kVA

Stanje: rabljeno, Leto izdelave: 2003, Grinding diameter - max. 5-50 mm Grinding length: 350 mm Workpiece length: 50-300 mm Diameter: 5-50 mm Power supply: 70 kVA Machine weight approx. 9 t Space requirement approx. 3300x2950x2400 mm Power supply: 400 V/50 Hz Power: 70 kVA Main fuse: 3x125A Conductor cross-section: 5x25 mm² Cu Workpiece diameter: 5-50 mm Workpiece length: 50-300 mm - Manual loading and unloading - External fully automatic loading system - Fixed workpiece spindle head mounted on grinding table Workpiece spindle unit: Dimensions: 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: with barrier air Drive: with HF motor Iodpfxjyan R Ns Adkjtd Special fixture: Junker standard flange 75 mm Max. speed: 6,000 rpm Tailstock: Longitudinal adjustment: manual Rotating centre: Junker standard flange 48 mm (75 mm) Grinding table: Feed: Z-axis Grinding spindle head: Infeed: X-axis Swivel horizontal: B-axis HF grinding spindle unit I, II, III Dimensions: 165 x 350 mm Flange: 190 mm Standard flange: 127 mm Lubrication: Permanent grease lubrication Bearing seal: with barrier air Drive: 8 kW Balancing: electronic Max. speed: 8,800 rpm Grinding wheel I, II, III Type: Borazon (CBN), vitrified bonded Diameter: 350 mm Bore: 127 mm Width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Stanje: rabljeno, Leto izdelave: 2014, Tehnične podrobnosti: Teža stroja cca: 6,5 t Na voljo so 3 enaki stroji od OEM Junker Jucam 1S 51 je zasnovan za brušenje glavnih ležišč in odmičnih izboklin na puši odmične gredi (izpušna in sesalna stran). Dovod in odvod delov potekata samodejno preko zunanje nakladalne celice. Itedpfx Adex Auufeked

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Max. grinding diameter: 3–220 mm Regulating wheel width: 400 mm Max. grinding wheel width: 400 mm Grinding wheel drive: 55 kW Ijdpfettxg Iox Adkstd Peripheral speed: max. 45 m/sec Regulating wheel dimensions: 350 x 400 x 203 mm Grinding wheel dimensions (CBN): 500 x 400 x 304 mm Grinding wheel dimensions (Corundum): 600 x 400 x 304 mm Total power requirement: 75 kVA Machine weight approx.: 13 t Required floor space approx.: 4.47 x 2.77 x 2.49 m

Stanje: rabljeno, Leto izdelave: 2017, Technical specifications: Ijdpfottxg Sex Adketd Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Machine weight approx.: 22.5 t Required space approx.: 4.7 x 3.65 x 3.0 m

Leto izdelave: 1983, stanje: rabljeno, mould heating, hot air blower, heater, gas heater, construction site heater, building dryer, heater, hall heater, gas-powered heating for casting moulds, foundry technology -Manufacturer: Junker, gas heating system WA 26532 on mobile transport frame -Burner: Wiedemann B202 H2-3 175 kW -Blower: Spelleken 5.5 kW, air flow rate 500 m³/h -Individual components/accessories: see photos -Dimensions: 1500/1250/H2010 mm Itodpfsp Hiyasx Adksd -Weight: 625 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 5.073 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80171, premer brušenja: 500 mm, skupna masa: 10.000 kg, model krmilnika: FANUC SERIES OI-TF, Oprema: podajalnik palic, Brez najnižje cene – zagotovljena prodaja najvišji ponudbi! Plačilni rok za stroj je 04.12.2025! Z oddajo ponudbe se zavezujete k pravočasnemu prevzemu med 10.12.2025 in 12.12.2025! Stroj si je možno ogledati dne 25.11.2025! TEHNIČNI PODATKI Premer brušenja: 500 mm Širina obloge: max. 32 mm Dovoljeni premer rezalnega diska: max. 520 mm Širina obloge rezalnega diska: max. 3 mm Višina obloge rezalnega diska: max. 5 mm PODROBNOSTI STROJA Dimenzije & teža Dimenzije (D x Š x V): 8.500 x 3.500 x 2.900 mm Skupna teža: 10.000 kg Isdpfxexvbufo Adketd Model krmiljenja: FANUC SERIES OI-TF Delovne ure Obdelovalne ure: 5.073 h Obratovalni čas: 12.219 h Ure vklopa krmiljenja: 32.335 h OPREMA Podajalnik palic FMB Minimag 20 Odsesovalna naprava Različna dokumentacija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 8.834 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80042, premer brusilnega koluta: 500 mm, skupna masa: 10.000 kg, model krmilnika: FANUC SERIES OI-TD, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04/12/2025! Placing a bid obliges the buyer to collect the machine on time between 10/12/2025 and 12/12/2025! The machine can be inspected on 25/11/2025! TECHNICAL DETAILS Grinding Wheel Grinding wheel diameter: 500 mm Bond width: max. 32 mm Cut-off Wheel Permissible diameter: max. 520 mm Bond width: max. 3 mm Bond height: max. 5 mm Workpiece Holding Workpiece spindle head, left Chuck type: Hydraulic clamping Workpiece spindle head, right Chuck type: Hydraulic clamping MACHINE DETAILS Control Model: FANUC SERIES OI-TD Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 3 x 125 A Dimensions & Weight Dimensions (L x W x H): 8,500 x 3,500 x 2,900 mm Total weight: 10,000 kg Iodpfx Adjxvbn Ejkstd Operating Hours Machining hours: 8,834 h Running time: 20,892 h Control on-time: 43,292 h EQUIPMENT Bar feeder: FMB

Stanje: rabljeno, Leto izdelave: 2012, Workpiece: Workpiece diameter: 15–70 mm Max. swing diameter: 150 mm Max. clamping length: 500 mm Swing diameter over steady rest area: 70 mm Dimensions: 150 x 300 mm Max. rotational speed: 250 rpm Longitudinal adjustment: manual, via sprocket Fixed center MK 4 (Junker D75 mm) Itedpfxex H Ando Adked Clamping pressure adjustable via hydraulics Traverse path – Z axis: max. 1000 mm Feed Z-axis: CNC-controlled Dimensions: D 205 x 450 mm Flange diameter: D 190 mm Standard boss: D 127 mm Drive power: 30 kW Speed control: via frequency converter Max. speed: 4400 rpm Type: Borazon (CBN) or Diamond grinding wheel Diameter: 450 mm Bore: D 127 mm Maximum peripheral speed: 90 m/sec Type: GR-3520-NR Diameter range: D 20 – D 35 mm Dimensions: D 80 x 250 mm Flange: D 100 Standard boss: D 75 Drive power: 1.8 kW Max. speed: 24,000 rpm Machine weight: approx. 7.0 t According to our assessment, the machine is in good condition and can be inspected under power by prior appointment. There are two identical machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical details and information subject to change and prior sale. Errors excepted.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 11.960 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2416, dolžina brušenja: 1.500 mm, skupna masa: 24.000 kg, TEHNIČNI PODATKI Dolžina brušenja: 1.500 mm PODROBNOSTI O STROJU Dimenzije in teža Itodpfx Aoxvxn Aodkod Potreben prostor: 3.900 x 3.500 x 2.500 m Teža stroja: 24 t Delovne ure Obratovalni čas: 21.727 h Proizvodni čas: 11.960 h OPREMA Hoffmann KSM filtrirna naprava 2 rezervni merilni glavi Marposs S/500 Prizmatična ležišča

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2352, višina središča: 200 mm, dolžina brušenja: 500 mm, premer brušenja: 55 mm, največja hitrost vrtenja: 5.970 obr/min, model krmilnika: Siemens Sinumerik 840-D, TEHNIČNI PODATKI Premer brušenja: 5–55 mm Dolžina brušenja: 500 mm Premer obdelovanca: 5–55 mm Dolžina obdelovanca: maks. 500 mm Postavitev brusnega kolesa: desno, 30° poševno Dimenzije brusnega kolesa: 600 x 30 x 203,2 mm Pogonska moč: 7 kW Pogon X/Z osi: kroglični vretenasti pogon Hitrost pomika: 0,01 – 10.000 mm/min Ločljivost: 1 µm Krožnost vpenjalnega vretena: < 1 µm Največja hitrost vretena: 5.970 min⁻¹ Sistem za menjavo obdelovanca: Fanuc robot Krmiljenje: Siemens Sinumerik 840-D PODATKI O STROJU Skupna priključna moč: 44 kW Višina konice: 200 mm Teža stroja: 7.000 kg OPREMA Konjiček Ijdexvxl Iepfx Adkstd Vzdolžni pomik: ročni Sledilna konica: Junker normirani tulec, premer 75 mm Vpenjalni tlak: nastavljiv preko hidravlike Dimenzija konjička: premer 100 mm × 430 mm