Schaublin 110 Cnc nakup rabljenega (59)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on configuration): 630 mm Headstocks: Standardised spindle nose for use with various collets and chucks, using adaptation accessories. Accessories for SCHAUBLIN collets: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, rated torque: 3 Nm Ball screw, dia. x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, rated torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Djdpfxozb U Epe Anujcn Feeds: Infinitely variable working feeds, X/Z axes: 0–5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, peak power (intermittent): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardised tool holder mounting: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant supply Bi-directional indexing Coolant system: Tank capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position turret VDI 30 for 6 live tool stations 1 pneumatically operated tailstock, ref. 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 revolving live centre Brucker CM5 1 ESX-25 radial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00552 1 ESX-25 axial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00550 1 KENNAMETAL ESX-25, without ESX nut 1 EWS ESX-25, without ESX nut 4 left-hand short radial toolholders, form B2, ref. 4100.0100 1 ESX-25 collet holder, form E3 with EX25 nut and 5 mm collet 1 ditto without EX25 nut 3 tapping collets Ø 4.5 / 6 / 8 mm 1 insert drill holder for indexable drills, Ø 40 mm boring, form E1, ref. 4100.00124 1 ditto, Ø 32 mm boring, ref. 4100.00107 1 ditto, Ø 20 mm boring, ref. 4100.00105 1 boring bar holder, Ø 8 mm, form E2, ref. 4100.00108 1 ditto Ø 10 mm, ref. 4100.0109 1 ditto Ø 12 mm, ref. 4100.0110 2 ditto Ø 16 mm, ref. 4100.0111 1 ditto Ø 20 mm, ref. 4100.0112 1 ditto Ø 25 mm, ref. 4100.0113 1 ditto Ø 32 mm, ref. 4100.0115 1 GARANT long, Ø 32 mm 5 steel protection plugs, form Z2, ref. 4100.00130 1 left-hand axial toolholder, force C4, ref. 4100.00103 1 pneumatically operated tailstock CM5, ref. 180-65.200 1 support stand for microscope, ref. 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref. 180-70.200 CHF 2,500.-- + VAT Except in the case of error or omission, these technical details are provided without obligation.

Stanje: rabljeno, številka stroja/vozila: 1023, Kraj izdelave: Švica Napetost: 380 V, 50 Hz, 3-fazna Neto teža: 740 kg Zunanje dimenzije: 155x110x160 cm Potrebna moč: 2,10 kW Carinska številka: 8459.6930 Vreteno ISO 30, z digitalnim prikazovalnikom Sony LM31 - 3 osi TEHNIČNI PODATKI Navpična pritrdilna plošča: - uporabna pritrdilna površina: 740x200 mm - število T-utorov: 2 - širina T-utorov: 12-H7 mm - razdalja med osmi T-utorov: 120 mm Fiksna kotna plošča: (dodatna oprema 13-5.421) - uporabna pritrdilna površina: 700x250 mm - število T-utorov: 5 - širina T-utorov: 12-H7 mm - razdalja med osmi T-utorov: 40 mm - bočna premikljivost (skupno): 250 mm Nagibna univerzalna plošča: (dodatna oprema 13-5.300) - uporabna pritrdilna površina: 600x210 - število T-utorov: 4 - širina T-utorov: 12-H7 mm - razdalja med osmi T-utorov: 40 mm - bočna premikljivost (skupno): 350 mm Nagib v 3 ravninah, na obeh straneh: 30° - 45° - 30° Notranji konus vretena: - horizontalna glava vretena: Iso 30 (40) - vertikalna glava za rezanje: Iso 30 (40) - univerzalna hitra glava za rezanje: SV E20+ES20 Dcedpfx Anofnrxweujn Možnost vrtenja v navpični ravnini: - vertikalna glava za rezanje: 360° Dolžina giba: z ročnim kolesom/samodejno - plošča: 320/300 mm Navpični gib: z ročnim kolesom/samodejno - konzola: 375/355 mm Prečni gib: z nastavljivo ročico - horizontalna glava vretena: 150 mm Gib vretena - vertikalna glava za rezanje: 60 mm Natančnost odčitavanja na merilnih obročih v treh smereh gibanja: 0,02 Glavni motor kW/ob/min: 1,5/1500 Motor za hitri premik: kW/ob/min 0,45/3000 Motor za sistem hlajenja: kW/ob/min 0,15/3000 Hitrost vretena (brezstopenjska): - 1. območje: 58-375 ob/min - 2. območje: 330-2000 ob/min Napredni pomiki - vzdolžni ali navpični: 12-400 mm/min 10 nastavitev pomika v mm/min: 12-18-26-38-57-85-125- 185-270-400 Hitri pomik (vzdolžni oziroma navpični): 1200 mm/min Pridržana možnost napake ali spremembe. Inventarna številka: 2180233. Stroj, ki ga sestavljajo: 1 fiksna plošča s 4 T-utori 1 digitalni prikazovalnik Sony LM 31 - 3 osi 1 sistem za hlajenje 1 osvetlitev 1 zbiralnik za opilke 1 vpenjalna glava 1 rezalnik, dolg, ISO 30, Ø 13x97 mm, s pivotom 1 enako, Ø 16x97 mm 1 enako, Ø 22x137 mm 1 enako, Ø 27x156 mm 1 rezalnik, kratek, ISO 30, Ø 16x29 1 enako, Ø 22x14 1 enako, Ø 22x37 1 enako, Ø 27x60 1 rezalnik, kratek, ISO 30, za ploščate obdelovance 1 rezalnik, cilindričen, ISO 30, Ø 20 mm 1 enako, Ø 12 mm 1 enako, Ø 6 mm 1 vpenjalna glava ES-32 ISO 30 1 komplet 29 vpenjalnih glav ES-32, različne velikosti 1 redukcijski tulec Alesa ISO 30 / MK3

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 310435, Completely overhauled – new paintwork, new work table Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3Ph Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Centre distance, spindle head type W, standard: 470 mm - Centre distance, spindle head type W with reduction gearbox: 375 mm - Swing over bed: 200 mm - Swing over cross slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Dodpfx Anodr R Tcouscn Bed made of cast iron with ground trapezoidal profile Spindle heads: - Spindle nose for collets: W-25 - Collet bore: 19.0 mm - Reduction ratio of the gear drive: 1:5 Cross slide: - Longitudinal travel of the slide: 90 mm - Cross travel of the slide: 100 mm - Tool shank cross-section: 12x12 mm Tailstocks: - Internal taper of quill: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors and omissions excepted. Technical data provided without obligation. Inventory number 2250023, machine consisting of: 1 NEW workbench 2000 x 800 mm with blue Urphen top 2000 x 800 x 50 mm 1 pedestal, 1 cabinet B750 with 7 drawers (1xD50/2xD75/2xD100/1xD150/1xD200) 1 control console above the planing table 1 workpiece holder W-25 without gearbox, overhauled, with collet spanner 1 overhauled cross slide 1 reconditioned and aligned tailstock 1 motor 380V/50Hz/3 phase, 2 speeds 1 used full centre W-25 1 set of used collets W-25 1 chuck 2x3 jaws Reishauer ZMG Ø 110 mm on W-25 flange, used 1 set used Multifix tool holders, consisting of: - 1 turret type A with AG20 stud - 2 tool holders AD1675 - 2 tool holders AD2090 1 Albrecht drill chuck, self-tightening, capacity 1-13 mm on CM2 shank, used 1 used full centre CM2 OPTIONAL 1 used clamping device with new belt CHF 1,000.-- + VAT 1 GRINDING MACHINE TYPE B-8 with 360° swiveling spindle, max. speed 28,000 rpm, height adjustable, fine adjustment, Ref. 800053 CHF 1,325.-- + VAT

Stanje: dober (rabljeno), Centre height: 130 mm Centre distance: 450 mm Speed: approx. 55–3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets included Various holders included BERGER LAHR axis motors Combitec EIP E-500 control Control manual included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Dcsdpfecuhvusx Anuen Various "Schaublin 102" models available from stock!

Stanje: dober (rabljeno), Right- & left-hand rotation with knee-type reversing switch 2-speed variable Headstock with reduction gear Cross slide with 90 mm travel Tripan tool holder 1 set of W20 collets 2 drawers Lamp 380 VAC Centre distance: 350 mm Dcodpfxed Htvde Anuen Centre height: 102 mm Turning diameter over bed: 200 mm Turning diameter over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 – 3000 rpm / stepless Tailstock quill: MT 2 Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various "Schaublin 102" models in stock!

Stanje: dober (rabljeno), Stopničasti vpenjalni vložek, precizna vpenjalna glava, zvonasta klešča, stopničasta vpenjalna klešča, obročasta vpenjalna glava, puše za vpenjalne klešče, vpenjalna klešča, držalo za orodje, nosilec orodja, vpenjalne puše -Proizvajalec: Schaublin, stopničasta precizna vpenjalna glava, vpenjalna vtičnica MK6 -Velikost: 81 do 106, glej slike -Skupne dimenzije: Ø 131 x 175 mm -Teža: 5,3 kg Dcsdpfeyizh Tjx Anusn

Stanje: dober (rabljeno), Centre height: 102 mm Centre distance: 450 mm Lead / feed shaft W20 collets available Spindle speed: approx. 210 – 3000 rpm Reduction gearbox Left-/right-hand rotation Dcjdpfx Anscug H Sjujn 2-stage drive L x W x H: approx. 1760 x 595 x 1230 mm Weight: approx. 650 kg Various "Schaublin 102" models in stock!

Stanje: dober (rabljeno), Travels X / Y / Z: 475 / 330 / 280 mm Table size (W x D): 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Spindle taper: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Dcjdpfx Ansd Dgdysuen Weight: approx. 950 kg Machine dimensions (W x D x H): approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Range of movement: Longitudinal travel: Table: 330 mm* Per handwheel revolution: 5 mm Vertical travel: Knee: 475 mm* Per handwheel revolution: 2 mm Cross travel: Milling spindle headstock: 400 mm Per handwheel revolution: 5 mm * Both of these movements are equipped with automatic feed and can be controlled via programs. Shortest cycle time: 15 seconds, i.e. up to 4 program sequences per minute. Scale drum reading accuracy: 0.02 mm Main motor: Milling head with 2 speeds Motor: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid traverse motor: 0.55 kW, 1000 rpm Rapid longitudinal feed: 2500 mm/min Rapid vertical feed: 1000 mm/min Feed drive motor: max. 0.2 kW Adjustment range longitudinal: 4 - 500 mm/min Adjustment range vertical: 1.6 - 200 mm/min Coolant system: Motor: 0.15 kW, 3000 rpm Coolant pump delivery rate: 20 l/min Coolant tank capacity: 30 l

Stanje: dober (rabljeno), Centre height: 102 mm Dodpfecpznhox Anujcn Centre distance: 450 mm Spindle bore: 32 mm Reduction gearbox Left/right rotation 2-speed drive Variable speed: 270-3000 rpm Knee-lever control Swing diameter over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories available Manual available Various "Schaublin 102" versions available in stock!