Schaublin 22 nakup rabljenega (51)

Stanje: dober (rabljeno), Z digitalnim prikazom Bodpfx Asw Nnutea Sjwh Z vrtalno in rezkalno glavo Hodi 330 x 400 x 475 mm Vpenjalna površina mize 650 x 245 mm Vreteno ISO 40 Hitrosti vretena 63–2'800 vrt./min Različna dodatna oprema MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Travels X / Y / Z: 475 / 330 / 280 mm Table size (W x D): 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Spindle taper: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine dimensions (W x D x H): approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Range of movement: Longitudinal travel: Table: 330 mm* Per handwheel revolution: 5 mm Vertical travel: Knee: 475 mm* Per handwheel revolution: 2 mm Cross travel: Milling spindle headstock: 400 mm Per handwheel revolution: 5 mm Bedpfx Asd Dgdyea Sowh * Both of these movements are equipped with automatic feed and can be controlled via programs. Shortest cycle time: 15 seconds, i.e. up to 4 program sequences per minute. Scale drum reading accuracy: 0.02 mm Main motor: Milling head with 2 speeds Motor: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid traverse motor: 0.55 kW, 1000 rpm Rapid longitudinal feed: 2500 mm/min Rapid vertical feed: 1000 mm/min Feed drive motor: max. 0.2 kW Adjustment range longitudinal: 4 - 500 mm/min Adjustment range vertical: 1.6 - 200 mm/min Coolant system: Motor: 0.15 kW, 3000 rpm Coolant pump delivery rate: 20 l/min Coolant tank capacity: 30 l

Stanje: rabljeno, Schaublin 102-N80 Švicarski precizni stružnica Tehnične podrobnosti: Višina središča: 102 mm Razdalja med konicami: 450 mm Vijačna odprtina vretena: 32 mm Redukcijski menjalnik Levo-desni tek 2-stopenjski pogon Spremenljiva hitrost: 270-3000 obr/min Kolenski krog Premer struženja nad posteljo: 200 mm Vreteno: W20 Bjdpfx Aaoxxavge Sjwh Repnica: MK 2 Dimenzije (DxŠxV): približno 140x56x123 cm Teža: približno 550 kg Dodatki/možnosti: - 3-čeljustna glava z čeljustmi - 4-čeljustna glava z čeljustmi - nosilci orodij - Schaublinove vpenjalne puše od 0,5 mm Pod napetostjo v našem skladišču.

Stanje: rabljeno, Centre height: 125 mm Centre distance: 500 mm Spindle speed: 45 - 3000 rpm Feed rate: 4 – 260 mm/min Bedpfx Aaebzlglo Sewh Spindle nose: Camlock D1-3" Tailstock taper: MT 2 Swing over bed: 250 mm Swing over cross slide: 120 mm Top slide travel: 100 mm Cross slide travel: 180 mm Dimensions (W x D x H): 1500 x 850 x 1300 mm Weight approx. 950 kg

Stanje: zelo dobro (rabljeno), - Multifix quick-change toolpost “B” - Quick-action collet chuck device Centre height: 150 mm Centre distance: 630 mm Spindle bore: 40 mm Spindle speed (stepless): 55 – 3000 rpm Feed rate: 0.05 – 0.35 mm/rev Spindle / tailstock taper: MT 5 / MT 3 Swing over cross slide: 177 mm Swing over bed: 340 mm Bwodpehmkh Tefx Aa Soh Power: 4.45 kW Dimensions: 1730 x 970 x 1300 mm Weight: 1250 kg

Stanje: zelo dobro (rabljeno), Centre height: 125 mm Centre distance: 500 mm Spindle speed: 45 - 3000 rpm Feed rate: 4 – 260 mm/min Spindle nose: Camlock D1-3" Tailstock taper: MK 2 Swing over bed: 250 mm Swing over cross slide: 120 mm Top slide travel: 100 mm Cross slide travel: 180 mm Dimensions (W x D x H): 1500 x 850 x 1300 mm Bsdjtzxh Tspfx Aa Sswh Weight approx.: 950 kg

Stanje: rabljeno, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over carriage: 120 mm Headstocks Spindle nose for collets type Schaublin W25 Spindle bore: 25 mm Collet capacity: 20 mm Reduction gear ratio: 1:5 Bwodsbxkl Tspfx Aa Seh Bed Height x Width x Length: 168 x 130 x 1000 mm Bed made of cast iron, trapezoidal profile like the 102 N lathe, and hardened and ground dovetail guideways. Carriage Maximum travel on the bed: 400 mm Tool carriage width – length: 80 – 194 mm Travel by hand adjustment: 90 mm Centre height over tool carriage: 20 mm Tool holder shank: 12 x 12 mm Cross slide width – length: 94 – 300 mm Travel by hand adjustment: 100 mm Saddle guide length on bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric pitches: 0.25 – 4 mm Machine plate for 25 imperial pitches: 80 – 6 tpi Tailstock Quill diameter: 30 mm Quill internal taper: 2 Morse Quill travel: 80 mm Coolant System Coolant tank capacity: 23 liters Net Weights Lathe on workbench: approx. 225 kg Lathe on pedestal: approx. 550 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Vpenjalne puše 163 E Premeri: 1,5 - 2,0 - 2,5 - 3,0 - 4,0 - 5,0 - 6,0 - 7,0 - 8,0 - 9,0 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 22 Bwodpsydfvdsfx Aa Seh Šesterokotnik: 5 - 7 - 8 - 10 - 12 - 13 - 14 - 16 - 17 - 19 Skupaj 48 vpenjalnih puš

Stanje: zelo dobro (rabljeno), Centre height 125 mm Bsdpfelyrcijx Aa Sewh Centre distance 500 mm Spindle speeds 40-3000 rpm Various accessories MARCELS MASCHINEN CH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 5.000 obr/min, skupna višina: 1.840 mm, skupna masa: 3.040 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 18i-TB, število osi: 4, This 4-axis CNC horizontal lathe Schaublin 140R was manufactured in 2008. It features a Fanuc 18i-TB CNC control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 - 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 live tooling stations. If you are looking for a high-quality lathe, you should consider the Schaublin 140R CNC machine that we have for sale. Contact us for further information. Additional equipment • The machine is supplied with manuals and a CE certificate of conformity Machine benefits Technical advantages • Live tooling stations: 12 • Maximum tool size: 20 x 20 mm • Live tool speed: 30 - 6,000 rpm • Tailstock A2-3 • Possibility to mount a 3-jaw chuck: yes • Recommended maximum turning diameter: 200 mm Bsdpfx Asyalqgoa Sjwh • Coolant system: tank capacity 180 l, pump capacity 20 l/min, pump pressure 6 bar • Maximum turning diameter: 300 mm • Recommended maximum turning diameter: 250 mm • Equipped with Y-axis and sub-spindle Additional information Machine still under power Dimensions Machine depth 2650 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, obratovalne ure: 2.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 350523, Oprema: CE označba, Voltage: 380V Net weight: 1,400 kg Customs tariff number: 8458.1120 Dimensions (LxWxH): 180 x 128 x 172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Max turning diameter over cross slide: 115 mm Centre height over cross slide: 60 mm Turning length B32: 265 mm Centre height above floor: 1,162 mm HEADSTOCK A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Spindle speed: 50–5,000 rpm AC drive motor power (continuous/intermittent): 5.5 / 7.5 kW AC drive motor torque (continuous/intermittent): 42 / 58 Nm Spindle bore (without clamping key): 39 mm Max bar capacity with collet: 32 mm Max bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force at 5 bar: 1,150 daN CROSS SLIDE Transverse travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC drive motor torque (continuous/intermittent): 4 / 14 Nm Ball screw, dia. x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC drive motor torque (continuous/intermittent): 4 / 14 Nm Ball screw, dia. x pitch: Ø 32 x 5 mm FEED RATES Working feed, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOLING SYSTEM Standardized tool holder mounting: VDI 20 Number of tool stations (fixed / live): 8 / - Maximum tool size: 16 x 16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Bsdpfxex Upuge Aa Sjwh Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Quill outer diameter: 45 mm Quill travel: 70 mm Adjustable thrust force: 25–260 daN All technical details provided without obligation and subject to errors and omissions. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Headstock: Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjustment. Newly painted. Turret: Disassembled, cleaned, worn and defective parts replaced, repainted and faces skimmed. Tailstock: Disassembled, checked, and serviced. Newly painted. Hydraulics and pneumatics: Disassembled, motor checked, hoses and worn or defective parts replaced. X-axis: Disassembled, worn parts such as O-rings, seals, wipers replaced. New ball screw and carriage. Z-axis: Disassembled, worn parts such as O-rings, seals, wipers replaced. New ball screw and carriage. Electrical cabinet: Complete inspection, several relays replaced. Paint: Colours: White RAL 9003 and Grey RAL 7011 Geometry checked to manufacturer’s protocol. Various accessories checked and cleaned. Year of manufacture: 2002

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Schaublin 102N-VM-CF visokoprecizni švicarski tokarilni stroj Letnik: 2005 maks. premer nad posteljo: 200 mm maks. premer nad sani: 120 mm Višina konic: 102 mm Razdalja med konicami: 450 mm Dolžina postelje: 1000 mm Višina postelje: 168 mm Moč: 4,2 kW Hitrost vretena: 100–3000 min⁻¹ (RPM) Vreteno: W25 Prečni hod, os X: 100 mm Ločljivost, os X (radij): 0,01 mm Vzdolžni hod, os Z: 90 mm Ločljivost, os X (radij): 0,01 mm Navojna vretena: - 8 vzdolžnih pomikov - Večji pomiki možni pri uporabi navojske za struženje Maks. presek nožnega držala (sistem Multifix): 10x10 mm Bwedpjw N Rh Ajfx Aa Ssh Držalo za palice (sistem MULTIFIX) premer: 20 mm Konjiček, po višini in strani nastavljiv: Stožčasta izvrtina puše: Mk2 Zunanji premer vretena: 30 mm Hod vretena: 80 mm Prostornina rezervoarja za hladilno tekočino: 23 L Napetost napajanja: 400 V Skupne mere (D x Š x V): 1500 x 510 x 1550 mm Oprema / dodatne možnosti: - Digitalni merilni sistem ACU-RITE, 3 osi X-Z-Z1 Ločljivost X: 0,001 mm Ločljivost Z: 0,005 mm Ločljivost Z1: 0,005 mm - Sistem za hlajenje orodja - Zadnji pločevinasti varnostni ščit - Dvojno stopalo za zagon/zaustavitev in obratna smer vrtenja vretena - Set kolutnih vložkov Schaublin W25 - Litoželezna glava W25 Ø110 mm s čeljustmi - Revolverska glava za hitro menjavo orodij MULTIFIX-A z držali - Pogon za pomožno opremo z jermenom nastavljivo in vrtljivo napenjalo jermena pogonska enota z motorjem jermen Ø6x2500 mm - Konjiček - itd. Pod napajanjem v našem skladišču.

Stanje: rabljeno, Premer struženja nad posteljo: 310 mm Premer struženja nad sani: 160 mm Krmiljenje: BOSCH CNC ALPHA 2 Razdalja med konicami: 340 mm Višina konice: 148 mm Bwsdpfsw Sx Ucox Aa Sjh Hitrost vretena: 3.000 min⁻¹ Os X: 220 mm Os Z: 400 mm Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru pregledati pod napetostjo. Pribor, prikazano orodje in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-precision leadscrew lathe Schaublin 102N-VM Technical data: >> Machine no. 283152 >> Centre height: 102 mm >> Distance between centres: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev Bwodpswvq Tmjfx Aa Sjh >> Metric threads: 20 pitches from 0.25 mm to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock taper: MK2 >> Spindle speeds: 270–3000 rpm, stepless >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws >> Toolholder with 6 insert pockets >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Tool bits, drill chuck (see pictures) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The 102VM also runs quietly at high spindle speeds. The gear set for thread cutting is included, although it may not be complete. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 17.282 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341671, Schaublin 180-CCN naprodaj Bwedpoyb Rwnofx Aa Soh

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 310435, Completely overhauled – newly painted, New workbench Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3-phase Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Centre distance, headstock type W, standard: 470 mm - Centre distance, headstock W with reduction gearbox: 375 mm - Swing over bed: 200 mm - Swing over cross slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Cast iron bed with ground trapezoidal profile Headstock: - Spindle nose for collets: W-25 - Collet pass-through: 19.0 mm - Reduction ratio of gear drive: 1:5 Cross slide: - Longitudinal travel: 90 mm - Cross travel: 100 mm - Tool size (shank cross-section): 12x12 mm Tailstock: - Quill taper: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Subject to error or omission Technical data provided without obligation Inventory no. 2250006, machine consisting of: 1 NEW workbench 2000x800 mm with blue Urphen top 2000x800x50 mm 1 pedestal, 1 cabinet B750 with 7 drawers (1xD50/2xD75/2xD100/1xD150/1xD200) 1 bed, drive from above 1 workpiece headstock W-20 without gear drive, overhauled clamping key 1 overhauled cross slide 1 overhauled, aligned tailstock 1 motor 380V/50Hz/3ph, 2 speeds 1 set of collets W-20 1 chuck 2x3 jaws Ø 100 mm on flange W-20 1 new set of Multifix toolholders including: Bedpfxjdr R Tcj Aa Sewh - 1 turret A with Bolt AG20 - 3 toolholders AD1675 - 1 bar stock holder AH2085 1 keyless drill chuck cap. 1–13 mm with MK2 arbor 1 solid centre MK2 OPTIONAL 1 used clamping fixture with new belt CHF 500.-- + VAT 1 GRINDING MACHINE TYPE B-8 with 360° swiveling spindle, max. speed 28,000 rpm, height-adjustable, fine adjustment, Ref. 800053 CHF 1,325.-- + VAT.

Stanje: dober (rabljeno), dobro delujoč Schaublin s priključki po slikah, s številnimi vpenjali Bwodpfx Aasyaazte Soh

Stanje: dober (rabljeno), Leto izdelave: 1997, premer struženja nad prečnim suportom: 60 mm, izvrtina vretena: 24 mm, moč vretenovega motorja: 7.500 W, vrtljajska hitrost (min.): 30 obr/min, največja hitrost vrtenja: 5.000 obr/min, skupna višina: 1.660 mm, skupna dolžina: 1.700 mm, skupna širina: 1.240 mm, skupna masa: 1.420 kg, CNC stružnica s vpenjalnim tulečkovim vpenjalom F38 Največji stružni premer Ø 200 mm, pomiki X/Z 180/255 mm, revolverska glava SAUTER 8-pozicijska VDI20 (16x16 mm), vreteno 7,5 kW, vretenasti nos A2-4, hitrost vrtenja 30–5000 min⁻¹, premer prehoda palice Ø 32 mm, omejevalnik votlega vretena, krmilje FANUC Series T-20, priročniki Bwsdpfx Aaevu Tvpe Seh

Stanje: rabljeno, Tehnični podatki: Pomik v osi X: 700 mm Število vrtljajev: do 1500 min⁻¹ Pomik: 12 - 1000 mm/min Velikost mize: 1100 x 250 mm Nagibna glava: da Bwjdpsxtnn Tsfx Aa Ssh Dimenzije pribl.: 1750 x 1600 x 1850 mm Teža pribl.: 1900 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 135 High-Precision Lathe with 3-axis K&C DRO (NEW) and Tool Cabinet in Excellent Condition! Technical Data: >> Machine No.: 252409 >> Centre Height: 135 mm >> Centre Distance: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Thread Pitches: 0.25–14 mm >> Tailstock Morse Taper: MK3 >> Spindle Speeds: 55–3000 rpm, stepless >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> New 3-axis DRO by K&C, 12-month manufacturer warranty, operating manual included Bwsdox I Nkujpfx Aa Soh Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool memory (200 tools), taper calculation, radius/diameter switch, quick zeroing, counting direction reversal >> Tool cabinet including: - Several 3-jaw chucks with multiple sets of jaws - Multifix A with holders - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steadies - Coolant system - Centre points - Operator’s manual - Turning tools and much more About the machine: Offered here is a Schaublin 135 high-precision lathe. The machine is in excellent condition, comes from a university, and has had minimal use. Equipped with a new K&C 3-axis DRO and a large range of accessories. Take advantage of the opportunity to inspect the machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 135 High-Precision Lathe with K&C 3-Axis Digital Readout NEW and Accessories Cabinet in Excellent University Condition!!! Technical Specifications: >> Centre Height: 135 mm >> Centre Distance: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Threads: 0.25–14 mm >> Tailstock Taper: MK3 >> Infinitely Variable Speed: 55–3,000 rpm >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> K&C 3-axis Digital Readout, NEW with 12-month manufacturer warranty and operating manual. Functions: mm/inch conversion, coordinate modes ABS/INC, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching. Accessories cabinet contents: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B toolholder, 3 tool holders >> Internal and external quick-action collet chuck Bodpfjx H Szyex Aa Sowh >> Change gears >> 4-jaw chuck >> Face plate >> Fixed and travelling steady rest >> Coolant system >> Centre points >> Operating manual >> and much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, comes from a university environment, and has seen very little use. Equipped with a brand new K&C 3-axis digital readout and a comprehensive range of accessories. Take advantage of the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 135 High-Precision Lathe with 3-axis Digital Readout ELESTA and Accessory Cabinet from a University – Excellent Condition!!! Technical specifications: >> Center Height: 135 mm >> Distance Between Centers: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Threads: 0.25–14 mm >> Tailstock: MT3 >> Stepless Speed Range: 55–3000 rpm >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> 3-axis digital readout ELESTA (Heidenhain scales) >> Accessory cabinet containing: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B, 3 tool holders >> Internal and external quick-action collet clamping devices >> Change gears >> Eccentric chuck >> Faceplates Bodex Hivnspfx Aa Sowh >> Fixed and traveling steadies >> Coolant system >> Centers >> Operating manual >> And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in very good condition, coming from a university and has seen only light use. Equipped with a 3-axis digital readout and extensive accessories. Take advantage of the opportunity to inspect and test the machine under power on site to see its condition for yourself.

Stanje: dober (rabljeno), Tailstock for lathe, counter support for dividing head, indexing fixture -from: Schaublin 102 -Spindle collet: W25 -Drawing: see photos -Dimensions: 450/360/H170 mm Bjdsd Riw Hspfx Aa Sewh -Weight: 11 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341966, Country of Manufacture: Switzerland Voltage: 400/50/3 Net Weight: 2640 kg Customs Tariff Number: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardised spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F48 Maximum bar capacity, diameter: 36 mm/42 mm Automatic chuck, standard diameter: 170 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 5000 min⁻¹ C Axis: Pneumatic clamping cylinder: 2700 daN Bodew T Smhopfx Aa Sewh Cross Slide: Transversal travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Working feed rates X/Z axes, stepless: 0-5000 mm/min Rapid traverse X/Z axes: 8/10 m/min Feed force X/Z axes: 420/670 daN Turret Tooling System: Number of tool stations: 8 Standardised tool holder mounting: VDI 30 Max. size of turning tools: 20 x 20 mm Integrated coolant supply Indexing in both rotational directions Coolant System: Reservoir capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar The technical data is provided as a guideline and is subject to change or correction without obligation.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed Angle Plate Table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 250 mm total Universal Tilting Table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 350 mm total Bwjdpfjw Uc Npex Aa Ssh - Swivelling range on three planes, on either side: 30°- 45°- 30° Spindle Taper: - Horizontal spindle housing: ISO 30 (40) - Vertical milling head: ISO 30 (40) - Universal quick-change head: SV E20+ES20 Vertical Swivelling Range: Vertical milling head: 360° Longitudinal travel: Hand/automatic: 320/300 mm Vertical travel: Hand/automatic: 375/355 mm Transverse travel: Adjustment handle: 150 mm Quill travel: 60 mm Reading accuracy with micrometric vernier: 0.02 mm Main motor (kW/rpm): 1.5/1500 Feed motor (kW/rpm): 0.45/3000 Coolant pump motor (kW/rpm): 0.15/3000 Spindle speed: - 1st range (rpm): 58-375 - 2nd range (rpm): 330-2000 Working feeds - longitudinal or vertical (mm/min): 12-400 - 10 feed rates (mm/min): 12-18-26-38-57-85-125-185-270-400 Rapid traverse (mm/min): Longitudinal or vertical: 1200 Subject to errors or omissions, the technical data is provided without guarantee.