Schaublin 120 nakup rabljenega (55)

Stanje: rabljeno, Manufacturer: Schaublin In our assessment, the machine is in good used condition and can be inspected under power by appointment. Tjdpfxow A Ap To Afrod Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Technical data and information are subject to change and errors excepted. Prior sale reserved.

Stanje: zelo dobro (rabljeno), The used SCHAUBLIN 120 VM precision parallel lathe is a Swiss-made manual lathe of medium/small dimensions, with a centre height of 120 mm, distance between centres of 600 mm, and a spindle bore of 25 mm. Tjdjwqxcfopfx Afred The machine is complete with feeds and various equipment, already equipped with an electrical cabinet and compliant wiring; tooling and condition as shown in the photos.

Stanje: rabljeno, Tehnični podatki: Pomik v osi X: 700 mm Tedpjxtnn Tsfx Afred Število vrtljajev: do 1500 min⁻¹ Pomik: 12 - 1000 mm/min Velikost mize: 1100 x 250 mm Nagibna glava: da Dimenzije pribl.: 1750 x 1600 x 1850 mm Teža pribl.: 1900 kg

Stanje: dober (rabljeno), dobro delujoč Schaublin s priključki po slikah, s številnimi vpenjali Tedpfx Aextqupjfrjd

Stanje: dober (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 160378, premer struženja nad prečnim suportom: 180 mm, izvrtina vretena: 40 mm, premer struženja: 375 mm, višina središča: 160 mm, stružna dolžina: 750 mm, skupna dolžina: 2.500 mm, skupna širina: 1.000 mm, skupna višina: 1.500 mm, največja hitrost vrtenja: 3.000 obr/min, vrtljajska hitrost (min.): 38 obr/min, skupna masa: 2.500 kg, - Operating voltage: 380 V - Maximum workpiece diameter over bed: 375 mm - Maximum workpiece diameter over cross slide: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine longitudinal and cross feeds: 0.015 to 0.21 mm/rev - Longitudinal and cross feeds: 0.025 to 0.35 mm/rev - Cross slide travel on bed: 750 mm - Tool slide travel: 120 mm - Cross slide travel: 215 mm - Center height above tool slide: 32 mm - Tool section: 20 x 20 mm - Tailstock quill taper: Morse 3 Tjdpfsv Irh Djx Afred - Quill stroke: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Including documentation - Suitable workshop cabinet incl. accessories

Stanje: dober (rabljeno), Travels: 300 x 150 x 355 mm Table size: 700 x 250 mm Spindle mount: ISO 30 Todpfeu Eqixex Afrsd Spindle speeds: 58-2000 rpm With digital display Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), The used SCHAUBLIN 102N bench lathe is a Swiss precision manual lathe of compact size, with a center height of 102 mm, a distance between centers of 400 mm, and a spindle bore of 20 mm. There are 2 similar machines available (one with a short bed and quick-change tooling, and the other with a long bed and geared headstock); both are supplied complete with electrical panel and safety guards compliant with regulations; tooling and condition as shown in the photos. Tsdpfswqxcxox Afrjd

Stanje: dober (rabljeno), Leto izdelave: 1997, premer struženja nad prečnim suportom: 60 mm, izvrtina vretena: 24 mm, moč vretenovega motorja: 7.500 W, vrtljajska hitrost (min.): 30 obr/min, največja hitrost vrtenja: 5.000 obr/min, skupna višina: 1.660 mm, skupna dolžina: 1.700 mm, skupna širina: 1.240 mm, skupna masa: 1.420 kg, CNC stružnica s vpenjalnim tulečkovim vpenjalom F38 Tjdpfjvu Tvpjx Afrjd Največji stružni premer Ø 200 mm, pomiki X/Z 180/255 mm, revolverska glava SAUTER 8-pozicijska VDI20 (16x16 mm), vreteno 7,5 kW, vretenasti nos A2-4, hitrost vrtenja 30–5000 min⁻¹, premer prehoda palice Ø 32 mm, omejevalnik votlega vretena, krmilje FANUC Series T-20, priročniki

Stanje: rabljeno, skupna višina: 1.700 mm, skupna širina: 1.600 mm, skupna dolžina: 1.800 mm, Poids à vide : 1 650 kg - Documentation disponible : Oui - Commande : Conventionnelle - Puissance [kW] : 4,0 - Nombre d’axes [pc] : 3 - Course de l’axe X [mm] : 700 - Course de l’axe Y [mm] : 550 - Course de l’axe Z [mm] : 430 - Longueur de table [mm] : 1100 - Largeur de table [mm] : 255 - Porte-outil : ISO30 - Vitesse de broche min. [tr/min] : 38 Tjdjwni Akjpfx Afred - Vitesse de broche max. [tr/min] : 1 500 - Options : Affichage digital - └ Type d’affichage digital : Sony - Dimensions de transport : 1 800 mm x 1 600 mm x 1 700 mm (L x l x H) - Poids de transport [kg] : 1 650 kg - Colis de transport [pc] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/taxe différentielle : TVA récupérable pour les entreprises Livraison et reprise possibles à tout moment pour tout type d’équipement industriel Lukas van Rossum

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Finishing lathe, make SCHAUBLIN, type 102 N 80 No.: BL 280280 Technical data: Specifications: Centre distance approx.: 400 mm Tjdpfx Afjxpxuvjrod Centre height: 102 mm Spindle bore: 26 mm Speeds: see speed chart Width x depth approx.: 1.3 x 0.5 m Machine weight approx.: 0.4 t

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Možni dodatki se lahko dogovorijo na kraju samem. Todpov Natwjfx Afrjd

Stanje: dober (rabljeno), Swing diameter over bed: 270 mm Centre height: 125 mm Distance between centres: 600 mm Tsdpfxstwpyaj Afred Spindle speeds: 30–5000 rpm Control: FANUC 18i Manual Guide Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Centre height: 125 mm Centre distance: 500 mm Spindle speed: 45 - 3000 rpm Feed rate: 4 – 260 mm/min Spindle nose: Camlock D1-3" Tailstock taper: MK 2 Swing over bed: 250 mm Swing over cross slide: 120 mm Top slide travel: 100 mm Cross slide travel: 180 mm Dimensions (W x D x H): 1500 x 850 x 1300 mm Tedpfx Afetzxh Terjd Weight approx.: 950 kg

Stanje: rabljeno, Leto izdelave: 1999, maks. premer droga 42 mm maks. premer vrtenja 180 mm dolžina struženja 350 mm krmiljenje FANUC 18i hitrost glavnega/proti-vretena 6.000 vrt/min število orodnih mest v revolverski glavi 2 x 12 vpenjalo za orodje VDI 25 pomik - x 170 mm Todsxlugmopfx Afrsd pomik - z 350 mm CNC stružno-rezkalni center | SCHAUBLIN - 42S TM-6 z glavnim/protivretenom, 2x revolver, pripravljen za pogonska orodja ter opremljen z avtomatskim podajalnikom palic. Stroj ima 7.856 obratovalnih ur. Stroj je v dobrem stanju in si ga je mogoče ogledati pod napetostjo. Dodatne tehnične podrobnosti so na voljo v priloženi ponudbi.

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 1400 mm Mere dolžina 2650 mm Mere višina 1840 mm Teža stroja 3040 kg Krmilna enota Blagovna znamka FANUC Model 18i-TB Glavni pogon Območje vrtljajev vretena 50 – 5000 Število osi 4 Revolverska glava Pogonska orodja Da Vpenjalni stožec za orodja VDI 30 Tjdpfxoxdfmbj Afrod Orodja Število postaj 12 Dodatna oprema Stroj je priložen z navodili za uporabo in izjavo o skladnosti CE Ta 4-osni CNC horizontalni stružni stroj Schaublin 140R je bil izdelan leta 2008. Opremljen je s CNC krmiljenjem Fanuc 18i-TB, maksimalnim premerom struženja 300 mm in območjem vrtljajev vretena 50 – 5.000 min⁻¹. Ima Y-os in sekundarno vreteno, ponuja revolversko glavo z 12 pogonskimi postajami za orodja. Če iščete visokokakovostne stružne zmogljivosti, razmislite o CNC stroju Schaublin 140R, ki je na voljo za prodajo. Kontaktirajte nas za več informacij. Vrste uporabe Struženje

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Schaublin 102 VM Tsdpfexq D Nuox Afrjd Skupaj bo na zalogi 8 kosov Cena je na kos

Stanje: zelo dobro (rabljeno), L&Z lathe, manufacturer Schaublin 125 Centre height: 135 mm Centre distance: 400 mm Spindle speed: 68 - 2500 rpm Chuck F 160 Tsdpfx Asvi Hqpjfrod Multifix size A Collet system with 44 collets Heidenhain 3-axis digital readout Drive flange for lathe dog Length: 1430 mm Width: 800 mm Height: 1800 mm with pallet Weight: 1100 kg

Stanje: zelo dobro (rabljeno), Centre height 125 mm Tedelyrciepfx Afred Centre distance 500 mm Spindle speeds 40-3000 rpm Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 1968, Stružnica za fino struženje, stružnica, precizna stružnica, univerzalna stružnica s navojnom i vučnom vretenom, univerzalna navojna i vučna stružnica -Proizvajalec: Schaublin, univerzalna navojna in vučna stružnica tip 135 -Postelja stroja: kaljena Tedow Rd Hbspfx Afrsd -Dolžina struženja: 750 mm -Premer struženja nad posteljo: 315 mm -Premer struženja nad izrezom: 355 mm -Premer struženja nad podporo: 150 mm -Premer vretena: 34 mm -Hitrosti vretena: 45 – 3000 vrt/min -Trizobi vpenjalni tok: Forkardt Ø 160 mm -Konus vpetja konjička: MK3 -Pogon: 1,5/3,0 kW -Oprema: omara s predali z 2x podpor, 28x Multifix nosilci orodja, vpenjalne puše, glejte slike -Dimenzije stružnice: 960/1700/V1290 mm -Teža stružnice: 1230 kg -Dimenzije omare: 480/725/V1000 mm -Teža omare: 222 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed Angle Plate Table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 250 mm total Universal Tilting Table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 350 mm total - Swivelling range on three planes, on either side: 30°- 45°- 30° Spindle Taper: - Horizontal spindle housing: ISO 30 (40) - Vertical milling head: ISO 30 (40) - Universal quick-change head: SV E20+ES20 Vertical Swivelling Range: Vertical milling head: 360° Longitudinal travel: Hand/automatic: 320/300 mm Vertical travel: Hand/automatic: 375/355 mm Transverse travel: Adjustment handle: 150 mm Quill travel: 60 mm Reading accuracy with micrometric vernier: 0.02 mm Main motor (kW/rpm): 1.5/1500 Feed motor (kW/rpm): 0.45/3000 Coolant pump motor (kW/rpm): 0.15/3000 Spindle speed: Todpjw Uc Npofx Afrjd - 1st range (rpm): 58-375 - 2nd range (rpm): 330-2000 Working feeds - longitudinal or vertical (mm/min): 12-400 - 10 feed rates (mm/min): 12-18-26-38-57-85-125-185-270-400 Rapid traverse (mm/min): Longitudinal or vertical: 1200 Subject to errors or omissions, the technical data is provided without guarantee.

Stanje: zelo dobro (rabljeno), with NC dividing head Travel paths: 600 x 510 x 510 mm Todpowhlcmofx Afred Spindle taper: BT40 Spindle speeds: up to 12,000 rpm Tool changer: 20 positions Control: SIEMENS 810D Shopmill Through-spindle coolant Zero-point clamping system Various accessories MARCELS MASCHINEN CH

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, številka stroja/vozila: 350735, Country of manufacture: Switzerland Voltage: 400V Net weight: 1570 kg Customs tariff number: 8458.1120 External dimensions: 1830 x 1260 x 1700 mm TECHNICAL DATA Capacities Max. turning diameter: Ø 270 mm Max. permissible diameter over cross slide: Ø 115 mm Centre height above cross slide: 60 mm Turning length B32: 265 mm Headstock: A2-4 Spindle for Schaublin collets: W20 / W25 / F38 / B32 Spindle speed, stepless: 50 - 5,000 rpm Spindle bore (without clamping key): 39 mm Max. bar capacity in W20 collet: 14.5 mm Max. bar capacity in automatic chuck: 32 mm Max. recommended turning diameter: 200 mm Pneumatic clamping Adjustable axial clamping force, force at 5 bar: 1,150 daN Cross slide Cross travel, X-axis: 180 mm Resolution, X-axis (at radius): 0.0005 mm Drive by AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm Drive by AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Feeds Working feeds, X- and Z-axis, stepless: 0 - 5 m/min Rapid traverse, X- and Z-axis: 8 m/min Feed forces, X- / Z-axis, stepless: 503 / 503 daN Tool system: Turret Standardised tool holder mounting: VDI 20 Number of tool stations: 8 Number of stations for driven tools: 4 Drive by AC motor, continuous/intermittent: 0.55 / 1.1 kW Spindle speed, stepless: 30 - 5,000 rpm Max. tool cross-section: 16 x 16 mm Integrated coolant supply and indexing in both directions: yes Coolant Tank capacity: 55 L Pump delivery rate: 10 L/min Pressure: 1.7 bar Tsdpfxjhr Rtnj Afrod Pneumatic tailstock Quill taper: Morse 3 Quill outside diameter: 45 mm Quill stroke: 70 mm Adjustable support force: 25 - 260 daN Centre height from floor: 1,162 mm The technical data is provided without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Z digitalnim prikazom Z vrtalno in rezkalno glavo Hodi 330 x 400 x 475 mm Todpew Nnutsfx Afred Vpenjalna površina mize 650 x 245 mm Vreteno ISO 40 Hitrosti vretena 63–2'800 vrt./min Različna dodatna oprema MARCELS MASCHINEN CH

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341966, Country of Manufacture: Switzerland Voltage: 400/50/3 Net Weight: 2640 kg Customs Tariff Number: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardised spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F48 Maximum bar capacity, diameter: 36 mm/42 mm Automatic chuck, standard diameter: 170 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 5000 min⁻¹ C Axis: Pneumatic clamping cylinder: 2700 daN Cross Slide: Transversal travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Working feed rates X/Z axes, stepless: 0-5000 mm/min Rapid traverse X/Z axes: 8/10 m/min Feed force X/Z axes: 420/670 daN Turret Tooling System: Number of tool stations: 8 Standardised tool holder mounting: VDI 30 Max. size of turning tools: 20 x 20 mm Integrated coolant supply Indexing in both rotational directions Tedpsw T Smhjfx Afrsd Coolant System: Reservoir capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar The technical data is provided as a guideline and is subject to change or correction without obligation.

Stanje: zelo dobro (rabljeno), Twin spindle, C-axis FANUC 18i-TB control Tsdpfx Afowufdqored Turning diameter: up to 300mm Turning length: up to 366mm Main spindle speed: 30–5,000 rpm Sub-spindle speed: 30–6,000 rpm Turret: 12 driven stations C-axis indexing: 0.001 degree Various accessories MARCELS MASCHINEN CH