Schaublin 102 N nakup rabljenega (58)

Stanje: dober (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Schaublin 102 N - VM, Številka stroja: BL 330699, Letnica izdelave: cca 1993, Stroj z vodilnim vretenom, Nodpfx Aljzlc Apetowi Višina konic: 102 mm, Vodilno vreteno: premer 40 mm, kaljeno in brušeno z navojem. Navoj vodilnega vretena: 4 mm. Pomiki: 8 vzdolžnih pomikov od 0,02 do 0,3 mm/obrat. Območje navojev: Metrski: 20 korakov od 0,25 do 4 mm. Colski: 25 korakov od 80 do 6 tpi. Razdalja med konicama: 450 mm, Največji premer struženja nad posteljo: 200 mm, Največji premer struženja nad sani: 120 mm, Vrtljaji vretena do 2.800 min⁻¹, Konjiček, Pribor,

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Schaublin 102 N, št. stroja BL 329218, letnik izdelave približno 1998, največja višina med centri 102 mm, največja razdalja med centri 375 mm, največji premer obdelovanca nad posteljo 200 mm, največji premer obdelovanca nad strojno pripravo 120 mm, največje število vrtljajev vretena do 2.800 vrt/min, podporni konični nastavek, Nodpfx Aozlcz Eoltewi dodatna oprema.

Stanje: rabljeno, TEHNIČNI PODATKI Nwsdsw Ihttopfx Altoi - Višina konice: 102 [mm] - Največji premer nad posteljo: 200 [mm] - Razdalja med konicama: 470 [mm] - Tip vretenaste vpenjalke: W20 - Premer izvrtine: 20 [mm] - Prehod iz palice v vpenjalno glavo: 14,5 [mm] TEŽA IN DIMENZIJE - Potreben prostor: 1500 x 800 [mm] - Višina stroja: 1300 [mm] - Teža stroja: 500 [kg]

Stanje: rabljeno, Centre height: 102 mm Nwsdpfx Alowbi Hpetei Centre distance: 450 mm Spindle bore: 25 mm Spindle speed: 220 - 2600 rpm Accessories have not been checked for completeness Cabinets are not included in the scope of delivery.

Stanje: dober (rabljeno), Centre height: 102 mm Centre distance: 450 mm Spindle bore: 32 mm Nwsdpfxscpznhj Altji Reduction gearbox Left/right rotation 2-speed drive Variable speed: 270-3000 rpm Knee-lever control Swing diameter over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories available Manual available Various "Schaublin 102" versions available in stock!

Stanje: dober (rabljeno), Centre height: 130 mm Centre distance: 450 mm Nedpfjcuhvuex Altewi Speed: approx. 55–3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets included Various holders included BERGER LAHR axis motors Combitec EIP E-500 control Control manual included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Various "Schaublin 102" models available from stock!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 102N precizni stružnica. Namizna izvedba. Dobro ohranjena, popolnoma delujoča. Nsdpeziq Dpofx Altowi Razdalja med konicama 450 mm Višina konice 102 mm Vreteno W20 Premer struženja nad prečnim suportom 120 mm in nad posteljo 200 mm Vpenjalo pinole konjička MK2 Priključek 50 Hz 3x 380 Volt

Leto izdelave: 1987, stanje: rabljeno, Stružnica Schaublin 102N Nodpjzlugyjfx Altewi

Stanje: rabljeno, Potrebuje nekaj nege in nov ravni jermen, sicer v redu. Dodatki – glejte fotografijo. Nwedpfx Alszicgietsi

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), - RABLJEN - KONVENCIONALNI STRUŽNIK SREDINSKA VIŠINA: 102 mm RAZDALJA MED KONCEMA: 450 mm MAKS. PREMER OBDELOVANJA NAD POSTELJO: 200 mm MAKS. PREMER OBDELOVANJA NAD SANMI: 120 mm ZMOGLJIVOST PALICE: 25 mm VRETENO: 50 - 5000 o/min; 3 kW KONUS KONJIČKA: CM 2 PREMER PINOLE: 30 mm HOD PINOLE: 80 mm Nsdpfxoyvlxqe Altjwi REVOLVERSKA GLAVA: MULTIFIX SKUPNE DIMENZIJE: 1500 x 510 x 1550 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Schaublin 102N-VM-CF visokoprecizni švicarski tokarilni stroj Nwodpfjw N Rh Ajx Altji Letnik: 2005 maks. premer nad posteljo: 200 mm maks. premer nad sani: 120 mm Višina konic: 102 mm Razdalja med konicami: 450 mm Dolžina postelje: 1000 mm Višina postelje: 168 mm Moč: 4,2 kW Hitrost vretena: 100–3000 min⁻¹ (RPM) Vreteno: W25 Prečni hod, os X: 100 mm Ločljivost, os X (radij): 0,01 mm Vzdolžni hod, os Z: 90 mm Ločljivost, os X (radij): 0,01 mm Navojna vretena: - 8 vzdolžnih pomikov - Večji pomiki možni pri uporabi navojske za struženje Maks. presek nožnega držala (sistem Multifix): 10x10 mm Držalo za palice (sistem MULTIFIX) premer: 20 mm Konjiček, po višini in strani nastavljiv: Stožčasta izvrtina puše: Mk2 Zunanji premer vretena: 30 mm Hod vretena: 80 mm Prostornina rezervoarja za hladilno tekočino: 23 L Napetost napajanja: 400 V Skupne mere (D x Š x V): 1500 x 510 x 1550 mm Oprema / dodatne možnosti: - Digitalni merilni sistem ACU-RITE, 3 osi X-Z-Z1 Ločljivost X: 0,001 mm Ločljivost Z: 0,005 mm Ločljivost Z1: 0,005 mm - Sistem za hlajenje orodja - Zadnji pločevinasti varnostni ščit - Dvojno stopalo za zagon/zaustavitev in obratna smer vrtenja vretena - Set kolutnih vložkov Schaublin W25 - Litoželezna glava W25 Ø110 mm s čeljustmi - Revolverska glava za hitro menjavo orodij MULTIFIX-A z držali - Pogon za pomožno opremo z jermenom nastavljivo in vrtljivo napenjalo jermena pogonska enota z motorjem jermen Ø6x2500 mm - Konjiček - itd. Pod napajanjem v našem skladišču.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 310435, Completely overhauled – new paintwork, new work table Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3Ph Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm Njdpfxodr R Tco Altjwi - Centre distance, spindle head type W, standard: 470 mm - Centre distance, spindle head type W with reduction gearbox: 375 mm - Swing over bed: 200 mm - Swing over cross slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Bed made of cast iron with ground trapezoidal profile Spindle heads: - Spindle nose for collets: W-25 - Collet bore: 19.0 mm - Reduction ratio of the gear drive: 1:5 Cross slide: - Longitudinal travel of the slide: 90 mm - Cross travel of the slide: 100 mm - Tool shank cross-section: 12x12 mm Tailstocks: - Internal taper of quill: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors and omissions excepted. Technical data provided without obligation. Inventory number 2250023, machine consisting of: 1 NEW workbench 2000 x 800 mm with blue Urphen top 2000 x 800 x 50 mm 1 pedestal, 1 cabinet B750 with 7 drawers (1xD50/2xD75/2xD100/1xD150/1xD200) 1 control console above the planing table 1 workpiece holder W-25 without gearbox, overhauled, with collet spanner 1 overhauled cross slide 1 reconditioned and aligned tailstock 1 motor 380V/50Hz/3 phase, 2 speeds 1 used full centre W-25 1 set of used collets W-25 1 chuck 2x3 jaws Reishauer ZMG Ø 110 mm on W-25 flange, used 1 set used Multifix tool holders, consisting of: - 1 turret type A with AG20 stud - 2 tool holders AD1675 - 2 tool holders AD2090 1 Albrecht drill chuck, self-tightening, capacity 1-13 mm on CM2 shank, used 1 used full centre CM2 OPTIONAL 1 used clamping device with new belt CHF 1,000.-- + VAT 1 GRINDING MACHINE TYPE B-8 with 360° swiveling spindle, max. speed 28,000 rpm, height adjustable, fine adjustment, Ref. 800053 CHF 1,325.-- + VAT

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-precision leadscrew lathe Schaublin 102N-VM Nwjdpfewvq Tmox Altoi Technical data: >> Machine no. 283152 >> Centre height: 102 mm >> Distance between centres: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 mm to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock taper: MK2 >> Spindle speeds: 270–3000 rpm, stepless >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws >> Toolholder with 6 insert pockets >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Tool bits, drill chuck (see pictures) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The 102VM also runs quietly at high spindle speeds. The gear set for thread cutting is included, although it may not be complete. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Leto izdelave: 1987, stanje: rabljeno, Stružnica Schaublin 102N z različnimi orodji Nwsdpfx Aoyhyt Ajltsi

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, pnevmatska naprava za vpenjanje s vpenjalnimi tulecami Nwsdpjzmm Dgjfx Altoi

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Stružnica z vozičkom in orodjem Nedpfx Aezg Hk Tsltjwi

Stanje: rabljeno, Schaublin 102 VM skupaj na zalogi 5 kosov Nwjdpezicwbsfx Altsi cena je na kos 2000 evrov oglejte si fotografije

Stanje: rabljeno, Mechanic's Lathe SCHAUBLIN Type 102 Machine No. 1998 Centre Distance: 350 mm Bed Length (total, from headstock): 635 mm Swing over Bed: 200 mm Centre Height over Bed: 102 mm Swing over Cross Slide: 120 mm Centre Height over Cross Slide: 61 mm Spindle Bore: 18/20 mm Spindle Speed, Gear Stage 1: approx. 120 / 190 / 320 rpm Spindle Speed, Gear Stage 2: approx. 590 / 970 / 1500 rpm Chuck Flange External Thread: M38 x 3 mm Tailstock Taper: MK 1 Drive Motor: 0.55 kW, 920 rpm Electrical Connection: 380V, 50 Hz - Spindle speed via 2 gear stages and 3-step belt change - Main spindle with forward and reverse - Spindle nose with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet equipment with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated indexing plate on main spindle with 48 / 60 / 100 holes - Toolholder mounting approx. 10 x 18 mm with clamping screw - Robust wooden base with 42 mm laminated wood tabletop Nodpfx Aljy Dvf Rjtowi Space requirements with base L x W x H: 1160 x 750 x 1300 mm Weight with base: 150 kg In good condition

Stanje: dober (rabljeno), Centre height: 102 mm Centre distance: 450 mm Lead / feed shaft W20 collets available Spindle speed: approx. 210 – 3000 rpm Reduction gearbox Left-/right-hand rotation 2-stage drive L x W x H: approx. 1760 x 595 x 1230 mm Nodpfscug H Sox Altowi Weight: approx. 650 kg Various "Schaublin 102" models in stock!

Stanje: dober (rabljeno), Right- & left-hand rotation with knee-type reversing switch 2-speed variable Headstock with reduction gear Cross slide with 90 mm travel Tripan tool holder 1 set of W20 collets 2 drawers Lamp 380 VAC Centre distance: 350 mm Centre height: 102 mm Turning diameter over bed: 200 mm Turning diameter over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 – 3000 rpm / stepless Tailstock quill: MT 2 Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various "Schaublin 102" models in stock! Nedpjd Htvdefx Altowi

Stanje: rabljeno, Ročna ročica stružnica SCHAUBLIN tip 102 Mehanična stružnica Št. stroja: 208322 Leto izdelave: ca. 1970 Celotna dolžina postelje: 650 mm Višina konic nad posteljo: 102 mm Višina konic nad suportom: 53 mm Nsdpfx Aljw Iq Umstowi Srednja hitrost vretena: ca. 2.800 obr/min (3 stopnje) Pogonski motor: 0,37 kW, 2.800 obr/min Priključek na omrežje: 380 V, 50 Hz - Ročna ročica za zarezovanje in odrezovanje s precizno nastavljivimi omejitvami - Nosilec nožev z natančno nastavitvijo višine - Vpenjalna kleščna naprava (na voljo samo ena klešča) - Menjava vrtljajev s prelaganjem pogonskega jermena Prostorske zahteve s podmizjem: D x Š x V 1150 x 600 x 1200 mm Teža s podmizjem: 130 kg v dobrem stanju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 100 mm, pomik po osi Z: 90 mm, moč vretenovega motorja: 1.500 W, skupna višina: 1.370 mm, skupna širina: 800 mm, skupna masa: 360 kg, največja dolžina izdelka: 2.000 mm, število osi: 2, Horizontal lathe from 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor-driven headstock. It is equipped with a pneumatic clamping device and a Tripan-111S quick-change toolpost system. The machine comes with a 3-jaw chuck and a tailstock with live center. If you are looking for a high-quality lathe, you should consider the SCHAUBLIN 102Mi W25 we are offering for sale. Contact us for further details. • Headstock: Integrated motor • Mounting: Bench-mounted (CE version) • Cross-slide: Handwheel-operated cross-slide with digital readout • Tailstock: Morse taper 2 Additional Equipment • Workbench: 2000 x 800 x 900 mm • Lista drawer cabinet: 564 x 725 x 850 mm • Pneumatic W25 clamping device with graphite distributor • Tripan-111S quick-change toolpost • Boring bar holder, 30° angled, max. Ø12 mm • 3-jaw chuck W25/Ø100 (cast iron, manual) • Tailstock accessories: Live center 60°, Ø18 mm (Gepy) • Collet set W25 (0.5–25 mm, 50 pieces) • Mebiflex 70 lamp • Max. permissible diameter over bed: 200 mm • Max. permissible diameter over cross-slide: 120 mm (60 mm with rear support) • Center height over bed: 102 mm • Center height over cross-slide: 20 mm • Max. center distance: 470 mm • Bed length: 1,000 mm • Bed height: 168 mm • Main spindle drive: AC motor, 1.5 kW (continuous operation) • Spindle type options: W20 / W25 • Spindle speed (infinitely variable): 100 – 6,000 rpm • Spindle bore: 20 mm (W20) / 25 mm (W25) • Max. bar passage: 14.5 mm (W20) / 19 mm (W25) • Manual slide travel on bed: 442 mm • Cross travel (X axis): 100 mm • X-axis resolution (radius): 0.001 mm (digital) • Longitudinal travel (Z axis): 90 mm (optional: 150 mm for orientable compound slide) • Z-axis resolution: 0.001 mm (digital) Njdpfey Snmvex Altjwi • Trapezoidal leadscrew: Ø 9 x 2 mm pitch • Max. tool shank cross-section: 16 x 16 mm (Multifix system) / 12 x 12 mm (Tripan system) • Toolholder diameter: 20 mm (Multifix system) / 12 mm (Tripan system) • Standard tailstock: Morse 2 internal taper, 30 mm spindle outside diameter, 80 mm stroke • Lever-operated tailstock (optional): W20/W25 internal taper, 40 mm spindle outside diameter, 100 mm stroke • Star-wheel operated tailstock (optional): internal taper W20/W25, 40 mm spindle outside diameter, 150 mm stroke • Quick-actuating lever system (optional): Maximum spindle speed 3,000 rpm • Pneumatic clamping system (optional): Adjustable axial clamping force, 500 daN at 5 bar, Max. spindle speed 6,000 rpm • Spindle lock: Pneumatically actuated, locking torque 48 Nm at 5 bar (max. speed 3,000 rpm) • Steadies (optional): Travelling, fixed steady rest, Ø 0.01 to 40 mm • Electrical connection: 400V, 50/60 Hz, rated current 12A (max. 20A main fuse), +/- 5% permissible voltage fluctuations • Power consumption: 1.8 kVA • Noise level under load at operator station: < 60 dBA • Operating temperature: +15°C to +30°C (+5°C to +40°C for digital measuring devices) • Relative humidity: 5% to 80% • Battery for digital measuring devices: 1x lithium 3V, type CR2032 (power consumption: 45 µA, battery life: 5,000 h continuous operation) • Floor load: 263 kg/m² • Floor load capacity: 113 kg/m² Technical Specification Counter Spindle: No Driven Tools: No

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Control: Fanuc Series 20-T Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Nwedpfx Alozb R Iajtji Spindle speed: 5,000 rpm 8-position turret Minimum quantity lubrication

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on configuration): 630 mm Headstocks: Standardised spindle nose for use with various collets and chucks, using adaptation accessories. Accessories for SCHAUBLIN collets: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Automatic chuck, standard diameter: 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm Maximum spindle speed: 4000 rpm Spindle positioning increment: 0.1° C Axis: Programmable increment: 0.001° Spindle locking torque: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Transverse travel, X axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, rated torque: 3 Nm Ball screw, dia. x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm Driven by AC motor, rated torque: 6 Nm Ball screw, dia. x pitch: 32 x 10 mm Feeds: Infinitely variable working feeds, X/Z axes: 0–5000 mm/min Rapid traverse, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 12 Number of driven tool stations: 6 Driven by AC motor, peak power (intermittent): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Standardised tool holder mounting: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant supply Nwsdpfx Ajzb U Epoltei Bi-directional indexing Coolant system: Tank capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i control 1 A2-6 spindle headstock 1 12-position turret VDI 30 for 6 live tool stations 1 pneumatically operated tailstock, ref. 180-65.200 1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck 1 revolving live centre Brucker CM5 1 ESX-25 radial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00552 1 ESX-25 axial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00550 1 KENNAMETAL ESX-25, without ESX nut 1 EWS ESX-25, without ESX nut 4 left-hand short radial toolholders, form B2, ref. 4100.0100 1 ESX-25 collet holder, form E3 with EX25 nut and 5 mm collet 1 ditto without EX25 nut 3 tapping collets Ø 4.5 / 6 / 8 mm 1 insert drill holder for indexable drills, Ø 40 mm boring, form E1, ref. 4100.00124 1 ditto, Ø 32 mm boring, ref. 4100.00107 1 ditto, Ø 20 mm boring, ref. 4100.00105 1 boring bar holder, Ø 8 mm, form E2, ref. 4100.00108 1 ditto Ø 10 mm, ref. 4100.0109 1 ditto Ø 12 mm, ref. 4100.0110 2 ditto Ø 16 mm, ref. 4100.0111 1 ditto Ø 20 mm, ref. 4100.0112 1 ditto Ø 25 mm, ref. 4100.0113 1 ditto Ø 32 mm, ref. 4100.0115 1 GARANT long, Ø 32 mm 5 steel protection plugs, form Z2, ref. 4100.00130 1 left-hand axial toolholder, force C4, ref. 4100.00103 1 pneumatically operated tailstock CM5, ref. 180-65.200 1 support stand for microscope, ref. 180-60.005 1 coolant system OPTION 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref. 180-70.200 CHF 2,500.-- + VAT Except in the case of error or omission, these technical details are provided without obligation.

Stanje: rabljeno, TECHNICAL DATA - Max. swing over bed: 270 mm - Max. swing over cross slide: 130 mm - Distance between centers: 440 mm - Spindle nose: CAMLOCK D1-3' - Max. bar capacity: 28 mm - Power: 7.5 kW - Spindle speed: 0–5000 rpm, infinitely variable - Travel X x Z: 180 x 400 mm - Working feed rates: 0–5000 mm/min, infinitely variable - Rapid traverse: 7500 mm/min - Power supply: 3-phase 380V 50Hz 14kW - Dimensions: 1700 x 1226 x 1660 mm - Weight: 1415 kg EQUIPMENT - FANUC 20-T CNC control - Multifix 'A' quick-change tool turret Nsdsuhcarjpfx Altewi - SCHAUBLIN B32 collet chuck - Tailstock with handwheel - Coolant tank with pump