Schaublin 102 nakup rabljenega (55)

Stanje: rabljeno, Ročna ročica stružnica SCHAUBLIN tip 102 Iedpfxjw Iq Ume Ah Ajik Mehanična stružnica Št. stroja: 208322 Leto izdelave: ca. 1970 Celotna dolžina postelje: 650 mm Višina konic nad posteljo: 102 mm Višina konic nad suportom: 53 mm Srednja hitrost vretena: ca. 2.800 obr/min (3 stopnje) Pogonski motor: 0,37 kW, 2.800 obr/min Priključek na omrežje: 380 V, 50 Hz - Ročna ročica za zarezovanje in odrezovanje s precizno nastavljivimi omejitvami - Nosilec nožev z natančno nastavitvijo višine - Vpenjalna kleščna naprava (na voljo samo ena klešča) - Menjava vrtljajev s prelaganjem pogonskega jermena Prostorske zahteve s podmizjem: D x Š x V 1150 x 600 x 1200 mm Teža s podmizjem: 130 kg v dobrem stanju

Stanje: zelo dobro (rabljeno), The used SCHAUBLIN 102N bench lathe is a Swiss precision manual lathe of compact size, with a center height of 102 mm, a distance between centers of 400 mm, and a spindle bore of 20 mm. Iiodpfxjwqxcxj Ah Aok There are 2 similar machines available (one with a short bed and quick-change tooling, and the other with a long bed and geared headstock); both are supplied complete with electrical panel and safety guards compliant with regulations; tooling and condition as shown in the photos.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Schaublin 102 VM Skupaj bo na zalogi 8 kosov Iijdexq D Nuepfx Ah Aok Cena je na kos

Stanje: rabljeno, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over carriage: 120 mm Headstocks Spindle nose for collets type Schaublin W25 Spindle bore: 25 mm Collet capacity: 20 mm Reduction gear ratio: 1:5 Bed Height x Width x Length: 168 x 130 x 1000 mm Bed made of cast iron, trapezoidal profile like the 102 N lathe, and hardened and ground dovetail guideways. Carriage Maximum travel on the bed: 400 mm Tool carriage width – length: 80 – 194 mm Travel by hand adjustment: 90 mm Centre height over tool carriage: 20 mm Tool holder shank: 12 x 12 mm Cross slide width – length: 94 – 300 mm Travel by hand adjustment: 100 mm Saddle guide length on bed: 250 mm Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric pitches: 0.25 – 4 mm Iodpfx Ajbxkl Teh Asik Machine plate for 25 imperial pitches: 80 – 6 tpi Tailstock Quill diameter: 30 mm Quill internal taper: 2 Morse Quill travel: 80 mm Coolant System Coolant tank capacity: 23 liters Net Weights Lathe on workbench: approx. 225 kg Lathe on pedestal: approx. 550 kg

Stanje: dober (rabljeno), Centre height: 102 mm Centre distance: 450 mm Lead / feed shaft W20 collets available Spindle speed: approx. 210 – 3000 rpm Reduction gearbox Left-/right-hand rotation 2-stage drive L x W x H: approx. 1760 x 595 x 1230 mm Weight: approx. 650 kg Various "Schaublin 102" models in stock! Ijdscug H Sspfx Ah Ajik

Stanje: rabljeno, TEHNIČNI PODATKI - Višina konice: 102 [mm] - Največji premer nad posteljo: 200 [mm] - Razdalja med konicama: 470 [mm] - Tip vretenaste vpenjalke: W20 - Premer izvrtine: 20 [mm] - Prehod iz palice v vpenjalno glavo: 14,5 [mm] TEŽA IN DIMENZIJE Iedpfxew Ihtte Ah Aoik - Potreben prostor: 1500 x 800 [mm] - Višina stroja: 1300 [mm] - Teža stroja: 500 [kg]

Stanje: rabljeno, Centre height: 102 mm Centre distance: 450 mm Spindle bore: 25 mm Spindle speed: 220 - 2600 rpm Accessories have not been checked for completeness Cabinets are not included in the scope of delivery. Iijdowbi Hpepfx Ah Ask

Stanje: dober (rabljeno), Centre height: 102 mm Centre distance: 450 mm Spindle bore: 32 mm Reduction gearbox Left/right rotation 2-speed drive Variable speed: 270-3000 rpm Knee-lever control Swing diameter over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories available Manual available Iiedpfocpznhjx Ah Ajk Various "Schaublin 102" versions available in stock!

Stanje: dober (rabljeno), Right- & left-hand rotation with knee-type reversing switch 2-speed variable Headstock with reduction gear Cross slide with 90 mm travel Tripan tool holder 1 set of W20 collets 2 drawers Lamp 380 VAC Centre distance: 350 mm Centre height: 102 mm Turning diameter over bed: 200 mm Turning diameter over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 – 3000 rpm / stepless Tailstock quill: MT 2 Iijdpfxed Htvde Ah Ask Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various "Schaublin 102" models in stock!

Stanje: dober (rabljeno), Centre height: 130 mm Centre distance: 450 mm Speed: approx. 55–3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets included Various holders included Iiodpfx Ahecuhvuj Aok BERGER LAHR axis motors Combitec EIP E-500 control Control manual included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Various "Schaublin 102" models available from stock!

Stanje: rabljeno, Schaublin 102-N80 Švicarski precizni stružnica Tehnične podrobnosti: Višina središča: 102 mm Iijdpfx Ajxxavgsh Aok Razdalja med konicami: 450 mm Vijačna odprtina vretena: 32 mm Redukcijski menjalnik Levo-desni tek 2-stopenjski pogon Spremenljiva hitrost: 270-3000 obr/min Kolenski krog Premer struženja nad posteljo: 200 mm Vreteno: W20 Repnica: MK 2 Dimenzije (DxŠxV): približno 140x56x123 cm Teža: približno 550 kg Dodatki/možnosti: - 3-čeljustna glava z čeljustmi - 4-čeljustna glava z čeljustmi - nosilci orodij - Schaublinove vpenjalne puše od 0,5 mm Pod napetostjo v našem skladišču.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 312560, Completely overhauled – new paintwork, New work table Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3Ph Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Distance between centres, headstock type W, standard: 470 mm - Distance between centres, headstock type W with reduction gearbox: 375 mm - Turning diameter over bed: 200 mm - Turning diameter over cross slide: 120 mm Bed: Isdpfx Aedr R Tcoh Asik - Height-width-length: 168-100-1000 mm Bed made of cast iron with ground trapezoidal profile Headstocks: - Spindle nose for collets: W-25 - Collet through-hole: 19.0 mm - Reduction ratio of gearing: 1:5 Cross Slide: - Longitudinal travel of slide: 90 mm - Cross travel of slide: 100 mm - Tool shank cross-section for turning tools: 12x12 mm Tailstocks: - Internal taper of quill: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors and omissions excepted. The technical data is provided without obligation. Inventory no. 2210049, machine consists of: 1 bed 105-11 1 headstock 105-26 1 cross slide 102-45 1 tailstock 105-65 1 Voegtle motor 380V/50Hz/3Ph; 750–3000 rpm; 0.4/0.9 kW 1 set of 40 W20 collets, Ø 0.5 to 20 mm in 0.5 mm increments 1 Tripan 111S toolholder 2 Tripan 131 tool holders 1 Tripan 132 tool holder 1 W20 live centre

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Možni dodatki se lahko dogovorijo na kraju samem. Iiedsv Natwspfx Ah Ask

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-precision leadscrew lathe Schaublin 102N-VM Technical data: >> Machine no. 283152 >> Centre height: 102 mm >> Distance between centres: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 mm to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock taper: MK2 >> Spindle speeds: 270–3000 rpm, stepless >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws Ijdpfx Ahowvq Tmj Asik >> Toolholder with 6 insert pockets >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Tool bits, drill chuck (see pictures) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The 102VM also runs quietly at high spindle speeds. The gear set for thread cutting is included, although it may not be complete. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Schaublin 102N-VM-CF visokoprecizni švicarski tokarilni stroj Letnik: 2005 maks. premer nad posteljo: 200 mm Iodpjw N Rh Aofx Ah Aeik maks. premer nad sani: 120 mm Višina konic: 102 mm Razdalja med konicami: 450 mm Dolžina postelje: 1000 mm Višina postelje: 168 mm Moč: 4,2 kW Hitrost vretena: 100–3000 min⁻¹ (RPM) Vreteno: W25 Prečni hod, os X: 100 mm Ločljivost, os X (radij): 0,01 mm Vzdolžni hod, os Z: 90 mm Ločljivost, os X (radij): 0,01 mm Navojna vretena: - 8 vzdolžnih pomikov - Večji pomiki možni pri uporabi navojske za struženje Maks. presek nožnega držala (sistem Multifix): 10x10 mm Držalo za palice (sistem MULTIFIX) premer: 20 mm Konjiček, po višini in strani nastavljiv: Stožčasta izvrtina puše: Mk2 Zunanji premer vretena: 30 mm Hod vretena: 80 mm Prostornina rezervoarja za hladilno tekočino: 23 L Napetost napajanja: 400 V Skupne mere (D x Š x V): 1500 x 510 x 1550 mm Oprema / dodatne možnosti: - Digitalni merilni sistem ACU-RITE, 3 osi X-Z-Z1 Ločljivost X: 0,001 mm Ločljivost Z: 0,005 mm Ločljivost Z1: 0,005 mm - Sistem za hlajenje orodja - Zadnji pločevinasti varnostni ščit - Dvojno stopalo za zagon/zaustavitev in obratna smer vrtenja vretena - Set kolutnih vložkov Schaublin W25 - Litoželezna glava W25 Ø110 mm s čeljustmi - Revolverska glava za hitro menjavo orodij MULTIFIX-A z držali - Pogon za pomožno opremo z jermenom nastavljivo in vrtljivo napenjalo jermena pogonska enota z motorjem jermen Ø6x2500 mm - Konjiček - itd. Pod napajanjem v našem skladišču.

Stanje: rabljeno, Tehnični podatki: Pomik v osi X: 700 mm Število vrtljajev: do 1500 min⁻¹ Iedpfjxtnn Tjx Ah Asik Pomik: 12 - 1000 mm/min Velikost mize: 1100 x 250 mm Nagibna glava: da Dimenzije pribl.: 1750 x 1600 x 1850 mm Teža pribl.: 1900 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 135 High-Precision Lathe with 3-axis K&C DRO (NEW) and Tool Cabinet in Excellent Condition! Technical Data: >> Machine No.: 252409 >> Centre Height: 135 mm >> Centre Distance: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Thread Pitches: 0.25–14 mm >> Tailstock Morse Taper: MK3 >> Spindle Speeds: 55–3000 rpm, stepless >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> New 3-axis DRO by K&C, 12-month manufacturer warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool memory (200 tools), taper calculation, radius/diameter switch, quick zeroing, counting direction reversal >> Tool cabinet including: - Several 3-jaw chucks with multiple sets of jaws - Multifix A with holders - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steadies - Coolant system - Centre points Iisdox I Nkuspfx Ah Aek - Operator’s manual - Turning tools and much more About the machine: Offered here is a Schaublin 135 high-precision lathe. The machine is in excellent condition, comes from a university, and has had minimal use. Equipped with a new K&C 3-axis DRO and a large range of accessories. Take advantage of the opportunity to inspect the machine under power on site and see the condition for yourself.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, številka stroja/vozila: 350735, Country of manufacture: Switzerland Voltage: 400V Net weight: 1570 kg Customs tariff number: 8458.1120 External dimensions: 1830 x 1260 x 1700 mm TECHNICAL DATA Capacities Max. turning diameter: Ø 270 mm Max. permissible diameter over cross slide: Ø 115 mm Centre height above cross slide: 60 mm Turning length B32: 265 mm Headstock: A2-4 Spindle for Schaublin collets: W20 / W25 / F38 / B32 Spindle speed, stepless: 50 - 5,000 rpm Spindle bore (without clamping key): 39 mm Max. bar capacity in W20 collet: 14.5 mm Max. bar capacity in automatic chuck: 32 mm Max. recommended turning diameter: 200 mm Pneumatic clamping Adjustable axial clamping force, force at 5 bar: 1,150 daN Cross slide Cross travel, X-axis: 180 mm Resolution, X-axis (at radius): 0.0005 mm Drive by AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm Drive by AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Feeds Working feeds, X- and Z-axis, stepless: 0 - 5 m/min Rapid traverse, X- and Z-axis: 8 m/min Iodpfx Ashr Rtnjh Asik Feed forces, X- / Z-axis, stepless: 503 / 503 daN Tool system: Turret Standardised tool holder mounting: VDI 20 Number of tool stations: 8 Number of stations for driven tools: 4 Drive by AC motor, continuous/intermittent: 0.55 / 1.1 kW Spindle speed, stepless: 30 - 5,000 rpm Max. tool cross-section: 16 x 16 mm Integrated coolant supply and indexing in both directions: yes Coolant Tank capacity: 55 L Pump delivery rate: 10 L/min Pressure: 1.7 bar Pneumatic tailstock Quill taper: Morse 3 Quill outside diameter: 45 mm Quill stroke: 70 mm Adjustable support force: 25 - 260 daN Centre height from floor: 1,162 mm The technical data is provided without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Travels: 300 x 150 x 355 mm Table size: 700 x 250 mm Spindle mount: ISO 30 Iiodpfsu Eqixjx Ah Aek Spindle speeds: 58-2000 rpm With digital display Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Control: Fanuc Series 20-T Turning diameter: 330 mm Bar diameter: 42 mm Turning length: 650 mm Iiodpfowh U Dtsx Ah Aek Spindle speed: 5,000 rpm 8-position turret Minimum quantity lubrication

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 135 High-Precision Lathe with K&C 3-Axis Digital Readout NEW and Accessories Cabinet in Excellent University Condition!!! Isdex H Szyspfx Ah Asik Technical Specifications: >> Centre Height: 135 mm >> Centre Distance: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Threads: 0.25–14 mm >> Tailstock Taper: MK3 >> Infinitely Variable Speed: 55–3,000 rpm >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> K&C 3-axis Digital Readout, NEW with 12-month manufacturer warranty and operating manual. Functions: mm/inch conversion, coordinate modes ABS/INC, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching. Accessories cabinet contents: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B toolholder, 3 tool holders >> Internal and external quick-action collet chuck >> Change gears >> 4-jaw chuck >> Face plate >> Fixed and travelling steady rest >> Coolant system >> Centre points >> Operating manual >> and much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, comes from a university environment, and has seen very little use. Equipped with a brand new K&C 3-axis digital readout and a comprehensive range of accessories. Take advantage of the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341966, Country of Manufacture: Switzerland Voltage: 400/50/3 Net Weight: 2640 kg Customs Tariff Number: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter over cross slide: 160 mm Iijdpfow T Smhox Ah Aok Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardised spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F48 Maximum bar capacity, diameter: 36 mm/42 mm Automatic chuck, standard diameter: 170 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 5000 min⁻¹ C Axis: Pneumatic clamping cylinder: 2700 daN Cross Slide: Transversal travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Working feed rates X/Z axes, stepless: 0-5000 mm/min Rapid traverse X/Z axes: 8/10 m/min Feed force X/Z axes: 420/670 daN Turret Tooling System: Number of tool stations: 8 Standardised tool holder mounting: VDI 30 Max. size of turning tools: 20 x 20 mm Integrated coolant supply Indexing in both rotational directions Coolant System: Reservoir capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar The technical data is provided as a guideline and is subject to change or correction without obligation.

Stanje: dober (rabljeno), Swing diameter over bed: 270 mm Centre height: 125 mm Distance between centres: 600 mm Spindle speeds: 30–5000 rpm Iiodpfjtwpyasx Ah Aok Control: FANUC 18i Manual Guide Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 135 High-Precision Lathe with 3-axis Digital Readout ELESTA and Accessory Cabinet from a University – Excellent Condition!!! Technical specifications: >> Center Height: 135 mm >> Distance Between Centers: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Threads: 0.25–14 mm >> Tailstock: MT3 >> Stepless Speed Range: 55–3000 rpm >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: Iiedjx Hivnjpfx Ah Ask >> 3-axis digital readout ELESTA (Heidenhain scales) >> Accessory cabinet containing: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B, 3 tool holders >> Internal and external quick-action collet clamping devices >> Change gears >> Eccentric chuck >> Faceplates >> Fixed and traveling steadies >> Coolant system >> Centers >> Operating manual >> And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in very good condition, coming from a university and has seen only light use. Equipped with a 3-axis digital readout and extensive accessories. Take advantage of the opportunity to inspect and test the machine under power on site to see its condition for yourself.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed Angle Plate Table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 250 mm total Universal Tilting Table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 350 mm total - Swivelling range on three planes, on either side: 30°- 45°- 30° Spindle Taper: - Horizontal spindle housing: ISO 30 (40) Iiedpfx Ahsw Uc Npj Aok - Vertical milling head: ISO 30 (40) - Universal quick-change head: SV E20+ES20 Vertical Swivelling Range: Vertical milling head: 360° Longitudinal travel: Hand/automatic: 320/300 mm Vertical travel: Hand/automatic: 375/355 mm Transverse travel: Adjustment handle: 150 mm Quill travel: 60 mm Reading accuracy with micrometric vernier: 0.02 mm Main motor (kW/rpm): 1.5/1500 Feed motor (kW/rpm): 0.45/3000 Coolant pump motor (kW/rpm): 0.15/3000 Spindle speed: - 1st range (rpm): 58-375 - 2nd range (rpm): 330-2000 Working feeds - longitudinal or vertical (mm/min): 12-400 - 10 feed rates (mm/min): 12-18-26-38-57-85-125-185-270-400 Rapid traverse (mm/min): Longitudinal or vertical: 1200 Subject to errors or omissions, the technical data is provided without guarantee.