Natančen stružnica

Schaublin 180-CCN R-TM

TECHNICAL SPECIFICATIONS

Capacities:
Maximum turning diameter: 270 mm
Maximum diameter over cross slide: 160 mm
Centre height over cross slide: 83 mm
Maximum diameter over bed: 430 mm
Turning length (depending on configuration): 630 mm

Headstocks:
Standardised spindle nose for use with various collets and chucks, using adaptation accessories.
Accessories for SCHAUBLIN collets: B45/F66
Maximum bar capacity, diameter: 36 mm / 60 mm
Automatic chuck, standard diameter: 210 mm
Direct drive by AC motor, power at 100% / 50% duty cycle: 15 / 18.5 kW
Maximum torque at 100% / 50% duty cycle: 135 / 165 Nm
Maximum spindle speed: 4000 rpm
Spindle positioning increment: 0.1°

C Axis:
Programmable increment: 0.001°
Spindle locking torque: 80 Nm
Pneumatic clamping cylinder: 3400 daN

Cross Slide:
Transverse travel, X axis: 230 mm
Radial resolution: 0.0005 mm
Driven by AC motor, rated torque: 3 Nm
Ball screw, dia. x pitch X: 32 x 5 mm
Longitudinal travel, Z axis: 720 mm
Resolution: 0.001 mm
Driven by AC motor, rated torque: 6 Nm
Ball screw, dia. x pitch: 32 x 10 mm

Feeds:
Infinitely variable working feeds, X/Z axes: 0–5000 mm/min
Rapid traverse, X/Z axes: 8 / 10 m/min
Feed force, X/Z axes: 420 / 670 daN

Turret tool system:
Number of tool stations: 12
Number of driven tool stations: 6
Driven by AC motor, peak power (intermittent): 3.7 kW
Maximum intermittent torque: 36 Nm
Maximum drive speed: 5000 rpm
Standardised tool holder mounting: VDI 30
Maximum tool shank section: 20 x 20 mm
Integrated coolant supply
Bi-directional indexing

Coolant system:
Tank capacity: 120 litres
Pump flow rate: 10 l/min
Csdpfxozb U Epo Acteha
Pressure: 5 bar

Inventory 2230043 includes:

1 Fanuc 18i control
1 A2-6 spindle headstock
1 12-position turret VDI 30 for 6 live tool stations
1 pneumatically operated tailstock, ref. 180-65.200
1 SCHUNK Rota-s 200-52 A2-6'' 3-jaw chuck
1 revolving live centre Brucker CM5
1 ESX-25 radial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00552
1 ESX-25 axial drilling-milling head, max. speed 5000 rpm, without ESX nut, ref. 4100.00550
1 KENNAMETAL ESX-25, without ESX nut
1 EWS ESX-25, without ESX nut
4 left-hand short radial toolholders, form B2, ref. 4100.0100
1 ESX-25 collet holder, form E3 with EX25 nut and 5 mm collet
1 ditto without EX25 nut
3 tapping collets Ø 4.5 / 6 / 8 mm
1 insert drill holder for indexable drills, Ø 40 mm boring, form E1, ref. 4100.00124
1 ditto, Ø 32 mm boring, ref. 4100.00107
1 ditto, Ø 20 mm boring, ref. 4100.00105
1 boring bar holder, Ø 8 mm, form E2, ref. 4100.00108
1 ditto Ø 10 mm, ref. 4100.0109
1 ditto Ø 12 mm, ref. 4100.0110
2 ditto Ø 16 mm, ref. 4100.0111
1 ditto Ø 20 mm, ref. 4100.0112
1 ditto Ø 25 mm, ref. 4100.0113
1 ditto Ø 32 mm, ref. 4100.0115
1 GARANT long, Ø 32 mm
5 steel protection plugs, form Z2, ref. 4100.00130
1 left-hand axial toolholder, force C4, ref. 4100.00103
1 pneumatically operated tailstock CM5, ref. 180-65.200
1 support stand for microscope, ref. 180-60.005
1 coolant system

OPTION

1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref. 180-70.200 CHF 2,500.-- + VAT

Except in the case of error or omission, these technical details are provided without obligation.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.