Portal Glodalica nakup rabljenega (1.580)

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 47040940, merilno območje os X: 3.500 mm, merilno območje osi Y: 6.000 mm, merilno območje os Z: 2.000 mm, vrsta vhodnega toka: trifazni, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Gantry coordinate measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Mobile control console Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19"/24" Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, width 1,000 mm, 7 drawers Nodpowyag Rjfx Abbekt Contents: Infrared probe, Manufacturer Renishaw, Type PH10M, calibration pin, accessories

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 0112, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 9.000 obr/min, Oprema: dokumentacija / priročnik, Brez minimalne cene – zagotovljena prodaja ponudniku z najvišjo ponudbo! Naklad lahko poteka 08.09.2025 ali 09.09.2025! TEHNIČNI PODATKI Pomiki osi Pomik X: 1.500 mm Pomik Y: 3.500 mm Pomik Z: 1.000 mm Dimenzije delovne mize: 4.500 x 1.600 mm Vreteno in orodja Nedpfxjw Hrh Hs Abbskt Maks. hitrost vrtenja vretena: 9.000 min⁻¹ Kotna glava, območje nagiba (os B): ±90° Vpenjalo orodja: SK 40 PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 8.000 x 5.000 x 3.700 mm Teža: 32.000 kg OPREMA 2 strojska primeža znamke ALMATIC Razna vpenjala za stroj Tehnična dokumentacija

Stanje: rabljeno, največja dovoljena obremenitev: 20.500 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/1996, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.250 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Wellmeyer 2-axle flatbed curtain side trailer with Edscha sliding roof – steering axle – portal doors * Chassis number: WKESD00000623359 – immediately ready for use & collection * Air suspension – BPW axles – disc brakes – Tyres: 385/65 R 22.5 Nedpfjxglfisx Abbskt * Load area length: 13,300 mm – total length: 13,850 mm * Load area width: 2,480 mm – total width: 2,550 mm * Internal height: approx. 2,250 mm – total height: 4,000 mm * Permissible total weight: 28,000 kg – unladen weight: 7,500 kg – payload: 20,500 kg * German vehicle – German registration papers – very well-maintained condition * PICK-UP PRICE – AS IS, TAKE AWAY – WITHOUT MOT – WITHOUT NUMBER PLATES * Please arrange an appointment for viewing * Contact: Mr. Andreas Vogel * The information provided online is non-binding and for descriptive purposes only. * They do not constitute guaranteed characteristics. * The seller assumes no liability for typing or transmission errors. * Subject to change, errors, and prior sale.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 01/2006, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.200 mm, skupna dolžina: 9.940 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, medosna razdalja: 5.130 mm, barva: drugo, Leto izdelave: 2006, Axle configuration Tyre size: 385/65 R 22.5 Suspension: Air suspension Rear axle 1: Tyre tread left: 80%; Tyre tread right: 80% Rear axle 2: Lift axle; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 3: Tyre tread left: 80%; Tyre tread right: 80% Weights Unladen weight: 5,160 kg Payload: 21,840 kg Gross vehicle weight: 27,000 kg Condition Technical condition: very good Visual condition: very good Identification Registration number: WS-RB-50 = Company information = Nodpfeu A Anbex Abbjkt For more photos see: Why buy from Thomas Trucks? The choice is simple. Thomas Trucks is one of the world's independent trading companies specialising in commercial vehicles. Here you can choose from an ever-changing stock of used trucks, tractors, trailers, and semi-trailers. Our inventory includes all European brands, years of manufacture, and price ranges. You will always find a good vehicle at the right price! Thomas Trucks always offers: - Competitive prices - Good service - Spacious and fast-rotating stock - Proven quality - Proper business conduct - Multilingual staff - Assistance with registration and transport - (Export) registration plates arranged quickly - Professional technical services - And more. Visit our website: and check out our full inventory and competitive offers. We are open 6 days a week. Do you need help with the export, import, or shipping of your vehicle? Contact our sales team. You can also sell your current vehicle to us. We do our best to display the information as accurately as possible; however, no rights can be derived from these details. We can also arrange financing for you in the Netherlands.

Stanje: rabljeno, Leto izdelave: 2014, X-axis travel: 1250 mm, Y-axis travel: 1280 mm, Z-axis travel: 150 mm, Max. feed rate: 15 m/min, Repeatability: 0.01 mm, Spindle speed: 0–24,000 rpm, Software: VCarve Pro, Data formats: HPGL-3D / G-Code, Spindle power: 6.5 kW, Control system: Siemens Sinumerik 808D Milling, Weight: 1.2 t, with collet spindle, phenolic vacuum high-pressure table, 850 W Yaskawa servo motors, steel base frame, precision ball screw drives on all axes, X-axis with dual drive, linear guides, protective cover for all drive axes, extraction foot for chip extraction, automatic spray cooling, and material sensor. Nkjdjwqd Rhjpfx Abbst

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC gantry flame cutting system from ESAB is available. Track gauge: 4000 mm, cutting dimensions X/Y: 3000 mm / 6000 mm, rail length: 8000 mm, rail height: 465 mm, table height: 700 mm, cutting speed: 24 m/min, cutting table dimensions X/Y: 3100 mm / 6180 mm. Cutting processes: Oxy-fuel / Plasma, torch: Cooljet-Pro, plasma power source: m3 202 EPP 202 GEN 2, plasma torch: PT-36. Filtration capacity: 9000 m³/h, filter surface area: 180 m², particle size: 0.1 µm. The plasma power source cooling requires repair. Documentation available. On-site inspection possible. Nedpfx Absw Azu Iobokt

Stanje: pripravljen za uporabo (rabljen), Drilling capacity (steel): 100 mm, max. pitch circle diameter: 7000 mm, spindles: 2, spindle speed: 3000 rpm, spindle taper: ISO 50, drilling carriage stroke: 900 mm, feed rate: 6 m/min, power: 125 kW. Machine dimensions X/Y/Z: approx. 13000 mm / 11000 mm / 5100 mm, weight: approx. 18000 kg. Inspection on site is possible. Nksdovriq Rspfx Abbet

Stanje: dober (rabljeno), Sturdy crane system, ideal for glass storage or workshops, Load capacity: 3 t, Length: 14,250 mm, Nkedpfsryv S Aex Abbst Width: 8,500 mm, Height: 3,650 mm Maximum hook height: 3,280 mm, Maximum overall height: 3,950 mm.

Stanje: novo, Leto izdelave: 2025, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 800 mm, 🚀 EMO Trade Fair Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – and you have the unique opportunity to secure this model straight from the show floor at a special price! 🔧 Technical Highlights: ✅ Travel distances: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4,000 kg ✅ Precision: positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool and mold making, automotive, and aerospace industries. Further technical data can be found in the attachment and here: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Nkodpfxjw N I A Dj Abbst Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (LxW) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × spacing × number) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor output X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool stations 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Power consumption 60 kVA Machine dimensions (LxWxH) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main configuration 1 FANUC 0i-MF plus absolute, type 0 system, 15 inch color LCD 2 iHMI+Handbook I 3 Max.1500, min.400 block lookahead 4 Data server (2GB) 5 Fast Ethernet card 6 Interpolation type straightness compensation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting 11 3-color signal light 12 Portable MPG 13 Automatic shutdown 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level detection 17 Direct-drive spindle HSK A63, 15,000 rpm 18 Oil cooler for spindle 19 Machining air blower 20 Coolant system 21 Spindle air seal 22 Airgun/water gun 23 Grease lubrication system 24 Pneumatic system 25 Full protective enclosure 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Isolated control cabinet for high and low voltage 29 Chain-type chip conveyor 30 Adjustable leveling bolts and foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools 39 FAGOR absolute scales for X, Y, and Z axes 40 Sealed iron package 👉 Request more information and secure your special price: New Skymaster VM2000 CNC Gantry Milling Machine – Kraft Werkzeugmaschinen

Stanje: novo, Leto izdelave: 2023, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.500 mm, (Distance between machine stands 3,520 mm) Z= 1,500 mm Nkedpfx Asqrq Emobbst Heidenhain control system Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 rpm / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective enclosure Electronic handwheel 2 x chip conveyors 60-position tool changer

Leto izdelave: 1980, Stanje: pripravljen za uporabo (rabljen), Max. speed: 2500 rpm, feed rate: 5–500 mm/min. Nedpfx Abjfdzzyobjkt

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Operating hours: approx. 40,000 h, there is only limited documentation available, the machine has been regularly maintained, suitable for aluminium and wood, available from June/July 2024, on-site inspection is possible. Nksdpfx Aop S Sq Ijbbjt

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Na prodaj je portalna naprava za avtomatizirano opremljanje ali transport težkih delov. Ta portalna naprava je primerna za različne naloge opremljanja (rezkalni stroji / stružnice / lakirne linije / varilni sistemi). Hod v osi X – 11,6 metra, hod v osi Y – 2,38 metra, hod v osi Z – 2,5 metra. Vse osi so gnane s SEW servomotorji. Servomotorska enojna klešča za kose do 500 kg mase. Krmilna omara – PLC krmiljenje – Siemens S7–1500 ter SEW pogoni. Nedpfx Abewdnb Dsbokt Portalno napravo si je možno po dogovoru ogledati v Overathu.

Stanje: dober (rabljeno), Leto izdelave: 2025, Portalni stiskalni zabojnik 8m3 popolnoma obnovljen, nove hidravlične cevi, vodilni bloki in cilinder Znamka: Husmann Tip: SPB 8 AN-E Nodjxtmviepfx Abbekt Leto izdelave: obnova 2025 Izpustna vrata: zgoraj vpet tečaj Priklop: portalni

Leto izdelave: 1987, Stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Nsdpoin Ub Tofx Abbjkt Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.612 mm, pomik osi Y: 5.645 mm, pomik po osi Z: 1.250 mm, dolžina mize: 7.000 mm, širina mize: 2.500 mm, največja hitrost vretena: 4.500 obr/min, razdalja med stojali: 3.800 mm, Technical data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between columns: 3,800 mm • Distance table surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed in 2 steps, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC mode (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axis each: 25,000 mm/min • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain iTNC 530 path control with 15" monitor • Tool changer with 60 stations • Rotary table for operating multiple milling heads with automatic milling head change, consisting of collet chuck system for accommodating various milling heads, quick couplings for hydraulics, coolant, and power supply, as well as the respective electrical safety switches • Centering of the milling heads on the rotary table via Hirth face gearing (on mounting plate and respective milling head) • 2 x milling heads: straight extension milling head (direct spindle), automatic 45° milling head • Cross beam motorized travel (for positioning only) • Operator platform: 2 operator platforms with protective enclosure and integrated control panel, traveling in X-direction, each with 2 doors • Chip conveyor on both sides of the table as well as a cross conveyor • Longitudinal drive X-axis and cross drive Y-axis using rack and pinion and 2 servo motors (backlash-free electronically preloaded, master-slave principle) • Vertical adjustment Z-axis via ball screw spindle (Ø 80) and preloaded double nut • Zayer guide system consisting of seated or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on every running surface • Counter-guides of all axes additionally plastic-coated for optimal damping Nkodpoxgr Epsfx Abbot • Anchoring and leveling elements • The machine complies with the current EC directives The information stated above is taken from the machine documentation. The seller assumes no liability for its completeness or accuracy. The decisive factor is the actual technical data and functions of the machine.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 9.380 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4455, numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Nksdpfor E D Easx Abbst conveyor belt for scrap metal removal Ruwac Zone 22 extraction system

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.500 mm, pomik osi Y: 3.100 mm, pomik po osi Z: 1.000 mm, širina mize: 2.000 mm, dolžina mize: 7.000 mm, skupna masa: 180.000 kg, leto zadnje generalne obnove: 2016, Table: 7020 x 1810 mm – Please note portal width: 2250 mm Travel range: X = 7387 mm, Y = 3070 mm, Z = from table up to max. without tool: 920 mm + W 1000 Control system: Heidenhain iTNC 530 Nodpewx Nltsfx Abbjkt Simultaneous operation: X, Y, Z axes – yes; A, B, C axes – with 1° Hirth coupling Spindle type: SK50 / geared spindle Four attachment heads Internal spindle cooling: Yes Operating hours: 95,475 h Spindle hours: 37,984 h Modernizations performed: 2003 – control and drives renewed

Stanje: novo, x-axis travel 300 mm y-axis travel 200 mm z-axis travel 350 mm Table size 700 x 200 mm Spindle taper ISO 40 Speed range - horizontal 150 - 1660 rpm Speed range - vertical 110 - 1230 rpm Quill stroke 120 mm Spindle motor 3.0 kW Machine weight approx. 1.15 t Space required approx. 1.31 x 1.38 x 1.65 m Ideally suited for training purposes, featuring: • Automatic feed on all axes • Steady rest for horizontal milling • Clearly arranged control panel • Handwheel-operated quill • Hardened and ground guideways • Steady rest for horizontal milling included as standard • 3-axis digital readout Nsdsfrzunopfx Abbskt Scope of delivery (included in price): Chip tray, mounting arm for vertical head, coolant device.

Stanje: novo, x-travel 600 mm y-travel 300 mm z-travel 350 mm Table size 1120 x 260 mm Spindle taper ISO 40 Spindle speeds 67 - 2010 rpm Quill stroke 120 mm Drilling capacity in steel 40 mm Total power requirement 2.2 kW Machine weight approx. 1.3 t Required space approx. 1.58 x 1.45 x 2.15 m • Precision surface-ground cross table • All guides hardened and adjustable via gib strip • Quill with feed • Includes counter support and arbor for side & slab milling cutters • Adjustable plain bearing • Central lubrication Nksdjf Nb Hcopfx Abbet • Main switch, motor protection switch, switchable left/right rotation • Feeds on X-Y axes • Z-axis with electric rapid traverse Scope of delivery: ISO 40 collet chuck set with collets, ISO 40 drill chuck adapter, geared drill chuck 1-13 mm, coolant system, 3-axis digital readout system fully assembled.

Stanje: dober (rabljeno), - Hersteller: Waldrich-Siegen - Typ: PF-F-150(1)-530/400 - Maschinennummer: 11.093/0 - Überholt: 2004 (überholte Investition ca. 2,2 Mio. EUR) - Verfahrwege: * X-Achse: 12.000 mm * Y-Achse: 7.300 mm * Z-Achse: 3.000 mm * W-Achse: 4.000 mm - Abstützweite zwischen Ständern: 5.000 mm - Tischbreite: 4.730 mm - Tischnlänge: 12.000 mm - Tischbelastung: 19 t/m (insgesamt ca. 250 t) - Vorschub Tisch: 10.000 mm/min - Vorschub W-Achse: 3.000 mm/min - Vorschub T-Achse: 6.000 mm/min - Verstellweg Fräskopf quer: - Vertikaler Verstellweg Querträger: - Horizontal hydrostatisch gelagerter Frässchieber - Frässpindel Durchmesser: 560 mm - Werkzeugaufnahme Frässpindel: ISO 60 - Vorschub C-Achse: 5.000 mm/min - Fräsmotorleistung: 90 kW - Spindeldrehzahl: 2.500 1/min - Hub Z-Achse: 3.000 mm - Vorschub Z-Achse: 2.000 mm/min - Fräskopf: * Küma Winkelkopf WF2: 90 kW, 450 1/min * Küma Universal UB1D: 60 kW, 2.400 1/min * Küma Festkopf GB1D: 90 kW, 2.400 1/min * Küma Winkelkopf WF1: ? - Elektrischer Anschluss: 3 x 400 V / 50 Hz - Anschlusswert: 600 kVA / 630 A - Kühlmittelkapazität: 4.000 l, Kühlung durch Spindel 20/40 bar Maschine wurde 2004 durch Schiess generalüberholt. Bett-/Tisch-Baugruppe: * Erneuerung der Gleitbeläge * Führungsbahn-Schleifen * Erneuerung Tischantrieb * Direktes Längenmesssystem * Hydrostatisch gelagert Nkedpskwcpbsfx Abbst Portal und Querträger: * Überarbeitung der Verstellspindel – Trapezgewindespindel ersetzt durch Kugelgewindespindel * Direktes Längenmesssystem * Neue Antriebsmotoren für höhere Vorschubgeschwindigkeiten am Fräsständer * Neuer Fräsständer mit hydrostatischen Führungsbahnen Elektrik: * Neuer Schaltschrank * Komplette Neubelegung aller Leitungen * Siemens Sinumerik 840 D in 6 Achsen! Ausstattung / Zubehör: * Neue Raumag Janich-Abdeckungen (komplett) * Neue Doppelspäneförderer (komplett) * Umfangreiches Werkzeugpaket * Umfangreiches Spannmittelpaket - Unter Strom vorführbereit in Europa - Sofort verfügbar - Gesteuerte Achsen: X / Y / Z / W / C / B - Gesamthöhe: 10.475 mm - Gesamtbreite: 11.934 mm - Gesamtlänge: 30.000 mm - Gesamtgewicht: ca. 350.000 kg Bitte beachten: Die oben stehenden Angaben wurden nach bestem Wissen und Gewissen, soweit möglich vom Hersteller, zusammengetragen. Eine Garantie für die Richtigkeit der Angaben kann nicht übernommen werden und sie stellen keine zugesicherte Eigenschaft oder vertragliche Zusicherung dar. Bitte prüfen Sie alle für Sie wichtigen Details!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 22.000 obr/min, Original purchase price of the machine was approx. €1,200,000 TECHNICAL DETAILS Control unit: CNC Fidia C20/6H-SB X-axis travel: 5,000 mm Y-axis travel: 2,500 mm Z-axis travel: 1,500 mm A-axis: ±110° C-axis: 360° (±182.5°) Spindle speed: 22,000 rpm Tool holder: HSK A63 Tool changer: 6-position (pick-up) Milling spindle power: 30 kW Rapid traverse X/Y/Z: 20 m/min Torque A/C-axis: 500 Nm A/C-axis speed: 20 rpm MACHINE DETAILS Power: 90 kW Weight: 65 t EQUIPMENT - Control unit with HPX 20 hand-held device - Coolant/lubricant system - Central lubrication for X, Y, and Z axes - Hydraulic unit HC22DT / 2.61-C5 - Enclosure and monitored loading doors Njdjwzkz Ijpfx Abbokt - 14 used tool holders

Stanje: rabljeno, številka stroja/vozila: YS2P4X2000208xxxx, prevoženi kilometri: 250.000 km, Leto izdelave: 2012, Obrnite se na ATS Norway za več informacij. Prosimo, ob povpraševanju navedite referenčno številko: 21382 Specifikacije: - Model 2012 - EU-odobritev do 17.10.2026 - Prevoženih kilometrov: pribl. 250.000 - Euro 5 - 4x2 - 280 KM Nksdpfjxfgb Nsx Abbot - Medosna razdalja: 430 cm - Zimske pnevmatike (glejte slike) - Nov dvoletni pregled za tiskalnik - Avtomatski menjalnik Radio/DAB - Takoj dobavljivo Opis: Scania P280 4x2 kiper iz leta 2012, ki je pred kratkim pridobil EU homologacijo. Prav tako je bil uspešno opravljen pregled tiskalnika. Vozilo je pripravljen za dobavo. Kilometri: 250000 KM: 280 Tehnični pregled: Da EU-odobreno do: 17.10.2026 Lastna teža: 10940 Skupna masa: 21500 Nosilnost: 10485 Širina: 255 Dolžina: 730 Euro: 5 Model: P280 Menjalnik: Avtomat

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, A used CNC gantry milling machine with a C-axis for turning operations (CNC turning, CNC milling, and angle head machining). Boring mill capabilities! Hirth coupling! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Nksdpfx Abovvh R Dobjt Max. turning height: 1,000 mm Machine: Uniport 6000 Boring mill operations, including CNC turning, CNC milling, and angle head machining. All in a single setup, combined with the speed and precision of a CNC gantry milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max. turning height: 1,000 mm C-axis for turning operations Original price: €1.8 million Disassembly: by arrangement The machine comes with a protective cover to prevent chips from entering the Hirth coupling on the ram during milling operations. Also included are a turning attachment head for turning tools and an angle head for lateral machining on the plate field or rotary table. The angle head can be swiveled in 2.5° increments via the Hirth coupling. All holders (milling, turning, angle head) use HSK-100 clamping. A wireless probe from M&H (Hexagon) for measurement and reference point setting is included. The machine is in operation and can be inspected on site. A video of the machine is available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, A used CNC gantry milling machine with carousel turning unit / C-axis for turning operations Hirth coupling TRAVEL DISTANCES X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Njdovvh T Sopfx Abbjkt Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring mill operations, as well as CNC turning, CNC milling, and angle head machining — all in a single setup, combined with the speed and precision of a CNC gantry mill. C-axis for turning applications Original price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover to prevent chips from entering the Hirth coupling on the ram during milling operations. Includes a turning adapter head for turning tools and an angle head for side machining on the platen field or rotary table. You can index this in 2.5° increments via the Hirth coupling. All tool holders (milling, turning, angle head) use HSK-100 clamping. A radio touch probe from M&H (Hexagon) for measuring and setting the zero point is included with the machine. The machine is in operation and can be inspected on site by prior arrangement. A video of the machine is available.