žerjav sky crane dvoranski žerjav 11750mm

Stahl Portalkran Brückenkran Kran 10to 10000Kg 10t 11750mm + Laufschienen

Leto izdelave: 1970, Stanje: rabljeno, številka stroja/vozila: TH20010142, Demag overhead bridge crane, Kranhimmel crane runway, hall crane Max payload/lifting capacity: 10t - 10,000kg, span 11,750mm External dimension including end carriage approx. 12,000mm Equipped with steel hoist and pendant control Construction height (top edge of crane to hook): approx. 900mm End carriage length with buffer: approx. 3,500mm Hoist lifting height (wire rope): 10,000mm Crane weight: approx. 4,000kg Includes 2x 25m crane runway rails HEB280 and power supply rails! Ffodpev A Rxkofx Aflst Runway girder lengths per side: 1x approx. 10m 1x approx. 15m Support spacing: 10m / 10+5m The crane is dismantled and available immediately ex-location 75053 Gondelsheim Used condition ----- Also available: column-mounted slewing cranes and wall-mounted slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarding possible, please inquire with ZIP code Collection preferred

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Ffodpjtyyn Hsfx Aflst Documentation available. On-site inspection possible.

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM Group 2M Operating voltage 400 V Fsdpfx Asvx E Ncsflsft Control voltage 230 V Flange width 300 mm Immediately available from stock

Stanje: rabljeno, Leto izdelave: 1988, x-travel 600 mm y-travel 450 mm z-travel 450 mm Quill stroke 80 mm Table size 1000 x 400 mm Spindle speeds 20 - 3000 rpm Spindle taper SK 40 Feeds – automatic programming 1 - 4000 mm/min Fodpfxeu Rt I Io Afljft Rapid traverse 6 m/min Control Philips 432 Drive power 12 kW Total connected load 15 kW CNC control Philips 432, swiveling vertical head, coolant pump, hydraulic tool clamping, automatic central lubrication, machine lamp, chip collecting tray with spray protection enclosure.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. Fsdpfsfg E Hpjx Afloft - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Leto izdelave: 1992, Stanje: zelo dobro (rabljeno), Rabljena hidravlična stiskalnica tipa H, 700 ton, naprodaj Proizvajalec: Muller Kapaciteta (ton): 700 Fedpehcfzksfx Afloft Število batov: 2 Mere mize (x-y/mm): 4000×2200 Mere drsnika (x-y/mm): 4000×2200 Hod (mm): 1400 Svetla višina v zgornjem položaju (mm): 1920 Moč nasprotnega pritiska (tona): 400 Hod nasprotnega pritiska (mm): 500

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Ffodeu Nc Emjpfx Afljt Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Stanje: rabljeno, Leto izdelave: 2018, DEMAG mostno dvigalo – Nosilnost 16 ton – Letnik 2018 Fodpfsxb D Nvox Aflsft Proizvajalec DEMAG Cranes & Components GmbH – Nemčija Tip Industrijsko motorizirano mostno dvigalo – enojni ali dvojni nosilec Industrijska uporaba Za težka dviganja v jeklarnah, proizvodnih delavnicah, kotlarstvih, splošni strojni obdelavi in logističnih skladiščih Glavne tehnične specifikacije: - Nazivna nosilnost: 16 ton (16.000 kg) - Leto izdelave: 2018 - Proizvajalec: DEMAG – globalni vodilni v industrijskem dviganju - Motorizirano premikanje po tirnicah - Električni vitel z jeklenico (DEMAG standard, velika nosilnost) - Napajanje: industrijski trifazni tok - Upravljanje: obesek ali radijsko daljinsko upravljanje (odvisno od konfiguracije) - Stanje: rabljeno – nedavno, robustna zasnova 🧩 Uporaba stroja DEMAG mostno dvigalo z nosilnostjo 16T je zasnovano za težka dviganja v zahtevnih industrijskih okoljih. Velika nosilnost ter sodobna konstrukcija zagotavljata učinkovitost, varnost in dolgo življenjsko dobo. ⚙️ Značilnosti / prednosti - Srednje visoka nosilnost (16T) za težje industrijske procese - Sodobna izdelava (2018) skladna z aktualnimi varnostnimi standardi - Vgrajeni DEMAG vitel in električni sistemi - Možnost integracije avtomatizacije in daljinskega upravljanja

Leto izdelave: 1990, Stanje: skoraj kot novo (rabljeno), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2.75-0.85 H-Rahmen Hydraulikpresse Presskraft: 500 Tonnen Tischmaße (X-Y/mm): 3000×1800 Stößelmaße (X-Y/mm): 3000×1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Ffodpfx Afohcnxrjlot Neue Hydraulikpressen ebenfalls verfügbar

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) Ffedjd Iipmjpfx Aflot • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens