Notranji žerjav ± 14.170 mm x 25.000 kg

Demag ZKKE

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, številka stroja/vozila: 1099883, obratovalne ure: 100 h, Demag par glavnih nosilcev Glavni nosilec DRS315 Dvižna naprava EZ DR20 Tirnica vozička: 2240 mm Vrvni razteg 4/1 Žerjav skoraj nima obrabe, zelo malo uporabljen v strojni tovarni. Demontiran julija 2025 in suho skladiščen. Popolnoma z dokumentacijo in daljinskim upravljanjem HBC Spectrum. Vsa gibanja z frekvenčnim pretvornikom! Prilagoditve je mogoče ponuditi ločeno. Ncsdpfxjw H S Avs Abbsl

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m Nodpfxofg E Hps Abbscl The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Leto izdelave: 1998, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12254 B521 860, overhead crane ± 10,500 mm x 12,500 kg Ncjdpfsv Ip Egox Abbjl

Leto izdelave: 1998, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13354 B521 850, bridge crane ±10,500 mm x 12,500 kg Ncodpfx Abov Ip Disbjl

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), With articulated carrier DC26, power output: 108 kW, maximum travel speed: 16 km/h, tire size: 14.00 R24 A, 2 x drill booms BUT 35, Deutz BF4M 1013C diesel generator set, BMH 6414 drill carriages, maximum drill rod length: 4,321 mm, maximum drilling depth: 4,020 mm, HL 210 loading platform, CE compliant, air/water flushing, heat exchanger and Swellex high-pressure pump, supplied without drifters (drill hammers). Ncjdpfel Tn Epjx Abbol

Leto izdelave: 1998, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12157 B51 864, bridge crane ± 10,500 mm x 16,000 kg Nedpfxov Ip E Hs Abbscl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 6.410 kg, skupna dolžina: 19.250 mm, nosilnost: 10.000 kg, glavna hitrost dviga: 800.000 mm/min, Oprema: dokumentacija / priročnik, Mostovno dvigalo Proizvajalec: ABUS Tip: ELK Nodsx I Aapepfx Abbscl Razpon: 19.250 mm Nosilnost: 10.000 kg Upravljanje možno preko HBC radijskega daljinskega upravljalnika in visečega komandnega stikala Popolna dokumentacija priložena CE

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Ncsdpjv Szwcefx Abbjl Power rating: 630 kVA Primary voltage: 20 kV Secondary voltage: 400 V Frequency: 50 Hz Voltage: 400 V / Hz Rated current: 18.2 / 24.2 A Weight: 2.6 t per unit Dimensions (L x W x H): 1.7 x 0.82 x 1.66 m DRY-TYPE TRANSFORMER – on U-profile base frame Two transformers available for sale. Both include an enclosure (currently disassembled, see photo). No. 1 No. 2

Leto izdelave: 1990, Stanje: skoraj kot novo (rabljeno), Gebrauchte Schuler Hydraulikpresse zu verkaufen Hersteller: Schuler Modell: Schuler EB 2-500-2.75-0.85 H-Rahmen Hydraulikpresse Presskraft: 500 Tonnen Tischmaße (X-Y/mm): 3000×1800 Nedpfx Abehcnxrjbjcl Stößelmaße (X-Y/mm): 3000×1800 Hub (X/mm): 850 Hübe pro Minute: 12 bis 24 Steuerung: Siemens S7 Neue Hydraulikpressen ebenfalls verfügbar

Stanje: novo, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650x450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL PRICE!!! 2-Column Double Mitre Band Saw K-tech DG 62/45 HA-I • 2-column mitre saw • Robust yet easy to operate Ncedpod Iipmefx Abbjl • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed control, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning/disinfection) • Energy-efficient and low-vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled blade drive 15-100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Oversized drive wheels (520 mm each) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material, or commence series cutting 4. Switch off saw blade 5. Raise frame just above the material 6. Vise opens