Ddr Glodalica nakup rabljenega (108)

Stanje: rabljeno, Technical details: Band width: 80 mm Sheet thickness: 1.5 mm Number of rollers: 5 Total power requirement: 1.2 kW Approx. machine weight: 150 kg Space requirements (LxWxH): approx. 1.1 x 0.7 x 1.4 m Leveling rollers: Cpsdpfsu Ic E Rex Afxsu - 2 upper rollers, 3 lower rollers - Material feed via two pneumatically controlled rollers - Pneumatic connections not installed in working condition.

Leto izdelave: 1977, Stanje: dober (rabljeno), 2 units of DDR emergency power generators Engine manufacturer: VEB SKL Magdeburg DDR Type: 8NVD26 A2 Year of manufacture: 1977 Continuous output: 294 kW Maximum output: 323 kW Displacement: 52.96 liters Compression ratio: 14 Speed: 750 rpm Specific fuel consumption: 224 g/kWh Fuel consumption over 8 hours: 640 liters Boost pressure ratio: 1.38 Charge air temperature after turbocharger: 60°C Generator: Manufacturer: VEM Dessau Codpeigyt Hsfx Afxepu Type: SSED 509-8a Voltage: 400 Volt Electrical output: 330 kVA Power factor (cos φ): 0.8 Dimensions: Length 4270 mm, width 1516 mm, height 2030 mm Total weight approx. 8,500 kg per unit !! Further information by phone only !!!

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC bed milling machine, manufacturer IBERIMEX-MVR Type: UH-1250, Year of manufacture: 2001 Cjdpfx Aod Eransfxopu Control: Heidenhain TNC124 Travel distances: X 1250 mm, Y 500 mm, Z 460 mm Clamping table: 360 mm x 1800 mm Spindle taper: ISO50 Machine with complete enclosure. For further technical details, please refer to the machine data sheet. Machine is in good condition.

Leto izdelave: 1997, Stanje: rabljeno, številka stroja/vozila: B-388, FIL FA 160 bed-type milling machine with HEIDENHAIN TNC-360 control Cpedpjgcuzrofx Afxou

Stanje: zelo dobro (rabljeno), For sale: DDR motor pump. Codpjv Nrf Esfx Afxspu - 800 l/min - 28 HP - In very good condition.

Stanje: rabljeno, Leto izdelave: 1997, Krmiljenje Heidenhain 355 Cpodpfxsd N Smhs Afxeu X-hod 850 mm Y-hod 550 mm Z-hod 450 mm Vpenjalo orodja SK50 Teža stroja cca 5,5 t +++++ Upoštevajte, da je stroj v razstavljenem in za nakladanje pripravljenem stanju. Zaradi tega demonstracija pod napetostjo ali izdelava videa nista možni. Naš oglas vsebuje najbolj reprezentativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Leto izdelave: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm Clamping table surface 2200 x 750 mm Table load capacity 3 t Number of T-slots 6 T-slot width 18 mm T-slot spacing 120 mm Spindle taper ISO 50 DIN 69871-B Max. spindle speed 3000 rpm Gear stages 1 Infinitely variable speed range 1: 60 - 3000 rpm Machine weight approx. 21.6 t Feeds - longitudinal/cross/vertical: 0 - 5000 mm/min Rapid traverse: 15,000 mm/min Total power requirement: 38 kW Machine weight approx. 11 t Drawbar according to DIN 69872-B | ICS Operating hours: Control on: 43,036 h Machine on: 41,311 h Program run: 13,894 h Machine has already been dismantled. Codpfxeg E Utxj Afxepu

Stanje: rabljeno, Wema Probst profile milling machine Codpfx Afsc N N U Njxspu Main motor: 11 kW Dismantled and ready for loading

Leto izdelave: 1991, Stanje: dober (rabljeno), Hermle UWF 802 M universal tool milling machine with Hermle HS path control system. The machine is in good, operational condition and can be demonstrated under power. Cpjdpjdubmkefx Afxju

Leto izdelave: 1980, Stanje: dober (rabljeno), Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Cpedpfxsd Id N Rj Afxju

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Mikron WF2S universal milling machine with 3-axis Elesta-Visulesta digital readout. Fixed angle table, SK 40 spindle taper. Machine is in very good, ready-to-operate condition, from a research institute. Can be demonstrated under power by prior arrangement. Cpsdpjg Nw Rzefx Afxju

Stanje: novo, The machine is supplied without a base. The BF3 Deluxe base is available separately under item number 56-1017. Cedev N Uyrepfx Afxspu Technical data: Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. face mill cutter: 80 mm Throat: 220 mm Spindle speed: (12) 75 - 3200 rpm Spindle taper: MT4 Quill travel: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 800 x 240 mm Travel (x / y): 555 x 205 mm Milling head swivels: -60° to +60° Spindle to table distance: 95 - 485 mm Milling head vertical adjustment: 390 mm T-slot size: 14 mm Power feed motor: 90 W Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions: 1140 x 970 x 1460 mm Weight approx.: 322 kg Scope of delivery: - 3-axis digital display ES-12 V with LCD display - Quick-action drill chuck 3 – 16 mm / B 16 - Drill chuck arbor MT4 / B 16 - Drawbar M 16 - Reducing sleeve MT4 / 3 - Combination shell end mill arbor MT4 / 27 mm - Height-adjustable safety guard - Automatic quill feed - Power feed motor for milling head - LED machine lamp - Digital quill travel display - Thread cutting device - Laminated protective cover - Longitudinal measuring scale - Operating tools Base not included

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Cpjdpfx Afscxxq Dexju Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1980, X-travel: 1,600 mm Cpedpfxscxxrns Afxsu y-travel: 800 mm z-travel: 630 mm Spindle taper: SK 50 Feed rate: 10–6,000 mm/min Rapid traverse: 6 m/min Stepless speed range: 20–2,000 rpm Max. table load: 5,000 kg Electrical cabinet dimensions: 1,800 x 530 x 2,000 mm Total power requirement: 18 kW Machine weight approx.: 11 t Required space approx.: 4.6 x 2.9 x 2.62 m Universal bed milling machine with 4-axis PHILIPS NC 6664 control, including program memory, additional NC-controlled rotary table, diameter 630 mm, hydraulic tool clamping, coolant system, chip conveyor, horizontal and vertical milling spindle (SK 50), separate control cabinet, emergency stop safety feature.

Stanje: rabljeno, številka stroja/vozila: 28670, x-travel: approx. 400 mm y-travel: 150 mm z-travel: 340 mm Clamping surface: 600 x 210 mm Cedpfx Aecxxlijfxjpu T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed range - vertical: 60 - 1200 rpm Speed range - horizontal: 95 - 1900 rpm Spindle speed steps: 12 Feed range: 10 - 500 mm/min Feed steps: 10 Spindle taper: MK 4 Quill stroke vertical: 60 mm Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Required space approx.: 0.9 x 1.05 x 1.55 m

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 2204 - 0469, x-travel: 580 mm y-travel: 400 mm z-travel: 450 (390*) mm Table size: 460 x 800 mm Spindle speed range: 40 - 4000 rpm Cpodpfscxxwajx Afxju Feed range: 2 - 3600 mm/min Rapid traverse: 4.0 m/min Spindle taper: SK 40 Space requirement approx.: 3.0 x 2.10 x 2.10 m Spindle drive: 4.0 kW Control: Contour 2 CNC-controlled universal milling machine with Contour 2 control, swiveling vertical head +/- 90° with 80 mm quill stroke, horizontal spindle, automatic feeds and rapid traverse in 3 axes, hydraulic tool clamping, pendant control panel, electronic handwheel, automatic central lubrication, coolant system, emergency stop, chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 31268, X-axis travel: 850 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Quill stroke: 115 mm Cpedpfjcxxwgox Afxeu Table surface: 900 x 700 mm Spindle speeds: 30–6000 rpm Spindle taper: SK 50 Control: Sinumerik 3 M Feed rate: 0–6000 mm/min Spindle drive motor: 7.5 kW Total connected load: 32 kW Machine weight approx.: 6.6 t Space requirements approx.: 3.8 x 1.8 x 2.9 m Universal milling machine with Sinumerik 3 M control, swiveling table – adjustable in 3 axes +/-30°, tiltable +/-30°, rotatable +/-45°. Milling head swiveling in 2 axes. Separate electrical cabinet, coolant system, automatic central lubrication, work light, emergency stop safety function.

Stanje: rabljeno, številka stroja/vozila: 2880, x-axis travel: 290 mm y-axis travel: 120 mm z-axis travel: 350 mm Table clamping surface: 690 x 175 mm Spindle taper: SK40 Number of spindle speeds: 17 Feed range: 42 - 680 mm/min Csdpscxxntsfx Afxepu Number of feed rates: 14 Spindle speed range: 50 - 2240 rpm Approx. machine weight: 0.6 t Universal tool milling machine with swiveling vertical head +/- 90°, double-pole switchable spindle drive with clockwise and counter-clockwise rotation. The machine is equipped with handwheels on all 3 axes, rapid traverse via crank handle in the x-direction, electric feed in x-direction, feed rates adjustable via change gears, overhead arm for horizontal milling, three-position cam switch in x-direction for automated processes, emergency stop in the control panel, and main switch for safety.

Stanje: rabljeno, Leto izdelave: 1986, številka stroja/vozila: 2204-0929, x-travel: 560 mm y-travel: 500 mm z-travel: 450 / 390 mm Quill stroke: 80 mm Feed rate: 2 - 3600 mm/min Table clamping area: 800 x 460 mm Spindle speeds: 40 - 4000 rpm Cpedpfx Ajcxxriefxsu Spindle taper ISO: ST40 Swivel head left and right: +/- 90° Control: Contour 2 Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Space required approx.: 2.0 x 2.5 x 2.2 m CNC-controlled universal milling machine with Contour 2 control system, vertical head swivels +/- 90° with 80 mm quill stroke, horizontal spindle, feeds and rapid traverses on 3 axes, hydraulic tool clamping, pendant control panel, machine lighting, automatic central lubrication, coolant device, emergency stop, chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 2819-0517, x-axis travel: 300 mm y-axis travel: 300 mm z-axis travel: 400 mm (340 mm with apron) Clamping surface: 390 x 620 mm / chip tray Spindle speed: 40–2500 rpm Feed range: 0.2–3600 mm/min Rapid traverse: 4.0 m/min Control: Contour 3 – 3D Path Control System Spindle taper: SK40 Quill stroke: 60 mm Swiveling head +/-: 90° Spindle drive motor: 2.0 kW Total power requirement: 1.6 / 2.0 kW Machine weight approx.: 1.3 t Space requirement approx.: 1.8 x 1.8 x 1.8 m Codpfscxxp Tjx Afxepu Universal milling machines from Deckel have proven themselves for decades in mold, tool, and machine construction. CNC-controlled tool milling machine with Contour 3 control, vertical head swivels +/- 90° with 60 mm quill stroke, horizontal spindle, feeds and rapid traverse on 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop button, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 52326/08, x-travel: 250 mm y-travel: 150 mm z-travel: 305 mm Table clamping area: 600 x 210 mm Spindle speed range: 40 - 2000 rpm Number of spindle speeds: 16 Spindle taper: SK 40 Feed rate: 10 - 500 mm/min Cpodpfxjcxxrve Afxou Number of feed rates: 16 Vertical head swivels: +/- 90 degrees Total power requirement: 1.0 / 1.4 kW Machine weight approx.: 0.8 t Space requirement approx.: 1.0 x 1.25 x 0.85 m Universal Tool Milling Machine Type Deckel FP1 featuring: - Swiveling vertical spindle - Vertical head swiveling +/- 90° - Spindle taper SK40 - Automatic feeds - Pole-changing motor - Separate electrical cabinet with main switch.

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 0153, x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm Spindle speed: 40 - 2000 rpm Table: 750 x 320 mm Quill stroke: 60 mm Jaw width: 160 mm Feed range: 10 - 500 mm/min Spindle taper: SK 40 Machine weight approx.: 2 t Codpfx Afocxxvqoxspu Space requirement approx.: 1.22 x 1.81 x 1.71 m Universal tool milling machine with 3-axis RSF-Electronic Z503 digital readout, vertical head swivels +/- 90°, powered feeds on all 3 axes, quill (60 mm), switchable spindle brake, coolant system, drilling feed rates 0.03; 0.12; 0.06 mm/rev, machine lamp, angle table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders, etc.).

Stanje: rabljeno, x-travel: 600 mm y-travel: 400 mm z-travel: 640 mm Spindle speed: 30 - 1800 rpm Table size: 880 x 495 mm Total power requirement: 4 kW Cpedpocxxx Tofx Afxju Machine weight approx.: 2 t Space requirement approx.: 2.2 x 1.8 x 2.1 m Equipped with machine lamp and lubrication system, swivelling vertical milling head +/- 90°, collection tray

Stanje: rabljeno, številka stroja/vozila: 0736, x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm Work table: 1000 x 440 mm Spindle speeds: 40 - 2000 RPM Number of speed steps: 18 Feed range: 10-500 mm/min Cjdpecxxyhsfx Afxjpu Number of feed steps: 18 Rapid traverse: 1.50 m/min Spindle taper: SK40 Total power requirement: 2.2 kW Machine weight approx.: 2 t Space requirement approx.: 1.57 x 1.68 x 1.85 m Universal tool milling machine in traveling column design, suitable for particularly heavy and large workpieces. Equipped with a swiveling vertical head and quill (stroke 85 mm), horizontal spindle with quill (stroke 120 mm), inclined bed with fixed, precise angle table, automatic feeds on 3 axes, chip tray, coolant pump and system, separate control cabinet. The machine is in good condition.

Stanje: rabljeno, številka stroja/vozila: 2801-0234, X-travel: 300 mm y-travel: 220 mm z-travel: 400 mm Cedscxxm Espfx Afxspu Clamping surface: 620 x 390 mm Spindle speed: 31 - 3150 rpm Feed range: 1 - 3600 mm/min Rapid traverse: 4000 mm/min Spindle taper: SK 40 Head swivels +/- 90° Quill stroke: 60 mm Total connected load: 1.09 / 2.0 / 4.0 kW Machine weight approx.: 1.3 t Space requirement approx.: 1.3 x 1.1 x 1.6 m CNC-controlled universal milling machine with Dialog 4 control, vertical head swivels +/- 90° with quill stroke 60mm, horizontal spindle, feeds and rapid traverse in 3 axes, hydraulic tool clamping, automatic central lubrication, coolant system, emergency stop, chip guard enclosure with chip tray, separate control cabinet. The machine is in good condition.