Orodje soba glodalica - Universal

WAGNER FCW 600

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Hnodpfx Afsgf H Saj Teg Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Hodpjfgyicofx Af Tsng Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: rabljeno, Technical Details: Ram stroke - max.: 250 mm Workpiece diameter - max.: 80 mm Max. workpiece length: 900 mm Total power requirement: 1.5 kW Hsdpfxsw Au I Ij Af Tong Machine weight approx.: 2.1 t Various accessories

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Technical Data: Hnodpfx Afeummw To Tog Maximum cutting width: 3100 mm Maximum cutting capacity with St40 steel: 15.0 mm Motorized adjustable back gauge: 1500 mm Motorized adjustable cutting gap Adjustable cutting angle Working height: 860 mm Motor power: 22 kW Side safety guard with rear light barrier Dimensions (L x W x H): approx. 4650 x 3600 x 2050 mm Weight: approx. 13.5 t We are only able to display a small selection of our current range of used machines here. Please also visit our homepage! The seller accepts no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Leto izdelave: 1985, Stanje: pripravljen za uporabo (rabljen), Table dimensions: 1435x460 mm, Number/Width/Spacing: 5/16/80 mm, Control: TNCi-120, Length: 1435 mm, Width: 2330 mm, Height: 1648 mm, Weight: 3.1 t, comes with documentation, accessories available, no known defects, on-site inspection possible. Hsdolbmupjpfx Af Tong

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2025, Oprema: ABS, * DOLL panther running gear + 5-year warranty * DOLL tronic operating and control system including radio remote control * Hydraulically detachable gooseneck * Reinforced chassis platform * Rear ramps * Outboard main frame * Hydraulic steering * Comprehensive load securing package * Low-bed length: 11,750mm (6,100mm + 5,650mm) or 12,400mm (6,700mm + 5,700mm) * Unladen weight: 13,700kg (+/- 2%) * Optional comprehensive equipment This trailer is available with a low-bed length of 6,700mm or 6,100mm and with short delivery times. Images may differ from the original. All information subject to change and without guarantee. Hodpfegvr T Hsx Af Teng Contact: Tel.:

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-230 Item No. 05.833/00 Year of Manufacture: 1969 Trough Diameter: 1,100 mm Total Trough Height (external): approx. 650 mm Processing Tank / Gross Volume: max. 230 liters Usable Volume: approx. 115 liters Rotational Speed: 1,100 to 1,800 rpm, infinitely variable Motor Power: 7.5 kW Mains Connection: 400 Volt, 50 Hz - Operating time can be set manually or via timer - Infinitely variable motor speed via variator gearbox - Manually adjustable eccentric imbalance weights - Tank with polyurethane lining (lining partially damaged or worn) - Soundproofed cover - Manual separation flap Hnodpfxefqpxij Af Tsg - Integrated screen separation device after the separation flap - Liquid connection - Material discharge opening: 180 x 150 mm - Control cabinet for wall mounting - Baffle cover with perforated screen Space requirement with base (L x W x H): 1,800 x 1,750 x 1,700 mm Net weight: approx. 1,800 kg Good condition Function description: Workpieces and media are set in motion by the induced vibration and are tumbled very gently. The continuous relative movement between the workpieces and the media results in the deburring and surface finishing of the workpieces.

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Motor (400 V): 1.1 kW, Hodpfsu R S Hpsx Af Teng Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new display machine -

Stanje: zelo dobro (rabljeno), The SB-10 grinding machine enables flawless grinding of boring bars, thread-cutting tools, parting-off tools, or boring bar steels made of HSS or carbide for jig boring machines or lathes. By selecting the correct rake angle to suit the respective material, you achieve optimum utilization and a longer service life of the tools. These boring bars are still mostly ground by hand today and are subsequently used on high-quality machine tools. On the SB-10, the steels are ground using a profiled grinding wheel at the circumference. The desired profile is achieved effortlessly with a dressing diamond and the template mounted on the machine. For excellent stability and surface quality, the horizontal carriage is mounted on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal adjustment: 130 mm Transverse adjustment: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions (W x D x H): approx. 550 x 450 x 650 mm Weight: approx. 70 kg Hnodpfx Ajfqicxof Tsg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 9.080 h, Funkcionalnost: popolnoma funkcionalen, For sale: Well-maintained CNC Turning and Milling Center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel Paths: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and Accessories: Hnjdpfx Asxzqhrof Tjg - Turret: 12 positions, all driven - Driven tool speed: max. 10,000 rpm - Parts catcher - Power supply: 400 V - Power consumption: 37.6 KVA - Internal coolant system - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manual measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Includes tooling: 8 fixed tools, 3 driven tools - Incl. extraction unit, manufacturer: Indusa - Complete documentation included Machine available immediately! The machine has been fully cleaned and inspected! Loading handled by us! Transport can be organized upon request!