CNC posteljo tipa glodalica

IBERIMEX-MVR UH-1250

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R Nkjdpfstzdyzex Ag Tsu We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 1.500 mm, Heidenhain 530 Diagonalna rezkalna glava z indeksacijo 2,5° x 2,5° Nksdpfx Agsx I A Hvs Tju Število vrtljajev do 6.000 min⁻¹ Orodno vpenjalo SK50 Notranje hlajenje 36 bar Transporter za ostružke v vzdolžni smeri + prečni transporter

Stanje: rabljeno, Leto izdelave: 1999, x-travel 2000 mm Nksdpfxjv H Erts Ag Tju y-travel 800 mm z-travel 850 mm Control HEIDENHAIN TNC 360 Total power requirement / kW Machine weight approx. / t Space requirement approx. / m

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Nkjdpfxjvy Ihds Ag Tou Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 5-osni rezkalni stroj Jobs. Tip jomach 143. CNC Fidia. Leto 1994. X4000 Y2700 Z1250. A 190. C neprekinjena. B. W. Cena 85.000 €. Nksdpfx Agjxr I Scs Tju

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 5.991 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11415584024, For sale is a 5-axis CNC machining center DMG MORI DMU 50, year of manufacture 2012, equipped with a Siemens control system. The machine is in good, well-maintained condition and was in operation until recently. An on-site inspection under power is possible by appointment at any time. The DMU 50 is a vertical machining center with an integrated NC rotary/swivel table, making it ideal for precise 5-axis complete machining of complex workpieces. Typical applications include tool and mold making, manufacturing of precision components, as well as prototypes and small to medium production runs. Technical data (extract): Manufacturer: DMG MORI / Deckel Maho Model: DMU 50 Machine type: Vertical 5-axis CNC machining center Year of manufacture: 2012 Control system: Siemens Number of axes: 5 simultaneous X travel: approx. 500 mm Y travel: approx. 450 mm Z travel: approx. 400 mm Spindle: Vertical motor spindle, up to approx. 14,000 rpm Tool changer: automatic, approx. 30 tool stations Country of origin: Germany Worktable Simultaneous-capable rotary tilt table Control 3D control Siemens 840D solutionline Main drive Spindle speed up to 14,000 rpm SK40 Tool magazine Tool magazine 60 stations, SK40 vertical chain Nkodpfex S D N Tjx Ag Tju Automation / Measuring / Monitoring Infrared probe TS649 DMG Direct measuring systems X/Y/Z Cooling / Chip removal Coolant-air switch-over Rinsing gun for chip cleaning Siemens Control Options Electronic handwheel General Options Mode 4 operation Second cabin door Special constructions Rotating viewing window (S-K3008) Operating hours (according to meter): Machine hours: approx. 31,987 h Spindle hours: approx. 10,489 h Condition & Scope of delivery: Used, fully functional, regularly in operation. Scope of delivery includes the machine as shown, further accessories by arrangement. Miscellaneous: Location: Birkenfeld (75217)

Stanje: zelo dobro (rabljeno), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Nsdpfx Aowgizdog Tjku Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight: approx. 12.5 t Space requirement: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by specialist company. The existing milling head has been replaced by an overhauled universal milling head. Equipment: Differential for angled machining Automatic indexing device (interchangeable index plates!) for splined and multi-start components; also extensive set of bushings, support rollers and around 70 change gears. Conversion of milling head speed control to frequency inverter with corresponding high-performance motor is a great advantage and saves much setup time. Accessories: Around 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller supports, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Stanje: rabljeno, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position controller - Backgauge adjustment via ball screw spindles Njdpfx Agjd Hxx Aj Teku - SICK light curtain safety system at the front for intervention protection - 3 support arms with ball rollers for material support - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine, extremely stable construction Space requirements (main machine) L x W x H: 4650 x 2610 x 3200 mm Weight (main machine): 27,000 kg Space required for transport (main machine) L x W x H: 4650 x 2610 x 3200 mm Transport space (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, trial cuts possible. Currently, the hold-downs are being newly sealed; the corresponding price adjustment will be made in the next few days.

Stanje: rabljeno, Leto izdelave: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Letnik: julij 2011 Velikost palete: 500 x 500 mm Nsdpfev Tvh Ssx Ag Teku Pomiki: - X: 730 mm - Y: 730 mm - Z: 740 mm Hitrost vretena: 12.000 vrt/min Izmenjevalec orodij: 40 pozicij Transporter ostružkov: kromiran

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Nedpfx Agsvx Uvfo Teku Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).