Posteljo tipa glodalica

FIL FA 160

Stanje: dober (rabljeno), Spindle diameter: 80 mm Nwodpfx Agjphl Ecexof Spindle taper: SK50 Spindle speeds: 11 - 1000 rpm X-axis travel: 1700 mm Y-axis travel: 1800 mm Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Machine weight: 10 tons

Stanje: rabljeno, Leto izdelave: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speed: 3,000 rpm Control: Heidenhain iTNC430 Milling head: 2 axes, indexed 2.5° Vertical (Y axis): 3,600 mm Cross (Z axis): 1,500 mm Longitudinal (X axis): 12,000 mm Guideway length: 14,700 mm Nwodpfx Agoxwdygsxef Guideway width: 1,400 mm Lowest milling position of spindle nose (measured from floor, head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7; 231; 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse: X axis: 12,000 mm/min Z/Y axis: 15,000 mm/min Feed motor torque: X axis: 55 Nm Z axis: 37 Nm Y axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to machine: 300 L/min at 4.5 bar NOTE: Clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 25.05.004, skupna dolžina: 9.500 mm, skupna širina: 2.250 mm, skupna višina: 2.300 mm, vhodna napetost: 380 V, moč: 50 kW (67,98 KM), skupna masa: 21.000 kg, lastna masa: 18.000 kg, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, Paper size 730 x 1060 mm and printing area 710 x 1040 mm Paper thickness 0.05 mm - 0.5 mm Set maximum speed (due to simulating sheet travel times of high-speed presses) is 4,000 per hour, but the machine can run much faster for commercial jobs. Four-cylinder central impression drum which completes all four print units in a single gripper closure. 1988 FAG Speedproof with control console for ink fountains and cylinder adjustment, ensuring extremely precise register printing. Attached is an original factory brochure. Fully dry ice cleaned, and the cylinders are in very good condition. This machine is offered strictly on an “as is” basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is strictly fixed and based on the removal of parts that we could otherwise sell separately, such as: - The Mabeg feeder with vacuum belt infeed; - The four-section Baldwin stainless steel unit, providing each color with its own basin, a mixer, and adjustable temperature—meaning each basin can be set to a different temperature and alcohol content. We have dry ice cleaned the machine. The original intent was to use it prominently for printing electronic paper, but due to excessive startup losses, the project was discontinued. The machine has been with us for three years now, and due to its size I want it sold quickly. Hence, this very low price—it's an excellent machine. If the machine needs to be set up for testing and trial runs, this is possible at an additional cost of €10,000, of which €5,000 must be paid upfront as a deposit under specific conditions. All relevant information can be found in the original FAG brochure available as a PDF via this advertisement. Nodpjuf Sy Aefx Agxswf Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lb) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Stanje: rabljeno, Leto izdelave: 1984, x-travel 2500 mm y-travel 750 mm Nwjdpfstqqnwox Agxsf z-travel 1000 mm Table clamping surface 2550 x 800 mm Spindle taper SK 50 Control HEIDENHAIN, TNC 150 B Machine weight approx. 16 t

Stanje: rabljeno, Leto izdelave: 1985, x-axis travel: 485 mm y-axis travel: 385 mm z-axis travel: 380 mm Table clamping surface: 800 x 460 mm Spindle taper: SK 40 Control: CONTOUR 1 Spindle speeds: 50 - 2500 rpm Feeds: 10 - 1000 mm/min Rapid traverse: 2 m/min Table load capacity: 600 kg Quill stroke: 80 mm Total power requirement: 7.5 kW Nwsdpfxjtqqllj Agxef Machine weight approx. 2.0 t Dimensions L x W x H: 2.4 x 1.7 x 1.98 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system - X/Y/Z axes can also be operated via handwheels -

Stanje: novo, Jaškovna peč, proizvajalec VEI Tip: SCO_EB koristna višina: 1200 mm koristni premer: 1400 mm zunanji premer: 2200 mm zunanja višina (brez pokrova): 1650 mm zunanja višina (z vklj. pokrovom): 2600 mm Njdpfjg R Snhsx Agxowf električno ogrevana: 64,5 kW cirkulator: 5,5 kW trofazni priključek: 400 V, 50 Hz temperatura: max. 750°C

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D20E/7694, Ponudbena številka: D20E/7694 Vrsta stroja: Večstopenjski suhi stroj za vlečenje žice Proizvajalec: SKET / MILL Nwjdpfxjwi S Ixj Agxof Tip: 8 BLOKOV Leto izdelave: Vhodni premer: 6,5 mm Končni premer: 1,6 mm Število vlečnih stopenj: 8 Premer kolutov: 550 mm in 650 mm Hitrost - m/s: 8-12 Lokacija: V Evropi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A04B-0105-B133#BBH, potovalna razdalja osi X: 700 mm, pomik osi Y: 400 mm, pomik po osi Z: 330 mm, hitro pomikanje X-os: 54 m/min, hitri pomik os Y: 54 m/min, hitri pomik na osi Z: 54 m/min, širina mize: 850 mm, dolžina mize: 410 mm, obremenitev mize: 300 kg, skupna masa: 2.200 kg, največja hitrost vretena: 10.000 obr/min, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: 2x FANUC Robodrill α-D21MiB5 Plus – ready for immediate use We are offering two FANUC Robodrill α-D21MiB5 Plus machining centers in excellent condition. These machines combine high speed, precision, and reliability, making them ideal for both series production and flexible machining tasks. Nwsdjxwiglopfx Agxjf Both units have seen limited use, have been professionally maintained, and come equipped with valuable options that are normally available only at extra cost. Highlights & Equipment: - Year of manufacture: 03-2022 and 06-2022 - Large chip conveyor - High-pressure through-spindle coolant pump - Extraction unit - Dataserver via FTP - Fanuc Program Transfer Tool (software) - All tool holders as shown in the pictures - Manuals included - Always serviced by Humacs Krabbendam - Low operating hours These Robodrills are immediately operational and offer an excellent opportunity to invest in young machines with extensive options, without the lead time associated with new orders. The listed price is per machine. Interested? Please feel free to contact us for more information, specifications, or to arrange a viewing.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 11.574 h, potovalna razdalja osi X: 1.525 mm, pomik osi Y: 762 mm, pomik po osi Z: 625 mm, skupna višina: 3.235 mm, skupna masa: 13.500 kg, največja dolžina izdelka: 5.000 mm, Ta 3-osni vertikalni obdelovalni center DOOSAN MYNX 7500 II je bil izdelan leta 2020 in je opremljen z upravljalnikom Heidenhain TNC 620 ter merilno sondo TS 460. Velikost mize je 1600 mm x 750 mm, maksimalna hitrost vretena pa je 12.000 vrt/min. Z merami 5000 × 4050 × 3235 mm in maso 13.500 kg je to odlična priložnost za nakup vertikalnega obdelovalnega centra DOOSAN MYNX 7500 II. Za več informacij nas kontaktirajte. • Dolžina mize: 1600 mm • Širina mize: 750 mm • Vretenasti konus: ISO 40 dvojni kontakt • Največja hitrost vretena: 12.000 vrt/min Nsdpsx U Dtwjfx Agxowf Dimenzije Globina stroja: 4050 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Machining center Manufacturer: KNUTH Model: EcoMill 350 CNC Nedpfx Ajtiauhjgxswf