Peči Za Prašno Lakiranje nakup rabljenega (84.660)

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Hnsdpfx Aofz A Ilodkei Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk. Hnodpfxefzktze Adkei

Leto izdelave: 2020, stanje: novo, Transport systems Hedpfsfz Dt Njx Adkoni Depending on customer requirements, transport systems can either be operated on the floor or suspended from rails. - For convenient solutions in manual systems, we recommend overhead cross-transfer systems (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These operate continuously and present an excellent solution for companies focused on process quality and repeatability. - For companies producing various items simultaneously or operating multiple booths with different colours, flexible solutions utilising non-powered conveyors are employed. This is the most expensive solution. All systems are custom-built according to customer specifications. Continuous hanging chain conveyor systems are designed and manufactured to individual client orders. In this system, it is also possible to implement floor conveyor systems to transport items such as flowerpots or wheels (see photo). ROMER also manufactures suspended transport systems. Cross-traverses (cross transporters) are specifically designed and manufactured for unique installation requirements. Use of a photocell Integrating a photocell in the detail area allows for length measurement and permits the guns to be activated as the part enters their range, and switched off immediately after coating to save energy and powder. The photocell is included as standard. Details can be identified using special markers. Above the hanger, plates with identification holes are installed. Based on this, the PLC controller, together with the photocell, recognises the coated part and switches the guns on and off at precisely the right time—saving energy and powder. Vertical shape detection. By using light barriers with horizontal detectors, the PLC can analyse the vertical profile of a part. The PLC also controls the dwell time of the part in the gun chamber, allowing for selective activation and deactivation of the guns. Light barriers with multiple sensors, both horizontally and vertically, are also available. This facilitates precise measurement of workpiece dimensions, enabling manipulator operation as well.

Leto izdelave: 2020, stanje: novo, Transportni sistemi Glede na zahteve kupca se lahko transportni sistemi premikajo po tleh ali visijo na stebrih. - Za udobne rešitve za ročne vgradnje priporočamo viseče nosilce (prečni transport). - Za avtomatizirane sisteme se najpogosteje uporabljajo verižni transporterji, ki se ne ustavijo in so odlična rešitev za podjetja, ki se osredotočajo na kakovost in ponovljivost postopka. - Za podjetja, ki hkrati izdelujejo različne predmete in imajo na primer več kabin z različnimi barvami, se uporabljajo prožne rešitve z uporabo brezžičnega transportnega traku. To je najdražja rešitev. Vse inštalacije so narejene po meri, odvisno od zahtev kupca, Sistemi verižnih transportnih vzmetenja - neprekinjeni, so zasnovani in izdelani po naročilu kupca. V tem sistemu je mogoče izdelati tudi spodnje transportne sisteme, na katerih so nameščeni detajli, na primer cvetlični lonci, platišča (fotografija). Podjetje ROMER se ukvarja tudi s proizvodnjo visečih transportnih sistemov. Križni traverzi (križni transporti) so zasnovani in izdelani za posebne naprave Uporaba ene fotocelice Uporaba ene fotocelice v prostoru detajla vam omogoča, da izmerite njegovo dolžino in tako omogočite vklop pištol, ko se detajli pojavijo v njihovem dosegu, in izklop pištol takoj po barvanju detajla. Fotocelica je standardna oprema. Identifikacija podrobnosti s posebnimi markerji. Nad zanko obdelovanca so plošče z identifikacijskimi luknjami. Hnjdpfxefz I D Dj Adkei Na njihovi osnovi krmilnik PLC v povezavi s fotocelico prepozna naslikane detajle, ob ustreznem času vklopi in izklopi pištolo - s tem prihrani energijo in prašno lakiranje. Vertikalno zaznavanje oblike dela. Uporaba svetlobnih vrat z detektorji vodoravno omogoča krmilniku PLC, da analizira navpično obliko detajla. Krmilnik PLC šteje čas, v katerem naj se podrobnosti pojavijo v prostoru pištole - zahvaljujoč temu je možno selektivno vklopiti ali izklopiti puško. Uporaba svetlobnih vrat z več senzorji vodoravno in navpično. Ta rešitev omogoča natančno merjenje dimenzij detajla, zahvaljujoč temu pa je mogoče tudi krmiljenje manipulatorjev.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on the customer's requirements, transport systems can either be moved on the floor or suspended from rails. - For user-friendly solutions in manual installations, we recommend suspended cross transfers (transverse transport). - In automated systems, chain conveyors are most commonly used. They operate continuously without stopping and offer an excellent solution for companies focusing on process quality and repeatability. Hodpfsfz I Edjx Adksni - For companies manufacturing a variety of items simultaneously, such as with multiple booths in different colors, flexible solutions using non-powered conveyors are utilized. This is the most expensive solution. All installations are custom-built according to customer specifications. Continuous transport systems for suspended chains are designed and manufactured based on individual customer orders. In this system, it is also possible to implement floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross-transfer units) are designed and manufactured to meet the specific requirements of individual installations. Use of a Photoelectric Sensor The use of a photoelectric sensor in the item area allows for length measurement and thus enables the spray guns to be activated when the item enters their range, and switched off immediately after coating. The photoelectric sensor is a standard feature. Identification of items by means of special markers. Above each sling, there are plates with identification holes. Based on this, the PLC controller, in combination with the photoelectric sensor, detects the coated item and activates or deactivates the guns at the correct moment—saving both energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of an item. The PLC controller tracks the time the item should appear within the gun zone—enabling selective activation or deactivation of the spray guns. With light barriers featuring multiple horizontal and vertical sensors. This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin Hedpfx Aofz I Ehodkjni The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) Hjdsfzkrnepfx Adksni To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Hnsdpfxofz A Iwj Adkei Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Transportni sistemi Glede na zahteve kupca se lahko transportni sistemi premikajo po tleh ali visijo na stebrih. - Za udobne rešitve za ročne vgradnje priporočamo viseče nosilce (prečni transport). - Za avtomatizirane sisteme se najpogosteje uporabljajo verižni transporterji, ki se ne ustavijo in so odlična rešitev za podjetja, ki se osredotočajo na kakovost in ponovljivost postopka. - Za podjetja, ki hkrati izdelujejo različne predmete in imajo na primer več kabin z različnimi barvami, se uporabljajo prožne rešitve z uporabo brezžičnega transportnega traku. To je najdražja rešitev. Vse inštalacije so narejene po meri, odvisno od zahtev kupca, Sistemi verižnih transportnih vzmetenja - neprekinjeni, so zasnovani in izdelani po naročilu kupca. V tem sistemu je mogoče izdelati tudi spodnje transportne sisteme, na katerih so nameščeni detajli, na primer cvetlični lonci, platišča (fotografija). Podjetje ROMER se ukvarja tudi s proizvodnjo visečih transportnih sistemov. Križni traverzi (križni transporti) so zasnovani in izdelani za posebne naprave Uporaba ene fotocelice Uporaba ene fotocelice v prostoru detajla vam omogoča, da izmerite njegovo dolžino in tako omogočite vklop pištol, ko se detajli pojavijo v njihovem dosegu, in izklop pištol takoj po barvanju detajla. Fotocelica je standardna oprema. Identifikacija podrobnosti s posebnimi markerji. Nad zanko obdelovanca so plošče z identifikacijskimi luknjami. Na njihovi osnovi krmilnik PLC v povezavi s fotocelico prepozna naslikane detajle, ob ustreznem času vklopi in izklopi pištolo - s tem prihrani energijo in prašno lakiranje. Vertikalno zaznavanje oblike dela. Uporaba svetlobnih vrat z detektorji vodoravno omogoča krmilniku PLC, da analizira navpično obliko detajla. Hnjdpfoflmdwox Adkoi Krmilnik PLC šteje čas, v katerem naj se podrobnosti pojavijo v prostoru pištole - zahvaljujoč temu je možno selektivno vklopiti ali izklopiti puško. Uporaba svetlobnih vrat z več senzorji vodoravno in navpično. Ta rešitev omogoča natančno merjenje dimenzij detajla, zahvaljujoč temu pa je mogoče tudi krmiljenje manipulatorjev.

Leto izdelave: 2020, stanje: novo, Touch-Auslösung löschen Die ROMER-Kabinen sind mit 4-Zoll-Farb-Touch-Bedienfeldern ausgestattet. Die Kabinensteuerung ist intuitiv und in drei Modi verfügbar: automatisch (temporär), automatisch (über einen Plug-in-Filteradapter) oder manuell. Filterstecker-Sensor Die Kabinen sind mit einem Sensor ausgestattet, der den Anwender informiert, sobald die Filter wegen Verstopfung gereinigt werden müssen. Das System meldet ebenfalls, wenn die Filter bereits im Einsatz sind. Automatische Filterreinigung Das elektronische System zur automatischen Filterreinigung steuert sowohl die Reinigungsintervalle als auch den optimalen Reinigungszeitpunkt. Jeder Filter wird individuell gereinigt; die Filter können bei Bedarf auch manuell mit einer Druckluftpistole gereinigt werden. Aus Erfahrung wissen wir, dass es schwierig ist, den Bediener regelmäßig zur Filterreinigung aufzufordern. Dank des automatischen Systems muss der Bediener hier nicht eingreifen oder die Produktion unterbrechen. Niedriges Geräuschniveau Die Aluminiumlüfter arbeiten sehr leise mit einer Lautstärke von 74–79 dB – das reicht nicht aus, um zu stören. Selbst bei der Standard-Kabinenkonstruktion ist es schwierig, sich innerhalb der Kabine zu unterhalten. Durchgehende Kabinen ("overhung squirrel cage") Hnsdsfzciqjpfx Adksi Die Kabine mit überhängenden Lüfterkäfigen trägt zur Produktivitätssteigerung bei, da die Lackierer sie nicht mehr manuell bewegen müssen. Vorratsfertiger Aufbau ist möglich. Explosionsschutz Die übrigen Kabinenkonstruktionen verhindern, dass sich während des Lackierprozesses explosionsfähige Gemische bilden. Jede Baugruppe wurde sorgfältig ausgewählt, um dieses Risiko wirksam zu minimieren.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved along the floor or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used, as they operate continuously and provide an outstanding solution for companies focused on process quality and repeatability. - For businesses that manufacture different items simultaneously—such as operating multiple booths with different colors—flexible solutions using non-powered conveyors are employed. This is the most costly option. Hodpjfz Nb Tofx Adkoni All installations are custom-built to suit customer requirements. Continuous transport systems for overhead chains are designed and manufactured according to individual client specifications. In this system, it is also possible to manufacture floor conveyor systems that carry items such as flower pots or rims (see photo). ROMER also produces overhead transport systems. Crossbeams (cross conveyors) are designed and manufactured to meet the requirements of specific installations. Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece zone allows for length measurement and enables automatic switching of spray guns when the item enters their range, turning them off immediately after coating the item. The photoelectric sensor is included as standard equipment. Item identification is possible via special markings. Over the sling, there are plates with identification holes. Based on these, the PLC controller, in conjunction with the photoelectric sensor, detects the painted item and switches the spray guns on and off at the correct time, thus saving both energy and powder paint. Vertical workpiece shape detection. By using light barriers with horizontal detectors, the PLC control system can analyze the vertical shape of a workpiece. The PLC calculates the time when the item is expected to appear in the spray booth, enabling selective activation or deactivation of the guns. With multi-sensor light barriers both horizontally and vertically arranged. This solution allows for precise measurement of workpiece dimensions, which also enables the control of manipulators.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Hnodpefz U S Esfx Adkji Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Leto izdelave: 2023, stanje: novo, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion layer), intermediate drying, electrostatic coating zone (booth/manual powder application unit), and dryer (curing oven). The workpieces are transported through the system by a conveyor system. Hsdpfxscv Nl Ro Adkjni Our company ROMER® designs, manufactures, and installs complete powder coating lines. Our systems can be inspected and tested in Hürth near Cologne. Request a quote for a system tailored to your specific application.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Wagner praškarnica na prodaju! Oprema za praškasto lakiranje, godina proizvodnje 2010, sastoji se od: Kabina: Prima Cube 16000 Dovod praha: Powder Center Povrat praha: Cyclon Filter 16000 Generator gibanja: KHG 350 Konfiguracije proizvodnog procesa UKLJUČUJU: I. Pretpriprema Maksimalna dimenzija komada: DxŠxV=2600x400x1850 mm II. Oprema Tehnološki transportni sustav automatske brzine V=1,2 m/min Podešavanje brzine između 0,5-2,5 m/min 1. Stanica za predobradu MNA-3-LPG, ukupna duljina 16,7 m Ulazna duljina L=2,5 m a. Pranje, odmašćivanje i fosfatizacija; L=3,6 m - broj raspršivačkih rama – 10 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 180 - kapacitet pumpe – 162 m3/h - snaga pumpe – 15 kW - spremnik 4 m3 za aktivnu tekućinu - unutarnji izmjenjivač topline s LPG plamenikom – 160 kW - temperatura 50°C - mehanički separator ulja - filter otopine - dozatorna membranska pumpa s regulatorom - vrijeme pranja – 3 min b. Zona kapanja L=3,1 m - vrijeme kapanja – 2 min 30 sek c. Prvo ispiranje; L=1,2 m - broj raspršivačkih rama – 4 - broj mlaznica po ramu – 18 Hnsdpfxsww Adts Adkji - ukupan broj mlaznica – 64 - kapacitet pumpe – 38 m3/h - snaga pumpe – 3 kW - spremnik 1,5 m3 za vodu - vrijeme ispiranja – 1 min c. Zona kapanja L=3,1 m - vrijeme kapanja – 2 min 30 sek d. Fino ispiranje; L=1,28 m - broj raspršivačkih rama – 3 - broj mlaznica po ramu – 18 - ukupan broj mlaznica – 54 - kapacitet pumpe – 33 m3/h - spremnik 1,5 m3 za vodu - snaga pumpe – 3 kW - dodatni raspršivački ram - broj mlaznica po ramu – 18 - vrijeme finog ispiranja – 1 min e. Zona kapanja L=2 m - vrijeme kapanja – 1 min 40 sek Tri priključka za ventilaciju s tri ventilatora Radni prostor izrađen od inoxa. Cijevi od PVC-a ili inoxa. 1 kom 2. Automatska sušara nakon vodenog tretmana AST-1-KLPG: - Dimenzije radnog prostora DxŠxV=7000x3000x2800 - Zračne zavjese na svakoj strani za sprječavanje gubitka topline - Indirektni izmjenjivač topline, pogonjen UNP-om, snaga 200 kW - Tri ventilatora, kapacitet 6000 m3/h svaki - Dva priključka za ventilaciju - Senzor temperature i regulator - Senzor pregrijavanja - Senzor cirkulacije - Radni prostor od pocinčanog čelika - Toplinska izolacija 200 mm debljine - Vrijeme sušenja 10 min 1 kom 3. Automatska peć za polimerizaciju praha APT-2-KLPG - Dimenzije radnog prostora DxŠxV=10200x3600x2800 - Zračne zavjese s jedne strane za sprječavanje gubitka topline - Dva indirektna izmjenjivača topline na UNP, svaki 300 kW - Osam cirkulacijskih ventilatora, svaki kapaciteta 6000 m3/h - Dva priključka za ventilaciju - Senzor temperature i regulator - Senzor pregrijavanja - Senzor cirkulacije - Radni prostor od pocinčanog čelika - Toplinska izolacija 200 mm - Vrijeme polimerizacije 25 min 1 kom 4. Nadglavni transportni sustav ATR-ADAX za lakirnicu, uključuje: • ravna staza s vješalicama L=400 mm: 146 m • pogonska stanica – 2 kom • stanica za zatezanje – 1 kom • stanica za podmazivanje lanca – 1 kom • nacrt potporne strukture – 1 set

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, TRANSFER-TYP PULVERBESCHICHTUNGSANLAGEN Das Transfersystemförderband besteht aus einer Kombination von Fördererschienen. Das optimale Layout der Pulverbeschichtungsanlage wird von unserer Projektabteilung individuell entsprechend den Werkstattmaßen, den zu beschichtenden Produkten und der täglichen Stückzahl konzipiert. Die Werkstücke werden auf Tragarme geladen, die entweder manuell oder automatisch bewegt werden, um die Produkte zur gewünschten Kabine oder in den Ofen zu befördern. Der Vorteil dieses Systems ist, dass die Produkte auf dem Förderer platziert werden und bis zum Ende des Prozesses ohne erneuten Kraftaufwand durch den Bediener weiter transportiert werden – das macht das System besonders effizient. Hodpfxsvv H Uue Adkjni Die Bewegung der Tragarme kann an jeder Stelle des Systems automatisiert werden, wodurch die gesamte Förderlinie eine kostengünstige Alternative zu Power&Free-Förderanlagen darstellt. Im Beschichtungssystem kann durch Ergänzung eines Förderbandes oberhalb der Pulver- oder Lackierkabine sowie durch den Einbau eines Rezipskators und einer automatischen Pistole eine automatische Beschichtung realisiert werden. Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise. * Büro in Frankreich und Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote.

Stanje: novo, Leto izdelave: 2025, HORIZONTALNA LINIJA ZA PRAŠNO BARVANJE ALUMINIJASTIH PROFILOV Dodajamo vrednost vaši proizvodnji. * Hitrost transporterja glede na vašo dnevno kapaciteto Zračni transporter – monorail ali power&free tip Hodpsvv Nh Refx Adkjni Avtomatizirana kabina za prašno barvanje, kovinska ali PVC antistatična konstrukcija Reverzibilni avtomatski sistem za nanašanje praška Tunelska peč za polimerizacijo – vir ogrevanja: plin, dizel ali elektrika Izdelano v Turčiji CE znak Nudimo najboljše tehnične rešitve in konkurenčne cene * Pisarna v Franciji in Nemčiji Kontaktirajte nas za več informacij in ponudbo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.400 mm, skupna višina: 2.300 mm, skupna širina: 250 mm, teža obdelovanca (maks.): 72 kg, Müüa peaaegu uus automaatne pulbervärvimisliin, paigaldatud 2023. aastal, töötatud ca 800 tundi. Paigaldusala vastavalt olemasolevale paigutusele: ca 12 x 28 m, kõrgus 5 m. Hind ja demonteerimise tähtaeg sõltuvad individuaalsetest kokkulepetest. Hjdpfx Adsx H Tadoksni Paigutusskeemi saab muuta – võimalik lisada eelpuhastustunelle ja ahju ehitada sirge tunnelina kuni 6+ m detailide jaoks. Võimalik pakkuda kogu liini hinnaga koos demontaaži ja transpordiga teise riiki vastavalt kokkuleppele. Suurepärane võimalus soetada praktiliselt uus liin soodsama hinna ja kiirema tarnega võrreldes uuega. Monorels-konveier: - kiirus 0,9–3,3 m/min - automaatne määrimine - automaatne pingutusüksus - ahela samm 270 mm - kogupikkus 131 m - kogukoormus 9500 kg - terasest toed põrandal-konveieri vahel Automaatne pulbervärvimise kabiin Gema: - PVC kabiin MagicCompact EquiFlow BA04 - MagicControl 4.0 juhtpaneel - fototakistusega raam püstolite juhtimiseks - 16 x OptiGun GA03-P automaatvärvipüstol - 1 x OptiSelect GM04 käsipüstol - 17 OptiSpray AP01.1 värvipihustuspumpa - OptiCenter OC07 pulbervarustussüsteem - Ultrasonic sieve US07 OptiCenterile - 2 tk ZA07-23 reciprocatorit automaatse X-telje juhtimisega - MonoCyclone EZ05-16, 16 000 m3/h - Pulberfilter 16 000 m3/h, 30 kW - Big-Bag süsteem jäätmepulbri jaoks - CO2 plahvatuskaitsesüsteem - Manuaalse pritsseinaga / käruühik piltidel EI KUULU KOMPLEKTI Pulbervärvi kuivatusahi: - Hübriidküte – võimalik kasutada nii elektrit kui gaasi! Haruldane paindlikkus valida soodsama energiaallika vahel. - Paigaldatud võimsus 300 kW - Maks. temperatuur 220°C - Siemens PLC juhtpaneel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Kabina za prašno lakiranje + ročna pištola za prašno lakiranje Višina: 250 cm Število filtrov se prilagodi glede na projekt Prednosti kabine za lakiranje Hodpfx Adov Nvkfokoni Uporaba lakirnih kabin podjetjem prinaša številne prednosti Visoka kakovost barve: Delo v okolju, zaščitenem pred prahom, umazanijo in drugimi zunanjimi dejavniki, zagotavlja bolj gladko in estetsko površino. Energetska učinkovitost: Sodobne lakirne kabine imajo funkcije za varčevanje z energijo, kar zmanjšuje stroške in zagotavlja okolju prijazno rešitev. Varnost pri delu: Zdravje zaposlenih je zaščiteno z izločanjem škodljivih plinov in delcev, ki nastajajo med postopkom lakiranja. Skladnost: Kabine za lakiranje olajšujejo izpolnjevanje industrijskih standardov kakovosti.

Stanje: novo, Leto izdelave: 2026, BUMEX Sp. z o.o. | Industrial Powder Coating Technology Professional, compact powder coating system in industrial quality, designed for series production as well as demanding workshop applications. The construction focuses on process stability, durable design, and the highest coating quality. Complete solution ready for immediate use in professional coating operations. Scope of Delivery ✅ Powder Coating Curing Oven 1200 × 1500 × 1800 mm ✅ Powder Coating Booth with Filtration System 1400 × 800 × 1400 mm POWDER OVEN — INDUSTRIAL STANDARD BUMEX Technical Data Working dimensions: 1200 × 1500 × 1800 mm Total power: 18 kW Design Highlights ✔ Stainless steel front frame prevents paint chipping in the door/frame area even after years of operation, ✔ very uniform temperature distribution thanks to powerful recirculating air operation — no overheating or underheating of workpieces, ✔ heavy-duty industrial construction designed for continuous operation, ✔ 4 patented BUMEX safety latches for optimal door pressure, chamber tightness, and maximum operator safety, ✔ internal and external carts for ergonomic loading and unloading, Hodehd Nraopfx Adksni ✔ optimized air circulation for reproducible coating results. Result: fast heat-up, stable temperature control, and perfectly cured powder coating. POWDER COATING BOOTH Technical Data Working dimensions: 1400 × 800 × 1400 mm Fan power: 1.5 kW Airflow: 6500 m³/h Premium Features ✔ Constructed from powder-coated, galvanized sheet steel with high corrosion resistance, ✔ 2 × 100% polyester filters in TWIST system — rapid, tool-free change, ✔ automatic filter cleaning for constant performance, ✔ very powerful yet quiet industrial fan, ✔ stable airflow for effective powder separation, ✔ ergonomic work area. BUMEX Quality Standard ✔ CE conformity, ✔ complete technical documentation, ✔ manufacturer's warranty, ✔ warranty and after-sales service, ✔ professional technical support. Trade Terms ✔ own transport — individual pricing, ✔ delivery with VAT invoice, ✔ customized configurations available. BUMEX Sp. z o.o. We develop industrial technology for long-term reliability, safety, and stable processes.

Leto izdelave: 2025, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 Hodsflk Awspfx Adksni ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2025, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ Hodpefz Nd Iefx Adkjni 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2025, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ Hsdpfsfz U Nbex Adkeni 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Stanje: rabljeno, Leto izdelave: 1995, Konstantni stroj - kombinirana postaja, krtača za prah - naprava za merjenje debeline - elektronska posamezna brusna čevelj MCS sistem Weber 32 mm - utorni jekleni kalibrirni valj - izpihovanje traku - vakuumska preproga. Širina brušenja: 1100 mm. Pogon: 15 kW. Podajanje ca. 1,1 kW. Nastavitev višine 0,25 kW. Dimenzije brusilnega traku: 1150 x 2500 mm. Maksimalna debelina obdelovanca: 150 mm. Širina stroja: 1700 mm. Dolžina stroja: 2000 mm. Višina stroja: 2160 + 150 mm. Teža stroja: 1900 kg. Konstantna delovna višina: 850 mm. Priklop za odsesavanje: trak 180 mm / krtača 120 mm. Količina sesalnega zraka: 0,74 m³/s. Priključna moč: 23 kW. Priključek za stisnjen zrak: 7 bar. Hitrost podajanja: 3–15 m/min. Delovnih ur: 7000 h. Lokacija skladišča: Nattheim Hodpfx Adex Twcpskjni

Leto izdelave: 2026, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Passenger Car Spray and Drying Booth DURST / CMC Concord – 26,000 m³/h – upgraded – ready for operation Manufacturer: CMC / DURST Paint Systems Model: Concord Year of cabin: 1998 Modernisation: 2016 For sale is a professional passenger car spray and drying booth from our bodywork and paint shop. The system is currently still in daily operation and can be fully tested on site. Sale is only due to investment in new, modern spray booths. Technical Data Internal cabin dimensions Length: approx. 7,000 mm Width: approx. 4,000 mm Height: approx. 3,000 mm External dimensions Length: approx. 7,100 mm Width: approx. 4,100 mm Height: approx. 3,800 mm Air Volume Supply air: 26,000 m³/h Exhaust air: 26,000 m³/h Air Exchange Rate approx. 310 air changes per hour Fans Radial fans Motor power: each 7.5 kW Heating System Gas surface burner Heating capacity: approx. 260–300 kW Maximum drying temperature: 80°C Fuel Originally natural gas Currently converted to liquefied petroleum gas (LPG) Electrical Data Connected load: approx. 20 kW 400 V / 50 Hz Equipment/Features Spray and drying modes Automatic spray/dry mode switching Frequency converters for fans Temperature control 0–100°C Ceiling filter pressure monitoring Ceiling filter system Floor grid extraction Overrun timer Operating hours counter Burner safety shutdown Explosion-proof pushbuttons Control cabinet with digital display Complete supply and exhaust air units Fresh air and exhaust air ducts Condition System is fully operational Currently still in use Inspection and functional testing possible at any time Delivery / Dismantling System can be inspected by arrangement Dismantling and transport by buyer Hnsdjyrxy Sepfx Adkji Forklift assistance may be provided if required Location Germany 35582 Wetzlar

Stanje: dober (rabljeno), Leto izdelave: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per furnace: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load dimensions: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Maximum temperature: 600 °C Operating temperature: 510 °C Hnedpsyiaf Iefx Adkji Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: type = QT-24.16.57/71E Max. bath temperature: 70 °C, capacity = 20 m^3 2 tempering furnaces: type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Max. furnace temperature: 250 °C Operating temperature: 180 °C Total power: 2 x 40.5 kW = 81 kW electric loading/unloading track, GEA cooling coil, safety enclosure, safety devices, plant control system 1,056 annealing baskets with post pallets System already dismantled, packed and in storage