Naprava za prašno lakiranje

Braun Vorschub Antrieb

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Dedopugwiopfx Apljcg A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) Dodpjlgvkijfx Aplecg - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Working range: - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min Dedpfx Apen E N Ndslecg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Dcjdjd Tiu Espfx Aplsg Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna višina: 215 mm, skupna širina: 130 mm, skupna dolžina: 360 mm, skupna masa: 7 kg, trajanje garancije: 12 meseci, vrsta hlajenja: zrak, višina izdelka (maks.): 10 mm, varilni tok pri 60% delovnega cikla: 150 A, varilni tok pri 100% delovnem ciklu: 130 A, varilni tok (min.): 5 A, varilni tok (maks.): 200 A, - Inspected used unit in excellent condition, directly from the manufacturer - - Multiple units available - MicorTIG 200 DC ControlPro (Accu-ready) TIG-DC welding inverter with MicorBoost technology (incl. gas management, high frequency ignition, and electrode welding function). All-in technology for mains, generator, and battery power - "3 steps and weld" operating concept - Simple single-knob control - Continuously adjustable current - Precise digital ampere display - With graphical user interface on OLED graphic display - Maximum customization thanks to detailed welding cycle control - Job memory for 10 welding tasks Djdpfx Apjvxid Relocg Current list price (02/2025): 2,277 € plus VAT Scope of delivery: Unit including detachable mains cable, carrying strap, gas hose, and operating manual THE MicorTIG SERIES. THE POWER PACKS FOR MOBILE TIG WELDING. Whether for professional TIG welders or occasional users: The MicorTIG series welding machines from Lorch are the ultimate TIG units for installation work as well as for the workshop – suitable for steel and stainless steel. Whether for production or repair, and whether you have mains power on-site or not: The MicorTIG series improves TIG welding results worldwide – and makes everyday work easier. Quite literally: Weighing only 6.8 kg, you can easily take your Lorch MicorTIG welding unit anywhere – even with accessories in the carry case. Small but powerful: With patented MicorBoost technology, these machines deliver 200 amps from any standard power outlet. INTUITIVE OPERATION. Thanks to the precise digital ampere display and clearly structured control panel, operation is intuitive and highly precise. Optionally available: an operating concept via graphic display. CONTACTLESS HF IGNITION. TIG ignition occurs contactlessly with high-voltage pulses at the push of a button. Since the tungsten electrode does not touch the workpiece, no inclusions are created in the seam and the electrode is preserved. PULSING AND FAST PULSING UP TO 5 kHz. The integrated pulse and fast pulse functions up to 5 kHz are ideal for working with thin sheet metal. They enable outstanding weld pool control and perfect results, even for demanding welding tasks. JOB MEMORY FOR UP TO 10 WELDING TASKS. With the job function, you can save parameters for up to 10 welding tasks and quickly retrieve them when needed. Recurring jobs are therefore completed quickly and efficiently. PERFECT FOR ELECTRODE WELDING. The MicorTIG machines from Lorch are suitable for every type of electrode and offer convenient pre-selection for CEL and standard electrodes. Even special electrodes are no problem. During welding, arc force regulation ensures arc stability and optimum material transfer. The anti-stick system prevents sticking or annealing of the electrode. WITH MicorBoost TECHNOLOGY – UP TO 200 A FROM THE OUTLET. The patented MicorBoost technology provides substantial voltage reserves and controls the TIG arc extremely stably, safely, and precisely – even with fluctuating mains voltage. This enables you to weld with up to 200 amps on a regular power outlet.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Dcedpjhlp Efefx Aplsg

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Dodpfx Ascdrmmeplscg Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Moč: 3,1 kW Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Napetost: 220/380 V 50 Hz Moč: 3,92 kW Brez krmiljenja

Leto izdelave: 1955, stanje: rabljeno, Radial drilling machine, drilling machine, arm drilling machine - Arm reach: 2055 mm - Max. distance from machine table to spindle mount: 1700 mm - Taper mounting: MK5 - Motor power: 7.5 kW Dsdpfx Aped Enr Iolecg - Spindle speeds: 11.2–1400 rpm - Column diameter: Ø 450 mm - Spindle stroke: 540 mm - Thread cutting device - Automatic feed: 0.037–2.0 mm/rev - Clamping surface: 920 x 1600 mm - Dimensions: 2580/1110/H3450 mm - Weight: 6465 kg

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Max. rolling diameter: 41 mm Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Max. stroke of the tool holder slide: 760 mm Max. rack length: 610 mm Dsdod Nw Ttepfx Aplscg Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Main motor power: 15 HP

Stanje: novo, Bernardo Manual Metal Circular Saw CS 315 H Technical Specifications Saw blade diameter: 315 x 40 mm Speed: 19 / 38 rpm Max. vice opening: 150 mm Working height: 920 mm Motor output S1 100%: 0.75 / 1.5 kW Motor input power S6 40%: 1.0 / 2.1 kW Voltage: 400 V Machine dimensions (W x D x H): 530 x 1000 x 1740 mm Weight: approx. 235 kg Solid round material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Square tube 90°: 80 x 80 mm 45°: 70 x 70 mm Solid square material 90°: 80 x 80 mm 45°: 70 x 70 mm Rectangular tube 90°: 90 x 80 mm 45°: 80 x 70 mm Solid rectangular mat. 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head swivels 90° left and right for slotting operations Removable coolant tank integrated into robust machine base Gearbox with hardened and ground worm shaft and bronze worm wheel Safety guard opens automatically during cutting Precision, 4-way guided, self-centering double vise Dcjdpfx Ajd Id Ugjpljg Ergonomically shaped handle with push-button for fatigue-free sawing Low blade speed (19 / 38 rpm) ideal for cutting solid materials Noise-reduced reduction gearbox running in oil bath Scope of Delivery Coolant system with filter Self-centering vise Machine base