Peskalni sistemi nakup rabljenega (155)

Stanje: dober (rabljeno), Leto izdelave: 2008, Háčikový tryskací stroj 500 kg COGEIM PG 10x15 Typ: háčikový Maximálny premer obdelka: 1000 mm Maximálna višina obdelka: 1500 mm Maximalna teža obdelka: 500 kg Širina odprtine stroja: mm Št. turbin: 2 Tip turbine: 360 Premer turbinskega kolesa: 360 mm Moč turbine: 7,5 kW Maks. pretok turbine: 105 kg/min Gjdpfxjylhhro Adkjbr Tip transportne tirnice: Y Tip čistilnika: zračni izpihovalec (airwash) Temelji: ne Zaščita ohišja: Mn + guma Potreben pretok zraka: 3.000 m3/h Maksimalna instalirana moč: ca. 19 kW Skupna teža stroja: 0 kg Skupna širina stroja: mm Skupna višina stroja: mm Skupna dolžina stroja: mm !!! Z ATEX filtrsko enoto !!! Stroj je v fazi celovite obnove. Vsi poškodovani deli bodo zamenjani z novimi, turbine bodo v celoti obnovljene, nova barva RAL 7037/2000... Stroj bo dostavljen v stanju primerljivem NOVEMU. !!! STANJE KOT NOVO !!!

Stanje: dober (rabljeno), Stroj za obdelavo z gumijastim trakom Največja prostornina obdelave: 120 l Največja masa obdelave: 200 kg Največja masa posameznega dela: 10 kg Gjdpfozh Ikwex Adksbr Premer komore: 700 mm Širina komore: 750 mm Število turbin: 1 Moč turbine: 5,5 kW Največji pretok turbine: 77 kg/min Vrsta čistila: zrak Temelji: ne Zaščita ohišja: Mn + guma Filtrirna enota: DA Največja nameščena moč: pribl. 13 kW STROJ JE V ODLIČNEM STANJU.

Stanje: dober (rabljeno), Leto izdelave: 2010, Stroj za peskanje s kavljastim nosilcem, nosilnost 500 kg OMSG CAPRI 10x15 Tip: kavljasti nosilec Maksimalni premer obdelovanca: 1000 mm Maksimalna višina obdelovanca: 1500 mm Maksimalna teža obdelovanca: 500 kg Širina odprtine stroja: mm Število turbin: 3 Tip turbine: 360 Premer kolesa turbine: 360 mm Moč turbine: 7,5 kW Maksimalni pretok turbine: 105 kg/min Tip transportnega sistema: Y Tip čistilnega sistema: zračni sistem Temelji: ne Zaščita ohišja: Mn+ guma Potreben pretok zraka: 3.000 m3/h Maksimalna vgrajena moč: pribl. 27 kW Gbodpfx Adjzt Nraskor Skupna teža stroja: 0 kg Skupna širina stroja: mm Skupna višina stroja: mm Skupna dolžina stroja: mm !!! Vključno s filtrirno enoto !!! Stroj je v ODLIČNEM stanju. Je razstavljen in pripravljen za dostavo.

Stanje: rabljeno, Peskalni stroj, oprema za čiščenje površin, peskalna kabina, rabljeni stroj Gedpfx Ajy H I U Nodkjbr Kompresor: Proizvajalec: Atlas Copco Tip: XAS 90 Leto izdelave: 1992 Maksimalni tlak: 8,5 bar Motor Deutz Skupne dimenzije: Širina: 1500 mm Dolžina: 3500 mm Višina: 1300 mm Dimenzije rezervoarja: Ø 630 × 1200 mm – 2 kosa Dimenzije prašne komore: Širina: 930 mm Dolžina: 630 mm Višina: 1390 mm Prodaja se v stanju, kot je prikazano na slikah, z opremo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 22 h, skupna masa: 1.500 kg, Ponujamo demonstracijski model mize za peskanje – kakovostna češka izdelava, pri proizvodnji so uporabljeni kakovostni materiali. Tip – TSM1. Število delovnih ur – 22. – premer vrtljive mize – 1000 mm – maksimalna višina obdelovanca – 550 mm – skupna višina stroja – 2750 mm – 1 x metanje turbina – priključna moč – 5,5 kW, turbina s frekvenčnim spreminjalnikom za regulacijo hitrosti vrtenja turbine. Turbina ima levo in desno smer vrtenja, glede na potrebo. – transportni valj – priključna moč – 0,75 kW. – pogon mize – priključna moč – 0,75 kW – skupna priključna moč stroja – 7 kW. Kabina je obložena z manganovo pločevino. Prav tako izdelujemo mize za peskanje s premerom mize – 1500 mm. Velika prednost stroja je možnost spreminjanja smeri vrtenja turbine na desno ali levo. Naprava za peskanje ima certifikat CE. Gbjdpfsztvclex Adkor Dodatna prednost naprave je visoka učinkovitost pri peskanju, tiho delovanje, nizka poraba energije in tudi zahteva po majhnem prostoru za namestitev naprave. V svoji kategoriji je ta miza za peskanje s svojo zasnovo mogoče šteti za zelo dovršeno. (Peskalnica, peskanje, brušenje z abrazivom, peskalna, abrazivna, miza za peskanje). Naprava za peskanje.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo obnovljene turbine iz serije Rösler RRB 22/5-L. Gbodpoztp Aljfx Adkjr Tip turbine – Hurricane H42. Navedena cena je za 1 kos. Turbine so obnovljene z uporabo originalnih nadomestnih delov iz orodnega jekla. Peskalna naprava, brizgalna pištola, peskalno brizgalna naprava, peskanje, brizganje, metanje s turbino.

Stanje: dober (rabljeno), Leto izdelave: 1997, SGT, peskalna naprava SS-85 Leto izdelave: 1997 Gbsdpfx Adeznl Dnjkjr Opremljena s sistemom za vrtenje obdelovanca. Opremljena s sistemom za odsesavanje prahu. Naprava je v delovnem stanju in se nahaja v našem skladišču.

Stanje: pripravljen za uporabo (rabljen), Oprema: dokumentacija / priročnik, Ponujamo peskalno kabino Škoda. Naprava je popolnoma delujoča in pripravljena za uporabo. Možnost preizkusa. Velikost notranjega delovnega prostora: 2900 × 2900 × 2900 mm. Kabina z zbiranjem abrazivnega peska na dnu, sistemom za transport peska do čistilnega sistema + peskalna enota Clemco 200 l + filtrirna enota. Gbsdpfxszrmqdo Adksr Popolna oprema.

Stanje: pripravljen za uporabo (rabljen), Stroj za peskanje MHG SMG 45 K (kabina z negativnim tlakom) -Delovni prostor 1100x660x700 mm -Vgrajeno sesalno sistema -Dve stranski vrati / tesno zapiranje proti prahu -Stroj, dvojna stena, z zvočno izolacijo Gbsdpoztrk Ejfx Adkor -Peskarska pištola z nastavkom -Delovni tlak 3 – 7 bar -Vklop/izklop - osvetlitev - sesalni sistem -Regulator tlaka - manometer - nožni stikalo -Pregledna plošča -Dokumentacija Mere: D x Š x V 1,5 x 1,6 x 1,8 metra / Teža 380 kg Pridržujemo si pravico do sprememb zaradi napak / tipkarskih napak.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Obračalni stroj Matt HV 1216. Dve turbini, moč 11 kW. Odlično stanje, malo rabljen. Gbsdoztkzijpfx Adker

Stanje: pripravljen za uporabo (rabljen), Ponujamo bobnasti razpršilnik – OMSG TAPPETO SG 1R – FAC / 2. Gedpfx Adjzp U Uxjkebr Naprava je v popolnem delovnem stanju, nameščen je nov gumijast pas. Moč stroja: Turbina – 4 kW Filtr – 1,5 kW Vijakasti transporter – 0,75 kW Vrtenje bobna – 0,75 kW Dimenzije stroja: Višina – 3400 mm Globina – 1850 mm Širina – 1500 mm Masa – 1500 kg Stroju je priložena popolna dokumentacija, vključno z električno dokumentacijo.

Stanje: zelo dobro (rabljeno), OMSG LAUCO 100 N-SP4 Tip: Valjčni transporter Maks. širina obdelovanca: 1.000 mm Maks. višina obdelovanca: 400 mm Maks. obremenitev/valj: 800 kg Št. turbin: 4 Gbjdpfx Adezh H Ibskjr Premer turbine: 350 mm Moč turbine: 7,5 kW Maks. pretok turbine: 105 kg/min x 4 Transportna hitrost: 0,5 – 3 m/min Vrsta čistilnika: Zračno čiščenje Filtrirna enota: Vključena FX20/1 Temelj: ne Skupna širina stroja: pribl. 5.500 mm Skupna višina stroja: pribl. 4.500 mm Skupna dolžina stroja: pribl. 12.000 mm Maksimalna instalirana moč: pribl. 50 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Description to follow! Gsdpfxexzk Ilj Adkjbr

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Ponujamo neprekinjeno sušilno napravo – Gutmann RZ – 1252. Letnik izdelave: 1983 Dimenzije vhoda/izhoda: 1200 x 350 mm (š x v) Turbine: 4 x 7,5 kW Električni razdelilnik je nov, nameščen leta 2024, vključno s frekvenčnimi spreminjalniki. Transportni trak na vhodu: približno 9000 mm Transportni trak na izhodu: približno 9000 mm Filtrirna enota – Bartling Letnik izdelave: 1996 Kapaciteta: 6000 m3/h Moč motorja: 5,5 kW Stroj je v delovnem stanju in še vedno v uporabi. Godpozl Ryiefx Adkebr Navedena cena je za celoten stroj + razdelilnik + filtrirna enota + transportni trakovi.

Stanje: rabljeno, Leto izdelave: 2003, Peskalna pištola PAUL AUER ST1000J, št. 3440, leto izdelave 2003. Gbodpfxozqclnj Adkor

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, obratovalne ure: 1.437 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4204, pritisk: 6 letvica, skupna širina: 1.700 mm, notranja širina: 1.700 mm, teža obdelovanca (maks.): 3.000 kg, premer vrtljive mize: 1.400 mm, Ponujamo strojno obdelovalno napravo Carlo Banfi, proizvedeno leta 1999, ki jo je podjetje METAL SERVICE s.r.l. v celoti obnovilo leta 2024. Stroj z rotirajočim cilindrom in kovinskimi letvami Kapaciteta: 3.000 kg Premer: 1.400 mm Širina komore: 1.700 mm Magnetni separator Dvojna turbina, vsaka z električnim motorjem moči 30 kW in jermenskim prenosom Opremljena z: Filtrirnim sistemom za zbiranje prahu Polno opremljenim nakladalnim vedrom z ograjo Transportnim trakom za izpust obdelanih delov Opremljena s certifikatom CE, električnimi shemami ter navodilom za uporabo in vzdrževanje Gsdpsznvtajfx Adksbr Če imate kakršna koli vprašanja ali potrebujete dodatne informacije, nam pišite ali pokličite.

Stanje: novo, Leto izdelave: 2025, moč: 5 kW (6,80 KM), SAPI Premium Pressure Blast Apparatus, 200 liters, with cyclone separator and abrasive vacuum for abrasive media processing. This blasting system offers a cost-effective, highly efficient, and effective solution for open blasting operations with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of various types of workpieces by an operator, including abrasive media processing. The abrasive media is collected by hand after blasting and pushed into the collection hopper at the bottom. The abrasive vacuum extracts the media from the hopper and draws it through the cyclone separator. During this process, dust is extracted and collected in the vacuum's dust container. Coarse particles are separated out via a screen. Gedpfxswc Rcns Adkjbr The cleaned abrasive falls back into the vented pressure blasting vessel and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control enables starting and stopping of the blast vessel with a hand lever mounted on the blasting hose assembly. This is a very economical and effective solution for open blasting operations with semi-automatic abrasive recycling. Scope of delivery includes: - SAPI Premium Blast Vessel, 200 liters with 1 1/4" piping, pressure-regulated from 0.1 – 12 bar, max. operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted on the device - SAPI safety shut-off - Cyclone separator for abrasive processing with lifting device - Abrasive media sieve (insert sieve in blast vessel hopper) - Loading hopper 500x500x380 mm - 4-meter connecting hose from loading hopper to cyclone separator - 3-meter connecting hose from cyclone separator to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control cable, and blast hose coupling - Boron carbide venturi long nozzle (optional diameters: 6 mm, 8 mm, or 10 mm)

Stanje: novo, ROBOBlast: Automated Precision Sandblasting Experience the power of ROBOBlast, our state-of-the-art robotic sandblasting system engineered for precise, efficient, and consistent surface preparation. Perfectly suited for industrial applications that demand high performance with minimal human intervention. ROBOBlast: Solutions for Robotic Sandblasting The ROBOBlast system delivers a highly efficient and precise robotic sandblasting solution tailored to the needs of modern industry. Designed for performance, it automates surface preparation, ensuring consistent results with minimal human input. This system is the ideal choice for companies seeking to optimize their surface treatment processes. Precise and Efficient Surface Preparation ROBOBlast delivers uniform sandblasting performance across various surface types and materials. Automation enables increased accuracy and consistency, eliminating the variability associated with manual operation. Gbjdpjwf Dr Uofx Adkjr Whether for small or large-scale projects, ROBOBlast ensures high-quality surface preparation every time.

Stanje: novo, Leto izdelave: 2025, pritisk: 12 letvica, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that captures all dust and removed materials during operation. This eliminates not only the need for extensive cleaning, but also protects the operator and those nearby from the harmful effects of airborne particles. With a dust-free sandblasting machine, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to intuitive controls and user-friendly design, these machines are also easy to operate for sandblasting beginners. ✅ PR 50 Dust-free sandblasting machine With its versatile range of applications, the PR 50 can process a wide variety of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for anyone working in the automotive, construction, or cleaning industries, to name just a few. Thanks to its compact size and convenient design, it is easy to operate and transport—even for those new to sandblasting. Gbodsupzn Eepfx Adkjr

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder Gedpfx Aowc Ri Isdkjbr - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Stanje: novo, SAPI Mammut peskalni stroj s sistemom QUICK STOP™ Industrijski peskalni stroj SAPI Mammut s sistemom QUICK STOP™ je zmogljiva naprava za peskanje, ki se uporablja v industrijah, kot so avtomobilska, gradbena in proizvodna. Namenjen je hitri in učinkoviti pripravi površin, čiščenju in obdelavi kovine, betona in drugih materialov. QUICK STOP™ – Varnost in Zaščita QUICK STOP™ je varnostna funkcija, ki preprečuje nesreče in ščiti napravo pred poškodbami. Takoj ustavi peskanje takoj, ko operater spusti krmilni ročaj, s čimer preprečuje nevarnosti in prekomerno obrabo opreme. Učinkovitost in Vzdržljivost Sistem QUICK STOP™ zmanjšuje porabo zraka in energije, zaradi česar je peskanje bolj ekonomično in učinkovito. Peskalni stroj Mammut je izdelan iz visokokakovostnih komponent, ki zagotavljajo zanesljivo delovanje tudi v težkih razmerah. Vsi naši stroji so CE in TÜV certificirani. Fleksibilnost in Vsestranskost Na voljo v različnih velikostih, da ustreza različnim potrebam peskanja. Združljiv je z več vrstami abrazivov, od standardnega peska do plastičnih in kovinskih granulatov. Mammut s sistemom QUICK STOP™ je idealen za pripravo površin, čiščenje in odstranjevanje rje, barve in premazov. Natančnost in Enostavna Uporaba Mammut s sistemom QUICK STOP™ omogoča natančno nastavitev tlaka med delovanjem, kar zagotavlja dosledne rezultate in visoko natančnost. Opremljen je tudi z lahko dostopnimi točkami za pregled in vzdrževanje. Maksimalna Varnost Sistem QUICK STOP™ z varnostnim stikalom zagotavlja najvišjo varnost pri uporabi. Prav tako preprečuje nabiranje vlage v stroju, saj ohranja konstanten tlak tudi po zaustavitvi peskanja, kar ni mogoče pri običajnih vklop/izklop sistemih. Popolna Oprema Vsi Mammut peskalni stroji s sistemom QUICK STOP™ so popolnoma opremljeni in vključujejo: ✔ Peskalno cev Gjdpeupyw Eefx Adkebr ✔ Šobo za peskanje ✔ Regulator tlaka ✔ Ločevalnik vode ✔ Dozirni ventil za abraziv ✔ Osnovno osebno zaščitno opremo

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 12 meseci, skupna širina: 2.438 mm, skupna višina: 2.896 mm, skupna dolžina: 6.058 mm, skupna masa: 3.300 kg, teža obdelovanca (maks.): 5.000 kg, filtrirna površina: 40 m², kapaciteta rezervoarja: 200 l, Oprema: osvetlitev, Ponujamo vam inovativno rešitev! Visokokakovosten High Cube kontejner za notranjo in zunanjo uporabo. Ta kontejner je izdelan iz vzdržljivega Corten jekla, kar zagotavlja vsaj 30-letno življenjsko dobo. Popolnoma je zatesnjen, odporen proti vetru in vodoodporen. Gbodpouiwu Hefx Adkor Kaj je vključeno? ✔ Tlačna peskalna naprava Premium 200 z ročnim recikliranjem abraziva, primerna za vse običajne večkratno uporabne abrazive. ✔ Integriran filtracijski sistem v kontejnerju (vključno s predločevalnikom udarcev, povezovalnimi elementi itd.). ✔ Prednameščena električna napeljava in LED osvetlitev za takojšnjo uporabo. Robusten, varen in pripravljen za vsestransko uporabo! Ta enota je takoj operativna in zasnovana za različne industrijske aplikacije. Možen prevoz Prevoz je na voljo po dogovoru, cene so določene glede na dnevne tarife. Če vas zanima ali imate vprašanja, me prosimo kontaktirajte! Za več podrobnosti ali ponudbo me lahko kontaktirate neposredno – z veseljem vam bom pomagal! Za povpraševanja ali ponudbe se obrnite na g. Andreasa Wallnerja kadarkoli.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SAPI Jumbo, pritisk: 12 letvica, skupna širina: 3.087 mm, skupna višina: 2.078 mm, skupna dolžina: 3.692 mm, skupna masa: 3.000 kg, notranja širina: 2.340 mm, notranja dolžina: 3.520 mm, notranja višina: 2.500 mm, teža obdelovanca (maks.): 500 kg, filtrirna površina: 20 m², Oprema: osvetlitev, Učinkovita in pripravljena JUMBO peskalna kabina Ta JUMBO peskalna kabina, popolnoma sestavljena in prehoden model, ponuja celovito rešitev za učinkovito peskanje. Opremljena z dvema LED svetilkama, zagotavlja optimalno osvetlitev delovnega območja. Dvokrilna vrata omogočajo enostaven dostop in rokovanje z večjimi obdelovanci, medtem ko zaščitna gumijasta obloga v notranjosti preprečuje obrabo in podaljšuje življenjsko dobo kabine. Gbsdpfx Ajukdfpjdksr Za filtracijo zraka in zmanjšanje prahu je kabina opremljena z visokozmogljivim kartušnim filtrom in udarno ločevalno enoto, kar zagotavlja čisto delovno okolje. Ploski transportni sistem v tleh, pokrit z rešetko, omogoča samodejno vračanje abraziva, medtem ko električni pogonski sistem zagotavlja nemoteno delovanje. Poleg tega je kabina opremljena z dvigalom z vedri in visokozmogljivim sistemom za reciklažo abraziva, ki omogoča učinkovito obdelavo in ponovno uporabo peskalnega materiala. 38-litrski tlačni peskalni kotel zagotavlja zadostno kapaciteto za daljše delovne cikle. V kompletu so tudi 10-metrska peskalna cev in trpežna šoba iz borovega karbida, ki zagotavlja optimalne rezultate peskanja. Idealna rešitev za profesionalno peskanje Ta peskalna kabina je popolna rešitev za podjetja, ki potrebujejo zanesljiv in učinkovit sistem za peskalne operacije. ✔ Možne dodatne opcije, kot so nakladalni vozički, na zahtevo. ✔ Dovod stisnjenega zraka, električne energije in montaža morajo biti zagotovljeni na lokaciji. Če ste zainteresirani ali imate vprašanja, nas kontaktirajte kadarkoli!

Stanje: novo, Leto izdelave: 2025, INJECTOR Sandblasting Cabinets The benefits and applications of injector sandblasting cabinets Injector sandblasting cabinets utilize an air-powered Venturi system to create a vacuum that draws abrasive blasting media into the airflow. The abrasive media is then propelled at high speed from the blasting nozzle, impacting the surface to be cleaned or prepared. Injector sandblasting is generally used for lighter-duty applications. Our SAPI injector sandblasting cabinets – including the Elch, Widder, and Büffel models – use an air-operated suction system that draws the abrasive media up to the nozzle, where it mixes with the airflow and is then blasted onto the workpiece. These cabinets are ideal for lighter applications and provide efficient, cost-effective solutions. ----- The Widder 70 / 100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a spacious working area, a right-hand side door, and an efficient dust extraction system, this cabinet is designed for use with various types of blasting media and can accommodate small to medium-sized components. Ideal for industrial applications, such as in metal fabrication shops and workshops. ----- Godpfowf Dwwex Adkebr The Elch 100 / 130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows easy monitoring of the blasting process and ensures a clean, safe working environment. The Elch is suitable for use with a wide range of abrasive media. Its user-friendly design and efficient blasting process make it the ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140 / 180 injector sandblasting cabinet is a heavy-duty blasting machine engineered for demanding applications. It features an air-powered Venturi system that draws media into the airflow and ejects it at high speed from the blasting nozzle. The Büffel cabinet is also available with an integrated filtration system, which helps reduce dust and improve air quality during the blasting process. Heavy components can be loaded easily via the front flap using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our powerful sandblasting cabinet "MM 2010" operates using the pressure blasting method and is suitable for all types of blasting media thanks to its innovative media recirculation system. The bucket elevator, which is firmly connected to the blasting cabinet, allows even the heaviest media types, such as stainless steel shot, steel cast grit, and other metallic abrasives, to be used without issue. Unlike competing systems, the abrasive is not vacuumed back but transported to the adjacent bucket elevator using a flat conveyor system. The bucket elevator lifts the material upwards and deposits it into the cyclone separator, where the blasting media is cleaned and returned to the blasting process. Our specially developed blasting media recirculation and recycling system ensures continuous abrasive supply regardless of the extraction system’s suction capacity. Thanks to the recirculation system for blasting media and innovative fan technology, the blasting cabinet features very low energy consumption (0.75 kW fan motor). Because the abrasive is not vacuumed back, there is no need for an oversized dust extraction system with high power consumption, as is required by many competing systems. For maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60-liter pressure vessel. This vessel includes a pressure regulator for infinitely adjustable blasting pressure, ranging from 0.1 to 12 bar. For safe operation, a water separator is permanently installed on the blasting pressure vessel, protecting the blasting media from moisture. The pressure blasting nozzle is made from highly wear-resistant boron carbide, enabling service lives of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which enhances the service life of the blasting media and protects the cabinet from wear. An air blow gun is installed for cleaning blasted workpieces and the interior walls of the cabinet. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber and maximum service life for the blasting media. The dedusting unit features continuous filter cartridge cleaning by means of pulse-jet compressed air, ensuring long filter service life and consistently stable extraction performance in the long term. Loading of the blasting chamber is carried out via an angled front flap which swings fully upwards, allowing loading by forklift or crane. The robust working grating supports up to 500 kg. Godpfswc Nrnsx Adkebr To ensure optimal visibility inside the chamber, two powerful and energy-saving LED lights are mounted on the cabinet roof, dust- and wear-protected by their rooftop installation. The system is operated via a modern touch display. For safe operation, the blasting cabinet is fitted with a door safety switch. The installed viewing windows are made of toughened safety glass (ESG) and protected with a wear-resistant film.