Sistem Za Oblaganje nakup rabljenega (86.482)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, TPS/Miller/Keyplant 6m sistem za navarjanje (cladding) cevi Dvojna varilna glava z avtomatsko kontrolo višine obloka (AVC) Varilni izvori Miller Maxstar 700 Varilni izvori za vročo žico Miller Maxstar DX 200 Nov težko-obremenljiv sistem za vodno hlajenje (chiller) Dusdpfx Aou Hfkmof Sjr Težko-obremenljiv pogonski vrtljivi nasadni glavni ležaj s prehodno izvrtino Vpenjalno območje za premer cevi: 150 mm – 750 mm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW Djdpfx Aoyxndbjf Sour EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: rabljeno, OTT Tornado - TOP Upravljanje - preko 15-palčnega barvnega zaslona na dotik za popolno avtomatizacijo in najvišje udobje upravljanja CM-CombiMelt lepilni sistem, primeren za obdelavo EVA in PUR talilnih lepil ter vseh običajnih čistilnih granul Enota za spajanje za dodajanje ivernih plošč Samodejni ročni magazin Samodejni magazin za robove Dodpfx Aeyym Dcef Sjur Dvojni odrezovalni stroj z avtomatskim vrtenjem 0° / 3° Poravnalni rezkalnik za poravnave – 12 mm Fina rezkalna enota RADIUS – rezkanje radijev – profilna rezila R2 – R5 Avtomatizirano kopirno rezkanje – zaobljenje vogalov Strgalo za robove – radij – posnetje Strgalo za površine Mazalna pršilna naprava – PU Čistilni set s finim polirnim strojem Zelo stabilna podpora za obdelovance z valjčnimi tirnicami – SPREDAJ z izvlekom na škarje Kompletna oprema z orodji vključena Stroj je v IZJEMNO DOBREM STANJU Stroj iz rokodelske delavnice Na zalogi v Liebochu

Stanje: rabljeno, Holz Her Auriga 1308 FÜ + PU Compact design – edge thickness 0.4–6 mm SPS screen control Edge-Control PPC 221, colour display Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU-JET for EVA and PUR adhesives, cartridge or granulate + PU Glue application via nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment Pressing section 1912-3, pneumatic End trimming unit 1918, pneumatic, for coil and strip material up to 8 mm edge thickness With pneumatic adjustment 0–10° tilt for end trimming saws Milling unit 1827 MOT 4, flush trimming 8 mm, radius trimming – chamfer trimming – 15° 1827 MOT NC axes controllable via control panel Corner rounding unit 1832 SPS for rounding corners up to 3 mm edge thickness in throughfeed Scraper unit for chamfers and radii, with 2 MOT scraper holders Dedsyyl U Hspfx Af Sour Flat scraper unit – finish Spray device – PU Complete DIA tooling included Low operating hours / from a craft business Machine is WORKSHOP-OVERHAULED and in TOP CONDITION Available ex-stock Lieboch

Stanje: dober (rabljeno), Leto izdelave: 2012, skupna masa: 3.000 kg, leto zadnje generalne obnove: 2025, Oprema: CE označba, - HOMAG KAL211 EDITION 2264 Leto izdelave: 2012 PREGLED AGREGATNE OPREME: - Krmiljenje power Control PC22 - Zgornji pritisk povezovalnega klinastega jermena - Pomik 18 - 25 m/min - Debelina obdelovanca 60 mm namesto 40 mm - Skupna dolžina 7845 mm - Elektronska višina FPR/L260+EDITION+FSQ - Hitro-vpenjalni sistem za nanosno enoto QA/PU - Enota za razprševanje ločevalnega sredstva zgoraj/spodaj - Lepljenje rezkalna enota - Lepljenje del A20 z Quickmelt nanosno enoto - Ročni magazin 2 roli - Priprava za Lasertec aktivacijsko enoto - Obočni agregat HL84 poševno/ravno - Avtomatizacijski paket faza/polmer AMB/EDITION2264/74 - Predrezkalna enota BF10 1,5 kW - Oblikovna rezkalna enota FK11 ročna - Profilni strgalnik PN10 - Finish agregat - Strgalnik za lepilne fuge - Polirni agregat Duedpfx Aeyz Dbbef Ssr - Sušilna komora z dušikom

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, 12 pasaž i valjčni mlin buhler-miag Celotna čistilnica Dsdeyyqwmspfx Af Sour Delovanje 1t/h pšenice

Stanje: rabljeno, OTT Tornado FÜ + PU SPS-Comp. krmiljenje, 7" TFT barvni zaslon na dotik CM-CombiMelt za EVA in PUR talilna lepila Enota za predrezkanje - spajanje Popolnoma avtomatski valjčni magazin Popolnoma avtomatski magazin za robove Pnevmatsko poravnavanje 0-3° Poravnalno rezkanje - 12 mm Radialno rezkanje R-2, R-5 Posnemanje robov 0°/15°/30°/45° Zaobljanje vogalov Radialni strgalnik Površinski strgalnik Zvočno izolirana kabina z odsesavanjem Dsdpfsywuvnjx Af Sour Čistilni komplet s štirikratno pršilno napravo, finim polirnim strojem in pršilno napravo za mazivo Prva dostava 2006 Stroj je DELOVNO PREVERJEN, v VRHUNSKEM STANJU Na zalogi v Lieboch

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Dodpeywh Epjfx Af Sour Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Holz Her UNO 1303 + PU Debelina robnega traku 0,4 - 3 mm (6 mm) Upravljalna plošča s preklopnimi stikali za nastavitev agregatov Popolnoma avtomatski robni magazin za rolo in trak Lepilna postaja: kartuše + PU lepljenje Višina obdelovanca 6-55 mm Pritisk pnevmatski Rezkalna enota za rolo in trak do 3 mm (6 mm) debeline Nastavitev od 0-10° nagiba žage za rezanje Rezkalna enota za poravnavo, radije, posnetje - 15° Enota za vlečne rezila za posnetje in radije Dujdpjywh A Iofx Af Sor Enota za površinsko vlečno rezilo - končna obdelava Stroj je PREVERJEN, V VRHUNSKEM STANJU iz zelo vzdrževanega obrtniškega podjetja Na zalogi v Liebochu

Leto izdelave: 2015, stanje: rabljeno, Delovna dolžina 1.500 - 6.000 mm Duedpjyz Df Tsfx Af Sjr Delovna širina 50 - 200 mm Delovna višina 20 - 100 mm Maks. teža sloja 450 kg Maks. velikost zloženega sklada 6 x 1,2 x 1,35 m Paternoster avtomatski sistem za zlaganje, razlaganje ali avtomatizirani izhod Sicko Tip X-Stacker za samodejno zlaganje obdelovancev po skobljalnih linijah. Sistem je zasnovan za neprekinjen pretok materiala in omogoča oblikovanje slojev in paketov v večih fiksnih dolžinah. Idealen za racionalno razlaganje lesenih obdelovancev. Sestavljen je iz dovednega valjčnega transportnega traku za skobeljne stroje v dolžini 10,3 m, enote za zlaganje ter valjčnega transportnega traku (zaloga) po zlaganju dolžine 7 m. Tehnične podrobnosti na zahtevo. Na voljo je tudi celotna skobljalna linija, skobljalni stroj ali Weinig High-Mech avtomatski podajalni magazin.

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Ključne značilnosti: Model: K 800R Kapaciteta: 1 enota, neto teža 2.472 kg Namen: lepljenje robov in obdelava lesenih ter plastičnih komponent za pohištveno industrijo Standardi: skladen z evropskimi varnostnimi predpisi (CE certifikat) Oprema in dodatki: AVTOMATSKI ENOSTRANSKI ROBNI LEPILNI STROJ Evropski varnostni predpisi (CE norme) Sestava Olimpic K 800 "T-ERL" (47) Napetost 400 V EU Frekvenca 50 Hz "AUTOSET" za sestave ER2, T-ERS in T-ERL Elektronsko upravljanje "StarTouch" namesto "Touch 7" Distančnik panelov na dovodni ograji Elektronsko pozicioniranje zgornjega pritisnega mehanizma Horizontalni pomik enote za čelno rezanje "K-SEL" Strgalna enota robov RAS/S 2P Protizlepilna enota "AAR" Naprava "EASY SIZE" Senzor za zaznavanje robov Komplet "IGLUE" za lepilno enoto Dsdpfx Afoyxcbhj Seur Lepilni kotel "SGP" z ročnim doziranjem namesto standardnega Pnevmatski komplet z 2 pozicijama za obrezovalno enoto RI/800 Pnevmatski komplet s 3 pozicijami za obrezovalno enoto RI/800 Razpršilna naprava (meglica) za občutljive robove Strgalna enota za lepilo "RCA/2C" Krtačna enota "SPN" Strgalna enota robov z radijem = 1 mm Strgalna enota robov z radijem = 2 mm Leseni bloki

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, For sale due to closure of a craft bakery: a WP roll production line, year of manufacture 1995. Installed upstream is a WP Multimatic, a proofing cabinet (retarder/proofer), and a WP stamping station. Dujdpfx Asuqw Dref Ssr Please note: The dismantling of the equipment must be carried out by the buyer.

Stanje: rabljeno, Machine d'occasion Petite machine pour l'usinage de pièces formées Traite des matériaux de chant revêtus d'une colle thermofusible, qui est réactivée à l'aide d'air chaud L'avance de la pièce est automatique par pression contre le rouleau presseur central motorisé, assurant ainsi une réactivation régulière de la colle et une fiabilité de collage Régulation de température thermostatique avec thermostat à aiguille Soufflante à air chaud triphasée, sans entretien, pour fonctionnement continu Duedowwxykjpfx Af Sor Déviation automatique du flux d'air Dispositif de séparation de rouleau actionné pneumatiquement, coupe même les chants de placage et PVC les plus résistants Commande par pédale pour l'usinage de pièces formées Épaisseur de pièce : 10 - 50 mm Puissance de chauffage : 3 kW Puissance raccordée : 3,3 kW Largeur minimale de la pièce : env. 25 mm Épaisseur des chants : env. 0,5 - 1 mm Rayon intérieur minimal : env. 25 mm Avancement : 4 m/min Pneumatique : 6 bar Poids : env. 105 kg Disponibilité : court terme Emplacement : Röllbach

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, hitrost pomika os X: 30 m/min, model krmilnika: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Duodpfxeyzy Iwe Af Sjr Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Magazine for roll material Hot melt glue tank Edge pressure roller unit Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Stanje: rabljeno, Leto izdelave: 2014, with joint milling unit including DIA tools, jointing capacity up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical description: - Hot-melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end trimming station (16,000 rpm) for front and rear protruding edges - HF milling station (16,000 rpm) with interchangeable cutter heads (combination version) and fine adjustment accessible from the operator side - Spare spaces for additional machining units (Hebrock system) - Feed approx. 10 m/min - Cutting depth adjustment for end trim saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double pressure roller top beam - Viewing windows on both rear and operator sides - PLC control including touchscreen Technical data: - Feed speed: 10 m/min - Panel thickness: 8–40 mm - Weight (depending on configuration): approx. 1,400 kg - Dimensions (L x W x H): 5,000 x 1,445 x 1,600 mm Airtronic for machines up to 8 mm edge thickness, 1 piece Technical data: - Edge thickness: 1.2–3.0 mm possible - Maximum panel thickness: 25 mm - Feed speed: 7–10 m/min depending on edge material - Ready for operation: 3 min - Air consumption: approx. 800 l/min for entire machine - Electrical connection: max. 32 A / 16 kW for entire machine, higher connection required with grooving saw - Extraction as usual - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 piece, up to max. 40 mm workpiece thickness Including pneumatic saw adjustment, separate pneumatic cutter adjustment, 1 piece, controllable from the operator panel (straight/radius) Buffing station (polishing wheel), 1 piece Corner rounding unit, 1 piece, incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 piece, incl. pneumatic lift-off device Radius R 2.0 mm Surface scraper, 1 piece, with pneumatic actuation Glue pot quick-change system prepared, 1 piece, without second glue pot—inclusive option for PU glue processing with the machine, without downward glue outlet device Special cleaning system for PU glue outlet downward, 1 piece 60 mm panel thickness for machines w/ jointing, 1 piece - Max. workpiece thickness with jointing unit: 60 mm - Jointing range at 40 mm–60 mm - Workpiece thickness up to 2 mm Dujdpfxeyfp N De Af Ser Special infeed fence for overlaid panels, 1 piece, 16 mm and 19 mm thickness - Max. overlay protrusion: 8 mm Separate extraction for jointing unit, 1 piece, directly on the jointing unit, vertical upwards, d=80 mm for optimum extraction - Highly recommended from AKV 3005 DK-F Ball bearing for corner rounding unit, 24.1 mm, 1 piece Ball bearing for corner rounding unit, 24.2 mm, 1 piece Nesting for combination milling unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Nesting for radius scraper unit, 1 piece - For processing workpieces with hinge cup drillings - Only possible on underside of workpiece Release agent spray unit, 1 piece Cleaning agent spray unit, 1 piece, for easier removal of adhesive residue Antistatic spray unit, 1 piece - Mandatory for airtronic - Before the combination milling station, antistatic coolant is sprayed onto the inside of the edge overhang Storage location: Supplier

Stanje: rabljeno, Funkcionalnost: nepreverjeno, skupna višina: 1.800 mm, skupna dolžina: 9.500 mm, Debelina robnega traku: 0,3 - 30 mm Djdpfxeyzn Tbj Af Ssur Maksimalna višina robu: 66 mm Minimalna širina obdelovanca: 60 mm Minimalna dolžina obdelovanca: 140 mm Debelina obdelovanca: 6 - 60 mm

Stanje: dober (rabljeno), Peskalna naprava z steklenimi kroglicami, z odsesovanjem in reciklažo abraziva Dodpfx Afsyzalpe Ssur

Stanje: rabljeno, Leto izdelave: 2016, Central pneumatic valve island with bus control. Optimized maintenance unit with pressure sensor. Additional control air supply and pressure build-up valve. Chain feed with 2 speeds: feed speed 12 and 20 m/min. Drive motor 2.2kW (S6). Minimum workpiece length 140mm. Minimum workpiece width varies depending on workpiece length, height, and surface properties. 20 m/min feed only possible up to max. 3 mm edge thickness and max. 25 mm workpiece height. When the corner rounding unit is activated, the speed automatically reduces to 12 m/min. Segmented, rubberized support pads with quick-change system. The minimum workpiece width varies depending on workpiece length, height, and surface properties. Electrically: 3x400V 50Hz. If a residual current circuit breaker (FI) is fitted upstream of the machine, it must be an all-current-sensitive residual current circuit breaker, type B, suitable for frequency converter operation, with a trip current of 300mA. End position damping for crosscut saw unit. Jointing unit with plunge-controlled diamond cutters. Speed 12,000 rpm, 4.4kW, max. chip removal 3 mm. Jointing cutters with diamond blades Z2+2, D-60 x 64 mm. e-Motion control. Pull-out frame for tempora 60.12. Machine frame tempora 60.12: The machine frame of the edge bander tempora 60.12 is made of thick-walled, electro-welded steel construction. The ribbing inside the frame provides high stability. Pneumatic-mechanical infeed lock for workpiece distance monitoring. A pneumatically controlled steel bolt prevents the insertion of workpieces until the minimum workpiece distance is reached. Prepared for retrofitting a premelter. Operating tools tempora series. Workpiece feed and feed fence: the feed support surface is implemented as a roller conveyor for sensitive surfaces. The robust feed fence is 1100mm long. The chip removal for the jointing unit is electrically position-controlled from 0–3mm at the feed fence, and display is via the e-motion control. Upper pressure beam tempora 60.12E: Press beam made of welded, torsion-resistant steel construction. Motorized height adjustment for workpieces from 8–60mm via e-motion control. Smooth, double-row offset arranged upper pressure rollers ensure uniform pressure distribution on the workpiece. Workpiece distance monitoring with indicator lights. Application of release agent. Cutter configuration 60mm Z3+3 "whispercut" tempora series. Reverse function for glue application roller. 50Hz turntable edge magazine for roll edge material 0.4–3mm. Ball-bearing turntable for roll edging material, diameter 800mm. Strip magazine for 12 pieces of 10mm edges. Perfect 608, maximum edge thickness 8mm. Edge feed for roll and strip material, tempora series. Corner processing unit with motorized adjustment for post- and softforming profiles. Application-controlled profile milling unit for machining of end edges. Edge thickness and workpiece height 10–60mm. Min. workpiece length 270mm. Processing of solid wood edges possible depending on edge material. Limitations with loose intermediate layers in post-/softforming parts and extremely thin melamine/foil edges and surface materials. Pneumatically controlled, Teflon-coated glue unit for 1.5kg EVA granulate with synchronized glue roller and quick-change system. Suitable for PUR adhesive processing, taking adhesive handling requirements into account. Dodpsyx Iwbsfx Af Sour

Stanje: rabljeno, Leto izdelave: 2018, Technical data: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz + N + PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine height at 1.6 m: n/a Vibrations: none Duedpfowf U Ruex Af Sor Maximum payload: 200 kg Washing tank: 900 l Rinsing tank: 900 l Oil separator: 200 l

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Spray cleaning system – parts washer – NEW UNIT / Pilot plant system Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Usable height: 900 mm Maximum load weight: 600 kg Tank capacity: 500 liters, spray pressure: 5 bar, 400 l/min, heatable up to 90°C System constructed entirely from stainless steel 1.4301 (AISI 304), pickled throughout Incl. loading cart in front of the unit Included special equipment: - Steam extraction incl. condensate return - Automatic water refill and level monitoring - Removable coarse filters in return line to wash tank - Detachable basket surround - Prepared for retrofitting an oil separator - Weekly timer for heating Djdpewitvqsfx Af Ssur - E-spray tube for improved component cleaning - Inspection hatch in tank area - Siemens S7 1200 controls with color touch panel by Weintek Commissioning by qualified specialists can be arranged at additional cost upon request.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Spray Cleaning System – Parts Washer with Hinged Door 1-tank configuration (washing), tank volume 320 liters Basket: LxW 1,100 x 1,100 mm Usable height: 800 mm Max. loading weight: 700 kg Washing pump pressure: 4.3 bar, pump output: 5.5 kW Heating (electric): 20 kW; heatable up to 80°C Control: Siemens Logo including – Steam extraction and condensate return – Automatic water refill – Automatic chemical dosing (0.8 – 5.5%, adjustable) – Full system insulation – Entire unit constructed from stainless steel 1.4301 – Basket surround (removable on one side) – 7-day timer for electric heating – Electric spray tube h = 450 mm – Preparation for oil separator (electric and mechanical) available Djdsd Rkmxspfx Af Ssur New machine; currently in use for washing tests at our technology center

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Spray Cleaning System - Parts Washing Machine - NEW SYSTEM / Pilot Plant Basket usable dimensions: L x W 1,100 x 1,100 mm Usable height: 800 mm Max. load weight: 700 kg Dedpfxec Udkbj Af Seur Tank volume: 320 liters, spray pressure: 4.3 bar, heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304), pickled by immersion System incl. loading trolley positioned in front of the unit Included special equipment: - Steam extraction incl. condensate return - Automatic water refill and level monitoring - Filter unit (coarse filter) in return line to the wash tank - Preparation for retrofitting of oil separator - Weekly timer - Electric spray pipe for optimized component cleaning - Inspection hatch in tank area - Siemens Logo control unit with color touch panel (4.3") Commissioning by qualified personnel can be arranged at additional cost on request.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type L90 Fully automatic hot water parts washer with basket drive via gear motor, stainless steel washing pump (manufacturer: Lowara), three-sided circulating spray system with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Maximum load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electronically adjustable (RT - 90°C) - System dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm - Empty weight: approx. 220 kg Washing timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and exterior casing) made from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Complete system (tank and cabin) insulated with stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2,000 micron) Intake filter for pump protection Operating hours counter Steam extraction system with condensate return The parts washer is as-new (test facility/laboratory setup) Duedpfxjd Ryxco Af Sjr OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Stanje: novo, Leto izdelave: 2026, Spray Cleaning System Type SM11 Robustly constructed parts cleaning system with basket drive via gear motor, made of stainless steel 1.4301, - Three-sided stainless steel nozzle system, incl. stainless steel flat-jet and spot-jet nozzles - Automatic steam extraction fan Duedpfx Aopm Ed Eef Sjr - Fine filter incl. pressure gauge (size 4) - Coarse filter (removable basket) in the return flow - Oil skimmer for bath maintenance - Timer for adjustable wash cycle - Electronic lid monitoring - Stainless steel wash pump (manufacturer: Ebara) - Level sensors / dry-run protection - Drain connection with ball valve - Basket diameter: 1,100 mm - Usable height: 700 mm - Max. loading weight: 250 kg - Spray pressure: 3 bar - Tank volume: 260 liters - Heating: electrically adjustable (RT - 75°C) - Connected load (electric): approx. 12.5 kW - Machine dimensions (WxDxH): 1,500 x 1,600 x 2,500(h) mm (with lid open)

Stanje: novo, Leto izdelave: 2026, Spray Cleaning System Type SM11 Dsdpfxoq T H Sio Af Sjur Heavy-duty two-tank parts cleaning unit (washing + rinsing) with basket drive via gear motor, constructed from stainless steel 1.4301. - Three-sided stainless steel nozzle systems including flat and spot-nozzles made of stainless steel - Full system insulation - Automatic steam extraction fan - Side channel blower with air knife for parts drying - Oil skimmer for bath maintenance in the washing tank - Automatic fresh water refill for both tanks - Timer for washing cycle setting - Electronic lid monitoring - Coarse filter (removable basket) per tank on the return line - Washing pumps made of stainless steel (Manufacturer: Ebara) - Level sensors / dry run protection - Drain connection with ball valve Control system: Siemens Logo - Basket diameter: 1,100 mm - Usable height: 700 mm - Max. load weight: 250 kg - Spray pressure: 3 bar - Tank volume tank 1: 260 liters, tank 2: 140 liters - Heating: electronically adjustable (room temp. – 75°C) - Connected load (electrical): approx. 20 kW - System dimensions (WxDxH): 1,800 x 2,000 x 2,350(h) mm (with lid open)