Oprema za prašno lakiranje

ROMER Malowanie elektrostatyczne

7-inch Touch Panel
The large color touch panel makes parameter input even easier and more convenient.

5 Programs with 50 Steps Each
You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes.

Information on Gas and Oil Consumption
Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process.

USB Storage
Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros.

Storage of the Last 20 Firing Processes
Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred.

New! Timer Function
It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins.

Made by Professionals for Professionals

Automatic Smoke Extractor
The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel.

Process Duration Timer
Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display.

Self-Closing Doors
To open, simply pull the door. To close, just push it—the door will close automatically.

Exhaust Hood Over the Door (optional)
To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air.

Partition Wall (optional)
The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls.

2-in-1 (optional)
It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.
Hjdpfx Abefzkrne Eefd

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.