Kabina za prašno lakiranje

ROMER KPD 3

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor Ffedpfx Ajfz A Ileflot The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Charmilles Millenium control system Ffedpsuuz Iiefx Aflot Travel (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1450 x 900 x 510 mm Max. workpiece weight: 3000 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg capacity (K250) Overall system dimensions: 2670 x 2870 x 2645 mm Total weight of system: 6300 kg The machine will be cleaned, fully overhauled, and tested for all functions upon receipt of order. Options: - Commissioning of the machine at your facility - On-site training - Cooling unit - Transport - Clamping bar set

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning Ffsdofz I Ehopfx Aflst The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, Stanje: novo, ROMER cabins are equipped with 4" color touchscreens. The cabin operation is intuitive and can be set in 3 modes: automatic (timer-based), automatic (based on a clogged filter sensor), or manual. Ffsdofzkzhepfx Aflot Automatic Filter Cleaning The electronic system for automatic filter cleaning allows you to set both the cleaning frequency and the ignition timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the push of a button. We know from experience that it is difficult for operators to ensure filter maintenance. With this intelligent system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74–79 dB – that's not much. Even with a standard cabin configuration, it is difficult to hold a conversation. Browse through the cabin By pulling the lifter beams within the cabin, work efficiency is increased and the painter is relieved of the need to move them manually.

Leto izdelave: 2019, Stanje: novo, Model: KPZ-4P Fjdpfjbxmfnsx Afloft Type: Enclosed Working dimensions: 3500 W x 1800 H x 1000 D mm External dimensions: 3300 W x 2300 H x 1800 D mm Operation: Electric Power: 2.75 kW Voltage: 380 V Frequency: 50-60 Hz Filters: 6 pcs Filter type: Polyester Filter cleaning: Jet Venturi Filter area: 22.5 m² Fan: Aluminium Fan noise level: 74 dBA Air consumption: 20,400 m³/h Warranty: 12 months

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Fsdpfefz A Iwsx Aflsft Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, Stanje: novo, Touch-Auslösung löschen Die ROMER-Kabinen sind mit 4-Zoll-Farb-Touch-Bedienfeldern ausgestattet. Die Kabinensteuerung ist intuitiv und in drei Modi verfügbar: automatisch (temporär), automatisch (über einen Plug-in-Filteradapter) oder manuell. Filterstecker-Sensor Die Kabinen sind mit einem Sensor ausgestattet, der den Anwender informiert, sobald die Filter wegen Verstopfung gereinigt werden müssen. Das System meldet ebenfalls, wenn die Filter bereits im Einsatz sind. Automatische Filterreinigung Das elektronische System zur automatischen Filterreinigung steuert sowohl die Reinigungsintervalle als auch den optimalen Reinigungszeitpunkt. Jeder Filter wird individuell gereinigt; die Filter können bei Bedarf auch manuell mit einer Druckluftpistole gereinigt werden. Aus Erfahrung wissen wir, dass es schwierig ist, den Bediener regelmäßig zur Filterreinigung aufzufordern. Dank des automatischen Systems muss der Bediener hier nicht eingreifen oder die Produktion unterbrechen. Niedriges Geräuschniveau Die Aluminiumlüfter arbeiten sehr leise mit einer Lautstärke von 74–79 dB – das reicht nicht aus, um zu stören. Selbst bei der Standard-Kabinenkonstruktion ist es schwierig, sich innerhalb der Kabine zu unterhalten. Durchgehende Kabinen ("overhung squirrel cage") Die Kabine mit überhängenden Lüfterkäfigen trägt zur Produktivitätssteigerung bei, da die Lackierer sie nicht mehr manuell bewegen müssen. Vorratsfertiger Aufbau ist möglich. Fedpfx Afsfzciqeljft Explosionsschutz Die übrigen Kabinenkonstruktionen verhindern, dass sich während des Lackierprozesses explosionsfähige Gemische bilden. Jede Baugruppe wurde sorgfältig ausgewählt, um dieses Risiko wirksam zu minimieren.

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: Ffjdpfxsiyyndj Aflst > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Leto izdelave: 2020, Stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. Ffsdpfxsflk Awo Afljt 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Stanje: novo, Leto izdelave: 2024, pritisk: 8 letvica, Horizontal mitre adjustment 15°–90°15°, stepless Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Travel range rear stop 180 mm Working height 940–1000 mm, adjustable via feet 2 x extraction ports (top of hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary table made from ground nickel steel Saw head with recirculating ball guides, designed for high accuracy, long service life, and high rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed Chip flow directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, stepless • Incl. 2 pneumatic vertical clamps • Infinitely variable saw blade feed rate • Two-hand safety control • Adjustable rear material stop • Chip extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air pistol with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600 mm • Saw blade not included in delivery! Our NC pusher system ensures your workpieces are positioned at the desired working position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions it. Afterwards, the clamping and sawing process is activated. Positions are pre-programmed in the control system. Once the machining operation is completed by the machine, it automatically moves to the next sawing position. Depending on the workpiece, multiple parts can also be clamped and positioned simultaneously, stacked or side by side. Ffedpfx Asgwt S Teflet You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH