Kabina za prašno lakiranje

ROMER KPD 3

Leto izdelave: 2026, stanje: novo, ROMER cabins are equipped with 4" color touchscreens. The cabin operation is intuitive and can be set in 3 modes: automatic (timer-based), automatic (based on a clogged filter sensor), or manual. Automatic Filter Cleaning The electronic system for automatic filter cleaning allows you to set both the cleaning frequency and the ignition timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the push of a button. We know from experience that it is difficult for operators to ensure filter maintenance. With this intelligent system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74–79 dB – that's not much. Even with a standard cabin configuration, it is difficult to hold a conversation. Browse through the cabin Itedpefzkzhsfx Al Nof By pulling the lifter beams within the cabin, work efficiency is increased and the painter is relieved of the need to move them manually.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Itedpofz U S Esfx Al Nef Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Iedpfxjfz A Ils Al Njtf Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. Itsdofzktzepfx Al Njf We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: novo, Load capacity 500 kg Number of suction cups: 6 Diameter of suction cups: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing structure made of steel, painted in RAL 2000 with low dead weight. Consisting of: - 1x Galvanized longitudinal beam, length 2,400 mm - 3x Galvanized crossbeams, each 1,000 mm in length - 6x Spring-mounted, articulated, and adjustable suction cup holders - 6x Suction cups Ø 215 mm; in case of wear, the sealing ring can be replaced separately from its metal carrier, cost-effectively and without tools - 6x Ball valves for individually shutting off each suction cup, enabling smaller formats to be lifted without moving the suction cups or beams - 1x Spiral connection cable, small coil: * extendable to 3,500 mm, version as extension cable with CEE plug and coupling * routed next to the load chain to the hoisting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and there is no neutral conductor) - Extendable operator handle to 1,000 mm from beam center. Sturdy metal pouch for your crane control included at no extra charge. - Operation "Suction / Release" via manual slide valve: Wear-free and highly robust manual slide valve for safe suction and release after pressing the release button (double-action release according to EN 13155) Itedpjq Sc Auofx Al Nef - Control and safety unit for vacuum lifter: * Robust control box * Contactor circuit for the vacuum pump * Safety warning device with audible signal * Vacuum gauge with danger zone indication * Large vacuum reservoir with safety non-return valve * Double-action operation for load release - Fine dust filter to protect the vacuum pump - Comprehensive and easily understandable documentation - Warranty on material and manufacturing defects: one year in single-shift operation (excluding wear parts) Initial inspection according to UVV 18, VBG 9a with CE declaration of conformity according to EN 13155 - Packaging suitable for truck transport.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin Iodpfx Asfz I Ehsl Nstf The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Iodpefz A Iwsfx Al Njtf Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 33.318 h, stiskalna sila: 87 t, skupna širina: 1.800 mm, skupna višina: 2.840 mm, skupna masa: 8.300 kg, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, največja dolžina izdelka: 3.020 mm, število osi: 6, Ta 6s TRUMPF TruBend 5085 je bila izdelana leta 2012. Z zmogljivostjo stiskanja 850 kN in dolžino upogibanja 2.210 mm je primerna za različne aplikacije upogibanja. Zahvaljujoč upravljalni površini Touchpoint TruBend omogoča enostavno uporabo. Izkoristite priložnost za nakup te upogibne stiskalnice TRUMPF TruBend 5085. Za več informacij nas kontaktirajte. • Obratovalne ure: stroj 33.318 h; hidravlika 15.786 h • Svetla višina: 1.750 mm • Uporabna vgradna višina: 385 mm (opcijsko povečana: 615 mm) Iodpfxsyhp Ede Al Njtf • Globina izreza: 420 mm • Upravljalna površina: Touchpoint TruBend • Največja hitrost osi Y (delovni korak, opcijsko): 25 mm/s Tehnične specifikacije Dolžina upogibanja: 2.210 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 3.454 h, • Press force: 1000 kN • Bending length: 3060 mm • Usable installation height with manual or hydraulic tool clamping (Option: Increased installation height): 350 mm (500 mm) • Usable installation height with TRUMPF Quick Clamp (Option: Increased installation height): 430 mm (580 mm) • Max. distance between the lower edge of the press beam and the upper edge of the machine table (Option: Increased installation height): 470 mm (620 mm) • Tilt adjustment of pressing beam: ± 6.5 mm • Free distance between uprights: 3384 mm • Table width: 100 mm • Working height¹: 1049–1069 mm Speeds • Y rapid traverse²: 200 mm/s • max. Y working stroke³: max. 15 mm/s • Y-axis return: 200 mm/s • X-axis: 500 mm/s • R-axis: 200 mm/s • Z-axis: 1000 mm/s Positioning accuracy • Y-axis: 0.01 mm • X-axis: 0.05 mm • R-axis: 0.1 mm Isdpsyfxdwofx Al Nstf Stroke and backgauge zones • Y-axis stroke (Option: "Increased installation height"): 200 mm (350 mm) • X-axis travel: 600 mm • max. backgauge zone in X-direction: 860 mm • R-axis travel: 150 mm Control • Standard: T3500T Multi-Touch Control Electrical values • Connected load (IEC): approx. 20 kVA Dimensions and weights • Footprint (length x width): 3607 x 1644 mm • Height (Option: Increased installation height): 2370 mm (2700 mm) • Weight (Option: "Increased installation height"): 7700 kg (8300 kg) Paint / Color scheme • Basic structure: White = NCS S 0505 R80B • Blue = approx. RAL-Design 250 20 20 • Black = RAL 9005; Silver parts with RAL 9006 Equipment Extended machine equipment BendGuard: – Optoelectronic safety device enabling fast and safe bending. – The maximum Y rapid traverse speed is not limited in pure foot mode. – Tool height can be set simply and quickly with rack solution and weight compensation. – BendGuard can be easily retracted for side tool changes without refitting. – BendGuard is insensitive to shocks (dismounting), as the housing electronics are not connected. Table consoles (2 pieces): – Table consoles adjustable manually in Z and R directions, with quick clamping. – Facilitate handling of large and heavy workpieces and can be used as a storage surface for finished parts. – Load capacity: 70 kg per console. LED work area lighting front and back: – Excellent illumination of the interior and working area in front of the machine. – Modern LED technology: energy-saving, does not heat up, and extremely long service life. DXF import: – DXF drawings can be loaded into the 2D control.

Stanje: dober (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test Chamber Volume: 450 liters Max. Load Capacity: 100 kg Brine Reservoir: 180 liters External Dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test Chamber Dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion Testing: Salt Spray Test: Chamber temp. up to +50°C Condensation Water Test: Chamber temp. up to +45°C Humidification: +75°C Temperature Stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combinations: Salt Spray Test SS: DIN 50021 Condensation Water Test KFW: DIN 50017 Standard Climate (Ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and correction!) Iodpfsudvg Rsx Al Notf For further questions, please feel free to contact us by phone.