Varilnik kolkov

Jungbauer SWS CD26

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg Klsdpfx Afoxddamo Njl On-site inspection is possible.

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: KASTO Model: KASTOtec A4 Year of manufacture: 2001 Specifications Metric / US Standard Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed range: 0 - 600 mm Kjdpou R R Avofx Af Njll Multi-feed range: 0 - 9999 mm Minimum cut length: 35 mm Maximum cutting speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Approximate dimensions: Length: 4800 mm Width: 2200 mm Height: 2200 mm Weight: 5200 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all critical details.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, obratovalne ure: 17.400 h, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: TRUMPF, model krmilnika: TASC 6000, upogibna sila (maks.): 230 t, delovna širina: 3.230 mm, hod: 445 mm, globina grla: 420 mm, razdalja med stojali: 2.690 mm, vgradna višina: 615 mm, obratovalna hitrost: 10 mm/s, število osi: 6, tip kronanja: CNC krmiljen, kapaciteta rezervoarja za olje: 330 l, potovalna razdalja osi X: 600 mm, nastavitev zadnjega prislona: CNC krmiljen, zadnji prislon: 860 mm, skupna masa: 16.000 kg, skupna dolžina: 4.270 mm, skupna širina: 2.120 mm, skupna višina: 3.200 mm, število podpornih ročic: 2, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, sistem za merjenje kota, varnostna svetlobna zapora, zaščita prstov, Équipement spécial : Ksdpfsx Elxvjx Af Nell + 2 consoles de support à réglage rapide sur guidage linéaire + Système de butée arrière 6 axes (X1, X2, R1, R2, Z1, Z2) avec climatisation de l’armoire électrique + Serrage supérieur hydraulique de l’outil, trempé + Bombage CNC + Préparation pour ACB + Dispositif de sécurité BendGuard pour 200 mm/s Équipement de base : - Concept d’entraînement supérieur à quatre cylindres - Entraînement électrohydraulique du coulisseau avec technologie à valve proportionnelle - Système de mesure de la course du coulisseau - Bloc hydraulique moderne - Balance de pression électronique - Suspension sphérique et inclinaison de la barre de pression - Système de butée arrière CNC - Réglage sécurisé des doigts par l’avant - 2 doigts de butée - Porte-outil supérieur manuel, auto-centrant, trempé, pour changement vertical d’outil - Porte-outil inférieur hydraulique, trempé - Couvercle avant plat - Carters de sécurité modernes - Marquage CE - Refroidisseur d’huile - Refroidissement de l’armoire électrique (air-air) - Notice d’utilisation

Leto izdelave: 2009, Stanje: dober (rabljeno), številka stroja/vozila: 4495678, Offer 18336 Portable TIG-DC welding machine on transport trolley Technical Data: - TIG – DC + electrode welding - Welding current continuously adjustable for TIG welding from Kedpshq T N Dsfx Af Nsll 5 A - 10.0 V up to 150 A - 22 V 35% duty cycle 100 A 100% duty cycle - Power supply 220 V / 50 Hz 15 A - Equipped with: - 2-stroke / 4-stroke function - HF (high-frequency) ignition - Adjustable welding current run-down - Pre-gas and post-gas flow control - 4.5 m torch package, lightweight version - Ground cable - Pressure regulator - Space requirement: approx. W 200 x H 300 x D 500 mm - Weight: approx. 10 kg - Transport trolley with gas bottle holder: W 550 x H 900 x D 560 mm - Weight transport trolley: approx. 10 kg

Stanje: rabljeno, Leto izdelave: 1987, Pressure: 160 t Klodpetqqr Rofx Af Nsl Bending length: 4000 mm Distance between uprights: 3060 mm Control: FORTRON CNC 10 H 4 Throat depth: 280 mm Stroke: 250 mm Installation height: 500 mm Table length: 4050 mm Table width: 280 mm Downward speed: from 70 mm/sec Upward speed: 68.4 mm/sec Working speed: 9 / 3.5 mm/sec Max. operating pressure: 205 bar Oil capacity: 400 l Total power requirement: 19.5 kW Machine weight: approx. 20.8 t Total weight incl. accessories: 22 t Machine dimensions (L x W x H): 4.8 x 1.88 x 2.93 m Control cabinet dimensions: 1.6 x 0.5 x 2.25 m - 3-axis machine - with crowning system - with graphical display Accessories: programmable backgauge, upper and lower tools, table extensions

Stanje: generalkompletno obnovljen (rabljeno), Rated power at 50% duty cycle: 63 kVA Short-circuit current: 31 kA Electrode force: max. 730 daN Weight: approx. 98 kg --- with 800 mm electrode arms --- Welding control B200/MPS10 5-cycle, 8-program --- Spring balancer optional --- Warranty: 6 months Kledpstq E Ahsfx Af Nol --- Training and commissioning available on request --- Spot welding electrodes and spare parts available from stock --- Further information on our website

Stanje: rabljeno, Leto izdelave: 1986, Cutting diameter: 460 mm Saw blade length: 5334 mm Cutting width: 1.3 mm Square cutting range: 320 x 320 mm Flat cutting range: 500 x 320 mm Control: minipos 807 Cutting speed: 16 - 80 m/min Saw blade dimensions: 5334 x 41 x 1.3 mm Feed length: 580 mm Multiple feed length: 5800 mm Ksdpstqqrfjfx Af Nell Total power requirement: 8 kW Machine weight: approx. 3.5 t Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Accessories: 4150 mm roller conveyor, 2150 mm roller conveyor, bundle clamping device, chip conveyor, coolant device

Stanje: dober (rabljeno), Leto izdelave: 1982, Širina pločevine: . mm Delovna širina: 4500 mm Debelina pločevine: . mm Maks. rez: 8 mm Kedpfx Afeq Dta Is Nell Razmak med stojali: . mm Električni zadnji prislon

Stanje: generalkompletno obnovljen (rabljeno), Rated power at 50% duty cycle: 25 kVA Kljdopbbx Tspfx Af Njl Short-circuit current: 22.5 kA Electrode force: max. 600 daN Weight: approx. 51.5 kg --- With electrode arms 170 mm --- Welding control B200/MPS1036 5 times, 1 program --- Spring balancer optional --- Warranty: 6 months --- Training and commissioning available on request --- Spot welding electrodes and spare parts available from stock --- Further information available on our homepage

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Klodpofk E Dzofx Af Nol Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!