Mep Shark 320 Ax nakup rabljenega (120)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
MEP
mali oglas
Dinkelsbühl
479 km
Tračna žaga
MEPShark 280
Klic
Stanje: rabljeno, največja višina reza: 280 mm, MEP Shark 280
with micro-spray device
chip drawer
Blade dimensions: 2950 x 27 x 0.9 mm
Maximum cutting capacity: 280 mm
Maximum vice opening: 280 mm
Vice height: 130 mm
2 cutting speeds
Swiveling cut from 0° to 60°
automatic lowering
manual vice clamping
coolant pump
Lhjdpfswza T Tex Ah Djn
Voltage: 380 V
Width: 900 mm
Depth: 1900 mm
total height in raised position: 1900 mm
Weight: approx. 650 kg
mali oglas
Böblingen
533 km
Tračna žaga
MEPSHARK 282 SXI EVO Metallbandsäge
Klic
Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic]
All MEP models available on request!
Motor power: 1.5/1.8 kW
Vice opening: 285 mm
Blade dimensions: 2950x27x0.9 mm
Weight: 485 kg
Blade speed: 36/72 m/min
Cutting capacity at 0°: 250 / 220x220 / 280x220 mm
Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm
Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm
Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm
Cutting capacity at 60° left:
Description
Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left.
Semi-automatic function:
At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens.
Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button).
Lhsdpfx Ajcgbq Ijh Dsn
Some features:
• New centralized control console on an articulated arm for easy operation from any working position.
• Low-voltage operating panel:
– Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal.
– Display for:
* Diagnostics (user language messages)
* Alarms (alarm cause descriptions)
* Input/output status
* Cut count
* Time used for each cut
* Saw band motor current
* Saw band tension
* Saw band speed
* Numeric display of head position.
• IP55 manual cycle lever (24 V).
• Complete range of special cutting cycles.
• Capability for defining further special cycles for specific applications.
• New-generation, highly efficient, low-energy hydraulic control unit.
• Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing.
• Dual blade speed (36/72 m/min) with control.
• Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min.
• Bow stroke programmable directly from control panel to adapt to the material.
• Clamping device laterally adjustable left and right, with quick-release vice.
• Manual blade tension control with electronic converter and on-screen display.
• Base frame with pull-out coolant tray.
• Electric coolant pump for blade cooling and lubrication.
• Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil.
• Chip removal brush.
• Machine suitable for pallet truck transportation.
• Length stop for repetitive cuts.
• Material support arm with roller, suitable for mounting loading table.
• Bimetallic bandsaw blade for solid and profile materials.
• Tools and user manual included in user’s language.
For further technical data, please refer to the attached PDF document.
mali oglas
Bremen
890 km
Avtomatska tračna žaga - vodoravna
MEP - VOLLAUTOMATSHARK 350 NC HS 5.0
Klic
Stanje: novo, Cutting diameter: 350 mm
Saw blade length: 4640 x 34 x 1.1 mm
Cutting width: 350 mm
Control: NC 5.0
Band speed: 15 - 100 m/min
Cutting range at 0 degrees, round: 350 mm
Cutting range at 0 degrees, square: 350 x 350 mm
Table height: 860 mm
Total power requirement: 4 kW
Machine weight approx. 2.8 t
Shark 350 NC 5.0, automatic hydraulic band saw in double-column design for 0° cuts up to maximum 350x350 mm.
Standard equipment includes:
Lhjdpfjwu Hhdox Ah Den
- Driven chip conveyor, can be installed on either side of the machine
- Clamping pressure regulation for the vices
- Feeder with vertical rollers for lateral material support
- Numerically controlled band saw, can also be operated semi-automatically, featuring the new MEP 50 control system, developed by MEP specifically for automatic machines, Windows "CE" based
- "Clean Cut" cycle: the feeder pushes the workpiece back to avoid scoring at the cut surface when the blade rises again at the end of the cut
- Fieldbus communication system with dual microprocessor and serial connection
- User interface with 7” touchscreen and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters
Scope of supply:
- Shark 350 NC/CNC HS comes as standard with swarf conveyor
- Bi-metal saw band, tool kit
- Mounting adapter for infeed roller conveyor
- Material chute for removal of short offcuts
- Forklift/pallet truck access
Machine available from stock, subject to prior sale

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas
Lemmer
1.004 km
Tračna žaga
MepShark 330HH
Klic
Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity:
280 mm round
330 mm square
Saw capacity at 45º:
250 mm round
250 mm square
Saw speed: 40/80 m/min
Saw blade: 3,320 x 27 x 0.9 mm
Miter angle: 0 - 60º
Equipped with:
Lsdpstt Nd Rofx Ah Dohn
- Coolant system
Country of origin: Italy
Motor power: 1.8 kW
Machine weight: 700 kg
Machine dimensions (LxWxH): 190 x 120 x 135 cm
mali oglas
Goldenstedt
877 km
Horizontalna avtomatska tračna žaga
MEP - VOLLAUTOMATShark 332 CNC-FE
Klic
Leto izdelave: 2003, Stanje: rabljeno, Cutting capacity – Round: 300 mm
Saw blade dimensions: 3320 x 27 x 0.9 mm
Cutting capacity – Rectangle: 330 x 260 mm
Cutting capacity – Square: 260 mm
Control system: Evolution
Lhjdpfx Ajra Rrlsh Don
Working height: 870 mm
Saw blade speed: 40 / 80 m/min
Machine weight: approx. 1050 kg
mali oglas
Niederlangen
930 km
Tračna žaga
MEPShark 281 CCS
Klic
Stanje: novo, Cutting diameter: 250 mm
Saw band length: 2950 mm
Cutting width: 280 mm
Saw band dimensions: 2950 x 27 x 0.9 mm
Lhedpeppgddsfx Ah Djn
Cutting area at 90 degrees - flat: 280 x 200 mm
Cutting area at 90 degrees - square: 230 mm
Cutting area at 45 degrees - round: 190 mm
Cutting area at 45 degrees - flat: 180 x 180 mm
Cutting area at 45 degrees - square: 180 mm
Cutting area at 60 degrees - round: 120 mm
Cutting area at 60 degrees - flat: 110 x 110 mm
Cutting area at 60 degrees - square: 110 mm
Total power requirement: 1.5 / 1.8 kW
Machine weight: approx. 0.4 t
Powerful mitre band saw for cuts from 0° to 60° to the left
CCS (CutControlSystem) for automatic operation. (Infinitely variable feed rate adjustment and automatic shut-off at end of cut)
Description:
-Manual cutting cycle
-AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via counterbalance spring
-Sturdy, torsion-resistant, and low-vibration saw frame made from cast steel
-Quick-release vice
-Carbide blade guides for maximum cutting precision
-Large, adjustable cast steel band wheels
-Hydraulic unit for saw band tensioning and monitoring with manometer display (band tension = 900 kg)
-Clearly arranged control panel with all operating elements
-Electric coolant pump for cooling and lubricating the saw blade
-Chip removal brush for cleaning the saw blade
mali oglas
Böblingen
533 km
Tračna žaga
MEPSHARK 281 CCS
Klic
Stanje: novo, MEP SHARK 281 CCS Metal Bandsaw with Semi-Automatic Descent. Item Number: SH281CCS
Motor Power 1.5/1.8 kW
Throat Opening 285 mm
Blade Dimensions 2950x27x0.9 mm
Weight 375 kg
Cutting Speed 36/72 m/min
Cutting Capacity 0° 250 / 230x230 / 280x200 mm
Cutting Capacity 45° right 190 / 180x180 / 180x180 mm
Cutting Capacity 45° left -
Cutting Capacity 60° right -
Cutting Capacity 60° left -
Description:
- Saw bow, vise unit, and base made from robust cast iron
- Precision angle indicator integrated into the cast iron frame
- Electrical system (with fully identifiable wiring and low-voltage system 24 V)
- IP 55 selector handle for manual operation (where applicable)
- Rotating chip brush for the saw blade
- Quick-closing device with vise for rapid approach
- Precise stops with settings for mitre cuts at 0°, 45°, and 60° to the left
- Bi-metal saw blade 2950 x 27 x 0.9 mm
- Tools, operating instructions, and spare parts list in the user’s language
- SHARK 281 available with manual feed; SHARK 281 CCS with manual operation and automatic cutting via gravity feed
- CCS (Cut Control System) functions: (A) Switch for manual and automatic cut, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for halting the blade – also available as an option for existing machines
- Quick-set vise
- Hydraulic converter for blade tension display
- Electric coolant pump for band lubrication and cooling, with accessible coolant tray above the base frame
- MA versions with pneumatic vise: opening and closing via manual valve (optional pedal control available)
MEP SHARK 281 SXI evo [Semi-Automatic]
Item Number SH281SXI
Motor Power 1.5/1.8 kW
Throat Opening 285 mm
Blade Dimensions 2950x27x0.9 mm
Weight 435 kg
Cutting Speed 36/72 m/min
Cutting Capacity 0° 250 / 230x230 / 280x200 mm
Cutting Capacity 45° right 190 / 180x180 / 180x180 mm
Cutting Capacity 45° left -
Cutting Capacity 60° right -
Cutting Capacity 60° left -
Ljdpfxjcgbp Ie Ah Djhn
Description
Semi-automatic function:
The vise closes and the motor starts, the saw head descends to perform the cut, then the motor stops, the head raises, and the vise opens automatically.
Key Features:
- New, centralized control panel mounted on an articulating arm
- Latest generation hydraulic control unit, highly efficient with low energy consumption
- Base frame with removable coolant tank
The machine complies fully with all CE regulations!
Please refer to the attached PDF document for further technical specifications.
mali oglas
Böblingen
533 km
Tračna žaga
MEPSHARK 331-1 NC 5.0 Spider
Klic
Stanje: novo, MEP Bandsaw SHARK 331-1 NC 5.0 Spider
All MEP models available on request!
Lhedjchhdiopfx Ah Dsn
Motor power: 2.2 kW
Vice opening: 340 mm
Blade dimensions: 3650x27x0.9 mm
Weight: 1,240 kg
Cutting speed: 15 - 100 m/min, steplessly adjustable
Cutting capacity at 0°: 280 / 260x260 / 330x260 mm
Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm
Cutting capacity at 45° left: —
Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm
Cutting capacity at 60° left: —
Description
Fully automatic hydraulic bandsaw
Mitre cuts up to 60° to the left possible
Saw blade length: 3650x27x0.9 mm
Single stroke: 600 mm (programmable up to 10m)
Simple touchscreen operation
Saw arm made from spheroidal graphite iron – robust and stable
Space requirement: 3.4 m²
Footprint: 1900 mm wide x 1800 mm deep
For further technical data, please refer to the attached PDF document.
mali oglas
Böblingen
533 km
Tračna žaga
MEPSHARK 230-1 NC HS 5.0
Klic
Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw
Article no. SH230-1NCHS
Motor power: 2.2 kW
Vise opening: 235 mm
Blade size: 2950x27x0.9 mm
Weight: 1,000 kg
Cutting speed: 15 - 100 m/min, stepless
Cutting capacity at 0°: 230 / 230x230 mm
Cutting capacity at 45° right:
Cutting capacity at 45° left:
Cutting capacity at 60° right:
Cutting capacity at 60° left:
Description:
SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode.
Max. end piece length: 70 mm.
Bundle cutting: 230 x 230 mm.
Numerically controlled saw equipped with the new MEP 50 Windows-based controller.
Material feed via stepper motor and ball screw, mounted on opposing ball bearings.
Single stroke 500 mm – repeatable for any cutting length.
Easy programming – simply enter cut length and quantity, then press "START".
Electronic blade tension control.
Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder.
Blade rotation monitoring with instant stop in the event of a jammed saw blade.
Lhedpochhfuofx Ah Djn
mali oglas
Böblingen
533 km
Tračna žaga
MEPSHARK 350 NC HS 5.0
Klic
Stanje: novo, MEP SHARK 350 NC HS 5.0 Fully Automatic Double-Column Metal Bandsaw
Article number: MEP SHARK 350 NC HS 5.0
Motor power: 4.0 kW
Table opening: 355 mm
Blade dimensions: 4640 x 34 x 1.1 mm
Weight: 2,800 kg
Speed: 15 – 115 m/min, stepless
Cutting capacity 0°: 350 / 350 x 350 mm
Cutting capacity 45° right:
Cutting capacity 45° left:
Cutting capacity 60° right:
Cutting capacity 60° left:
Description:
Automatic hydraulic bandsaw in double-column design for 0° cuts in solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm.
Numerically controlled bandsaw, which can also be operated in semi-automatic mode, with the new MEP 50 CNC controller, specially developed by MEP for automatic machines, based on Windows-2 "CE" technology.
Standard features include:
- Powered swarf conveyor, installable on the right or left side of the machine
- Vise clamping pressure regulation
- Feeder with vertical rollers for lateral material support
- Clamping pressure regulation
Lhjdpoi Hmcdsfx Ah Don
- Storage for 100 programs
- Machine available with 34 mm or 41 mm blade—no extra charge
mali oglas
Böblingen
533 km
Tračna žaga
MEPSHARK 332-1 CCS
Klic
Stanje: novo, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent
Authorized MEP Dealer – Please send us your inquiry!
Motor Power: 1.5 / 1.8 kW
Vice Opening: 335 mm
Lodpjcgbt Rsfx Ah Dshn
Blade Dimensions: 3650 x 27 x 0.9 mm
Weight: 640 kg
Cutting Speed: 40 / 80 m/min.
Cutting Capacity at 0°: 300 / 260x260 / 330x260 mm
Cutting Capacity at 45° right: 260 / 250x250 / 270x200 mm
Cutting Capacity at 45° left: 200 / 180x180 / 200x160 mm
Cutting Capacity at 60° right: 180 / 170x170 / 170x170 mm
Cutting Capacity at 60° left: –
Description – MEP Sawing Machine:
CCS version operating principle: Once the material is positioned and the vices are closed, the cutting cycle is initiated. The descent is performed by gravity, counterbalanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is raised manually to the required position for material feed.
Equipment features:
- Electrical control panel (clearly marked wiring, ready status indicator, main safety switch with provision for padlock, speed switch/selector, emergency stop, thermal-magnetic protection, 24V low voltage system)
- Electronic blade tension converter with display
- Manual vice with quick-clamping
- Base frame with coolant tray and chip drawer (can be replaced by a motorized chip conveyor – optional)
- Electric coolant pump for band cooling and lubrication
- Chip removal brush
- Adjustable precision back gauge for repeatable cut lengths
- Designed for pallet truck transport
- Bi-metal blade for solid and profile material
- Includes tools and user manual
Motor: 1.5 / 1.8 kW
2 cutting speeds: 40 / 80 m/min
Vice opening: 335 mm
Blade: 3650 x 27 x 0.9 mm
Weight: 640 kg
For cutting data, see image.
For further technical details, please refer to the attached PDF document.
mali oglas
Sindelfingen
536 km
Tračna žaga
MEPSHARK 382-1 SXI EVO Metallbandsäge
Klic
Stanje: novo, MEP SHARK 382-1 SXI EVO Metal Bandsaw Hydraulic Semi-Automatic.
MEP Authorized Dealer – please send us your inquiry
Motor power: 1.5 / 1.8 kW
Jaw opening: 385 mm
Blade dimensions: 3770 x 27 x 0.9 mm
Weight: 695 kg
Blade speed: 40/80 m/min
Cutting capacity at 0°: 300 / 250x250 / 380x250 mm
Cutting capacity at 45° right: 260 / 250x250 / 300x200 mm
Cutting capacity at 45° left: 240 / 210x210 / 280x160 mm
Lhedeg Hzxijpfx Ah Dsn
Cutting capacity at 60° right: 180 / 170x170 / 200x170 mm
Cutting capacity at 60° left:
Description
Electro-hydraulic, semi-automatic bandsaw, featuring both manual and semi-automatic-dynamic operation, suitable for cutting from 45° right to 60° left.
Key features:
- Pivoting control panel on vertical support column
- 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts
- Two blade speeds (40/80 m/min)
mali oglas
Szigetszentmiklós
334 km
Hladna žaga
MEPCobra 350 AX automatic saw
Klic
Stanje: rabljeno, Leto izdelave: 2006, MEP Cobra 350 AX avtomatska krožna žaga za aluminij
Pnevmatska vodoravna pritrditev obdelovanca
Pnevmatska navpična pritrditev obdelovanca
Ena linija, 6-pozicijski digitalni prikazovalnik
Nastavljiva globina reza in višina zaustavitve
Možno ročno upravljanje
Stanje: rabljeno
Lhjdpfx Ahoww Ay Io Djn
Območje krožnega reza pri 0° (okroglo): 120 mm
Območje krožnega reza pri 0° (kvadratno): 105 x 105 mm
Območje krožnega reza pri 0° (ploščato): 180 x 170 mm
Območje krožnega reza iz polnega kvadratnega materiala pri 0°: 80 mm
Območje reza pri 45° (kvadratno): 110 x 95 mm
Območje reza pri 45° (ploščato): 160 / 35 – 180 / 20 mm
Območje reza pri 45° z rezalno glavo v levi poziciji (polno okroglo/kvadratno/ploščato): premer rezalnega diska 50/50/160 x 35 mm
Število vrtljajev: 1700 / 3400 o/min
Odpiranje primeža: 180 mm
Premer rezila: 350 mm
Pogonska moč: 3,5 kW
Dimenzije: 2000 x 1000 x 1750 mm
Teža: 600 kg
Dodatna oprema/možnosti:
navodila za uporabo
valji za dolge obdelovance
mali oglas
Madrid
1.639 km
MEP stroj za rezanje in upogibanje SYNTAX 28
MEPSyntax line 28
Klic
Leto izdelave: 2016, Stanje: rabljeno, MEP rezalni in upogibni stroj, SYNTAX 28
Lhsdpfexl Avvjx Ah Den
Enojna palica: Ø10 - Ø28 mm (#3 - #8)
Dvojne palice: do Ø20 mm (#6)
• Detektor prisotnosti palice
• Večnamenski podajalni sistem: čeljust in podajalni valji
• Dvojne škarje
• Upogibni zatiči v skladu z mednarodnimi standardi
Opomba: Ta video je promocijska predstavitev proizvajalca za model SYNTAX 28. Ne prikazuje specifične linije, ki je trenutno naprodaj.
Enojna palica: ∅10 - ∅28 mm (#3 - #8)
Dvojne palice: do ∅20 mm (#6)
mali oglas
Windsor Hill, Co. Cork, Ireland
1.808 km
Krožna žaga za lahke kovine in aluminij
MEPCOBRA 350AX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11900715/C, premer žaginega lista: 350 mm, dolžina podajanja os X: 180 mm, dolžina podajanja os Z: 170 mm, skupna dolžina: 2.210 mm, skupna širina: 1.100 mm, skupna višina: 1.550 mm, Obseg rezanja okroglega jekla pri 90°: 120 mm, Razpon rezanja okroglega jekla pri 45°: 120 mm, vrsta vhodnega toka: trifazni, vrtljajska hitrost (min.): 15 obr/min, največja hitrost vrtenja: 90 obr/min, največja višina reza: 170 mm, skupna masa: 530 kg, hitrost žaginega lista: 90 obr/min, vhodna napetost: 400 V, Obseg rezanja kvadratnega jekla pri 45°: 100 mm, Območje rezanja kvadratnega jekla pri 90°: 105 mm, pogonska enota žage: 2.200 W, premer rezanja: 120 mm, izvrtina žagine plošče: 32 mm, 2000 MEP Cobra 350AX Avtomatska Krožna Žaga za Hladno Rezanje – Učinkovito Rezanje Kovin za Industrijsko Proizvodnjo
Na voljo zdaj: MEP Cobra 350AX, zmogljiva avtomatska krožna odrezovalna žaga, popolna za industrijsko rezanje kovin. Izdelana leta 2000 in v dobrem delujočem stanju, ta stroj združuje ročni in avtomatski način dela, nastavljive rezalne nastavitve ter 350 mm rezilo za dosledno in kakovostno rezanje.
🔧 Ključne značilnosti:
Velikost rezila: 350 × 32 × 2,5 mm
Moč motorja vretena: 2,2 kW
Hitrosti rezila: 15 / 30 / 45 / 90 vrt/min
Odpiranje primeža: 160 mm
Način vpenjanja: pnevmatski
Napajanje: 400 V / 3 faze / 50 Hz
Ročni & avtomatski način: Da
Globina reza & višina prislona: popolnoma nastavljiva
Teža stroja: 530 kg
Dimenzije (D׊×V): 2210 × 1100 × 1550 mm
📏 Kapacitete rezanja:
Pri 0°:
Okrogla: 120 mm
Pravokotna: 180 × 170 mm
Kvadratna: 105 × 105 mm
Pri 45° levo:
Okrogla: 120 mm
Pravokotna: 135 × 60 mm
Kvadratna: 100 × 100 mm
Pri 45° desno:
Okrogla: 110 mm
Pravokotna: 135 × 60 mm
Kvadratna: 95 × 95 mm
⚙️ Idealna uporaba:
Rezanje jeklenih profilov, cevi, palic
Primerna za lahka in srednje zahtevna industrijska dela
Odličen stroj za izdelovalnice kovinskih konstrukcij, skladiščnike ter proizvodna podjetja
✅ Zakaj izbrati MEP Cobra 350AX?
Vsestansko rezanje pod različnimi koti in profilov
Ledowtr Iyopfx Ah Dehn
Dvojni način dela (avtomatski/ročni)
Kompakten, učinkovit in preprosto vključen v vaše delovne tokove
Pnevmatsko vpenjanje zagotavlja varnost in ponovljivost
Nizka začetna investicija za visoko vrednost stroja
MEP Cobra 350AX naprodaj
Rabljena avtomatska krožna žaga
Hladna žaga za rezanje kovin
Krožna pnevmatska žaga
Stroj za rezanje s 350 mm rezilom
Industrijska krožna žaga za kovine
MEP žaga, letnik 2000
Avtomatska žaga za kovine Slovenija
Krožna žaga za jeklene profile
400 V industrijska hladna žaga
mali oglas
Italija
292 km
Tračna žaga
MEP
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 2.950 mm, skupna višina: 27 mm, hitrost rezanja: 72 mm/min, Razpon rezanja okroglega jekla pri 45°: 230 mm, največja višina reza: 250 mm, Polavtomatska tračna žaga MEP SHARK 282 SXI Evo
Moč motorja: 1,5/1,8 kW
Dimenzije traku: 2950x27x0,9 mm
Lhodpjw Tau Hofx Ah Dsn
Hitrost: 36/72 m/min
Rezna površina 0°: 250 / 220x220 / 280x220 mm
Rezna površina 45° desno: 230 / 200x200 / 220x200 mm
Rezna površina 45° levo: 200 / 170x170 / 200x140 mm
Rezna površina 60° desno: 120 / 80x80 / 140x80 mm
Stroj je opremljen z valjčnimi stezami:
Vhodna stran: 1,5 m
Izhodna stran: 3 m z elektronskim prislonom PS3000
mali oglas
Concordia Sagittaria
174 km
MEP polavtomatska rezalna žaga
MEPTIGER 352 SX EVO
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO
- Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min)
- Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju
Ljdpfxexdr Rtj Ah Dshn
- Pomik rezalne glave po dvojnih linearnih vodilih
- Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih
- Uporabniški vmesnik z zaslonom
mali oglas
Friesenheim
593 km
Popolnoma avtomatska kovinska krožna žaga
MEPTIGER 372 CNC LR 4.0 + CB 4001 Magazin
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.150 h, Funkcionalnost: popolnoma funkcionalen, MEP TIGER 372 CNC LR 4.0 Metal Circular Saw + CB4001 Magazine
High-performance CNC automatic metal circular saw with microprocessor control for cutting from 45° right to 60° left.
Manufacturer: MEP
Model: TIGER 372 CNC LR 4.0
Year of manufacture: 2018
Condition: very good, lightly used
Operating hours: 2128 h
Cutting time: 1738 h
Machine with microprocessor control and two CNC-controlled axes, allowing up to 300 cutting programs on the same material or material in the CB4001 loading magazine, each with its own quantity and length.
Cutting capacity ROUND 0°: 120 mm
Cutting capacity ROUND 45° left: 115 mm
Cutting capacity ROUND 60° left: 115 mm
Cutting capacity ROUND 45° right: 115 mm
Cutting capacity SQUARE 0°: 110 mm
Cutting capacity SQUARE 45° left: 100 mm
Cutting capacity SQUARE 60° left: 90 mm
Cutting capacity SQUARE 45° right: 100 mm
Cutting capacity FLAT 0°: 180 x 100 mm
Cutting capacity FLAT 45° left: 120 x 100 mm
Cutting capacity FLAT 60° left: 90 x 90 mm
Cutting capacity FLAT 45° right: 120 x 100 mm
Variable speed: 15 to 150 rpm
Lsdpfxsxnpggs Ah Dshn
Motor: 5.5 kW
Saw blade: 370 x 32 mm
Coolant system
Length: 2500 mm
Width: 1840 mm
Height: 1890 mm
Weight: 1060 kg
Scope of delivery:
– Original documentation
– 4 x saw blades
mali oglas
Weil der Stadt
544 km
Krožna žaga za lahke kovine / aluminij
MEPCOBRA 352 NC 5.0
Klic
Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 571217, premer žaginega lista: 350 mm, skupna dolžina: 2.360 mm, skupna širina: 1.700 mm, skupna višina: 1.750 mm, Obseg rezanja okroglega jekla pri 90°: 120 mm, Razpon rezanja okroglega jekla pri 45°: 110 mm, vrtljajska hitrost (min.): 1.700 obr/min, največja hitrost vrtenja: 3.400 obr/min, največja višina reza: 120 mm, dolžina rezanja (maks.): 180 mm, skupna masa: 600 kg, delovna višina: 950 mm, hitrost žaginega lista: 3.400 obr/min, vhodna napetost: 400 V, Obseg rezanja kvadratnega jekla pri 45°: 105 mm, Območje rezanja kvadratnega jekla pri 90°: 105 mm, vrtilni razpon: 45 °, priključek za stisnjen zrak: 6 letvica, Oprema: dokumentacija / priročnik, Saw blade diameter: 350 mm
Cutting capacity at 90°: round 120 mm
Cutting capacity at 90°: square 105 mm
Ledpfxowl Hufj Ah Dehn
Cutting capacity at 90°: flat 180x70 mm
Cutting capacity at 45°: round 120/110 mm
Cutting capacity at 45°: square 10/95 mm
Cutting capacity at 45°: flat 135x60 mm
Speed: 1700 / 3400 rpm
Incl. roller conveyor
For sale is a used fully automatic circular saw COBRA 352 NC 5.0, with semi-automatic function, designed for cutting aluminium and light metal alloys. The machine is configured for the use of carbide-tipped circular saw blades (HM).
This machine enables mitre cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis along the cutting line, it is also possible to perform sawing operations with the saw head tilted between 0° and 45° to the left.
mali oglas
Ahaus
878 km
Hladna krožna žaga
MEPFALCON 352
Klic
Stanje: dober (rabljeno), Leto izdelave: 2018, Sägeblattdurchmesser 350 x 32 mm
Lhjdpfx Ahjxn Anwe Dsn
Schnittbereich bei 90 Grad: rund 115 mm
Schnittbereich bei 90 Grad: vierkant 100 mm
Schnittbereich bei 90 Grad: flach 130 x 80 mm
Schnittbereich bei 45 Grad: rund 100 mm links
Schnittbereich bei 45 Grad: rund 75.0 mm rechts
Geschwindigkeit 30 + 60 U/min.
Sägeblattabmessungen 350 x 32 mm
Maschinengewicht ca. 220 kg
laut Vor-Abgeber selten im Einsatz gewesen
Neupreis ca. 5.000 Euro
Sonderpreis auf Anfrage
Ausstattung:
- elektro-motorische Kaltkreissäge
- robuste Gusseisen-Struktur
- Getriebe mit Bronzerad und geschliffener/gehärteter
- Stahlschnecke in Spezialölbad
- manuelle Materialklemmung
- Gehrungsverstellung (links + rechts)
- elektrische Kühlmittelpumpe zur Kühlung
. und Schmierung des Sägeblattes
- 1x Sägeblatt
Sonderzubehör inklusive :
- Unterschrank mit Tür ( Stahluntergestell )
mali oglas
Wiefelstede
932 km
Hladna krožna žaga z nagibanjem na obe strani
MEPTRL 300
Klic
Stanje: dober (rabljeno), Hladna krožna žaga, krožna žaga za kov, kotna žaga, krožna žaga, žagalna naprava, kovinska žaga
-Proizvajalec: MEP, hladna krožna žaga za kov tip TRL 300, nagibna na obe strani
-Motor: tip C 112 M
-Moč: 2,2 / 3,0 kW
-Hitrost: 720 / 1450 obr/min
-Krožna žaga: Ø 315 mm
-Območje reza pri 90 stopinjah plosko: 110 x 70 mm
-Območje reza pri 45 stopinjah: 100 mm
-Dodatki: vklj. 2 krožna rezila, glejte slike
-Mere: 1230/630/V1800 mm
-Teža: 273 kg
Lhedsxlzytspfx Ah Don
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Remseck am Neckar
527 km
Hladno Krožna žaga
MEPTIGER 352 SX EVO
Klic
Stanje: novo, Saw blade diameter: 350 mm
Cutting capacity at 90 degrees (round): 115 mm
Cutting capacity at 90 degrees (square): 95 mm
Cutting capacity at 90 degrees (rectangular): 180 x 95 mm
Working height: 925 mm
Saw blade speeds: 15 / 30 / 45 / 90 rpm
Total power requirement: 1.8 / 2.5 kW
Machine weight approx. 0.41 t
Space requirement approx. 0.8 x 1.0 x 1.85 m
Ljdpsfg Rlbefx Ah Djhn
Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head.
- New system with vertically guided head sliding on linear guides with ball recirculating rails in the front.
- Double gearbox for high transmission power
- 4 speeds: 15 / 30 / 45 / 90 rpm
- Vice opening: 190 mm
- Stroke movement of the saw head programmable directly from the control panel to adjust for cutting material
- Pneumatic vertical vice
- HSS DMO 5 saw blade Ø 350x32x2.5 for solid and profile material
- Vice with counterhold device for double workpiece clamping
- Base frame with removable coolant tray
- Chip removal brush
- Length stop for identical cuts
- Material support arm, also suitable for connection to roller conveyor / loading side
- Turntable with additional central axis
mali oglas
Friesenheim
593 km
Popolnoma avtomatska kovinska krožna žaga
MEPTIGER 372 CNC LR 4.0
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.750 h, Funkcionalnost: popolnoma funkcionalen, MEP Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw (2019)
Manufacturer: Mep
Model: Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw
Year of manufacture: 2019
Condition: used, very good, tested and cleaned
Operating hours: 1750h
Cutting capacity ROUND 0°: 120 mm
Cutting capacity ROUND 45° left: 115 mm
Cutting capacity ROUND 60° left: 115 mm
Cutting capacity ROUND 45° right: 115 mm
Cutting capacity SQUARE 0°: 110 mm
Cutting capacity SQUARE 45° left: 100 mm
Cutting capacity SQUARE 60° left: 90 mm
Cutting capacity SQUARE 45° right: 100 mm
Cutting capacity FLAT 0°: 180 x 100 mm
Cutting capacity FLAT 45° left: 120 x 100 mm
Cutting capacity FLAT 60° left: 90 x 90 mm
Cutting capacity FLAT 45° right: 120 x 100 mm
Infinitely variable cutting speed: 15 to 150 rpm
Motor: 5.5 kW
Saw blade: 370 x 32 mm
Coolant system
Length: 2500 mm
Width: 1840 mm
Height: 1890 mm
Weight: 1060 kg
Scope of delivery:
Lodjxnpf Aepfx Ah Dehn
– Documentation
– 2 m infeed roller conveyor
– Machine lamp
– Chip conveyor
– Coolant system
mali oglas
Weil der Stadt
544 km
Krožna žaga za lahke kovine / aluminij
MEPCOBRA 352 NC 5.0
Klic
Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 563769, premer žaginega lista: 350 mm, skupna dolžina: 2.360 mm, skupna širina: 1.700 mm, skupna višina: 1.750 mm, Obseg rezanja okroglega jekla pri 90°: 120 mm, Razpon rezanja okroglega jekla pri 45°: 110 mm, vrtljajska hitrost (min.): 1.700 obr/min, največja hitrost vrtenja: 3.400 obr/min, največja višina reza: 120 mm, dolžina rezanja (maks.): 180 mm, skupna masa: 600 kg, delovna višina: 950 mm, hitrost žaginega lista: 3.400 obr/min, vhodna napetost: 400 V, Obseg rezanja kvadratnega jekla pri 45°: 105 mm, Območje rezanja kvadratnega jekla pri 90°: 105 mm, vrtilni razpon: 45 °, priključek za stisnjen zrak: 6 letvica, Oprema: dokumentacija / priročnik, Saw blade diameter: 350 mm
Cutting range at 90 degrees: round 120 mm
Cutting range at 90 degrees: square 105 mm
Cutting range at 90 degrees: flat 180x70 mm
Cutting range at 45 degrees: round 120/110 mm
Cutting range at 45 degrees: square 10/95 mm
Cutting range at 45 degrees: flat 135x60 mm
Speed: 1700 / 3400 rpm
Including roller conveyor
Lhodpfxswl Hr Rs Ah Don
For sale is a used COBRA 352 NC 5.0 fully automatic circular saw with semi-automatic function, designed for cutting aluminum and light metal alloys. The machine is suitable for use with carbide-tipped circular saw blades (HM).
This machine allows for miter cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis along the cutting axis, it is also possible to perform sawing operations with the saw head tilted between 0° and 45° to the left.
mali oglas
Remseck am Neckar
527 km
Hladna krožna žaga
MEPTIGER 352
Klic
Stanje: novo, Saw blade diameter 350 mm
Cutting range at 90 degrees: round 115 mm
Cutting range at 90 degrees: square 95 mm
Cutting range at 90 degrees: rectangular 180 x 95 mm
Working height 925 mm
Saw blade speeds 15+30+45+90 rpm
Total power requirement 1.8/2.5 kW
Ledpfx Ajfgpdloh Djhn
Machine weight approx. 0.38 t
Space requirement approx. 0.8 x 1.0 x 1.85 m
Manual vertical circular saw for mitre cuts from 60° left to 45° right.
Olajšamo vam iskanje: "mep shark 320 ax"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Mep Shark 320 Ax (120)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec















































































































































