Tračna žaga

MEP - Vollautomat SHARK 332-1 NC 5.0 MDE

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Iedpsulnb Defx Agpea Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Iedpjchhfujfx Agpsa Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, CNC krmilnik: HEIDENHAIN TNC 640 Osi Pomik osi X mm: 2.200 Pomik osi Y mm: 2.200 Pomik osi Z mm: 1.610 Osa A stopinj: +185° Delovna miza Število palet: 4 Iodpew Rmplofx Agpja Dimenzije mize mm: ø1.800x1.400 Maksimalna dimenzija obdelovanca (D x V) mm: ø2.850x2000 Maks. teža obdelovanca kg: 4.000 Vreteno Hitrost vretena rpm: 15.000 Moč vretena kW: 63/73 (100/40%ED) Vrtljivi moment vretena Nm: 300/348 (100/40%ED) Hlajenje Hlajenje skozi sredino vretena bar: 80 (Form A) Kapaciteta rezervoarja: 2.500 Orodni sistem Držalo za orodje: HSK-100A Število mest v orodnem magazinu: 304

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 11.832 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 700 mm, pomik po osi Z: 500 mm, največja hitrost vrtenja: 15.000 obr/min, število mest v zalogovniku orodij: 38, Kot zasuka osi A (min.): −139 °, zasukni kot osi A (maks.): 91 °, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS Travel distances X-axis: 850 mm Travel distances Y-axis: 700 mm Travel distances Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverse X-Y-Z (linear): 35 - 35 - 35 m/min Acceleration X-Y-Z (linear): 6 m/s² Feed force X-Y-Z (linear): 7,000 N Max. throat gap: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/Torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine positions: 38 Chip-to-chip time: approx. 6 s Max. tool length: 300 mm Tool diameter with adjacent slots filled: Ø 80 mm Tool diameter without adjacent slots: Ø 125 mm Max. tool weight: 8 kg Max. magazine load: 152 kg Swivel rotary table Clamping area: Ø 650 x 540 mm Swivel range: +91° / -139° Drive type C-axis: Worm drive Swivel axis A speed: 25 rpm Rotary axis C speed: 30 rpm Table load (one-sided drive): 600 kg Accuracy per ISO 230-2 Deviation (A in X-Y-Z axes): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Power supply (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filters: Pre-filter, paper band filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: Minimum quantity grease lubrication MACHINE DETAILS Control on-time: 20,178 h Machine on-time: 19,094 h Spindle run time: 11,832 h Weight: approx. 9.5 t Power supply Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM touch probe Isdpfovw Sdqox Agpoa - BLUM laser tool measurement - Extendable chip drawer - Swivel rotary table - Coolant spray gun - Emulsion mist extraction - Scraper belt conveyor - Air blast device - Air blow through the spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical thermal compensation (Heidenhain) - Electrical manual control module (Heidenhain)

Leto izdelave: 1989, Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.6 kW Machine weight: approx. 0.41 t Space requirement: approx. 0.8 x 1.0 x 1.85 m Iedpei Df D Ajfx Agpsa Semi-automatic cold circular saw

Stanje: novo, Model KKS 350 T podjetja KNUTH je zmogljiva in natančna hladna krožna žaga iz kategorije krožnih žag za kovino. Ta ročna hladna žaga je idealna za obdelavo manjših cevi in profilov ter omogoča natančno poševno rezanje. Opremljena s samocentričnim dvojnim primežem, ki pritrjuje obdelovanec na obeh straneh rezila, zagotavlja optimalne rezultate rezanja. Natančni rezi in robustna konstrukcija naredijo KKS 350 T nepogrešljivo orodje v vsaki delavnici. Z integriranim sistemom za dovajanje hladilnega sredstva in zmogljivimi motorji ta kovinska krožna žaga ponuja ne le stabilnost, temveč tudi delovanje z nizkimi zahtevami za vzdrževanje. Za optimalne rezultate lahko nastavite kot reza do +/- 45°. Prepričajte se sami o kakovosti in zmogljivosti hladnih krožnih žag. Naročite še danes! Ijdsuyifbspfx Agpea

Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: 2015-04-070408, Ponudba 25155 Tehnični podatki: - Dimenzija brusnega traku: 2000 x 150 mm - Odprtina za površinsko brušenje: 430 x 150 mm - Hitrost brusnega traku: 36 m/min - Kontaktni kolut: B 150 / D 200 - Pogonski kolut: B 150 / D 200 - Pogon: 400 V / 3450 vrt/min / 4 kW - Nastavljiva delovna višina: 475 - 1240 mm - Motorni odsesovalnik prahu tip GIBE Iedpjw Ugvtjfx Agpja - Potreben prostor pribl.: Š 580 x V 1250 x G 1000 mm - Teža pribl.: 110 kg

Stanje: rabljeno, Leto izdelave: 1990, Saw blade diameter: 350 mm Saw blade dimensions: 350 x 32 x 2.5 mm Iodjwvl E Repfx Agpja Cutting diameter: 115 mm Cutting range at 90°: square 95 mm Cutting range at 90°: flat 180 x 95 mm Cutting range at 45°: round right & left 110 mm Cutting range at 45°: square right & left 95 mm Cutting range at 45°: flat right & left 125 x 95 mm Cutting range at 60°: round 90 mm Cutting range at 60°: square 80 mm Cutting range at 60°: flat 90 x 95 mm Cutting speed: 15 - 90 m/min Total power requirement: 2.5 kW Machine weight: approx. 400 kg Space requirement: approx. 1000 x 950 x 1800 mm Features: - with mitre adjustment 60° left / 45° right - machine base frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) Iodpfexdr Rtox Agpja - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Stanje: novo, Cutting diameter: 350 mm Saw blade length: 4640 x 34 x 1.1 mm Cutting width: 350 mm Control: NC 5.0 Band speed: 15 - 100 m/min Cutting range at 0 degrees, round: 350 mm Cutting range at 0 degrees, square: 350 x 350 mm Table height: 860 mm Total power requirement: 4 kW Machine weight approx. 2.8 t Shark 350 NC 5.0, automatic hydraulic band saw in double-column design for 0° cuts up to maximum 350x350 mm. Iedpfxswu Hhds Agpja Standard equipment includes: - Driven chip conveyor, can be installed on either side of the machine - Clamping pressure regulation for the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw, can also be operated semi-automatically, featuring the new MEP 50 control system, developed by MEP specifically for automatic machines, Windows "CE" based - "Clean Cut" cycle: the feeder pushes the workpiece back to avoid scoring at the cut surface when the blade rises again at the end of the cut - Fieldbus communication system with dual microprocessor and serial connection - User interface with 7” touchscreen and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters Scope of supply: - Shark 350 NC/CNC HS comes as standard with swarf conveyor - Bi-metal saw band, tool kit - Mounting adapter for infeed roller conveyor - Material chute for removal of short offcuts - Forklift/pallet truck access Machine available from stock, subject to prior sale