Mep Shark 270 nakup rabljenega (107)

Stanje: novo, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Total power requirement: 4.0 kW Machine weight approx. 2,800 kg Space requirement approx. 2200 x 3200 x 2200 mm Fully automatic band saw with dual-column guide for series cuts, especially in difficult-to-machine materials and solid stock. With this machine, MEP offers you a technologically state-of-the-art solution that, thanks to the use of premium materials, features an exceptionally robust and torsion-resistant structure. An extremely sturdy saw frame made of cast iron ensures the necessary stability for outstanding cutting results, and the heavy-duty cast iron columns—over which the saw frame glides on preloaded linear guides—ensure maximum cutting precision even under peak loads. The advanced machine control (MEP NC 5.0) offers the operator maximum ease of use and ensures trouble-free operations (real-time monitoring/evaluation/correction). MAXIMUM PERFORMANCE > Two operating modes (semi-automatic and automatic) allow for efficient cutting under all conditions. > The control allows you to store up to 100 cutting programs with different quantities and lengths, minimizing programming time for recurring jobs. > Automatic detection of the saw head start position reduces setup times. > The saw head feed via linear guides driven by hydraulic cylinders with preloaded recirculating ball bearings reduces mechanical vibration during cutting and increases stability. > The automatic alignment of the front saw blade guide head according to the dimensions of the stock to be cut reduces processing time. > Saw blade tensioning is controlled by a brushless motor and is continuously monitored and automatically adjusted to the preset minimum value. EXTREMELY FLEXIBLE > The feed system with a 600 mm stroke is repeatable and able to cut all lengths. > The vertical roller pair allows any type of bar or bundle being fed to be held and aligned. Cpsdolf Tu Uepfx Afnew > The vector inverter for infinitely variable adjustment of the blade speed from 15 to 100 m/min enables cutting of all materials. > The motorized chip conveyor can be mounted either to the right or left of the cutting area. FEATURES: Fully automatic control – NC 5.0 - Innovative (Windows CE-based) touch screen control with additional soft-touch buttons for frequent operations - USB port - Joystick for manual axis control (X-Y) - Controlled saw head descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of the preset torque, and precise feed rate adjustment in mm/min - Adjustable/infinite preselection of band speed in m/min - Saw band tensioning with tension monitoring and display via an electronic transducer - Automatic detection of cut start - Large 7" color touch screen for display and selection of all machine functions and parameters, with rapid programming. Displays detailed alarm and error messages - Numerous...

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting area at 90 degrees - flat: 280 x 200 mm Cutting area at 90 degrees - square: 230 mm Cutting area at 45 degrees - round: 190 mm Cutting area at 45 degrees - flat: 180 x 180 mm Cutting area at 45 degrees - square: 180 mm Cutting area at 60 degrees - round: 120 mm Cutting area at 60 degrees - flat: 110 x 110 mm Cutting area at 60 degrees - square: 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t Powerful mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic operation. (Infinitely variable feed rate adjustment and automatic shut-off at end of cut) Description: -Manual cutting cycle Cjdpexz Hhzefx Afnopw -AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via counterbalance spring -Sturdy, torsion-resistant, and low-vibration saw frame made from cast steel -Quick-release vice -Carbide blade guides for maximum cutting precision -Large, adjustable cast steel band wheels -Hydraulic unit for saw band tensioning and monitoring with manometer display (band tension = 900 kg) -Clearly arranged control panel with all operating elements -Electric coolant pump for cooling and lubricating the saw blade -Chip removal brush for cleaning the saw blade

Stanje: novo, Model designation: Shark 282 CCS Cpodpfx Afegvkbconjw

Stanje: novo, Model designation: Shark 281 SXI evo Cjdpfx Aegvkglsfnspw

Stanje: novo, Model designation Shark 281 CCS Cjdpfogvkchox Afnopw

Stanje: novo, Model designation SHARK 331-1 NC 5.0 SPIDER Cpedpfx Afjl Sva Ienow

Stanje: novo, Model designation Cpsdpfx Ajgvkafsfnsw Shark 332-1 SXI evo

Stanje: novo, Model designation Codjgvquwjpfx Afnopw Shark 332-1 CCS

Stanje: novo, Model designation: Shark 282 SXI evo Codpfx Afogvkctjnepw

Stanje: rabljeno, Leto izdelave: 2015, Premer reza 225 mm Dolžina tračnega lista 2450 mm Cpjdox Hp Dxjpfx Afnow Širina reza 240 mm Dimenzije tračnega lista 2450 x 27 x 0,9 mm Območje reza pri 90 stopinjah: ploščato 240 x 160 mm Območje reza pri 90 stopinjah: kvadratno 200 mm Območje reza pri 45 stopinjah: okroglo 160 mm Območje reza pri 45 stopinjah: ploščato 155 x 115 mm Območje reza pri 45 stopinjah: kvadratno 140 mm Območje reza pri 60 stopinjah: okroglo 90 mm Območje reza pri 60 stopinjah: ploščato 90 x 90 mm Območje reza pri 60 stopinjah: kvadratno 90 mm Teža stroja cca 240 kg Oprema: - Ročni tračni žagalni stroj - Enostransko poševno rezanje - Samodejno spuščanje žagalnega loka - Rezi od 0° do 60° levo - Naprava za hlajenje

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, vrsta vhodnega toka: Enosmerni tok, največja višina reza: 285 mm, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Output: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material Cjdsxyywmopfx Afnepw - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: novo, Length: 1500 mm 6 steel tube rollers, width: 185 mm Diameter: 20 mm Continuously adjustable height: 650 – 1030 mm Required space: 1500 x 250 x 650/1030 mm Cpsdpsfxu Tkofx Afnsw

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 108401 23-D, Ponudba 25318 Tehnični podatki: - Ročni tračni žagalni stroj - Dimenzija žaginega traku: 2375 x 20 x 0,9 mm - 2 hitrosti rezanja: N 33 / 66 o/min Cjdpfx Afjxta N Aonjpw - Največja vpenjalna zmogljivost: 205 mm - Nastavljiv kot rezanja levo + desno: 30° - Rezni razpon: - 90° okroglo: 160 mm - 90° kvadratno: 160 mm - 90° ploščato: 200 x 100 mm - 45° levo + desno okroglo: 140 mm - 45° ploščato: 140 x 60 mm - Pogon: 400 V / 1,5 / 1,8 kW - Opremljenost s hladilnim sredstvom - Odvodni valjčni transporter z omejevalom: 3000 mm - Dovodni valjčni transporter: 1500 mm - Teža: pribl. 350 kg - Potrebni prostor: pribl. Š 1100 x V 1700 x G 1550 mm

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cpjdpfx Asfg E H Eofnjw Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: novo, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. Cpjdpfx Asfg E Hyefnew - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.

Stanje: novo, Cutting diameter: 280 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control: NC Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Attention: Special offer price! Codpfx Asfg E H Dsfnepw • Hydraulic fully automatic bandsaw • Mitre cuts up to 60° to the left possible • Saw blade length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touch screen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required footprint: 3.4 m² • Installation dimensions: 1900 mm wide x 1800 mm deep

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Precision degree markings on the cast iron frame Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Cpedpfxefg E H Ie Afnow Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering instructions in user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Codjfm T Hbspfx Afnepw Price on request.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Cedpfefg E Hzsx Afnopw Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Leto izdelave: 2003, stanje: rabljeno, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Codora Rrlspfx Afnspw Cutting capacity – Rectangle: 330 x 260 mm Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Codjfg E Iajpfx Afnepw Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported. Cpedpfx Afsfg E Ibjnjw

Stanje: novo, Cutting diameter: 250 mm Cedsfg E H Rspfx Afnepw Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Key Features: Cpsdpfxefg E H Uj Afnew - New centralized control console on an articulated arm. - Low voltage control panel: - Polyester membrane keyboard with thermoformed raised buttons and operating control signal. - Display showing: * Diagnostics (messages in user language) * Alarms (description of alarm reasons) * Status of inputs and outputs * Cut counter * Time elapsed per completed cut * Saw blade motor current * Saw blade tension * Saw blade speed * Numerical display of head position - Manual 24V cycle selector switch IP55. - Complete program of all special cutting cycles. - Identification of additional special cutting cycles for specific applications. - New generation, highly efficient hydraulic control unit with low energy consumption. - Rotary table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual band speed (40/80 m/min.) with control - Prepared for installation of electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to adapt to the workpiece material. - Clamping device can be shifted left/right, with quick-release vice. - Manual blade tension control with screen display via electronic converter. - Machine base designed to fully collect coolant, even during maximum angle cuts. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced with a chip conveyor – see optional accessories) integrated in the base. - Preparation for the installation of minimal blade lubrication set (optional, in addition to the standard emulsion oil lubrication system). - Integrated chip removal brush. - Machine designed for pallet truck transport. - Adjustable length stop for repeat cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the relevant user language.

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions. Cpedsfg E H Topfx Afnow