Mep Scorpio 300 nakup rabljenega (117)

Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: • New centralized control console on an articulated arm for easy operation from any working position. • Low-voltage operating panel: – Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal. – Display for: * Diagnostics (user language messages) * Alarms (alarm cause descriptions) * Input/output status * Cut count Iiedpfxjcgbq Ij Ah Aek * Time used for each cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position. • IP55 manual cycle lever (24 V). • Complete range of special cutting cycles. • Capability for defining further special cycles for specific applications. • New-generation, highly efficient, low-energy hydraulic control unit. • Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing. • Dual blade speed (36/72 m/min) with control. • Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min. • Bow stroke programmable directly from control panel to adapt to the material. • Clamping device laterally adjustable left and right, with quick-release vice. • Manual blade tension control with electronic converter and on-screen display. • Base frame with pull-out coolant tray. • Electric coolant pump for blade cooling and lubrication. • Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil. • Chip removal brush. • Machine suitable for pallet truck transportation. • Length stop for repetitive cuts. • Material support arm with roller, suitable for mounting loading table. • Bimetallic bandsaw blade for solid and profile materials. • Tools and user manual included in user’s language. For further technical data, please refer to the attached PDF document.

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vise opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Ijdpfx Ahjxab S Es Aeik Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1,105 kg Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally equipped with: * semi-automatic * semi-automatic dynamic * manual operation modes Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS CNC control unit * User interface with 7” touchscreen display * Mechanical keys for machine operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivel arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycles selectable * For non-programmed cutting operations - Safety enclosure for operator protection - Infinitely variable cutting speed adjustment from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on counter-rotating ball bearings * Single stroke 600 mm, repeatable for any required length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display indicator * Electronic converter - Automatic monitoring of cutting force * Servo valve mounted directly on the cylinder - Coolant tray integrated into machine base - Chip removal brush - Bimetal saw blade for solid and profile materials - Tool kit and operating manual with spare parts list * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, MEP SHARK 281 CCS Metal Bandsaw with Semi-Automatic Descent. Item Number: SH281CCS Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 375 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Iisdpscgbp Iofx Ah Aek Cutting Capacity 60° left - Description: - Saw bow, vise unit, and base made from robust cast iron - Precision angle indicator integrated into the cast iron frame - Electrical system (with fully identifiable wiring and low-voltage system 24 V) - IP 55 selector handle for manual operation (where applicable) - Rotating chip brush for the saw blade - Quick-closing device with vise for rapid approach - Precise stops with settings for mitre cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts list in the user’s language - SHARK 281 available with manual feed; SHARK 281 CCS with manual operation and automatic cutting via gravity feed - CCS (Cut Control System) functions: (A) Switch for manual and automatic cut, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for halting the blade – also available as an option for existing machines - Quick-set vise - Hydraulic converter for blade tension display - Electric coolant pump for band lubrication and cooling, with accessible coolant tray above the base frame - MA versions with pneumatic vise: opening and closing via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item Number SH281SXI Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 435 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description Semi-automatic function: The vise closes and the motor starts, the saw head descends to perform the cut, then the motor stops, the head raises, and the vise opens automatically. Key Features: - New, centralized control panel mounted on an articulating arm - Latest generation hydraulic control unit, highly efficient with low energy consumption - Base frame with removable coolant tank The machine complies fully with all CE regulations! Please refer to the attached PDF document for further technical specifications.

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Iijdpoxabwhsfx Ah Ask Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vise 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Features: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display * Easy and fast setting of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 piece counting and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, displayed in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cut start - Large, adjustable cast steel band wheels - Saw blade tension with blade tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-acting vise * With interchangeable clamping and stop jaws - Large, side-sliding chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant spray gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with a residual current circuit breaker (RCD), ensure this is all-current sensitive and rated not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 - 100 m/min, steplessly adjustable Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: — Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: — Description Fully automatic hydraulic bandsaw Mitre cuts up to 60° to the left possible Saw blade length: 3650x27x0.9 mm Single stroke: 600 mm (programmable up to 10m) Simple touchscreen operation Saw arm made from spheroidal graphite iron – robust and stable Space requirement: 3.4 m² Footprint: 1900 mm wide x 1800 mm deep Isdpfx Ahechhdio Asik For further technical data, please refer to the attached PDF document.

Stanje: rabljeno, Leto izdelave: 2004, Cutting diameter: 120 mm Saw blade diameter: 370 mm Vice width: 190 mm Cutting capacity at 90 degrees, flat: 180 x 95 mm Cutting capacity at 45 degrees, round: 110 mm Cutting capacity at 45 degrees, flat: 125 x 95 mm Cutting capacity at 60 degrees, round: 90.0 mm Cutting capacity at 60 degrees, flat: 90 x 95 mm Saw blade dimensions: 370 x 32 x 2.5 mm Cutting speed: 15 - 150 m/min Motor power: 3.0 kW Weight: 640 kg Dimensions (L x W x H): 900 x 1500 x 1910 mm Original price approx. €16,000 Iisdpfx Ahoxabrxs Aek - Machine in checked/inspected condition - machine video available - ?v=gxj5GWtTcDE Equipment: - Semi-automatic vertical metal circular saw - Mitre adjustment: 60° left / 45° right - Swiveling operator panel, front left - Saw head runs on linear double guideways - Pneumatic vice clamping - Stepless pneumatic saw blade feed - Infinitely variable saw blade speed adjustment - 2x spare saw blades - Machine base with coolant system - Operating manual

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Ijdpechhfusfx Ah Aeik Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: novo, Cutting diameter: 230 mm Cutting range at 90 degrees, flat: 230 x 230 mm Cutting range at 90 degrees, square: 230 x 230 mm Vice opening: 235 mm Cutting speed range: 15 - 100 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP CNC Total power requirement: 3.18 kW Machine weight: approx. 1,175 kg Space requirement: approx. 1980 x 1105 mm * Automatic double-column bandsaw with a footprint of only 2.5 square meters * * Maximum performance in the smallest space * Equipment: - Powerful CNC automatic bandsaw in double-column design * for 0° cuts - Windows CE-based touch screen control * Swiveling control panel, 5.0 - 180° * Up to 100 cutting programs with different quantities and lengths * Minimizes programming time for recurring jobs - 2 operating modes (semi-automatic and automatic) * Enables efficient cutting under all conditions - Saw head feed via hydraulic cylinders . Driven linear guides with preloaded ball bearings * Reduces mechanical vibrations during cutting Iodpjxabq Uofx Ah Aoik - Automatic alignment of the front saw blade guide head * Reduces processing time - Feed system with 600 mm stroke, repeatable, allows cutting of all lengths - Vertical roller pairs for any type of bar or bundle material - Infinitely variable blade speed from 15 to 100 m/min - Robust cast iron (G25) structure to compensate for vibrations - Safety enclosure complying with the latest safety regulations . according to Machinery Directive EN 13898/2007

Stanje: novo, MEP SHARK 350 NC HS 5.0 Fully Automatic Double-Column Metal Bandsaw Article number: MEP SHARK 350 NC HS 5.0 Motor power: 4.0 kW Table opening: 355 mm Blade dimensions: 4640 x 34 x 1.1 mm Weight: 2,800 kg Speed: 15 – 115 m/min, stepless Cutting capacity 0°: 350 / 350 x 350 mm Cutting capacity 45° right: Cutting capacity 45° left: Cutting capacity 60° right: Cutting capacity 60° left: Iijdpfsi Hmcdjx Ah Ajk Description: Automatic hydraulic bandsaw in double-column design for 0° cuts in solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Numerically controlled bandsaw, which can also be operated in semi-automatic mode, with the new MEP 50 CNC controller, specially developed by MEP for automatic machines, based on Windows-2 "CE" technology. Standard features include: - Powered swarf conveyor, installable on the right or left side of the machine - Vise clamping pressure regulation - Feeder with vertical rollers for lateral material support - Clamping pressure regulation - Storage for 100 programs - Machine available with 34 mm or 41 mm blade—no extra charge

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (industrial) - Large, bearing-mounted turntable Isdsxabpwjpfx Ah Aeik * For mitre cuts from 45° right to 60° left - Automatic saw bow descent * With stepless, adjustable feed * Limit switch at end of cut - Manual cutting operation selectable - Two blade speeds - Carbide blade guides - 1x saw blade - 1x mitre stop - Integrated chip brush - Control panel – front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Motor power: 1.1/2.2 kW Vice opening: 130 mm Blade dimensions: 350x32x2.5 Weight: 220 kg Speed: 30/60 rpm Cutting capacity at 0°: 115 / 100 / 130x80 mm Cutting capacity at 45° right: 100 / 85 / 90x80 mm Cutting capacity at 45° left: 75 / 75 / 90x65 mm Cutting capacity at 60° right: — Cutting capacity at 60° left: — Description Manual mitre chop saw for miter cuts from 45° right to 45° left, offering high cutting performance. Constructed from robust cast iron, practical and safe for every cut. FALCON 352 is available as a bench model or with a stand (optional accessory). The machine comes equipped with a two-speed three-phase motor. On request, a pneumatic vice is available (FALCON 352 MA, the vice automatically closes when lowering the head). This version is always supplied with a stand. Iisdpfjcgrkyex Ah Aek Standard equipment: - Externally adjustable clutch - Locking device with vice - Slideable on prismatic guide with adjustable rail - Fixed vice jaws with axial adjustment for clamping the workpiece directly at the cutting line - Adjustable chip removal bracket, fully manufactured from steel - 48 V electric coolant pump for blade cooling and lubrication - Double return spring for securing the loading platform - Machine can be hoisted - Worm shaft mounted on bearing pair - Saw blade spindle mounted on offset shaft - Two speeds: 30 and 60 rpm - Vice opening 130 mm - Machine is supplied without saw blade. Electrical equipment: - Electrical control panel - Labeled cable connections - Main safety switch prepared for padlock - Emergency stop device - Phase failure protection - Speed selector switch - Thermomagnetic protection - Undervoltage release - Motor with protection class IP 54 - Low voltage circuit 24 V - Electric coolant pump 48 V - Motor 1.1/2.2 kW – 400 Volt For further technical specifications, please refer to the attached PDF document.

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: flat 130 x 80 mm Cutting capacity at 45 degrees: round 100 mm (left) Cutting capacity at 45 degrees: round 75 mm (right) Speed: 30 / 60 rpm Iodjxabnmspfx Ah Aoik Saw blade dimensions: 350 x 32 mm Machine weight: approx. 220 kg Features: - Robust cast iron construction - Gearbox with bronze gear and ground/hardened steel worm, running in special oil bath - Vise with counter-tension device for double workpiece clamping - Electric coolant pump for blade cooling and lubrication Scope of delivery: - Adjustable length stop, 600 mm - Tool kit - Detailed operating instructions, maintenance manual - Circuit diagrams and exploded drawings - Crane lugs for transport * Machine is supplied without saw blade Special accessories included: - Base cabinet with door (steel stand)

Stanje: novo, MEP TIGER 372 CNC LR 4.0 Article Number: TI372CNCLR Motor Power: 4.0 kW Vise Opening: 190 mm Blade Dimensions: 370x32x3 Weight: 1,060 kg Speed: 15-150 rpm Cutting Capacity at 0°: 120 / 110 / 180x100 mm Cutting Capacity at 45° Right: 115 / 100 / 120x100 mm Cutting Capacity at 45° Left: Cutting Capacity at 60° Right: Cutting Capacity at 60° Left: Iodpfxjchkyro Ah Aoik Description: Electromechanical vertical circular saw with semi-automatic operation, designed for use with HSS saw blades to perform precision cuts from 45° right to 60° left. Equipped with multi-micro processors and two controlled axes, allowing programming of up to 80 different cutting programs with individual cut lengths and quantities at the same material thickness. Standard Equipment: - Saw head glides on ball bearing linear twin guides - Saw head feed via electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (1000 mm length) via ball screw and stepper motor with movable feeder vise - Vise opening 190 mm - Programmable stroke path of the saw head via control panel, to adapt to cutting material - Pneumatic vertical vise - HSS saw blade DMO 5 Ø 370x32x3 for solid and sectional material - Chip removal brush - Machine prepared for pallet truck transport, includes tools and operating manual Electrical Equipment: - Control panel - Programmable for 80 different cutting programs - Status indicator light - Main safety switch - Console for programming and operation, LCD display with autodiagnostics - LED function check at control panel - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - Switch handle, protection class IP 55 - 24V low-voltage system - Electric coolant unit for blade lubrication and cooling (option for micro-spray system) - Motor 4.0 kW - 400V MEP TIGER 372 CNC LR 4.0 RC with Automatic Mitre Article Number: TI372CNC LR 4.0 RC Motor Power: 4.0 kW Vise Opening: 190 mm Blade Dimensions: 370x32x3 Weight: 1,060 kg Speed: 15-150 rpm Cutting Capacity at 0°: 120 / 110 / 180x100 mm Cutting Capacity at 45° Right: 115 / 100 / 120x100 mm Cutting Capacity at 45° Left: Cutting Capacity at 60° Right: Cutting Capacity at 60° Left: Description: Automatic electromechanical vertical circular saw for use with HSS saw blades, designed to execute series cuts with automatic mitre adjustment between -45° and +45° on steel. In semi-automatic cycle, mitre cuts between -45° and +60° can be made. Equipped with multi-micro processors and two controlled axes, enabling programming of up to 80 different cutting programs with individual cut lengths and quantities at the same material thickness. Standard Equipment: - Saw head glides on ball bearing linear twin guides - Saw head feed via electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (1000 mm) via ball screw and stepper motor with movable feeder vise - Vise opening 190 mm - Programmable stroke path of the saw head via control panel, to adapt to cutting material - Pneumatic vertical vise - HSS saw blade DMO 5 Ø 370x32x3 for solid and sectional material - Chip removal brush Electrical Equipment: - Control panel - Programmable for 80 different cutting programs - Status indicator light - Main safety switch - Console for programming and operation, LCD display with autodiagnostics - LED function check at control panel - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage rele

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90°: round 115 mm Cutting capacity at 45°: round 110 mm Cutting capacity at 60°: round 90.0 mm Cutting capacity at 90°: square 95 x 95 mm Cutting capacity at 45°: square 95 x 95 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 90°: flat 180 x 95 mm Cutting capacity at 45°: flat 125 x 95 mm Cutting capacity at 60°: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Control system: MEP NC Total power requirement: 1.8 / 2.5 kW Weight: 410 kg Dimensions (L x W x H): 2050 x 1050 x 1120 mm Equipment / Description: Ijdexabd Ijpfx Ah Ajik - NC electro-pneumatic semi-automatic (INDUSTRIAL) * suitable for cuts from 45° right to 60° left - MEP NC control with soft-touch keyboard * backlit display - Saw head guided on preloaded linear guides on a robust cast steel column - Powerful 2-speed gearbox designed specifically for solid material cutting - Four blade rotation speeds available for optimal adaptation to the material - Large, ball-bearing rotary table with internal table clamping & precision stops at 0/45/60° for fast adjustment for miter cuts - Pneumatic vice equipped with bolted jaws, providing optimum workpiece clamping thanks to the ribbed surface - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Comprehensive operating instructions, maintenance manual - Wiring diagrams and exploded drawings - Lifting eyes for transport * Machine is supplied without saw blade

Stanje: novo, MEP TIGER 352 NC 5.0 [Fully Automatic] Article Number TI352NC Motor Power 3.0 kW Vise Opening 190 mm Blade Dimensions 350x32x2.5 mm Weight 680 kg Blade Speed 15 - 90 m/min Cutting Capacity 0° 115 / 95 / 180x95 mm Cutting Capacity 45° Right 110 / 95 / 125x95 mm Cutting Capacity 45° Left Cutting Capacity 60° Right Cutting Capacity 60° Left Iedechhhdspfx Ah Asik Description Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, enabling series cuts from 60° left to 45° right on steel. The machine also operates in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP control system, allowing up to 1,000 different cutting programs, each with individual cutting length and piece quantity for consistent material thickness. FEATURES: - New centralized control console on an articulated arm, so the operator can easily reach the emergency stop button from any working position. - NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial port. - Display with 20 characters x 4 lines to show the following technical parameters: + Blade speed + Number of programmed and completed cuts + Blade thickness + Feed length + Cutting time + Amperemeter + Display of over 100 diagnostic messages and alerts - NEW: Display and entry of alarm and error messages, with the option to view occurred incidents. - NEW: 600 mm material feed with stepper motor and ball screw, mounted on opposing ball bearings. - NEW: Electronic inverter for continuous blade speed adjustment from 15 to 90 rpm (optional 30 to 150 rpm). - NEW: Low-voltage control panel: Polyester membrane keypad with thermoformed and raised tactile buttons and operation confirmation signal. - Dual gear set for high sawing performance. - The saw head slides on linear double ball recirculation guides. - Coaxial cylinder with bypass valve for rapid approach and a potentiometric linear transducer for detecting head position. - Stroke of the saw bow programmable directly from the control panel for adaptation to the cutting material. - Adaptive cutting force control. - Swivel table with central pin and axial bearing for precise execution of miter cuts. - Pneumatic vertical vice. - Electric coolant pump for blade cooling and lubrication. - Chip removal brush. - Signaling lamp for program end or emergency stop. - HSS saw blade Ø 350 x 32 x 2.5 mm for solid and profile material. - Prepared for the installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication. For further technical data, please refer to the attached PDF document.

Stanje: novo, Cutting diameter: 300 mm Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Cutting range at 45° (round): 260 mm Cutting range at 45° (flat): 270 x 200 mm Cutting range at 60° (round): 180 mm Cutting range at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vise jaw opening: 335 mm Blade speed: 15 – 100 m/min Automatic feed: 600 mm Bandsaw blade dimensions: 3650 x 27 x 0.9 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (LxWxH): 3.3 x 2.83 x 2.23 m Electro-hydraulic fully automatic bandsaw, including additional: * Semi-automatic * Semi-automatic-dynamic * Manual operation Description: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical buttons for saw operation functions * Ensures reliable operation, easy and intuitive to use * Real-time monitoring of all cutting parameters * Pivoting arm allows for convenient and safe operation * Display and logging of alarms and error messages - Mitre cuts in automatic cycle from 0° to 60° on the left - Semi-automatic, semi-automatic-dynamic, and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * For performing cuts without programming Iiedpfx Ahexabavj Aok - Safety enclosure for operator protection - Infinitely variable cutting speed from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * High performance with low energy consumption - Material feed via stepper motor and ball screw spindle * Mounted on opposite ball bearings * Single stroke of 600 mm, repeatable for any length - Positioning of saw head and feeder movement via joystick - Automatic detection of cut start position - Manual blade tension control with display feedback * Via electronic converter - Automatic monitoring of cutting load * Through servo valve mounted directly on the cylinder - Coolant tray integrated in machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating manual with spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Stanje: novo, MEP COBRA 352 SX evo [Semi-Automatic] Article number: CB352SX Motor power: 1.5/2.2 kW Vice opening: 180 mm Blade dimensions: 350x32x3.4 mm Weight: 285 kg Speed: 1700 / 3400 rpm Cutting capacity at 0°: 120 / 105 / 180x70 mm Cutting capacity at 45° right: 120 / 100 / 135x60 mm Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description Semi-automatic circular saw designed for cutting solid and hollow aluminium materials and light metal alloys using an electro-welded carbide-tipped blade. Standard features: - Machine suitable for mitre cuts from 45° right to 45° left. - The vertical alignment allows for cutting operations with the head tilted between 0° and 45° to the left. - *MEP offers the latest generation of microprocessor-based controls designed for semi-automatic machines with single-axis control. - FEATURES: At cycle start: – the vice closes and the motor starts – the saw head lowers for cutting – the motor stops – the saw head lifts – the vice opens. - New – Display with 16 characters x 2 lines showing the following technical parameters: + Number of cuts performed + Cutting time + Ammeter + Display of over 100 diagnostic notifications and warnings - New – Indication and logging of alarms and error messages with the ability to review incidents that occurred. Electrical equipment: - New – Low-voltage switch panel: polyester membrane keyboard with thermoformed and raised buttons and activation control signal. - Saw bow stroke fully programmable from the control panel to be adapted to the workpiece. - Ball-bearing rotary table ensures smooth and precise rotation. - Clamping system using two face-mounted vices, which can be positioned along the longitudinal axis of the workpieces. - Adjustable mechanical stops for quick head positioning at 0° and 45° right and left. - Chip conveyor ready for OPTIONAL extraction system. - Automatic blade lubrication system, only active at the beginning of the cut. - Machine is supplied without saw blade. - Prepared for installation of the optional minimum-quantity lubrication system for the saw blade, in addition to the standard emulsified oil lubrication system. - Supplied with tools and instruction manual including spare parts list. For further technical data, please refer to the attached PDF document. Catalogue page 2! Iodpfxochkv Ij Ah Asik

Stanje: novo, Saw blade diameter: 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 x 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 / 110 mm Cutting capacity at 45 degrees: square 100x100 / 95x95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Speed: 1,700 / 3,400 rpm Control system: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight: approx. 605 kg Dimensions (L x W x H): 2210 x 1680 x 2150 mm Features: - Fully automatic CNC high-performance circular saw * for mitre cuts from 45° right to 45° left Ijdpoxaa Uxofx Ah Aoik * for cutting aluminium and light metal alloys - MEP microprocessor control * Windows "CE" based control system * user-friendly interface * up to 100 cutting programs storable * user interface with 7” touch screen display & mechanical buttons * adjustable/swing-mounted operation panel * display and logging of alarms and error messages * positioning of saw head and movement of feeder via joystick * automatic detection of cutting start position - Material feed with stepper motor and ball screw * with 600 mm stroke * can be repeated for any length cuts - Manual safety hood - Mechanical stops at -45°, 0°, +45° * allow for quick saw head positioning - Pneumatic vice system * 2x pneumatic frontal vices * including vertical vice - Heavy cast iron construction ensures vibration-free operation & maximum precision - Saw head can be tilted up to 45° - 2 saw blade speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operating and maintenance manuals

Stanje: novo, MEP COBRA 352 NC 5.0 [Fully Automatic] Article Number: CB352NC 5.0 Motor Power: 2.6 / 3.5 kW Vice Opening: 180 mm Blade Dimensions: 350x32x3.4 Weight: 600 kg Speed: 1700 / 3400 rpm Cutting Capacity 0°: 120 / 105 / 180x70 mm Cutting Capacity 45° right: 120 / 100 / 135x60 mm Cutting Capacity 45° left: Cutting Capacity 60° right: Iisdpfxjchkwhj Ah Ask Cutting Capacity 60° left: Description: Automatic cross-cut saw with semi-automatic functions for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left; saw head swivels 0°-45° to the left. Control is managed via multi-microprocessors, while two NC-controlled axes allow programming of up to 1,000 different cutting programs (each with different quantities and lengths), for the same material batch. - New centralized control console mounted on a swivel arm, allowing easy operation from any working position and ensuring the emergency stop switch is always accessible. - Fieldbus communication system with dual microprocessor and serial interface. - Display (20 characters x 4 lines) shows the following technical parameters: number of programmed cuts and completed cuts, blade thickness, feed length, cutting time, ammeter, and display of over 100 diagnostic messages and warnings. - New: Display and logging of alarm and error messages, with the ability to review logged incidents. Now with 600 mm material feed using a ball screw spindle driven by a cutting motor, mounted on opposing ball bearings. - New: Low-voltage control panel—polyester membrane keypad with thermoformed, raised buttons and actuation signal. - Saw bow stroke height programmable directly from the control panel for adaptation to different cutting materials. - Ball-bearing-mounted rotary table ensures easy and precise rotation. - Clamping system with two end-positioned vices, freely positionable along the longitudinal axis of the workpiece. - Adjustable mechanical stops for rapid positioning of the saw head at 0 and 45 degrees to the left and right. For further technical data, please refer to the attached PDF document (page 3 of the catalogue excerpt).

Stanje: novo, Cutting diameter: 330 mm Iodpfxsxaa Tzs Ah Ajik Cutting capacity at 90°: flat 510 x 320 mm Cutting capacity at 90°: square 320 x 320 mm Cutting capacity at 45°: flat 350 x 320 mm Cutting capacity at 45°: round 320 mm Cutting capacity at 45°: square 300 x 300 mm Cutting capacity at 60°: flat 230 x 310 mm Cutting capacity at 60°: square 200 x 200 mm Cutting capacity at 60°: round 200 mm Speed range: 15 - 100 m/min Saw band dimensions: 4640 x 34 x 1.1 mm Motor power: 4.0 kW Weight: 1190 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Suitable for mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Rotatable, located at front right - Optional manual or automatic lowering of the saw bow * Infinitely variable saw bow descent adjustment - Carbide blade guides - Hydraulic blade tensioning – including digital value display - 2x blade speeds - 1x Bi-metal saw band - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functions: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, MEP COBRA 352 MA Article number CB352MA Motor Power 2.2 kW Bench Opening 180 mm Blade Dimensions 350x32x3.4 mm Weight 210 kg Speed 1700/3400 rpm Cutting Capacity 0° 120 / 105 / 180x70 mm Cutting Capacity 45° right 120 / 100 / 135x60 mm Cutting Capacity 45° left --- Cutting Capacity 60° right --- Cutting Capacity 60° left --- Description Ijdpjchku Sjfx Ah Aoik Manual circular saw for cutting aluminium; mitre cuts from 45° right to 45° left; saw head swivels from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered. Standard Equipment: - Roller-mounted turntable for quick and precise mitre adjustment - Locking system to secure the saw head at any angle - Automatic blade lubrication - Clamping system consisting of two vices - Saw head lock in upper position - Adjustable length stop for repeat cuts - Vice opening 180 mm - Includes tools and operator’s manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operations-ready indicator lamp - Main safety switch - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - Switch handle with protection class IP 55 - Low voltage circuit 24 Volt - Motor 1.5/2.2 kW - 400 Volt For further technical data, please refer to the attached PDF document.

Stanje: novo, Cutting diameter: 180 mm Cutting capacity at 90°: square 180 x 180 mm Cutting capacity at 90°: flat 200 x 150 mm Cutting capacity at 45°: round 115 mm Cutting capacity at 45°: square 110 x 110 mm Cutting capacity at 45°: flat 125 x 110 mm Cutting capacity at 60°: flat 70 x 70 mm Cutting capacity at 60°: square 70 x 70 mm Cutting capacity at 60°: round 70 mm Blade speed range: 40 / 80 m/min Saw blade length: 2,130 x 20 x 0.9 mm Total power requirement: 0.75 kW Iedpfx Ahjxaa Tno Asik Machine weight approx. 190 kg Equipment: - compact / robust manual band saw - with single-sided mitre device up to 60° to the left - hydraulic lowering of the saw bow * infinitely variable feed adjustment * automatic cut-off at end of cut - 2x saw blade speeds - saw blade guide with carbide plates - manual vice with quick-release - machine base - coolant system - manual saw blade tension (star grip at front) - 1x angle stop - 1x metal saw blade - operating manual

Stanje: novo, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent Authorized MEP Dealer – Please send us your inquiry! Motor Power: 1.5 / 1.8 kW Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting Speed: 40 / 80 m/min. Iiodpfx Ascgbt Rsh Ask Cutting Capacity at 0°: 300 / 260x260 / 330x260 mm Cutting Capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting Capacity at 45° left: 200 / 180x180 / 200x160 mm Cutting Capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting Capacity at 60° left: – Description – MEP Sawing Machine: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting cycle is initiated. The descent is performed by gravity, counterbalanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is raised manually to the required position for material feed. Equipment features: - Electrical control panel (clearly marked wiring, ready status indicator, main safety switch with provision for padlock, speed switch/selector, emergency stop, thermal-magnetic protection, 24V low voltage system) - Electronic blade tension converter with display - Manual vice with quick-clamping - Base frame with coolant tray and chip drawer (can be replaced by a motorized chip conveyor – optional) - Electric coolant pump for band cooling and lubrication - Chip removal brush - Adjustable precision back gauge for repeatable cut lengths - Designed for pallet truck transport - Bi-metal blade for solid and profile material - Includes tools and user manual Motor: 1.5 / 1.8 kW 2 cutting speeds: 40 / 80 m/min Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg For cutting data, see image. For further technical details, please refer to the attached PDF document.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left Iisdpsxaa S Refx Ah Ajk * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90° (flat): 280 x 200 mm Cutting range at 90° (square): 230 x 230 mm Cutting range at 45° (round): 190 mm Cutting range at 45° (flat): 180 x 180 mm Cutting range at 45° (square): 180 x 180 mm Isdpfexaa H Isx Ah Aoik Cutting range at 60° (flat): 110 x 110 mm Cutting range at 60° (square): 110 x 110 mm Cutting range at 60° (round): 120 mm Vice opening: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic lowering of the saw bow * With infinitely adjustable feed * End stop at end of cut - Manual cutting function selectable - 2x band saw speeds - Carbide blade guides - 1x saw blade - 1x angle stop - Integrated chip cleaning brush - Operator panel - front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing unit