Mep Italien nakup rabljenega (118)

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support Hjdjfm T Hbopfx Ab Sjw • Sensors for material start detection • Clamping pressure adjustment • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.

Stanje: dober (rabljeno), Leto izdelave: 2014, Metal band saw, bandsaw machine, bandsaw, mitre bandsaw machine - Manufacturer: MEP, mitre bandsaw machine for cuts from 45° right to 60° left - Model: Shark 332 CCS Hodpfowtly Njx Ab Sew - Drive power: 1.8 kW - Cutting capacity, flat: 90° 330 x 270 mm / 45° 270 x 200 mm - Cutting capacity, round: 90°/45° 300 mm / 260 mm - Maximum cutting height: 300 mm - Maximum cutting width: 270 mm - Saw band speed: adjustable, 20 - 90 m/min - Saw band: 3320 x 27 x 0.9 mm - Coolant system - Dimensions: 2070/1190/H1620 mm - Total weight: 697 kg

Leto izdelave: 1998, Stanje: dober (rabljeno), številka stroja/vozila: 080024-38 U, Offer 23332 Technical Specifications: - Saw blade dimensions: 250 x 2 x 40 mm - Saw blade spindle speed: 52 rpm - Cutting capacity at 90° round: 80 mm flat: 95 x 60 mm - Mitre adjustable up to: 45° - Material vice - Drive: 400 V / 0.5 kW - Space requirement approx.: W 650 x H 1500 x D 750 mm - Weight approx.: 100 kg Hedpfx Abjp Ebn Se Sow

Stanje: novo, Length: 1500 mm Hjdpfxefxu Tke Ab Ssw 6 steel tube rollers, width: 185 mm Diameter: 20 mm Continuously adjustable height: 650 – 1030 mm Required space: 1500 x 250 x 650/1030 mm

Stanje: novo, Cutting diameter: 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: -- mm Cutting diameter: 350 mm Cutting speed: 15 - 100 m/min Total power requirement: 4.0 kW Machine weight approx. 2,800 kg Space requirement approx. 2200 x 3200 x 2200 mm Fully automatic band saw with dual-column guide for series cuts, especially in difficult-to-machine materials and solid stock. With this machine, MEP offers you a technologically state-of-the-art solution that, thanks to the use of premium materials, features an exceptionally robust and torsion-resistant structure. An extremely sturdy saw frame made of cast iron ensures the necessary stability for outstanding cutting results, and the heavy-duty cast iron columns—over which the saw frame glides on preloaded linear guides—ensure maximum cutting precision even under peak loads. The advanced machine control (MEP NC 5.0) offers the operator maximum ease of use and ensures trouble-free operations (real-time monitoring/evaluation/correction). MAXIMUM PERFORMANCE > Two operating modes (semi-automatic and automatic) allow for efficient cutting under all conditions. > The control allows you to store up to 100 cutting programs with different quantities and lengths, minimizing programming time for recurring jobs. Hsdpolf Tu Uefx Ab Sow > Automatic detection of the saw head start position reduces setup times. > The saw head feed via linear guides driven by hydraulic cylinders with preloaded recirculating ball bearings reduces mechanical vibration during cutting and increases stability. > The automatic alignment of the front saw blade guide head according to the dimensions of the stock to be cut reduces processing time. > Saw blade tensioning is controlled by a brushless motor and is continuously monitored and automatically adjusted to the preset minimum value. EXTREMELY FLEXIBLE > The feed system with a 600 mm stroke is repeatable and able to cut all lengths. > The vertical roller pair allows any type of bar or bundle being fed to be held and aligned. > The vector inverter for infinitely variable adjustment of the blade speed from 15 to 100 m/min enables cutting of all materials. > The motorized chip conveyor can be mounted either to the right or left of the cutting area. FEATURES: Fully automatic control – NC 5.0 - Innovative (Windows CE-based) touch screen control with additional soft-touch buttons for frequent operations - USB port - Joystick for manual axis control (X-Y) - Controlled saw head descent with automatic compensation via a servo valve mounted in the cylinder, continuous monitoring of the preset torque, and precise feed rate adjustment in mm/min - Adjustable/infinite preselection of band speed in m/min - Saw band tensioning with tension monitoring and display via an electronic transducer - Automatic detection of cut start - Large 7" color touch screen for display and selection of all machine functions and parameters, with rapid programming. Displays detailed alarm and error messages - Numerous...

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Hjdpfx Abefg E H Ie Ssw Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Precision degree markings on the cast iron frame Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering instructions in user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Leto izdelave: 2001, Stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: rpm - Cutting capacity - at 90° round: 90 mm - or square: 80 mm - Pneumatic vices - Automatic material feed with position control - Single stroke up to approx. 1000 mm Hodpfxsd Aai To Ab Sjw - Multiple stroke - Swiveling operator panel with CNC control MEP - Motorized dust extraction + mobile chip extraction - Drive: 400 V / 1.1 kW - Required space: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Stanje: skoraj kot novo (rabljeno), Overall length: 1500 mm Width: 500 mm Height adjustable with leveling feet: +/- 900 mm Hedpfxofn Thhj Ab Sjw 6 rollers, diameter: 60 mm Roller width: 430 mm

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. Hjdpfx Aofg E Hzob Sew + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: rabljeno, Leto izdelave: 2007, Premer reza 250 mm Dolžina tračne žage 2950 x 27 x 0,9 mm Hitrost traku 36/72 m/min Hedsxfwbyepfx Ab Sjw Skupna potrebna moč 1,8 kW Teža stroja cca 320 kg Dimenzije DxŠxV 1,5 x 0,9 x 1,4 m

Stanje: rabljeno, Leto izdelave: 2001, Premer rezanja 210 mm Območje rezanja pri 90 stopinjah: ploščato 270 x 200 mm Območje rezanja pri 90 stopinjah: kvadratno 200 mm Območje rezanja pri 60 stopinjah: okroglo 90 mm Območje hitrosti: 36 / 72 m/min Hodpsxlufisfx Ab Ssw Moč motorja 0,7 / 0,81 kW Dimenzije tračne žage 2750 x 27 x 0,9 mm Teža stroja pribl. 0,4 t Dimenzije DxŠxV 0,8 x 1,4 x 1,5 m Tračna žaga z Autocut - Naprava za poševno rezanje max. 60° - Naprava za hlajenje

Stanje: novo, Saw blade diameter: 130 mm Cutting capacity at 90° (round): 130 mm Cutting capacity at 90° (square): 120 mm Cutting capacity at 90° (flat): 180 x 100 mm Cutting capacity at 45° (round): 115 mm Cutting capacity at 45° (square): 100 mm Cutting capacity at 45° (flat): 120 x 100 mm Motor: 3.3 / 4.4 kW Speed: 1400 / 2800 rpm Hodpshpktyefx Ab Sew Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electromechanical vertical circular saw designed for use with carbide saw blades, suitable for serial cuts from 45° right to 60° left.

Stanje: novo, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Hodpfx Abefg E Iaj Sjw Key features: - Swiveling control panel mounted on a vertical post - 420 mm large rotary table with roller bearing, preloaded thrust bearing, and interchangeable steel inserts - Dual blade speed (40/80 m/min)

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported. Hjdpfx Absfg E Ibo Sow

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight: approx. 0.615 t Space requirement: approx. 1.4 x 1.4 x 2.0 m Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: • Saw head runs on recirculating ball linear double guides • Three-stage gearbox • Infinitely variable blade speeds 15–150 rpm • Vice jaw opening: 190 mm • Saw head stroke programmable directly via control panel, for adaptation to the cutting material • Pneumatic vertical vice Hodpfx Asfg Rldob Sow • Saw blade HSS DMO 5 Ø 370x32x3 for solid and profile material • Vice with counterhold device for double workpiece clamping • Machine base with removable coolant tray • Chip removal brush • Length stop for identical length cuts • Material support arm, with connection option for roller conveyor/loading side

Stanje: novo, Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 115 mm Cutting capacity at 90 degrees, square: 100 mm Cutting capacity at 90 degrees, flat: 130 x 80 mm Cutting capacity at 45 degrees, round: 100 mm Hodjfmck Hspfx Ab Sow Cutting capacity at 45 degrees, square: 85 mm Cutting capacity at 60 degrees, flat: 90 x 80 mm Clamping range: 130 mm Speed: 30 / 60 rpm Saw blade dimensions: 350 x 32 x 2.5 mm Total power requirement: 1.1 / 2.2 kW Machine weight approx. 0.22 t Space requirement approx. 1200 x 860 x 900 mm Manual chop saw for miter cuts from 45° left to 45° right. Steel worm gear, double ball bearing mounted Saw blade shaft mounted on an eccentric made of spheroidal cast iron Bronze gear wheel with key and conical clutch for maximum power transmission to the steel worm gear Vice with adjustable guide strips Adjustable anti-burr device (enables burr-free cutting) Length stop Double return springs Main safety switch Emergency stop button Speed selector switch Electric coolant pump for lubrication and cooling of the saw blade (option to fit a micro-spray unit) Motor 1.5/1.8 kW - 400 Volt Optional base frame €361

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 105 mm Cutting range at 90 degrees: flat 180 x 70 mm Cutting range at 45 degrees: round 120 mm Cutting range at 45 degrees: square 100 mm Cutting range at 45 degrees: rectangular 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Hsdpfefc T Ugox Ab Ssw Semi-automatic circular saw for cutting solid and hollow aluminum materials and light metal alloys, equipped with an electro-welded, carbide-tipped saw blade. Machine designed for miter cuts from 45° right to 45° left. Thanks to the adjustable vertical orientation, it is possible to perform cutting operations with a head inclined between 0° and 45° to the left.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Hodpfx Aefg E H Rob Sow Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: rabljeno, Leto izdelave: 1999, Premer žaginega lista 275 mm Območje reza pri 90 stopinjah: okroglo 80 mm Območje reza pri 90 stopinjah: kvadratno 70 mm Območje reza pri 90 stopinjah: ploščato 100 x 60 mm Območje reza pri 45 stopinjah: okroglo 70 mm Območje reza pri 45 stopinjah: kvadratno 60 mm Območje reza pri 60 stopinjah: ploščato 80 x 50 mm Območje vpenjanja 110 mm Število obratov 45 / 90 vrt/min Skupna potrebna moč 0,5 kW Hedpfx Abol R Nnno Sjw Teža stroja cca 0,07 t Potrebna prostora cca 900 x 700 x 1600 mm Ročna hladna krožna žaga z: - Strojno podnožje - Podporno letev 1500 mm

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120/110 mm Cutting range at 45° (square): 10/95 mm Cutting range at 45° (flat): 135 x 60 mm Hjdpfx Ajfg Rlgeb Sow Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, circular saw automatic machine with semi-automatic function, for sawing aluminium and light metal alloys, designed for use with carbide-tipped circular saw blades. Machine suitable for mitre cuts from 45° right to 45° left. The vertical axis alignment allows for sawing operations with the head inclined from 0° up to 45° to the left. Numerically controlled circular sawing machine equipped with a new Windows CE-based control system, specially developed by MEP for automatic machines.

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 120 mm Cutting capacity at 90 degrees, square: 105 mm Cutting capacity at 90 degrees, flat: 180 x 70 mm Cutting capacity at 45 degrees, round: 120 mm Cutting capacity at 45 degrees, square: 100 mm Cutting capacity at 45 degrees, flat: 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight: approx. 0.210 t Dimensions (L x W x H): 0.9 x 1.4 x 1.4 m Manual circular saw for cutting aluminium, capable of mitre cuts from 45° right to 45° left, with saw head swivelling from 0° to 45° to the left. On the COBRA 352 MA version (with automatic vice), the vices close automatically when the saw head is lowered. Hsdpofc T Ufofx Ab Sow • Roller-guided rotary table for fast and precise mitre adjustment • Screw lock for fixing the saw head at any angle • Automatic saw blade lubrication • Clamping system consisting of two vices • Saw head locking in upper position • Adjustable length stop for repetitive cuts of identical length • Vice opening: 180 mm

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Key Features: - New centralized control console on an articulated arm. - Low voltage control panel: - Polyester membrane keyboard with thermoformed raised buttons and operating control signal. - Display showing: * Diagnostics (messages in user language) * Alarms (description of alarm reasons) * Status of inputs and outputs * Cut counter * Time elapsed per completed cut * Saw blade motor current * Saw blade tension * Saw blade speed * Numerical display of head position - Manual 24V cycle selector switch IP55. - Complete program of all special cutting cycles. - Identification of additional special cutting cycles for specific applications. - New generation, highly efficient hydraulic control unit with low energy consumption. Hjdjfg E H Uopfx Ab Sjw - Rotary table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual band speed (40/80 m/min.) with control - Prepared for installation of electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to adapt to the workpiece material. - Clamping device can be shifted left/right, with quick-release vice. - Manual blade tension control with screen display via electronic converter. - Machine base designed to fully collect coolant, even during maximum angle cuts. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced with a chip conveyor – see optional accessories) integrated in the base. - Preparation for the installation of minimal blade lubrication set (optional, in addition to the standard emulsion oil lubrication system). - Integrated chip removal brush. - Machine designed for pallet truck transport. - Adjustable length stop for repeat cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the relevant user language.

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Hjdpfjfg E H Tjx Ab Sew Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: rabljeno, Leto izdelave: 2004, Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 115 mm Cutting capacity at 90 degrees, square: 95 mm Cutting capacity at 90 degrees, rectangular: 180 x 95 mm Working height: 940 mm Saw blade speeds: 15-30-45-90 rpm Total power requirement: 3.15 kW Machine weight: approx. 0.9 t Space requirement: approx. 1.9 x 1.1 x 2.1 m Electropneumatic, linear-guided automatic saw - Infeed roller conveyor 1500 mm - Micro-spray device Hsdpfov Rgxpox Ab Sew - Good condition

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Vice: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic-dynamic and manual operation, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Semi-automatic function: At the start of the cycle: – Vice closes, motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position, then starting the cycle via hand button). Some features: - New centralised control panel on an articulated arm for easy operation from any working position. - Low-voltage operating panel: - Polyester membrane keypad with thermoformed, raised buttons and actuation control signal. Hsdpfx Abefg E H Ss Ssw - Display shows: * Diagnostics (messages in the user’s language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time used for completed cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position - IP55 manual 24 V cycle switch lever - Complete program for all special cutting cycles - Possibility to define other special cutting cycles for specific applications - New, latest-generation hydraulic control unit, highly efficient and energy-saving - Large work surface with turntable on roller bearings (265 mm), fitted with preloaded thrust bearing - Dual band speed (36/72 m/min.) with control panel - Prepared for installation of an electronic inverter for stepless band speed regulation from 20 to 90 m/min. - Adjustable saw head stroke controlled directly from the panel to adapt to the workpiece height - Clamping device can be shifted laterally left and right, featuring quick-action vice - Manual blade tension control, display on screen via electronic converter - Machine base with pull-out coolant tray - Electric coolant pump for saw blade cooling and lubrication - Prepared for installation of optional minimum-quantity lubrication system, in addition to the standard emulsion oil lubrication - Swarf removal brush - Machine suitable for pallet truck transport - Length stop for repetitive cuts - Material support arm with roller, to attach loading table - Bimetal saw blade for solid and profile material - Tools and user manual in the language of the operator