Kopiranje Stružnica nakup rabljenega (3.154)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Swing diameter over bed 32 mm Spindle bore 32 mm Turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 Spindle speeds 7,000 rpm Workpiece length – max. 150 mm Clamping diameter 32 mm Feed rate 0 – 2,000 mm/min Machine weight approx. 5.7 t Space required approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, ready for immediate use, and is supplied with tool holders and spare parts. Iedpfsxq Hk Uox Abxsic >> There are two identical STAR 32T sliding headstock automatic lathes available.

Stanje: rabljeno, L + Z stružnica PRÄWEMA Št. stroja: 903 Leto izdelave: 1968 Iiedjzc Nt Rjpfx Abxec Razdalja med konicama: 1000 mm Premer struženja nad posteljo: 400 mm Premer struženja nad podporo: 240 mm Višina konic nad posteljo: 200 mm Višina konic nad podporo: 120 mm Vrtina vretena: 36 mm Pomik: vzdolžno in prečno Namestitev vpenjalne glave: kratek stožec DIN 55027 Gr.6 4x M12 Notranji stožec konjička: MK 4 Pomik pinole: 120 mm Hitrost vretena: 25 - 3000 obr./min, 18 stopenj Pogonska moč: 4 kW Priklop na omrežje: 380 V, 50 Hz - Hitrost vretena prek 18 stopenj menjalnika - 3-čeljustna vpenjalna glava RÖHM Ø 250 mm z enim kompletom stopničastih čeljusti - Vrtljiv univerzalni nosilec orodja - Gumb za izklop v sili - Menjalna zobniška kolesa Dimenzije (D x Š x V): 2100 x 850 x 1350 mm Teža: 1260 kg

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1324, izvrtina vretena: 42 mm, skupna dolžina: 2.000 mm, skupna širina: 1.000 mm, skupna višina: 1.800 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 22 obr/min, skupna masa: 1.500 kg, WEILER CONDOR B vodilni in pogonski vretenasti stružni stroj - Obratovalna napetost: 380 V - Krmilna napetost: 220 V - Priključna moč: 3 kW - Nazivni tok: 25 A - Frekvenca: 50 Hz Iiodpfoyiztijx Abxoc - Dolžina med konicami: ca. 700 mm - Višina konice nad ležiščem: 170 mm - Premer struženja nad ležiščem: 340 mm - Višina konice nad suportom: 100 mm - Premer struženja nad suportom: 200 mm Stroj je opremljen z konjičkom, multifix držalom za stružni nož, tip B, ter trikrako glavo proizvajalca RÖHM, premer: 150 mm, dodatno z digitalnim prikazovalnikom proizvajalca ELESTA, tip: VISULESTA 4, vključno z ustrezno delavniško predalno omaro in ustreznimi dodatki k stroju. FCA D-73235 Weilheim Teck - naloženo na tovornjak

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 308888, premer struženja nad prečnim suportom: 210 mm, izvrtina vretena: 40 mm, premer struženja nad ležiščem sani: 300 mm, stružna dolžina: 1.000 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 40 obr/min, Premer struženja v izrezu: 480 mm, premer puše konjička: 42 mm, Gib pinole konjička: 110 mm, - With digital display from manufacturer ACU-RITE - Equipped with tailstock, Multifix quick-change tool post, and three-jaw chuck (Ø 150 mm) - Width in front of faceplate: 115 mm - Leadscrew diameter: 28 mm - Thread pitch: 6 mm Iedjwxratepfx Abxjic - Feed (16 metric): 0.03 – 2 mm/rev - Cross slide width: 140 mm – Travel: 190 mm - Top slide width: 82 mm – Travel: 92 mm - Tool holder size: 16 x 20 mm

Stanje: rabljeno, Leto izdelave: 2003, Machine hours: 1594 h Technical data: - Swing diameter over bed: 320 mm - Swing diameter over cross slide: 150 mm - Centre distance, approx.: 800 mm - Chuck diameter: 200 mm - Spindle size: 6 Iiodpfx Abowlhn Hjxsc - Spindle taper: MK 6 - Speed range: 14 - 3550 rpm - Cross travel: 185 mm - Spindle bore: 52 mm - Quill diameter: 70 mm - Quill taper: MK 5 - Quill stroke: 120 mm - Max. torque: 32 Nm - Number of gearbox speeds: 2 - Drive power: 7 kW - Tool holder Multifix: Size B - Dimensions (LxWxH), approx.: 2600 x 1440 x 1800 mm - Weight, approx.: 1500 kg Control: SINUMERIK 810DE-L CCU0 (cycles for taper turning and thread cutting)

Stanje: novo, TC 165 x 750V Ijdpfoir Igwjx Abxoic Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2,000 rpm Mechanical gearbox stages: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral offset: ± 10 mm Weight, approx.: 650 kg Features: - Inspection certificate to DIN standards - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant Meehanite cast iron beds, stress-relieved and extensively ribbed for maximum smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse pushbutton for main spindle - CE / IEC as well as German documentation and German service Standard equipment (included accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way toolpost - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle guard in compliance with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test report - Safety guards and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Multifix quick-change toolpost system Also available as a geared head variant.

Stanje: novo, TC 180 x 1000 V Centre distance: 1000 mm Centre height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 – 2,500 rpm Mechanical speed ranges: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 – 1.96 mm/rev Cross feed X: (40) 0.022 – 0.98 mm/rev Metric threads: (32) 0.4 – 7.0 mm Inch threads: (32) 4 – 56 TPI Module threads: (32) 0.4 – 7.0 Diametral pitch threads: (32) 7.5 – 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1,880 x 880 x 1,390 mm Features: - Acceptance test certificate according to DIN - Precision, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric brake (V models) - Torsion-resistant machine bed made of Meehanite quality cast iron, stress-relieved and heavily ribbed for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Feed gearbox overload protection - Pulse button for main spindle - CE / IEC-compliant, with German documentation and German service Standard equipment (basic accessories): - Machine stand with rear splash guard - 3-jaw chuck - 4-position toolholder - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle cover compliant with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test certificate Iodpeir Imyjfx Abxsic - Safety devices and electrical equipment compliant with CE - Reducing sleeve for main spindle - Operating tools Available options for this lathe: - 3-axis digital readout - Multifix quick-change toolpost system Also available with gearbox variants

Stanje: novo, Centre height: 250 mm Swing diameter over cross slide: 350 mm Swing diameter in gap: 695 mm Distance between centers: 1,500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2,200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral pitch threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions (LxWxH), approx.: 2,900 x 1,175 x 2,040 mm Weight, approx.: 2,200 kg Features: - Toolmaker’s accuracy - Stepless speed control (3 headstock ranges) Ijdpfxogt E Ile Abxeic - Dynamically balanced main spindle - Rigid machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in main spindle - Easy-to-operate feed gearbox with wide feed range in fully enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge - CE certified Equipment: - 3-axis digital readout (resolution 0.005 mm) - Frequency inverter - Machine stand with high splash guard and integrated lighting - Front pull-out chip tray - 3-jaw chuck - Fixed steady rest - Travelling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop buttons and foot pedal with electric braking system - Safety interlocked chuck guard, tool post guard, and lead & feed screw covers compliant with CE European safety standards - Coolant system - Fixed centre - Reducing sleeve for main spindle - Operating tools in toolbox

Stanje: novo, Made in Italy Machine in accordance with DIN 8606 Centre height: 260 mm Swing over bed: 520 mm Swing over cross slide: 300 mm Distance between centres: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1,600 rpm (option: 11 - 2,000 rpm) Motor power: 5.5 kW (option: 7.5 kW) Iodpfxedvm Euo Abxeic Feed Z-axis: (93) 0.028 - 6.43 mm/rev Feed X-axis: (93) 0.012 - 2.73 mm/rev Thread cutting, metric: (54) 0.5 - 224 mm Thread cutting, Whitworth: (55) 72 - 1/8 TPI Thread cutting, module: (54) 0.5 - 112 mm Thread cutting, diametral pitch: (54) 64 - 1/4 D.P. Cross slide (LxW): 650 x 230 mm Cross slide travel: 340 mm Top slide (LxW): 350 x 150 mm Top slide travel: 150 mm Tailstock quill diameter: 85 mm Tailstock quill stroke: 200 mm Tailstock taper: MT 5 Weight: approx. 3,100 kg Features: - Tailstock movement pneumatically assisted - Acceptance report according to DIN 8605; precision lathe with increased accuracy - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X and Z axis - Electrical equipment made from high-quality brand components, e.g. Siemens/Schneider - Manual lubrication of guideways via hand pump - Reducing sleeve - 2 fixed centres - All safety devices conform to CE standards: Chuck guard with plexiglass window, micro limit switch secured. Tool holder guard with plexiglass window. Rear splash guard over the entire length. Leadscrew and feed rod guards with light curtain (integrated into emergency stop circuit). Emergency stop button. - Chip container on wheels - Electric coolant device - Fixed steady rest - Travelling steady rest - Operating tools, acceptance report according to DIN, operating and maintenance manual, complete electrical installation, machine built to the latest CE standard.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.496 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 600 mm, stružna dolžina: 510 mm, premer struženja: 300 mm, izvrtina vretena: 51 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 205 mm, pomik po osi Z: 560 mm, moč vretenovega motorja: 15 W, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 36 m/min, vrsta vhodnega toka: Klimatska naprava, skupna masa: 3.600 kg, moč: 30 kW (40,79 KM), vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 5-axis CNC lathe "DN Solutions model LYNX 2100LMSA" equipped with sub-spindle, live tooling, and FANUC i-PLUS iHMI CNC, complete with "TOP model FUSION" bar feeder. Iiedpjtq Aylofx Abxoc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 259 h, premer struženja nad prečnim suportom: 790 mm, stružna dolžina: 2.124 mm, premer struženja: 550 mm, izvrtina vretena: 102 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 30 obr/min, potovalna razdalja osi X: 352 mm, pomik po osi Z: 2.155 mm, moč vretenovega motorja: 35 W, hitro pomikanje X-os: 16 m/min, hitri pomik na osi Z: 20 m/min, 2-axis CNC lathe "DNS mod. PUMA 4100LA" with DN Solutions-Fanuc i-Plus iHMI CNC Ijdpfx Ajqrr Nwebxjic

Stanje: pripravljen za uporabo (rabljen), Izdelovalec: Ikegai - Japonska Tip: TNC 75 Leto izdelave: 1990 Krmiljenje: Fanuc 15-T Isdezdrm Iepfx Abxoic Tehnični podatki: - Višina konic nad ležiščem: 750 mm - Višina konic nad tlemi: 1380 mm - Premer vrtenja nad ležiščem: 1500 mm - Premer vrtenja nad suportom: 1200 mm - Največja razdalja med konicama: 7000 mm - Postelja (širina x višina): 1500 x 630 mm - Postelja, skupna dolžina: 10.200 mm - Vretenasta glava: JIS A2 št. 20 - Stožčasta izvrtina vretena: Ø 100, stožec 1:10 - Premer sprednjega ležaja vretena: 280 mm - Premer zadnjega ležaja vretena: 240 mm - Hitrost vrtenja: 2,5 - 250 min⁻¹, brezstopenjsko, 2 območji (H: 10 - 250, L: 2,5 - 60 min⁻¹) - Hitri pomik X-os: 2000 mm/min - Hitri pomik Z-os: 4000 mm/min - Hitri pomik konjička: 2000 mm/min - Pomik X-os: 560 mm - Pomik Z-os: razdalja med konicama + 200 mm - Konjiček: vgrajena so-vrteča se konica z lastnim pogonom in merilnikom radialne sile - Premer pinole konjička: 260 mm - Stožčasta izvrtina konjička: MK št. 7 - Hod pinole konjička: 350 mm Stanje: V dobrem, delujočem stanju.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 90 mm, premer struženja: 630 mm, premer struženja nad ležiščem sani: 630 mm, premer struženja nad zgornjim sanežem: 380 mm, stružna dolžina: 3.000 mm, premer tulec: 90 mm, skupna dolžina: 4.900 mm, skupna širina: 1.420 mm, skupna višina: 1.590 mm, največja hitrost vrtenja: 1.800 obr/min, vrtljajska hitrost (min.): 18 obr/min, skupna masa: 3.700 kg, teža obdelovanca (maks.): 1.500 kg, nosilec vretena: MK 6, The universal lathe FAT TUR 630M/3M has been extensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, complies with the technical acceptance requirements of the WOT and Polish standards, and also fulfills all EU directives. The machine comes with a full 12-month warranty covering spare parts and electrical components. Availability: in stock, powered on, and ready for technical inspection. Technical data: - Distance between centers / turning length: 3000 mm - Swing over bed: 630 mm - Swing over cross slide: 380 mm - Spindle bore diameter: 90 mm - Maximum workpiece weight between centers: 1500 kg - Number of spindle speeds: 21 - Spindle speed range (RPM): 18 – 1800 - Feed range (mm/rev): Longitudinal: 0.05 – 3.26 Cross: 0.25 – 1.63 - Motor power: 15 kW Iedpfxsd Eaa Ej Abxjic - Overall dimensions: Total length: 4900 mm Width: 1420 mm Height: 1500 mm Total weight: 3650 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chucks, various diameters and types - Digital Read Out for 2 axes, including display, installation, and calibration - Steady rest 10-140 mm, with rollers - Steady rest 10-180 mm, with rollers - Steady rest 140-300 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 8.000 mm, skupna dolžina: 10.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 9.200 kg, The universal lathe PORĘBA TPK-90A1/8M has been comprehensively rebuilt and modernised by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets WOT technical acceptance requirements and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrics. Iisdpfsyi U Rbsx Abxoc Availability: available from stock, powered up, and ready for inspection at any time. Technical data: - Distance between centres / turning length: 8,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore diameter: 95 mm - Max. workpiece weight between centres: 6,000 kg - Max. workpiece weight between centres + 1 steady rest: 7,500 kg - Max. workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Installed inverter/variable frequency drive for soft start - Overall dimensions: Total length: 10,500 mm Width: 1,800 mm Height: 1,865 mm - Total weight: 9,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder (without steady rests) Optional equipment at extra cost: - 3- or 4-jaw chuck, various diameters and versions - 2-axis digital readout, including display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 105 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 3.000 mm, skupna dolžina: 5.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, skupna masa: 11.400 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B/3M has been extensively rebuilt and modernized by us. It features technical specifications that fully correspond to the technical and operational documentation of a new machine, complies with the technical acceptance conditions of WOT and Polish standards, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: overhauled to order, delivery time 3.5 months from order placement Technical data: - Distance between centers / turning length: 3000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm Isdpsdy I I Aefx Abxjic - Swing in gap: 1650 mm - Spindle bore: 105 mm - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 - Main motor power [kW]: 27/41 (1st / 2nd gear) - Overall dimensions: - Total length: 5500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 11400 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chucks, various diameters and versions - Digital readout for 2 axes, including display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 10.000 mm, skupna dolžina: 12.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/10M has been comprehensively rebuilt and modernised by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical acceptance requirements of the WOT and the Polish standard, and also complies with EU regulations. A full 12-month warranty on spare parts and electrics applies to the machine. Availability: custom general overhaul, delivery time 3.5 months from order placement Technical data: - Centre distance / turning length: 10,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore: 120 mm - Maximum workpiece weight between centres: 9,000 kg - Maximum workpiece weight between centres + 1 steady rest: 12,000 kg - Maximum workpiece weight between centres + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: Length: 12,500 mm Width: 2,130 mm Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra charge: Ijdpfx Askh Hbhjbxjic - 3- or 4-jaw chucks in various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 5.000 mm, skupna dolžina: 8.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 8.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TPK-90/5M has undergone a comprehensive overhaul and modernization by us. It features technical specifications that correspond to the operating and technical documentation of a new machine, complies with WOT technical acceptance requirements, Polish standards, and also meets all EU directives. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: In stock, under power, ready for inspection at any time Technical specifications: - Distance between centers / Turning length: 5,000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1,200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 1,800 mm Height: 1,800 mm Total weight: 7,300 kg Iijdpowk Iq Esfx Abxoc Standard equipment: tailstock, coolant pump, chuck guard, tool holder Optional equipment (available at extra cost): - 3- or 4-jaw chucks, various sizes and versions - Digital Read Out for 2 axes, incl. display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 6.000 mm, skupna dolžina: 8.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, skupna masa: 14.100 kg, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B1/6M has been extensively rebuilt and modernised by us. It features technical specifications that comply with the technical and operating documentation of a new machine, satisfies the technical acceptance conditions of the WOT and the Polish standard, and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrics. Availability: overhauled to order, delivery time 3.5 months from placement of order Technical data: - Centre distance / turning length: 6,000 mm - Swing over bed: 1,350 mm - Swing over support: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centres: 8,000 kg - Max. workpiece weight between centres + 1 steady rest: 10,000 kg - Max. workpiece weight between faceplate teeth + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 14,100 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Iijdjfhk Inopfx Abxjc Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, skupna masa: 12.900 kg, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B2/5M has been thoroughly rebuilt and modernized by us. Its technical specifications match those of a new machine’s technical and operational documentation, fulfill the acceptance criteria of WOT and Polish standards, and also meet EU requirements. The machine comes with a full 12-month warranty covering spare parts and electrical components. Availability: General overhaul to order, delivery time 3.5 months from order placement. Technical Data: - Distance between centers/Turning length: 5000 mm - Swing over bed: 1350 mm - Swing over cross slide: 1000 mm - Swing in gap: 1650 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 Iodpfx Abei Apiljxjic - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st/2nd gear) - Overall dimensions: - Total length: 7500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 12900 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment at extra cost: - 3- or 4-jaw chucks, various diameters and variants - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolholder

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 105 mm, premer struženja: 900 mm, premer struženja nad ležiščem sani: 900 mm, premer struženja nad zgornjim sanežem: 570 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vretena: 630 obr/min, hitrost vretena (min.): 5 obr/min, nosilec vretena: MK 6, The universal lathe PORĘBA TR-90B/5M has been thoroughly rebuilt and modernized by us. It features technical specifications that match the technical and operating documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: complete overhaul to order, delivery time 3.5 months from order placement Technical data: - Center distance/turning length: 5000 mm - Swing over bed: 900 mm - Swing over cross-slide: 570 mm - Swing in gap: 1150 mm - Spindle bore diameter: 105 mm - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between faceplate dogs + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power: 27/41 kW (1st/2nd gear) Isdpfonnz Sxsx Abxoic - Overall dimensions: - Total length: 7500 mm - Width: 2130 mm - Height: 1550 mm - Total weight: 13,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change toolpost

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.550 mm, premer struženja nad ležiščem sani: 1.550 mm, premer struženja nad zgornjim sanežem: 1.220 mm, stružna dolžina: 10.000 mm, skupna dolžina: 12.500 mm, skupna širina: 1.600 mm, skupna višina: 1.600 mm, teža obdelovanca (maks.): 15.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-155B2/10M has been extensively rebuilt and modernized by us. It features technical specifications that are fully compliant with the technical and operating documentation of a new machine, meets the technical acceptance requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: General overhaul upon order, delivery time 3.5 months from commissioning Technical data: - Centre distance/turning length: 10,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Maximum workpiece weight between centers: 9,000 kg - Maximum workpiece weight between centers + 1 steady rest: 12,000 kg - Maximum workpiece weight between faceplates + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 Iodpfx Ajva Ebnsbxoic - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: - Total length: 12,500 mm - Width: 2,130 mm - Height: 1,550 mm - Total weight: 17,700 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool post Additional equipment available at extra cost: - 3-jaw or 4-jaw chuck, various diameters and versions - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 930 mm, premer struženja nad ležiščem sani: 930 mm, premer struženja nad zgornjim sanežem: 650 mm, stružna dolžina: 4.000 mm, skupna dolžina: 6.500 mm, skupna širina: 1.800 mm, skupna višina: 1.800 mm, največja hitrost vretena: 800 obr/min, hitrost vretena (min.): 8 obr/min, skupna masa: 6.400 kg, The universal lathe PORĘBA TPK-90A1/4M has been extensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical acceptance criteria of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered, available for inspection at any time Technical data: - Distance between centers / Turning length: 4000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore diameter: 95 mm Iedpfeykzvysx Abxeic - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 6,500 mm - Width: 1,800 mm - Height: 1,865 mm - Total weight: 6,400 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder (without steady rests) Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 800 mm, premer struženja nad ležiščem sani: 800 mm, premer struženja nad zgornjim sanežem: 530 mm, stružna dolžina: 3.000 mm, The universal lathe PORĘBA TPK-80/3M has been comprehensively rebuilt and modernised by us. It now features technical specifications that correspond to the documentation and operational standards of a new machine, complies with the WOT technical acceptance criteria and Polish standards, and also meets EU regulations. The machine comes with a full 12-month warranty covering spare parts and electrical components. Availability: In stock, under power, and available for inspection at any time. Technical specifications: - Centre distance/turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm Isdpofknw Rofx Abxsic - Spindle bore: 95 mm - Maximum workpiece weight between centres: 6,000 kg - Maximum workpiece weight between centres + 1 steady rest: 7,500 kg - Maximum workpiece weight between centres + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st / 2nd gear) - Overall dimensions: - Length: 5000 mm - Width: 1800 mm - Height: 1800 mm - Overall weight: 6200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool post Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital readout for 2 axes, incl. display, installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 95 mm, premer struženja: 800 mm, premer struženja nad ležiščem sani: 800 mm, premer struženja nad zgornjim sanežem: 530 mm, stružna dolžina: 4.000 mm, teža obdelovanca (maks.): 6.000 kg, The universal lathe PORĘBA TPK-80/4M has been thoroughly rebuilt and modernized by us. It features technical specifications that conform to the documentation of a new machine, meets the technical acceptance requirements of WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, available for viewing at any time Technical data: - Centre distance/turning length: 4000 mm - Turning diameter over bed: 800 mm - Turning diameter over cross slide: 530 mm - Turning diameter in gap: 1080 mm - Spindle bore diameter: 95 mm - Max. workpiece weight between centers: 6,000 kg - Max. workpiece weight between centers + 1 steady rest: 7,500 kg - Max. workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 Iedpfjy N R Iwjx Abxeic - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 6000 mm - Width: 1800 mm - Height: 1800 mm - Total weight: 6200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool post Additional accessories available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change tool post

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 120 mm, premer struženja: 1.350 mm, premer struženja nad ležiščem sani: 1.350 mm, premer struženja nad zgornjim sanežem: 1.000 mm, stružna dolžina: 5.000 mm, skupna dolžina: 7.500 mm, skupna širina: 2.130 mm, skupna višina: 1.550 mm, največja hitrost vrtenja: 630 obr/min, vrtljajska hitrost (min.): 5 obr/min, teža obdelovanca (maks.): 11.000 kg, nosilec vretena: MK 6, The universal lathe PORĘBA TR-135B1/5M has been completely overhauled and fully modernized by us. It features technical specifications in line with the technical and operational documentation of a brand-new machine, meets WOT technical acceptance requirements and Polish standards, and also complies with EU requirements (CE Declaration of Conformity). The machine comes with a full 12-month warranty on spare parts and electrics. Availability: in stock, powered-on, ready for technical inspection. Technical data: - Distance between centers / turning length: 5,000 mm - Swing over bed: 1,350 mm - Swing over cross slide: 1,000 mm - Swing in gap: 1,650 mm - Spindle bore diameter: 120 mm - Motor drive for top slide drawer for taper turning up to 450 mm in length, 90° scale - Maximum workpiece weight between centers: 8,000 kg - Maximum workpiece weight between centers + 1 steady rest: 10,000 kg - Maximum workpiece weight between centers + 2 steady rests: 11,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 – 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 22/41 (1st gear / 2nd gear) - Overall dimensions: Total length: 7,500 mm Width: 2,130 mm Height: 1,550 mm Total weight: 13,200 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder, chip trays Optional equipment available at extra cost: Isdpsva Elasfx Abxoic - 3- or 4-jaw chuck, various diameters and options - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–700 mm, with rollers - Steady rest 450–900 mm, with rollers - MULTIFIX quick-change toolpost