Sredinski stružnica in stružnica za vreteno

UWM 320 x 900 Vario/DRO

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Operating pressure: 12 bar Tank volume: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sand blasting unit Pressure of blast vessel up to 12 bar Test pressure: 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Tungsten carbide blasting nozzle Including 10 m nozzle hose (internal diameter) Fedpfxjvvvrps Afleft

Stanje: rabljeno, številka stroja/vozila: 242350148, A Flott TB23L bench drill is being offered here. The bench drill is mounted on a special lift table (not the original lift table). Technical specifications: - 6-step speed adjustment (manual via pulley) - MK2 taper fitting Fedpfx Afslf Evcsleft

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil Fodpfx Afek Egrpeloft - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Table size: 860x240 mm, 3 T-slots 14 mm, spindle taper SK30, Fodpfx Afjiqkc Islsft Travel distances: X/Y/Z = 450/200/430 mm, spindle speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overarm arbor supports, 1 collet chuck with key, 1 machine vice with crank handle.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Ffedpfxeunt Eys Afljt Space requirement approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition Ffedortd Uwopfx Afljt

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hydraulic Punching Machine Brand: Boschert Ffsdpfern Swksx Aflet Model: Ecco Line EL 500 Digital Specifications: • Punching force: 28 t • Worktable dimensions (width x length): 500 x 1000 mm • Maximum sheet thickness: 6 mm (up to 40 mm punch diameter) • Maximum die diameter: 105 mm (up to 1 mm sheet thickness) • Maximum strokes: 180 strokes/min • Connected load: 5 kW • Voltage: 3 x 400 V / 50 Hz • Total weight: 2 tons • Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm • Tool cabinet, 4 drawers for tools • Foot pedal • All accessories shown in the photos are included.

Leto izdelave: 1990, Stanje: delavnici obnovljeno (rabljeno), Surface grinding machine Brand: Jakobsen Model: 1432 Year: 1990 RPM: 1400 Grinding area: 800x400 mm Table size: 1000x350 mm Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350x50x127 mm Fedpfeiv S Avsx Aflsft Heidenhain ND 221B digital readout. Selter electronic magnetic table 800x350 mm with magnetization regulator. Maximum distance between table and wheel: 650 mm MONNET filter from 2007. Includes sets of grinding wheels (see photographs).

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Ffodpfxjgf H Sas Aflet Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Stanje: rabljeno, Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx.: 385 mm Table clamping surface: 600 x 200 mm Ffedpet Tqrnofx Aflet Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: Ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical feed: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross feed: 1000 mm/min Total power requirement: 6 kVA Machine dimensions (L x W x H): 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, dressing device, wet grinding system with paper band filter