Klin Vrstico Glave nakup rabljenega (1.701)

Stanje: dober (rabljeno), vrsta aktuacije: pnevmatičen, Na voljo je pnevmatske škarje za izsek pločevine. Deluje brezhibno, rezila bi bilo treba malo nabrusiti. Vse ostale podrobnosti so vidne na slikah. Izdelek si je mogoče in priporočljivo pred nakupom ogledati v naši hiši. Za to prosimo, da se dogovorite za termin. Pri nakladanju lahko pomagamo, na voljo je primeren viličar. Z veseljem priporočimo tudi špedicijo. Obrnite se na nas. Kot je pri rabljenih strojih običajno, je vsaka garancija izključena. Za varnost pri obratovanju stroja je odgovoren kupec/upravljavec sam. Pogoji pošiljanja: EXW. Vse navedene informacije so po najboljšem vedenju in vesti. Pridržujemo si pravico do napak. Fodpfx Afoxl Hv Tjlopb

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Fsdpfx Afod Nb A Nslspb Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Workpiece diameter: 10–350 mm, max. grinding length: 660 mm, clamping length: 1055 mm, max. module: 25 mm, swivel angle: +/-60°, grinding wheel dimensions: 300–500 x 100 mm. Equipped with Faudi coolant band filter and Elbaron oil mist separator. The machine has been classified as unserviceable and can only be used as a basis for a complete overhaul. Fedpfx Asrgah Hoflspb

Stanje: rabljeno, TECHNICAL DATA - Pulling force: 80 kN - Maximum broaching stroke: 1250 mm - Maximum feed travel: 500 mm - Spindle lengths: 650 - 1400 mm - Table width: 400 mm - Broaching speed: 1 - 10 m/min - Return stroke speed: 1 - 15 m/min - Installed power: 25 kW - Machine weight: 4300 kg Fpjdpju E U R Tofx Afljb

Stanje: dober (rabljeno), Ring cutting machine, cutting device, cutting pliers, cutting machine, for rings, discs, segments, and strips, ring cutting machine - Manufacturer: Klinger, ring cutting machine - Cutting range: 80 - 1250 mm - Cutting thickness: up to 9 mm - Overall dimensions: 1100/170/H280 mm - Weight: 6.4 kg Fpsdpjvunugefx Afljb

Leto izdelave: 1962, Stanje: dober (rabljeno), številka stroja/vozila: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Mounting diameter for draw heads: 3 x Ø ___ mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Fpjdpfx Aet Dwb Djflsb Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Electrical connection / Power supply: 380 Volt, 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tool clamping system is designed for spring-actuated locking in both the drawbridge and the feeder. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production. For optimum operation, a foundation (pit) or optionally a platform is recommended. Draw heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1975, Stanje: pripravljen za uporabo (rabljen), A gear cutting tool grinding machine for sharpening tools is available. Maximum outer diameter with helical/straight flutes: 300mm/300mm, minimum cutter diameter: 60mm, maximum flute grinding depth: 50mm, maximum helix angle: 45°, number of flutes: 3-45, maximum grinding slide travel: 475mm, grinding wheel diameter min./max.: 150mm/250mm, grinding spindle feed rate: 16m/min, spindle speed: 2700rpm, workpiece holder: ISO40. Documentation available. Inspection on site is possible. Fpsdpfx Afjwn H T Tjlob

Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: Fpjdpjcc D Ddjfx Afleb The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Centre distance: 400–800 mm, spindle speed: 1000–2700 rpm, workpiece diameter: 10–300 mm, grinding wheel diameter: 40–300 mm, swiveling range: -45 to 45°, length: 3000 mm, width: 2500 mm, height: 2275 mm, equipped with Hoffmann oil mist separator (new filter inserts), Faudi gravity band filter system, hydraulic unit, additional grinding head for worm wheel grinding, grinding arbors with diameters 50, 40, 27, 22 mm, holders for SK40 and MK5, driver sets for various clamping diameters, operating manual, circuit diagrams in paper form, inspection is possible. Fsdpfx Afergahxjlepb

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Fedpfx Afsinim Tjlepb Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / Technical Data: Chain Broaching Machine for Continuous External Broaching Tensile force: 25,000 kg Cutting speed: 7.2 / 8.1 / 9.6 m/min Maximum tool length: 3520 mm Pass-through width: 520 mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12,300 x 6,400 x 4,650 mm Power supply: 380V 50Hz / 110kW Accessories / Special Equipment: - 6 tool holders for tool change - Machine documentation Remarks / General Information: The machines are in good condition. The machines are disassembled and stored at our warehouse. The total system volume encompasses several trucks (approx. 70 tons per machine). The machines were used for the production of connecting rods for passenger car diesel engines. Chain broaching machines are designed for use in mass production. The continuous (non-reversing) operating process of chain broaching is engineered for maximum productivity in external broaching operations. The chain broaching process is the only broaching process without any reversal stroke of tools or workpieces. In chain broaching, the workpiece is continuously passed along the tool, thereby performing the feed movement. This unique broaching method is applied only in very high-volume serial production.

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), A complete bottle cleaning system is available, comprising a Klinger bottle washing machine, a Hager + Elsässer drinking water treatment system, and an RO reverse osmosis unit. 1) Klinger Euro Class-D 20/1/73 bottle washing machine, year of manufacture: 2000, capacity: 9,600 bottles/h, cycle time: 7.5s, throughput time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2,020, water consumption: 3.8m³/h, tank volume for soft lye/rinse lye: 5,600l/740l. Dimensions (L/W/H): approx. 8,000mm/3,400mm/2,800mm, weight: approx. 16,000kg, control: Siemens S7. 2) Hager + Elsässer drinking water treatment system consisting of cation and anion exchangers, capacity: 5m³/h. Includes brine tank, pre-filter, and UV sensor. Fpodpfx Afjtwqzleleb 3) RO reverse osmosis system, demineralization capacity: 2.5m³/h. Documentation available. On-site inspection possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1966, skupna masa: 7.000 kg, vhodna napetost: 380 V, dolžina bročanja: 1.500 mm, število bročirnih položajev: 3, premer obdelovanca (maks.): 575 mm, skupna višina: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700kg Machine No.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching positions Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching positions: 3 Distance between broaching positions: 2 x 145mm Clamping diameter for broach pullers: 3 x Ø 85mm Clear width between columns: max. 580 mm Cutting speed: hydraulically continuously variable from 1 m/min up to max. 7 m/min Return speed: hydraulically continuously variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. height 5,100 mm with tool loader raised) Power supply / Connected load: 380 Volt 50 Hz / 14 kW Accessories / Special Features: Fjdpjwql Rvofx Aflepb The machine is equipped with a workpiece table featuring 3 bores for 3 broaching positions. The tool clamping system is designed for mechanical spring-locking in the pull bridge and loader. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimum utilization, installation in a pit (foundation) is ideally required, or alternatively, on a platform. Broach pullers and knock-out devices available on request. The machine can be inspected under power at our facility. General Information: We constantly have a large selection of around 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg in both horizontal and vertical configurations in stock. A significant number of the broaching machines in stock are available for demonstration. If required, we can also offer you used equipment such as broach pullers, knock-out devices, broaching tools, and other specific accessories. We are a contract broaching operation by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries you may have.

Leto izdelave: 1990, Stanje: pripravljen za uporabo (rabljen), Max. workpiece diameter: 10–350 mm, max. grinding length/width: 690/60 mm, clamping length: 950–1330 mm, swivel angle: -60 to 60°, length: 6200 mm, width: 4000 mm, height: 2500 mm, weight: 9 t, equipped with oil filtration system, oil mist extraction, and additional accessories. Fodpjiph T Hjfx Aflepb

Leto izdelave: 1965, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Fedpfxstuuvze Afljpb Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Fpedpeiw Dlkefx Aflsb Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Fpsdpjlpadyefx Aflsb Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1964, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2041, Vertical internal broaching machine with index plate by Karl Klink Model: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 Weight: 3.2 t Broaching force: 8,000 kg Equipped with index plate (2 stations) Power supply: 380V / 50Hz Rated current: 25 A Fpsdpogyd S Djfx Aflob Connected load: 5.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1960, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1732, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI6DT Machine no.: 1732 Year of manufacture: 1960 Weight: 3.2 t Fsdpfx Asgyd Svsflopb Broaching force: 6,000 kg With indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 15 A Connected load: 4 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1961, Stanje: rabljeno, General / Technical Data: Vertical duplex external broaching machine with two tables Manufacturer: Karl Klink Model: RSA 10 T/Zw. Year of manufacture: 1961 Weight: approx. 6,500 kg Tensile force: 10 t Broaching speeds: 1 - 11 m/min Return speeds: 7 - 25 m/min Maximum stroke: per machine unit 1,250 mm Clamping surface: 500 x 500 mm Passage width: 380 mm Power supply: 380 Volt / 50 Hz Note: Fpodpfx Aslwu Hroflsb The machine is connected to power in our warehouse and can be inspected.

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Fsdpfoixntwjx Afljpb Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Leto izdelave: 1964, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2016, used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 380 mm Mounting diameter of pull heads: 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Fpodpfxst Dv I Ao Afljb Machine footprint (W x D x H): approx. 2,200 x 1,550 x 4,200 mm (without pit) Power supply / connected load: 380V, 50 Hz Accessories / special equipment: The machine is equipped with a workpiece table with 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge and hydraulic-mechanical locking in the loader. The machine was electrically (Siemens S7 PLC) and mechanically modernized in 2004. The machine is equipped with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimal operation, a foundation (pit) or optionally a platform is recommended. Pull heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine no.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition, with heavy-duty manual tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Max. workpiece diameter: approx. 750 mm (limited by the tool feeder tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 7 m/min Return speed: hydraulically stepless adjustable from 5 m/min to 30 m/min Required installation space (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Features: • Mechanical-hydraulic control for broach & return stroke • Integrated coolant/lubricant system • Manually operated tool feeder • Broaching slide with puller head mount, guided on both sides with flat guides • Adjustable tensile force limiter Accessories: • 1 universal puller head for flat shanks, 3 mm to max. 25 mm wide • Adapter sleeve for drawbridge from Ø 85 mm to Ø 63 mm Remarks: Fpedper A Hdgjfx Afleb The machine is suitable for keyway production with flat broaching tools as well as for profile broaching. Due to the machine bed and the robust tool feeder, the machine is well-suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is held in stock and can be inspected under power. The machine has not been refurbished, neither technically nor visually, but is ready for immediate use. Profile broaching heads are largely available used upon request, depending on DIN standard, dimensions, and stock availability. Direct contact details and further information can be found in the attached PDF document.

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Fjdpfx Ajgyd T Eeflopb Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Leto izdelave: 1960, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380V / 50Hz Fedpfxegyd S Se Aflepb Rated current: 35 A Connected load: 7.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1999, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg Fsdpjr A Hcbofx Aflepb General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.