Ima Advantage 400 nakup rabljenega (128)

Stanje: zelo dobro (rabljeno), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles. No. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Rotary changer – magazine with 18 tool slots Maximum working area (X – Y – Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X – Y – Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X – Y – Z): 4250 x 2200 x 60 mm Chip conveyor Separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – power: 14.5 kW (S6) / 7.5 kW (S1) No. 3 grippers for clamping and moving the panels onto the machine’s vacuum cups No. 5 air tables for staging panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt Panel discharge system with motorized conveyors Gsdpfx Adevxhnuokeka

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking section Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load: 80 kW Gjdpfx Ajwbp Nwsdkeka

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Godpsfi Tg Hefx Adkska Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Gksdpfx Adjyttrxjkja Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: Gsdpeun N Dlofx Adkska A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Gkedpfeu Ekbnsx Adksa Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Gksdpfxeunrwns Adkoa Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Safety and sound insulation cabins FORMATTING (per side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING (per side): Gluing unit (hot melt adhesive + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (number of slots): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Milling unit 08.055 (2 x 0.66 kW) 0°–30° Profile scraper unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving, rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°–180°

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: 20787, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, IMA BIMA 410 V 140/600 – professional CNC machining centre for wood. Gantry-type construction, designed for the production of furniture, staircases, and special components. Large Z-axis stroke (600 mm) enables machining of tall workpieces. Equipped with a 7.5–11 kW spindle, automatic tool changer, vertical and horizontal drilling heads, and a vacuum table with consoles. IMA WOP control system. Manufacturer: IMA (Germany) Model: BIMA 410 V 140/600 Type: CNC machining centre for wood (point-to-point) Gjdpoyky Hdofx Adkeka 🧩 Working area • X-axis: up to approx. 6000 mm • Y-axis: approx. 1400 mm • Z-axis: version 140 / 600 mm (high Z clearance) • Number of axes: 3–5 (depending on configuration and head) ⚙️ Main spindle • Power: 7.5 – 11 kW • Speed: 1,500 – 24,000 rpm • Tool holder: HSK F63 • Max. tool diameter: approx. 100–150 mm • Max. tool length: approx. 150 mm • Max. tool weight: approx. 6 kg 🔧 Tool changer • Automatic tool changer • Number of slots: 18 🪚 Working units (typical) • Vertical drilling heads: up to 21 spindles • Horizontal (cross) drilling heads • Special aggregates (optional): • lock case routing • grooving saw • Blum / Lamello hardware aggregates • angle aggregates 🧲 Worktable • Vacuum pod & rail table (console system) • Approx. 8 workpiece consoles • Vacuum pumps: 2 pcs. (approx. 100–140 m³/h) ⚡ Drives and feeds • Rapid traverse: • X: up to approx. 100 m/min • Y: up to approx. 80 m/min • Z: up to approx. 25 m/min 💻 Control • CNC: IMA WOP / IMAWOP (optionally Siemens / Beckhoff) ⚙️ Installed power • Total connected load: approx. 23 kW 📏 Machine weight • approx. 6500 – 8500 kg (depending on configuration)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 24406, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 900 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working Area (Axis Travels) • X-axis: approx. 3300 mm • Y-axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, nesting of panels 🔹 Tool Magazine • Automatic tool changer (ATC): up to 18 positions Gkjdpsykn Dwjfx Adkea 🔹 Material Clamping System • Vacuum table with beams and suction cups 🔹 Saw Aggregate • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm — 🛠️ Functions and Equipment (Typical) • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chip conveyance (belt conveyor) — 📌 General Information • Manufacturer: IMA Schelling (Germany) • Year of manufacture found in listings: approx. 2010–2016 (often 2014) • Applications: Furniture, MDF boards, HPL, solid wood, nesting

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), I am selling a stacking / destacking unit MEINERT (IMA Group) P620 E/S - 2500 / 1300 system, year of manufacture 2011. Stacking unit with single-side guidance; also suitable for pallets. Vacuum system (with pump) Rotating head Automatic loading Infeed table with motorized roller system Outfeed table at floor level with lifting mechanism (motorized roller system) Front outfeed table with roller system Outfeed roller conveyor station for stacked material Complete safety fencing included! Operating capacity: approx. 16 cycles per minute Panel height: 10 – 50 mm Min. panel dimensions: 250 x 320 mm Gkedsh Hp Dtspfx Adksa Max. panel dimensions: 1300 x 3000 mm Overall footprint: L. 10,200 mm x W. 8,700 mm Total connected load: 45 kW Year of manufacture: 2011 Available immediately. Ready for operation and possible to inspect. Comes with CE certificate and full documentation.

Leto izdelave: 1955, stanje: rabljeno, used Manufacturer: IMA Model: B55 Year of manufacture: 1955 Machine No.: 0/650 Press cylinders: pneumatic, 4 units Table size: 2900 x 1300 mm Working height: 750 mm Max. material thickness: approx. 200 mm Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition Gksdpfx Asvwf Szedkja Without warranty or guarantee

Leto izdelave: 2007, obratovalne ure: 138 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 900K707385, Tablet Press PRESSIMA – as new, in delivery condition Fully functional machine with complete documentation and software. Includes a multi-tip tool set EU-D (5 × 4mm) (original price €12,000, 6 months old) as well as a single-tip tool set (5mm) EU-B. Both punch sets supplied by Ritter. The machine features an interchangeable turret. B or D tooling can be used, each in EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital display on the machine panel • Digital readout of parameters set via handwheels • Note: no automatic control available Gkjdpfxsy Hl Aqj Adkja Technical Data • Speed: 10–75 rpm • Main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Feed shoe: two-wheel, speed adjustable • Drive motor: frequency-controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and pressing area: stainless steel • Pressing area paint-free, easy access, surfaces hard nickel-plated • Central dust extraction via connection port • Central lubrication of punches via manual lubrication pump • Automatic lubrication pump for punches and guideways • Shoe motor integrated in head section Mechanics • Handwheels for tablet thickness, main compression, pre-compression, and fill quantity • Rotary flap between fill tube and feed shoe • Robust pre- and main compression stations • Scrapers on upper and lower punches • Retaining magnets on lower punches • 12 mm feed cam standard • Lower punch is lowered after dosing • Lower guideway and ejection cam easily removable • Machine status display on control panel Measurement and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/evaluation of: o Main compression top o Main compression bottom o Pre-compression top o Ejection force o Scraping force o Punch travel (upper and lower) • Signal amplifiers for main compression, pre-compression, ejection, and scraping force available Equipment / Positions • Upper and lower punch shaft bores with feather keyways 4.8 mm for guided tooling • Compartment feed shoe • Hard-chromed turret plate • Main compression force measurement incl. display at the operator terminal • Accessory kit type 8 MX: o 4 blank dies EU-B o 4 blank dies EU-D o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: omejena funkcionalnost, IMA postforming machine, year 1999 The hotmelt adhesive units for surface and corner bonding are not included. The machine offered is being sold as a used unit. Sale is made excluding any liability for material defects. The machine is sold as inspected, with all warranties excluded. The seller assumes no guarantee for the functionality, performance, or suitability for any specific purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Gedpfx Ajywfifodkeka Dismantling of the machine is to be carried out by the buyer at their own responsibility and cost. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest with the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information regarding the machine (e.g. year of construction, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging output: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Gjdjv Suhbepfx Adkska

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, 30 paquetes/min – Siemens Simatic OP7 Envolvedora retráctil y máquina de enfajado adecuada para cosméticos y productos pequeños envasados. La máquina forma conjuntos y los envuelve con film plástico, seguido de un túnel de retracción para un embalaje ajustado. Equipada con portabobinas de film superior e inferior y sistema manual de empalme de film. El túnel de retractilado cuenta con una sección de enfriamiento en la salida y control de velocidad ajustable. La máquina es apta para diferentes formatos de producto y agrupaciones, y se suministra con documentación. Velocidad máxima: 30 paquetes/min Ancho del transportador de cadena charnela: 80 mm Ancho del transportador del túnel retráctil: 480 mm Panel de control: Siemens Simatic OP7 Sistema de film: Bobinas superior e inferior con empalme manual Túnel retráctil: con sección de enfriamiento en la salida Regulación de velocidad: ajustable Dimensiones del producto (mín / máx) Longitud: 50 – 100 mm Altura: 100 – 300 mm Gsdpjyt Hiqofx Adkeka Ancho: 25 – 60 mm Dimensiones de agrupación (mín / máx) Longitud: 75 – 330 mm Altura: 100 – 300 mm Ancho: 50 – 100 mm Información adicional Sistema de sobrealimentación incluido Portabobinas superior e inferior Documentación disponible

Leto izdelave: 1998, stanje: dober (rabljeno), Schraubverschließer für Kunststoffdeckel, Durchmesser 50 mm x 20 mm Höhe 380 V, 7,5 kW Maschine mit Deckelzuführung/-sortierung und Fehlverschluss-Erkennung. Leistung bis zu 50 Stück/Minute wie besichtigt (as-is) Gedpfx Aoh Np Uqjdkeka oder angepasst an Kundenvorgaben

Stanje: dober (rabljeno), Leto izdelave: 2014, Naprodaj je IMA sistem za dovod materiala. Stroj je na voljo takoj. Gksdpfeqwn E Hox Adkea Letnik: 2014.

Stanje: rabljeno, • Dimensions (mm): 80 x 60 • Rubber plate Gksdpfx Asbxp Easdkoa • Mounting bracket

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Filling and Packaging Line for 50 ml Vials 1. Vial Loading Machine: Rotary Table, SSS Conveyor Technology, Year of Manufacture 2007 Empty or already filled and sealed 50 ml vials are manually placed onto a rotary table. From there, they are singulated onto the conveyor belt and fed into the next stages of the line. 2. Labelling with Print and Camera Inspection Machine: Pago System 520, Year of Manufacture 2007 Printing System: Domino 320i Thermal Transfer Printer Camera System: Cognex (integrated into Pago) The vials are labelled with self-adhesive labels. During labelling, batch numbers, expiry dates, etc. are printed directly onto the label via thermal transfer (Domino). At the same time, a camera-based inspection (Cognex) is performed on the printed data. The inspection results are displayed on an integrated screen. Both the printing and camera systems are fully integrated into the Pago labelling machine. 3. Changing Vial Orientation (Vertical to Horizontal) Machine: FlexLink Conveyor XH, SSS Conveyor Technology, Year of Manufacture 2016 The labelled vials are moved to a horizontal position via a vial orienter to prepare them for insertion into the cartoner. 4. Cartoning with Leaflet Insertion Machine: MK-120, Harro Höfliger, Year of Manufacture 2007 Preformed folding cartons are automatically erected in the cartoner. Simultaneously, a leaflet is folded and provided by a GUK folding machine. One 50 ml vial and one leaflet are automatically inserted into each folding carton. In the configuration shown here, the base of the carton is sealed with hot glue and the top is closed with a tuck-in flap. Optionally, with existing format parts, the machine can be converted to double tuck-in flaps without glue sealing. 5. Serialization and Camera Inspection Machine: Laetus PrintSpect TTS MV-70, Year of Manufacture 2015 After the cartoner, the folding cartons are printed (thermal transfer) with serial numbers and variable data and then fully inspected by a Laetus camera system. This station was retrofitted in 2015. The Harro Höfliger MK-120 also has an integrated Wölke printing system, which is not used here. 6. Tamper-Evident Labelling Machine: Pago System, Year of Manufacture 2007 The serialized folding cartons are sealed on the tuck-in flap sides with tamper-evident labels. To do this, the cartons are precisely aligned and guided via side belts. 7. Case Packing Machine: IMA CP18BA Case Packer, Year of Manufacture 2007 The finished individual cartons are pneumatically pushed into shipping cases. The case packer seals the shipping cases with hot glue. 8. Final Labelling of Shipping Cases Machine: Laetus VL4 C2 ICMV Cabinet + Pago Labeller, Year of Manufacture 2015 The finished shipping cases are labelled via thermal transfer printing. No camera-based inspection is performed at this station. This unit is used exclusively for labelling shipping cases (no serialization or aggregation). 9. Inspection (optional) Gkodpexb Uptefx Adkja A manual checkweigher is also available but is not included in the sale and was only used for internal final inspections. Line available from Jan. 2026. Further information to follow.

Stanje: rabljeno, Milling and chamfering units Manufacturer: IMA Gkodpfobxp Nuex Adkja - For double-sided edge banding machine (1 unit for the left side / 1 unit for the right side)

Stanje: rabljeno, Na voljo sta 2 kosa. Več informacij najdete na priloženih fotografijah. Gsdpfxsd Tmabo Adkjka

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Edge banding machine Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Edge material: veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Speed: 18,000 rpm End trimming unit Milling units Profile scraping knives Buffing unit Flat scraping knives Gedjv T R Eropfx Adkoka

Stanje: rabljeno, Leto izdelave: 2011, - Trenutna oblika: velikost kapsule 0 - 48 postaj - Največja kapaciteta: 200.000 kapsul na uro - Samodejni nadzor teže - Leto: 2001, popolna prenova v letih 2011/12 - Nadomestni deli na voljo - Vsa dokumentacija in farmacevtske kvalifikacijske datoteke na voljo Gksdpfx Adjx Rz Hyekoa

Stanje: rabljeno, Leto izdelave: 2003, Proizvajalec: IMA Kilian Model: E150 plus Različica: 26-EU-B Leto: 2003 Število postaj: 26 Vrsta orodja: B Vrsta udarnih orodij: EU-B / IPT-B Konfiguracija udarnih orodij: Gksdpfex R A Ulox Adksa - Premer orodja: 30,16 mm - Višina orodja: 22,22 mm - Maksimalni premer tablete: 16 mm - Največja polnitev: 15 mm - Največja glavna kompresija: 80 kN - Največja prekompresija: 23 kN - Hitrost proizvodnje: 7.800 – 160.000 tablet/h Tehnična dokumentacija na voljo Teža: 1.500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 80.859 h, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.630 mm, TEHNIČNI PODATKI X-pomik brez lepljenja: 6.000 mm X-pomik z lepljenjem: 5.000 mm Y-pomik: 1300 mm Y-pomik z glavno vreteno + premer orodja 20 mm: 1630 mm Gksdjx Af Ivspfx Adkja Y-pomik z lepljenjem: 1450 mm Pripravljalna miza: Dyna Poin BIMA 410 V Zasedenost: 4 mesta Enota za obrobljanje robov: prisotna Delovne ure: 80.859 h