HSK AGREGAT 1 IMA IZHOD

IMA

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, hitrost pomika os X: 30 m/min, model krmilnika: ICOS OPEN, The machine has the following configuration: Kedpfjyzy Iwox Al Nodk Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Magazine for roll material Hot melt glue tank Edge pressure roller unit Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Stanje: rabljeno, številka stroja/vozila: 007716, Working area X-axis: 3250 mm Working area Y-axis: 1220 mm Kedpfx Aowuz N Nol Njdk Working table: With vacuum pod supports Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 18 Number of tool positions: 16

Stanje: rabljeno, številka stroja/vozila: 005637, Vrsta pritrjene obrobe: tanka obroba, debela obroba Sistem lepljenja: EVA Stroj za lepljenje obrob: Stroj 1 Maks. širina plošče: 1300 mm Maks. podajalna hitrost: 50 m/min Delovni agregati, desna stran: 11 kos Kedevw Ev Hepfx Al Nedk Delovni agregati, leva stran: 12 kos

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Kdedowukzhjpfx Al Nek Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Kdedpfxoxy Tmno Al Njk Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: rabljeno, številka stroja/vozila: 005635, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 2: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 4: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 5: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Kdjdpfxowuudys Al Nek Pozicija 6: Razkladalec IMA + MEINERT-COMBIMA/II/650/A/R3

Stanje: rabljeno, številka stroja/vozila: 005642, Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Kdodpfxowuciwj Al Njk

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza Lokacija zaloge: Stranka Kedpfxsxgfbqj Al Nodk

Stanje: rabljeno, številka stroja/vozila: 005639, Tip pritrjene obrobe: tanka obroba, močna obroba Lepilni sistem: EVA Večnamenski agregat: da Stroj za lepljenje obrob: Stroj 1 in 2 Maks. širina panela: 3000 mm Maks. podajalna hitrost: 50 m/min Delovni agregati, desna stran: 12 kos Delovni agregati, leva stran: 12 kos Kdjdpfx Aovw Evgol Nok

Stanje: rabljeno, številka stroja/vozila: 007857, Pozicija 1: Horizontalno skladišče IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 2: Krožna žaga za plošče z avtomatskim skladiščem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 3: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 4: Nakladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 5: Razkladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 6: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Ksdpewuuf Djfx Al Nodk Pozicija 7: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 8: Stroji za rezanje kartona IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 9: Stroji za povezovanje IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER) Kdsdpfxsgwbbqj Al Nsk

Stanje: rabljeno, številka stroja/vozila: 008269, Pozicija 1: Nakladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 2: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 3: Dvostranski robni lepilni stroj IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 4: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 5: Razkladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Ksdpfx Aex A Hggel Nodk

Stanje: rabljeno, številka stroja/vozila: 007504, Pozicija 1: Vertikalni skladiščni sistem IMA + SCHELLING-AH 6 Kodpowuuciefx Al Nedk Pozicija 2: Kotna krožna žaga za plošče IMA + SCHELLING-AH 6 Pozicija 3: Nakladalnik IMA + SCHELLING-AH 6

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Kdedpfx Ajx D H Hcol Nsk Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, številka stroja/vozila: 007514, Pozicija 1: Transfer IMA-COMBIMA SYSTEM I Pozicija 2: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 3: Transfer IMA-COMBIMA SYSTEM I Pozicija 4: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 5: Transfer IMA-COMBIMA SYSTEM I Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 7: Transfer IMA-COMBIMA SYSTEM I Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 9: Transfer IMA-COMBIMA SYSTEM I Ksdowukznopfx Al Nsdk