CNC obdelovalni center

HOMAG BOF 211

Stanje: rabljeno, Leto izdelave: 2008, višina obdelovanca (maks.): 40 mm, model krmilnika: PowerControl P85, delovna širina: 1.550 mm, delovna dolžina: 4.175 mm, TEHNIČNE PODROBNOSTI Delovni obseg osi X: 4.175 mm Delovni obseg osi Y: 1.550 mm Maksimalna debelina obdelovanca: 40 mm Število delovnih območij: 2 Hitrost premikanja osi X: 80 m/min Hitrost premikanja osi Y: 80 m/min Hitrost premikanja osi Z: 30 m/min Miza: konzolna miza z vakuumske priseske Število nosilcev z vakuumske priseske: 8 Pozicioniranje: krmljeno s CNC Svedrna enota Položaj: zgoraj Vertikalne svedrne vretenca: 20 Horizontalna svedrna vretenca v smeri X: 10 Rezalna enota Položaj: zgoraj Krmljene osi: 4 + Flex5 Moč motorja: 15 kW Hlajenje: hlajenje s tekočino Menjalnik orodij: samodejen Žagalna enota Položaj: zgoraj Revija za orodja: 2 mesti Revija za orodja 1: 18 mest Položaj revije za orodja 1: zadnja stran stroja Revija za orodja 2: 10 mest Položaj revije za orodja 2: na obdelovalni glavi PODROBNOSTI O STROJU Nadzor: PowerControl P85 Programska oprema za programiranje stroja: WoodWOP 5.0 OPREMA Konzolna miza z vakuumske priseske 8 nosilcev z vakuumske priseske Vakuumska črpalka Samodejni menjalnik orodij Dsdpfoz Ekfvsx Apwsku Hlajenje s tekočino Nadzor PowerControl P85 Programska oprema za programiranje stroja WoodWOP 5.0 Opomba: orodja niso vključena. Stroj se prodaja in dobavlja v njegovem dejanskem in pravnem stanju („kot je in kjer je“), na podlagi fotografske dokumentacije in tehničnih/komercialnih dokumentov z opisnim značajem. Kupec ima pravico pregledati blago pred prevzemom in prevzema odgovornost za namestitev, zavarovanje in uporabo stroja na ciljnem mestu. Zunanja referenca: 7350

Stanje: novo, Leto izdelave: 2024, Système automatique de mesure de longueur et de positionnement pour toutes les scies à tronçonner STROMAB ainsi que pour toutes les machines similaires d’autres fabricants. Il sert à la fois de butée et au positionnement des pièces. Composé de: Profilé en aluminium 105 x 90 mm, anodisé Entraînement par courroie crantée 32 mm, renforcée avec fil d’acier Moteur pas à pas 6 Nm, multi-tension 115-230 V – 50/60 Hz Précision de répétition +/- 0,1 mm Vitesse de positionnement 60 m/min. Commande Type SMART 7 avec écran tactile 7 pouces Mode d’usinage absolu et incrémental 8 valeurs standards préréglées 2 versions logicielles avec différents niveaux d’optimisation optionnellement disponibles. ZM 415 – Longueur de travail utile 4.500 mm ZA333 – Table à rouleaux 4.500 x 280 mm, diamètre rouleaux 32 mm ZA341 – Support frontal 4.500 x 260 mm Dkodpfx Apexraucjwju ZA373 – Câble de verrouillage pour scie à tronçonner existante

Stanje: rabljeno, številka stroja/vozila: 005521, Working area X-axis: 4000 mm Working area Y-axis: 1400 mm Working table: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Dedpfx Apevctlgjwsku Number of tool positions: 24

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, - 5-osna vretenčna pogonska enota DRIVE 5C Profi, 12 kW - Delovna površina: 4000 x 1300 mm (X, Y) - Menjalnik verig: 30-mestni - Svedri: 12 x vertikalnih, 2 + 4 horizontalnih - Projekcijski laser SL LASER Pro Director 6 - Miza z rasterjem/magnetna miza Dedpfxszz N Uqj Apwjku

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) Dksdpfx Asvvi Rfepweu The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Dksdpfjyttcwex Apweu Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Dkedpjyttf Ssfx Apwsu Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Cutting area: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring saw unit EPS.X – Electronic positioning system for X-axis stop Dsdsyx H Dtopfx Apwsku 12" touchscreen display Saw Frame • Machine manufactured with high-precision parts to 1/100 mm tolerance • Massive, self-supporting, rigidly welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch multiplex with integrated small parts shelf • Auxiliary stop profile with dedicated measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of center support • Automatic roller locking during saw cut Saw Beam • Sturdy, durable steel construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced convenience thanks to largely automated operation • Laser-assisted horizontal cut display • Automatic carriage clamping • Automatic plunge and tilt of saw motor • Pneumatic clutch for easy manual mode changeover • SUPERSILENT soundproofing to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized operator guidance • Multilingual operator interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic sawing operation • Infinitely variable feed rates 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • 24VDC UPS for touch PC (Uninterruptible power supply) • Automatic saw beam positioning ASP Dimension Setting • DMS.x digital measurement system (horizontal axis for vertical cuts) • EPS.y electronic positioning system incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winning (including Swiss Design Prize) • Functional and ergonomic design Installation • Wall-mounted or free-standing installation possible

Stanje: novo, Naprava za pritrditev steklenih letvic "2 P Jumbo automatic E.C." - nova - Vaše prednosti: - Kotni spoje je mogoče zapreti - Ni odprtih razpok na steklenih letvicah - Med lakiranjem ni barvnih razlik - Okvire steklenih letvic je enostavno razporediti Stroj za kotne spoje s sponkami 2P Jumbo Automatic E.C. za pritrditev okvirjev steklenih letvic s sponkami. Možnost izbire med avtomatskim in ročnim načinom delovanja; Z nastavljivim kotom, pritrdilno napravo od zgoraj in spredaj Pritisk je mogoče ločeno nastaviti. Možnost uporabe vzporednih in prekritih sponk s pomočjo elektronske programirljive krmilne enote. Napravo za sponke je mogoče namestiti na primerno delovno mizo, upravljanje s pomočjo nožnega pedala. ----- Cena za to izvedbo na zahtevo! Dodatno se zaračunava zakonski davek na dodano vrednost ter embalaža/stroški pošiljanja. ----- Slike prikazujejo stroj za kotne spoje s sponkami 2P z možnostjo nastavljive delovne mize (glejte podrobnosti v razdelku "Dodatna cena"). Dodatne cene: ----- Nastavljiva delovna miza višinsko nastavljiva od 700 do 1000 mm, 2 podstavka, ki ju je mogoče vstaviti Dkodpfx Apevnh T Newju dolžina 1000 mm, 2 podstavka, ki ju je mogoče vrteti in premikati dolžina 1000 mm, podstavki oblazinjeni s filcem, 4 kolesa, od tega 2 s zavoro. ----- Dodatna cena: 1.311,00 EUR neto Sponke: paketi 15 mm sponke (paket s 2000 kosi): cena 22,00 EUR 12 mm sponke (paket s 3000 kosi): cena 32,00 EUR 10 mm sponke (paket s 3000 kosi): cena 32,00 EUR Dimenzije in teže ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Delovna miza 32 kg Vse cene so neto. Dodaten davek na dodano vrednost se obračunava posebej. Dobava iz tovarne, dodatno se zaračunavajo embalaža in stroški pošiljanja. (tehnični podatki po podatkih proizvajalca – brez jamstva!)

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Dkedpog Tu Rksfx Apwou Equipment for short workpieces