Homag Kal 310 nakup rabljenega (488)

Stanje: rabljeno, številka stroja/vozila: 005385, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, laser Jointing cutters: yes Multi-function unit: yes Cpedpfsg Iy Duox Afxeu Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 units

Stanje: rabljeno, številka stroja/vozila: 006253, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, PUR Jointing cutters: yes Multi-function unit: yes Cpedsl Txxgepfx Afxju Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Stanje: rabljeno, številka stroja/vozila: 006252, Type of applied edge: thin edge, thick edge, solid wood Cedpfswcyckjx Afxspu Glue application system: EVA, PUR Jointing cutters: yes Multi-function unit: yes Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Working units: 10 pcs

Stanje: rabljeno, številka stroja/vozila: 006375, Tip nameščenega roba: tanek rob, močan rob Lepilni sistem: PUR Cpedpfx Afop Apx Tjxju Spojno rezkanje: da Večnamenski agregat: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 9 kos

Stanje: rabljeno, številka stroja/vozila: 006042, Tip nameščene obloge: tanka obloga, močna obloga Leplilni sistem: EVA Csdpfx Aswacqlefxjpu Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Maks. hitrost podajanja: 25 m/min Maksimalna debelina plošče: 40 mm Delovni agregati: 9 kos

Stanje: rabljeno, številka stroja/vozila: 008105, Tip nameščenega roba: tanek rob, debel rob, masivni les Cpedpew Idgpefx Afxsu Leplilni sistem: EVA Fugiranje s frezo: da Multifunkcijska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 18 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos

Stanje: rabljeno, številka stroja/vozila: 008107, Pozicija 1: Enostranski robni lepilni stroj HOMAG + LIGMATECH-KAR 310/9/A20/S2 Pozicija 2: Povrat plošč HOMAG + LIGMATECH-KAR 310/9/A20/S2 Csdpfx Ajw U Rqzofxepu

Stanje: rabljeno, številka stroja/vozila: 007575, Type of applied edge: thin edge, thick edge Adhesive system: EVA Joint milling: yes Multifunctional unit: yes Codsybawwopfx Afxjpu Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 pcs

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunction unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Csdpjwd Itmefx Afxspu Working units: 7 pcs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Ta HOMAG KAL 330/6/A3/S2 je bila izdelana leta 2009. Rabljeni robni lepilni stroj z lepilnim agregatom za EVA talilno lepilo, tlačno cono, rezalnim agregatom, kopirno rezkalno glavo, strgalo in polirnim agregatom. Vključuje sistem za vračanje obdelovancev LIGMATECH. Izkoristite priložnost za nakup tega robnega lepilnega stroja HOMAG KAL 330/6/A3/S2. Za več informacij nas kontaktirajte. Csdpjychdujfx Afxjpu

Stanje: rabljeno, številka stroja/vozila: 008395, Delovno območje os X: 3050 mm Delovno območje os Y: 1250 mm Moč glavnega vretena: 10 kW Število krmiljenih osi: 3 osi Cpjdsygtcqjpfx Afxeu Število vrtalnih vreten: 27 Število orodnih mest: 8

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.200 mm, dolžina pomika po osi Y: 1.600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Pripravljen za 1 glavno vreteno s lepilno skupino, nameščeno desno na portalni prečnik. Glavno 5-osno vreteno, 12 kW Vrtalna glava s 31 vreteni: 21 vertikalnih in 10 horizontalnih Vrtalni list za utore, nagib 90° Pihalna šoba za borbo 60 mm Cpodpfxex Irzco Afxou Krožni magacinski sistem za 32 orodij, HSKF63 Linearni magacinski sistem za 8 pozicij Krožni magacinski sistem za 10 pozicij Lepilna skupina Power Edge Pro Duo Varnostni nadzor z odbijačem Odrezovalni trak za ostružke Vakuumska črpalka Upravljalna programska oprema PowerTouch, WoodWop

Stanje: zelo dobro (rabljeno), LONGITUDINAL - TRANSVERSE ROTARY TRANSFER Equipment for placement between two double-end tenoners (or two double-sided edge banding machines) in a line (straight position) or in front of an independent double-end tenoner (or edge banding machine). Intended for rotating workpieces by 90°, ideal for transitioning from longitudinal to crosswise processing. Comes with integrated control cabinet and operator panel. Cpjded Siydopfx Afxju Total length: 6200 mm 1st Roller Table (longitudinal) with motorized rollers: approx. 1300 x 3200 mm Motorized rotary transfer, with double cone (1 top + 1 bottom) 2nd Roller Table (transverse) with motorized rollers: approx. 2500 x 3000 mm Max. panel dimensions: 195 x 250 mm Max. panel dimensions: 1200 x 2500 mm Min/Max panel thickness: 12 - 40 mm Total connected load: 3 kW

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm The line consists of the following machines: Cpjdjdg Itmjpfx Afxsu U06051) Motorized roller conveyor (infeed table) "HOMAG" model TBL 100/25/12/S U06052) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 525/8/A3/15 U06053) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model Profi TDL 310/25/12 U06054) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 526/9/A3/25

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials Cedpfxscr U Urj Afxjpu SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), Double-Sided Edge Banding Machine - Edge Thickness (coil) (min/max) mm: 0.3 - 3 - Workpiece Thickness (panel) min./max. mm: 12 - 40 - Working Width (min./max.) mm: 250 - 2500 - PC Control: PC22 - Top Pressure System with Driven Rubber Belts - Adjustable Fence Linear Feed Rate m/min: 10 - 32 - Liquid Glue Unit - Jointing Milling Unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt Hot Melt Adhesive Unit A3 - Pressure Zone C (manual adjustment) "A" - Coil Holders for 2 Rolls Cjdpfxewk Hp Ts Afxjpu - End Trimming Unit: HL 84 (2x 0.22 kW at 12000 rpm) - Premilling Unit (2x 0.4 kW at 12000 rpm) - Finishing Unit (Flat Scraper Unit + Buffing Unit): FA11 - Polishing Unit

Stanje: rabljeno, številka stroja/vozila: 006374, Tip pritrjenega robu: tanek rob, debel rob Lepilni sistem: PUR Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Csdpfxol Txv Eo Afxopu Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kosov

Stanje: rabljeno, številka stroja/vozila: 006574, Tip nanesenega roba: tanek rob, debel rob, masiven les, furnir Lepilni sistem: EVA Predfreza za spajanje: da Multifunkcijski agregat: da Največja pomična hitrost: 25 m/min Največja debelina plošče: 60 mm Delovni agregati: 7 kos Codpjvxxuxsfx Afxjpu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 Codsx Tqgbjpfx Afxepu - HOMAG FA 11 finishing unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, - Debelina obdelovanca do 60 mm - Debelina robnega traku do 3 mm - Pomik: 16 - 20 m/min - Skupna dolžina: 9365 mm - Powercontrol PC23 Agregati: Codpfxsw R T Als Afxopu - Agregat za nanašanje ločilnega sredstva zgoraj/spodaj - Spojni rezkar 2x 3kW - Lepljenje z 2 koluta zaloge - Kapalni agregat HL 81 0,8kW - Predrezilni agregat FF30 spodaj/zgoraj; 4x 0,4kW - Prostor za 2 dodatna agregata - Profilna strgala PN 10 - Površinsko strgalo - Agregat za nanašanje čistila - Gladilni agregat

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Cpodpjvqbh Eofx Afxju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Allgemeine Daten Abmessungen Tiefe: 7845 mm Maschinengewicht: 5000 kg Zusätzliche Ausstattung HOMAG Leim- und Finish-Komponenten Diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine wurde 2010 hergestellt. Sie bietet eine maximale Anleimerdicke von 20 mm, eine Kantenanleimhöhe bis zu 60 mm sowie eine maximale Vorschubgeschwindigkeit von 25 m/min. Ausgestattet mit Granulat-Leimsystem, Vorheizzone und verschiedenen Bearbeitungseinheiten, darunter eine Fügefräseinheit und eine Eckenrundungseinheit. Nutzen Sie die Gelegenheit, diese HOMAG KAL 210 AMBITION 2264 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Csdpfxjx D H R Ue Afxjpu Anwendungsbereiche Kantenanleimen

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Enostranski robni lepilni stroj Tip nalepljenega roba: tanek rob, debel rob Lepljivi sistem: PUR Codpfxew Up Hns Afxepu Spojno rezkanje: da Večnamenski agregat: da Zgornji rezkalni agregat: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kos.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 Cpodpfsxg Ix Sjx Afxsu - HOMAG FA 11 finishing unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Feedrate 16–20 m/min Length: 9365 mm Cedpfx Afev Ak Swoxjpu Workpiece thickness: 8–60 mm Edge material (coil): 0.3–3 mm Automatic infeed fence adjustment Sliding carriage Separating agent spraying unit Pre-milling unit Workpiece pre-heating PU package including PU60/65 gluepot and Robatech PU pre-melter 6-fold coil magazine Snipping unit HL81 for chamfer/straight cuts Pre-trimming unit BF10 Profile trimming unit FK11 Grooving unit SF21 for grooving and rebating (top/bottom/lateral) Profile scraper PN10 Glue joint scraper Cleaning agent spraying unit Buffers PowerControl PC23 control system Homag Quality Kit EcoPlus energy-saving package Manual operation for run-in mode Pre-installation for Boomerang TFU140 return system Sub-assembly for small parts Foil and high-gloss package CE marking