Homag Bmg nakup rabljenega (485)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003616 - Koda proizvajalca: 2-083-02-7120 - Stanje: Kot novo (razstavni artikel) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - Teža: 2,5KG - Dimenzije: 36X26X21 - Če vas zanima, nudimo servisni pregled, kontaktirajte nas. Iodpfx Asyz T Ttsbxsth

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Podvozje za robne lepilke Itodjw S Dmdjpfx Abxoh Bil je nameščen na Homag Edgeteq S-200, KDF 1130 FC (1100 kg). Zagotovo pa ustreza tudi drugim strojem, npr. Brandt (morda bodo potrebne manjše prilagoditve) Dolžina U-profilov pribl. 1130 mm Vgradna višina z valji pribl. 150 mm 4 robustna kovinska vrtljiva kolesa z mazalko 2 zavore 2 podložni plošči za uravnavo višine Stroj je možno po dogovoru prikazati na naši lokaciji. Ponujamo samo stroje, ki so pripravljeni za prikaz v naši skladišču; glejte še "druge ponudbe tega ponudnika".

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0213 - Koda proizvajalca: 1-056-09-3351 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - Teža: 8 kg - Dimenzije: 46x39x27 cm - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Isdsyztt Hjpfx Abxeth

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0213 - Koda proizvajalca: 2-056-10-0220 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Kompatibilni stroji: - Teža: 6 kg - Dimenzije: 36x26x21 cm - Če ste zainteresirani, nudimo storitev pregleda, kontaktirajte nas. Isdpsyztr Aofx Abxjth

Stanje: zelo dobro (rabljeno), 4-sided sizing and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 325/M1/C Feed speed (adjustable): 15–40 m/min with PC 22 SIZING UNIT: Twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: Top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), grooving unit for rabbeting and grooving UF11 (4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) KZ0400c) Rotating station (90° longitudinal-transverse) "HOMAG" model TDL 310 / 25 / 12 (for longitudinal to cross transfer) Ijdpjiztxyefx Abxjth Feed speed (adjustable): 20–60 m/min KZ0400d) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 SIZING UNIT: Pre-milling cutter (1 x 4.5 kW), twin hogger KD10 (2 x 6.6 kW) + gluing unit: A3 with dual roll magazine EDGE BANDING SECTION: End trimming unit HL 84 (2 x 0.22 kW), top and bottom flush trimming units BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile trimming/copying unit FF32 (4 x 0.4 kW), free position, profile scraping unit PN10, finishing unit (flat scraper + buffing unit) MINIMUM EDGE LENGTH: 70 mm (For narrow workpieces: max. thickness 25 mm, max. edge thickness 2 mm, max. cycle rate 20 pcs/min, max. feed speed 20 m/min.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Prodajam vertikalni pretočni CNC rezkalno in vrtalni stroj HOMAG Weeke Drillteq V-200 (prej BHX 055), letnik 2023. Konfiguracija: 1 kos rezkalna enota z avtomatsko menjavo orodja, 4 pozicije HSK63 13 + 4 + 2 kosov vrtalnih vreten 1 kos utorska žaga S povratno funkcijo, ki vrača elemente nazaj k operaterju ali zadaj kot pretočni stroj. Stanje kot novo. S popolno dokumentacijo in CE. Itedpfx Ajy Hfp Robxoh Takoj na voljo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.383 h, HOMAG DRILLTEQ V-200 je kompaktni in visoko učinkoviti navpični CNC obdelovalni center, zasnovan za natančne vrtalne, utorne in rezkalne operacije pri izdelavi pohištva in omar. Zaradi vertikalne obdelave zasede stroj minimalno talno površino, hkrati pa ponuja veliko prilagodljivost in produktivnost. Idealno je primeren tako za serijsko kot tudi za individualno proizvodnjo. Itedpfoym Ny Sjx Abxoh Stroj je v zelo dobrem tehničnem stanju in ga je mogoče preizkusiti pod napetostjo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Specifikacija Dolžina: 4605 mm Debelina obdelovanca: 40 mm Robni material v roli: 0,4 – 3 mm Robni material v traku: 0,4 – 3 mm Hitrost podajanja: 8 m/min Enota za utrjevanje spojev: 40 mm Enota za hitre spremembe lepilnega sistema Magazin za navit material Iodpfezdklcox Abxeth Pnevmatska dvotočkovna nastavitev pritisne cone Enota za končno obrezovanje s pnevmatsko nastavitvijo Pnevmatska nastavitev za fino obrezovanje Enota za obrezovanje kontur Pnevmatska nastavitev enote za profilno strganje Strgalo za lepilni spoj Bufferji LED notranja osvetlitev EasyTouch nadzorni sistem Ročno centralno mazanje Ročna nastavitev zgornjega pritiska Valjčni zgornji pritisk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Specifikacija: Vertikalni vrtalni blok s 13 vreteni Horizontalni vrtalni blok s 4 vreteni v osi X Horizontalni vrtalni blok z 2 vreteni v osi Y Rezalna žaga D=100 mm Preverjanje smiselnosti Itedpfxszdki Uj Abxeh Vreteno za menjavo orodja 10 kW Izmenjevalec orodij s 4 pozicijami Maks. dolžina obdelovanca 200–3050 mm Širina obdelovanca 70–850 mm Debelina obdelovanca 8–56 mm Powertouch zaslon Woodwop za stroj Način varčevanja z energijo

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Iedpfx Aeyywcvobxjth Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled 'FLEXIBLE' MACHINING CENTER Moving table (workpiece), static working head – horizontal table (workpiece). Control system: PowerControl PC86 powerTouch (woodWOP software). Safety enclosure for the working head. No. 2 workpiece clamps for access to the working area. WEEKE pre-positioning unit for quick positioning of workpieces in the machine with clamping jaws. Support table (workpiece support) at infeed; outfeed table (with powered belt). With automatic panel pusher. Min. workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm). Max. workpiece dimensions (X-Y-Z) mm: 3000 x 1000 (optional 1300) x 80 (2 x 40 mm). Simultaneous processing of up to 2 workpieces (on the Z-axis). Separate switch cabinet and operator console. WORKING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW). Itjdpfx Aoyyvttebxjh WORKING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 KW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW). No. 10 independent horizontal drilling spindles (8 in X + 2 in Y). No. 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm. No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW).

Stanje: zelo dobro (rabljeno), ENOSTRANSKA ROBNA LEPILKA (Leva) Debelina roba na kolutu (min/max) mm 0,3 / 3 Debelina roba v letvicah / trakcih (min/max) mm 0,4 / 20 Debelina plošče (min/max) mm 8 / 60 NOV (v 2024) krmilni sistem Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Podajalna hitrost do 25 m/min Uvajalni sistem EZ 14 Razpršilna enota (za tekoči premaz proti sprijemanju) Nastavljivo vodilno letev upravljano s CNC Enota za obrezovanje 2 x Kw 3 Lepilna enota (P.U.R. lepilo + predtalilnik) Cona za pritisk roba (CNC upravljanje) Magazin za robove v kolutih (predal št. 2) Kapa agregat HL 84 (2 x Kw 0,5 približno) Pnevmatsko nihanje in nastavitev Predrezalna enota BF 20 (2 x Kw 1,5 približno) Multifunkcijska enota (radiusno in oblikovno rezkanje) FK 11 (2 x Kw 0,4 približno) Profilni potezni noži Finish enota (ravni potezni noži + polirna enota) FA 11 203019) Št. 1 sistem za vračanje "LIGMATECH" Mod. ZHR 541/L/095 (s portalskim mostom in 360° vrtljivo sesalno glavo) Itedpfxjyyvp Uo Abxeh

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Cam spacing (mm): PROCESSING UNIT (for each side): Sprayer unit (for liquid anti-stick) Pre-milling cutter (profile trimming) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) – free space EDGEBANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Edge magazine for rolls (compartment No. 6) End trim saw HL84 (2 x kW 0.22) 0°-30° Pre-milling unit (2 x kW 0.55) Contour milling unit (for fine trimming) CNC-controlled FK 13 (2 x kW 0.4) turret 8+8 Free space Isdpfx Abjwxwyfoxoth Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rabbetting and profiling UF11 (1 x kW 4)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (also "SOFTFORMING") with automatic conveying equipment. For panel thicknesses up to 100 mm. Comprising the following machines: W05025A) Loading Unit (Portal) "MAHROS" Model Brush W05025B) Double-sided Formatting and Edge Banding Machine "HOMAG" Model KFL 620/23/QE/30 (softforming) FORMATTING SECTION (for each side): Jointing milling unit (2 x 6.6 kW) Free space Left only: 2 x Universal milling units (rotatable) (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Gluing unit (Hot melt adhesive + pre-melter) Edge magazine for rolls (compartment no. 1) Edge pressure zone for both STRAIGHT and SOFTFORMING End-trimming unit WK14 (2 x 0.8 kW) Milling unit (2 x 0.55 kW) Ijdpfxott Dqpe Abxeth Profile milling (copying) unit FF 12 (4 motors) WD70 Profile scraper unit PN20 Finishing unit (flat scraper + smoothing unit) FA11 W05025C) Stacking Unit (Portal) "MAHROS" Model Brush

Stanje: zelo dobro (rabljeno), Double-sided machine (first machine in a production line) Edge thickness in coils (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Itjdpfowxwxbex Abxjh Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min 15 - 40 Safety and noise protection cabin FORMATTING UNIT (per side): Spray unit (for liquid non-stick agent) Chipping unit KD 10 (2 x 6.6 kW) Open station EDGE BANDING SECTION (per side): Gluing unit (PUR glue + pre-melter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) Type A Edge magazine for coils (slot no. 6) Universal milling unit for grooving, rabbeting and profiling SF 20 (HSK63F - 4.5 kW) 0°-90° CNC horizontal Pre-milling unit (2 x 0.55 kW) Milling unit MF 21 (2 x 0.55 kW) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + polishing unit) FA 11

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Itjdpfodg Itnjx Abxoh Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: zelo dobro (rabljeno), LONGITUDINAL - TRANSVERSE ROTARY TRANSFER Equipment for placement between two double-end tenoners (or two double-sided edge banding machines) in a line (straight position) or in front of an independent double-end tenoner (or edge banding machine). Intended for rotating workpieces by 90°, ideal for transitioning from longitudinal to crosswise processing. Ijdpfjd Siydjx Abxoth Comes with integrated control cabinet and operator panel. Total length: 6200 mm 1st Roller Table (longitudinal) with motorized rollers: approx. 1300 x 3200 mm Motorized rotary transfer, with double cone (1 top + 1 bottom) 2nd Roller Table (transverse) with motorized rollers: approx. 2500 x 3000 mm Max. panel dimensions: 195 x 250 mm Max. panel dimensions: 1200 x 2500 mm Min/Max panel thickness: 12 - 40 mm Total connected load: 3 kW

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE, max. working width 2500 mm Iedpjdg Itmjfx Abxsth The line consists of the following machines: U06051) Motorized roller conveyor (infeed table) "HOMAG" model TBL 100/25/12/S U06052) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 525/8/A3/15 U06053) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model Profi TDL 310/25/12 U06054) 1st double-sided sizing and edge banding machine "HOMAG" model Profi KFL 526/9/A3/25

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE “SOFTFORMING” - Min/max edge thickness (roll material) mm: 0.3 - 3 - Min/max edge thickness (strips) mm: 0.4 - 12 - Min/max workpiece thickness mm: 12-60 - Control: Power Control PC 22 - Feed speed (variable) m/min: 12 - 24 - Top pressure with a motorized timing belt Ijdpfofd Ilyex Abxsth - Gluing unit (hot melt adhesives and pre-melter): QE 34 / E12 - Pressure roller track (revolver) for flat and contoured panels (softforming) - Single roll magazine - End cutting unit HL 84 (2 x 0.84 kW – 12,000 rpm) - Fine trimming unit (2 x 1.5 kW – 12,000 rpm) - Milling unit (2 x 0.4 kW – 12,000 rpm) OPTIONAL: Feeding system with longer infeed and 3-wheel motorized rubber top pressure

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control Power Control 22 Feed speed m/min 18 Top pressure driven by V-belt Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled Jointing milling unit 2 x Kw 3 Bonding unit (P.U.R. adhesive + pre-melter) QA 34 + PU 34 Edge pressure zone (CNC controlled) "A" Edge magazine for rolls (compartment No. 12) End trimming unit HL 84 (2 x Kw 0.22) pneumatic (2 pos.) Pre-milling unit Optimat (2 x Kw 0.55) Iodjd Nt Nqopfx Abxoth Multifunction unit (radius milling and profile milling) FK 13 (2 x Kw 0.4) CNC (8+8) Multi-profile scraping unit (CNC controlled) MN 21 Finishing unit (flat scrapers + smoothing unit) FA 11 (pneumatic) OPTION: Return conveyor "LIGMATECH" Mod. ZHR 05 (SOFIT code: Z02007)

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 Iodpjdt Rgvefx Abxoth VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Itedpfedz Uk Tox Abxjh Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: rabljeno, Complete factory for furniture production, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (mm 5700x2700) with stacking system "SIRIO" SZ0M25) Panel saw "GIBEN" Mod. GammaDue (mm 3800x2200) SZ0M26) Panel saw (multi-blade saw) "GABBIANI" (finished panels mm 4250 x 2120) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (film lamination/glue on paper) SZ0M29) Press line "COLOMBO REMO" (mm 1400x9600) for paper/veneer/laminated materials SZ0M30) Press line "FRIZ" (mm 1400x6200) for paper/veneer/laminated materials SZ0M41) Double-sided edge banding and sizing line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided edge banding and sizing line "IMA" Combima Softforming with a second double-sided edge banding and sizing machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with splitter "NARDELLO" Mod. Elegance SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed system and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and winding machine "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cross-cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" Isdpfx Ascr U Urobxsth SZ0M08) Cross-cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Pre-assembly line for honeycomb panels SZ0M18) No. 6 multi-opening press "COLOMBO REMO" (mm??x mm??) SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI+ELMAG+ COSTA LEVIGATRICI" Many other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, racks (wall-mounted shelving), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Itsdpfjd Nvi Djx Abxjh Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: zelo dobro (rabljeno), RETURN SYSTEM for Edgebanding Machine (LEFT) When combined with a single-sided edgebanding machine, this system allows a single operator to continuously feed the machine (the processed workpiece is automatically returned to the operator). Roller conveyor with 180° conveyor belts: 2600 mm x 1800 mm 1st Conveyor line: 7000 mm x 900 mm 2nd Conveyor line: 2500 mm x 850 mm Itedpfx Aegz Atbjbxeh Model: BOOMERANG BONSAI