Homag Bmg 511 nakup rabljenega (488)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, število osi: 4, največja hitrost vretena: 18.000 obr/min, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It is equipped with Homatic CNC control, WOODWOP CNC programming system, an 18-position disc tool changer, and a main spindle with a 12 kW three-phase motor. The machine can process workpieces up to 3,000 mm in length and 1,400 mm in width and is fitted with a full-length table with adjustable vacuum clamps. Ask about the availability of this HOMAG PROFI BAZ20/30/16/V/D CNC woodworking center. Contact us for further details. • Control/Software: Homatic CNC controller; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length: 800–3,000 mm; Width: 350–1,400 mm; Max. thickness: 70 mm with edge / 80 mm milling • Minimum rail width: 120 mm; Max. weight: 150 kg • Table/clamping: • Full-length table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 adjustable manually in Y-direction • 8 vacuum clamps, 125 x 50 x 100 mm • Working height, bottom edge of workpiece: 950 mm • Unit for shifting vacuum clamps on carrier rail with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop pins for laminate overhang: lifting/rotating device, max. 20 mm overlay, stroke length 110 mm, individually selectable, end-position monitored (for manual door loading) • Main spindle: • Speed range: 1,500–18,000 rpm (VFD 15 kW), full rated power from 12,000 rpm • Max. tool diameter: 180 mm (milling) / 200 mm (sanding); dust extraction for all tools/units • Unit interface/C-axis: • Pneumatic and tiltable drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disc tool changer for HSK F63; tool weight 6 kg; max. tool length 200 mm • Configurations: 18 x max. Ø 130 mm; or 9 x max. Ø 180 mm + 9 x max. Ø 70 mm; sanding tools max. Ø 200 mm • Toolchanger raised for traveling pickup (left side) • Units (for tool changer unless stated otherwise): • Drilling/milling unit, 4 spindles: ER25 up to shaft Ø16 mm, max. projection 50 mm, max. speed 13,500 rpm, continuously tiltable via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12,000 rpm, integrated air blast, unlimited tilt over C-axis • Tilting saw/drilling unit: manually 0–90°, flange Ø30 mm, cutting body Ø52 mm, prepared for crosscut saw max. Ø 180 mm, drill chuck with Weldon D=10 mm, max. speed 9,000 rpm, C-axis tiltable • Cutter holder D=30 with chip guide: arbor length 45/80 mm, chip deflector plate controlled via C-axis, changer space Ø 140 mm • Edge trimming unit: simultaneous top/bottom, edge radius max. R12 mm, min. external radius ~R5 mm / internal radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis tilt, max. speed 12,000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow sensing shoes • WPL cutterhead: exit angle 5°, Ø 70 mm • Edgebanding/gluing equipment: • Drive spindle/V for gluing units: mounted on the right side of the gantry; cross-slide with Y return lock and Z-axis lift; return lock with C-axis and electric/electronic interface; own Z-axis Lhedsx D Ribjpfx Adksd • Gluing unit for 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); minimum internal radius R40 at 90°; max. edge height

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.350 h, HOMAG OPTIMAT BHX 200 Odlično stanje. Malo delovnih ur. Dva vrtalna agregata za hkratno vrstično vrtanje. 5 mest za rezkarje. Lhedpfx Ajyr Rakodksd Če vas zanima, nas prosim kontaktirajte. Mizarska delavnica Moldaschl 73037 Göppingen

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 1.200 mm, skupna dolžina: 3.600 mm, skupna širina: 1.480 mm, - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes Lsdjx Ei Syspfx Adkjhd - └ Type of documentation: Technical data, electrical schematics, user manual, operating system - └ Language: NL - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs.]: 8 - └ 1st unit type: - - Tools included: Yes - └ 3rd unit type: - - Tools included: Yes - └ 4th unit type: - - Tools included: Yes - └ 5th unit type: - - Tools included: Yes - └ 6th unit type: - - Tools included: Yes - └ 7th unit type: - - Tools included: Yes - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Transport packages [pcs.]: 4 Financial Information VAT: The indicated price is plus VAT. VAT/margin taxation: VAT deductible for businesses. Delivery and trade-in possible at any time for all items in the industrial sector. Yorick Diebels

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0/200/06/3164, skupna masa: 6.500 kg, skupna dolžina: 12.600 mm, teža obdelovanca (maks.): 5.500 kg, Stroj za mehko oblikovanje robnega traku, v obratovanju, rabljeno stanje, leto izdelave 2003, Lhedsvx Ep Nepfx Adkod

Stanje: rabljeno, številka stroja/vozila: 007985, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA Lsdjx A Th Djpfx Adkjhd Joint milling: yes Multi-function unit: yes Working units: 7 pcs

Stanje: rabljeno, Leto izdelave: 2018, skupna višina: 1.650 mm, skupna dolžina: 4.400 mm, skupna širina: 1.000 mm, Price: On request - Special features: - Description: The machine currently has a fault that needs to be repaired - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs.]: 9 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Glue application unit - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Rough trimming unit - Tools included: Yes - 6th unit type: Radius scraping unit - Tools included: Yes - 7th unit type: Corner rounding unit - Tools included: Yes - 8th unit type: Flat scraping unit - Tools included: Yes - 9th unit type: Brushing unit - Tools included: Yes - Voltage [V]: 400 - Current consumption [A]: 10.3 - Fuse [A]: 16 Ljdpfx Aoyvf Nbsdkehd - Transport dimensions: 4400mm x 1000mm x 1650mm (L x W x H) - Number of transport packages [pcs.]: 1 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment. Yorick Diebels

Stanje: rabljeno, številka stroja/vozila: 007987, Pozicija 1: Enostranski robni lepilni stroj HOMAG-HIGHFLEX 1650 Lhjdjx A Thqopfx Adked Pozicija 2: Povratni transport za plošče HOMAG-HIGHFLEX 1650

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Splošni podatki Globina mer: 7755 mm Ta robni lepilni stroj HOMAG Optimat KAL 310 je bil izdelan leta 2007. Gre za levi model z največjo debelino obdelovanca 60 mm in podajalno hitrostjo do 24 m/min. Opremljen je s PU sistemom za lepljenje robov in enoto PowerControl PC 22, njegova dolžina znaša 7755 mm, primeren pa je za robne trakove do debeline 3 mm. Razmislite o nakupu tega robnega lepilnega stroja HOMAG Optimat KAL 310. Za več informacij nas kontaktirajte. Vrste uporabe Lepilni stroji za robove Ledox D Nqwjpfx Adkjhd

Stanje: rabljeno, Leto izdelave: 2005, Enostranski robni lepilni stroj, namenjen natančnemu in stabilnemu lepljenju masivnih in ploščnih materialov (iverne plošče, MDF, laminat). Stroj je oblikovan kot kompaktna, a popolnoma opremljena rešitev za malo- in srednjeserijsko proizvodnjo s poudarkom na kakovosti obdelave robov. Masivni litoželezni okvir zagotavlja visoko togost stroja in dolgoročno geometrijsko stabilnost. Stroj je opremljen s klasičnim neprekinjenim transporterjem s pritisnim trakom in popolnim naborom obdelovalnih agregatov za končno obdelavo roba v enem prehodu. Tehnična sestava stroja: Predrezkalna enota Ogrevanje materiala Samodejni dozirnik EVA lepila Nanašalni valj EVA Odrezovalne žage (sprednja in zadnja) Groba rezkalna enota Zaokroževalna enota Radijska strgala Strgalo za lepilo Rezkalni agregat za utore Lodpjyfw Syefx Adkjhd Krtačna enota Povratni transporter

Stanje: rabljeno, številka stroja/vozila: 006849, Type of attached edge: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunction unit: yes Lsdpjwd Itmofx Adkjhd Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0002517 - Koda proizvajalca: 4-008-61-0284 - Stanje: Kot novo (razstavni artikel) - Funkcionalnost: Popolnoma delujoče - Združljivost s strojem: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 1KG 20X20X20 Lhodjymfldspfx Adkod

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003529 - Koda proizvajalca: 2-083-01-5513 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoča - Združljiv stroj: - V primeru zanimanja nudimo storitev servisa, kontaktirajte nas. 1KG 20X20X20 Ledpfsymfk Tox Adkshd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003528 - Koda proizvajalca: 2-083-01-5516 - Stanje: Kot novo (razstavni kos) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - V primeru interesa nudimo servisni pregled, kontaktirajte nas. 1KG - 20X20X20 Lhsdpfxeymfivj Adkjd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Koda Ferwood: RS0003525 - Koda proizvajalca: 1-003-65-5353 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljiv stroj: - Po dogovoru nudimo storitev pregleda, kontaktirajte nas. 7KG - 46X39X27 Lsdpfx Aeymfghsdkjhd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ferwood koda: RS0003497 - Koda proizvajalca: 2-083-01-0116 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Združljivost z napravami: - Če vas zanima, nudimo storitev servisa, kontaktirajte nas. Lhjdpfxeymd Uds Adkjd

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Šifra Ferwood: RS0001621 - Koda proizvajalca: 2-083-01-5086 - Stanje: Kot novo (razstavni eksponat) - Funkcionalnost: Popolnoma delujoče - Kompatibilen stroj: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 1KG 20X20X20 Lhjdsymd I Ropfx Adkjd

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: AGG0145 - Koda proizvajalca: 2-056-10-3300 - Stanje: rabljeno - Funkcionalnost: ni preizkušena - V primeru interesa nudimo storitev pregleda, kontaktirajte nas. Ljdpfx Adownrdqekshd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 0-201-22-3325, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 5.800 mm, širina obdelovanca (maks.): 1.200 mm, model krmilnika: Homatic-CNC System PC83 mit Windows NT 4.0, hitrost pomika os X: 80 m/min, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item punctually on 20.03.2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: Saw and crosscutting unit for tool changer Drilling and milling unit (4 spindles) for tool changer Combined flush/radius milling and finishing unit for tool changer Air nozzle for workpiece edge for tool changer Attention: The scope of delivery includes only the units mentioned above. No vacuum suction cups, tools, or tool holders—possibly shown in the pictures—are included! TECHNICAL DETAILS Console clamping table "K": 12 movable consoles for holding vacuum cups with longitudinal and side stops, 4-fold occupancy Max. workpiece length with single set-up: 5,800 mm Max. workpiece length in pendulum mode: 2,200 mm Max. workpiece width: 1,200 mm Max. workpiece thickness (with standard 100mm high suction cups) with edge: 60 mm (when dust extraction hood is in position 1) Max. workpiece thickness (with standard 100mm high suction cups) without edge: 60 mm Ljdpfxsyic Tuj Adkjhd Max. workpiece thickness (with standard 100mm high suction cups) without edge: 120 mm (when dust extraction hood is in position 2) Support equipment Drilling head: 17 vertical spindles 2x main spindle 12 kW water-cooled for HSK (speed 18,000 rpm with C-axis and 12-position disk tool changer) Separate Y-axis for 2nd main spindle plus aggregate interface with integrated pneumatics and electrics Electronic supply and swivel drive C-axis: swivel range without limitation. Edge banding unit, 360°, for changeover into right main spindle Max. edge height: 65 mm Pickup station right for glueing unit storage Pre-cutting station and triple roll magazine Adapter units Combined flush/radius cutting and finishing unit (profile scraper) Saw and crosscutting unit Drill-milling unit, 4-spindle (crosshead) Air nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC Control PC 83 with Windows (NT 4.0) EQUIPMENT WOODWOP programming system version 5.0 Network connection Laser positioning aid Chip conveyor belt Safety: Foot mats at front, side safety guards, rear: installation against wall Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 4000 mm Delovno območje Y: 1600 mm Elektromandrel z osjo C, moč 11 kW, vpenjalo HSK 63F Glave za vertikalno vrtanje: 17 Glava za horizontalno vrtanje v križnem položaju + žaga Skupina za rezkanje in čelno obdelavo Skupina za lepljenje 360° Kombinirana skupina za obrezovanje/strganje Magazin za robni trak z 2 postajama Krožni magazin za 12 pozicij Krmiljenje: Power Control PC 85 WoodWop 7.1 (nadgradnja izvedena leta 2018, cena cca 9.500 €) Delovna miza z 8 nosilci in priseski Vakuumska črpalka Elmo Rietschle Varnostne preproge Lhsdeyprr Nepfx Adksd Transportni trak za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Homag Machining Center Genius BAZ20/30/14/D Electronically controlled milling and edge banding machine, post-processing and drilling center for batch-based manufacturing of furniture components, solid wood, or similar materials. Base machine: - Heavy-duty, stable machine bed with a compact linear guide system. - Unit carrier with linear guide system, ball screw, and digital AC servo motor for positioning the Z-axis, travel path 340 mm. - Automatic central lubrication for all drives and linear guides. - Designed for the attachment of various table configurations. Control: Wood Wop 5.0 - Enlarged Z-axis stroke: 500 mm - Extension of the anti-slip mat - Pass-through table B20/30+40/…/D manual - Motorized width adjustment for longitudinal console D-table - Chip conveyor for B../30+40/K - Stop pins for edge overhang - Main spindle: 12 kW - 70-position chain tool changer for B20 for HSK 63 F tools - Aggregate interface for main spindle - Electrical/electronic interface: 220/24 volts - Gluing unit on 4 sides for main spindle - Melting unit with granulate container - External edge changer, automatic, 3-position - Rack exchange system for aggregates and tools - Rabbet pressing zone for main spindle - Flush-trimming unit for tool changer - Saw and cross-cutting unit for tool changer - Drilling-milling unit, 4 spindles for tool changer - Lock case milling unit for disc changer - Vertical milling unit with scan ring - Sanding unit with air blow nozzle - CNC programming system Wood-Wop - Postprocessor for BAZ Lodpfxsx Nrk Hj Adkshd - Free-standing operator panel Location: Ex works, customer site - Immediately available - System must be dismantled by the buyer at short notice

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, številka stroja/vozila: 0-240-75-0703, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, NOWA CENA TYLKO 85.000 EURO!!! Cena ważna tylko do 20 kwietnia 2026 roku! Skorzystaj z okazji! Wiadomość z ostatniej chwili: maszyna zarezerwowana do 15 kwietnia 2026 roku. Jeśli jesteś zainteresowany zakupem, zostaw wiadomość – wpiszemy Cię na listę rezerwową. Zapraszamy do zakupu NOWEJ i wyjątkowej piły panelowej HOMAG SAW-TEC B-400 Pro Line, w wersji rozszerzonej do współpracy z automatycznym magazynem. Oferowana piła jest FABRYCZNIE NOWA. Zakupiona w 2020 roku od HOMAG POLSKA Sp. z o.o., została dostarczona bezpośrednio do naszej siedziby przez producenta. Zespół serwisowy Homag dokonał jedynie uruchomienia próbnego; maszyna nie była użytkowana. W branży ani model, ani marka Homag nie wymagają przedstawienia – Homag to światowy lider w produkcji nowoczesnych, najwyższej klasy maszyn. Nasz model jest wyjątkowo bogato wyposażony i posiada praktycznie wszystkie możliwe opcje. Podstawowa wersja takiej piły kosztuje obecnie od 100.000 do 110.000 EURO netto (425.000–467.500 PLN netto)*, natomiast nasza rozszerzona wersja, kompatybilna z automatycznym magazynem i dodatkowymi opcjami, to koszt ok. 190.000 EURO netto (807.500 PLN netto)*. Zalety - Wysoka wydajność dzięki automatycznemu załadunkowi i dużemu wysuwowi tarczy. - Wysoka efektywność przy stosunkowo niewielkich wymaganiach przestrzennych. - Zaprojektowana do efektywnego przepływu materiału i precyzyjnej logistyki. - Przystosowana do zintegrowanych procesów produkcyjnych. Mamy bezpośredni kontakt i wsparcie producenta HOMAG, który w razie potrzeby może zapewnić instalację i uruchomienie piły u nowego właściciela. Uważamy, że udzielony rabat – ponad 45% względem ceny nowej maszyny – to bardzo atrakcyjna oferta dla każdego, kto szuka nowoczesnej piły z opcją automatycznego magazynu lub myśli o takim rozwiązaniu w przyszłości, co pozwoli oszczędzić ok. 90.000 Euro netto, czyli ok. 400.000 PLN netto*. Oczywiście piła może pracować również samodzielnie, bez podłączenia do magazynu automatycznego. Ledpfoyu Spxjx Adkjhd Uwagi ogólne dotyczące oferty sprzedaży: - Urządzenie jest FABRYCZNIE NOWE, ale wyprodukowane w 2020 roku, dlatego nie udzielamy gwarancji. - Brak możliwości zwrotu urządzenia. - Cena w ogłoszeniu nie zawiera VAT (23% dla polskich nabywców) – zostanie doliczony na fakturze. Prosimy o zweryfikowanie formy prezentacji ceny w naszej ofercie. - Jeden właściciel. * 1 EUR = 4,25 PLN. Zapraszamy wszystkich zainteresowanych. Posiadamy wiele nieruchomości w Polsce i jesteśmy deweloperem budującym domy i mieszkania w Warszawie (stolica Polski). Maszyny oferowane w naszych ogłoszeniach są naszą własnością. Pozyskaliśmy je jako rozliczenie od naszych najemców z branży meblarskiej. Znamy ich historię i stan, co potwierdzają nasze opisy. Pozostajemy w kontakcie z producentami maszyn, którzy mogą zapewnić wsparcie techniczne – Homag, Otto Martin, OMC Machinery, FANUM. Ponieważ nie potrzebujemy tych urządzeń, oferujemy je w bardzo atrakcyjnych cenach, szczególnie biorąc pod uwagę ich praktycznie nowy stan. Zapewniamy pomoc w transporcie na terenie Polski lub UE. Zapraszamy do obejrzenia maszyn przed zakupem.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: 0-250-84-4817, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 400 mm, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.250 mm, proizvajalec krmilnikov: HOMATIC, skupna višina: 2.800 mm, dolžina mize: 4.300 mm, širina mize: 2.250 mm, model krmilnika: PC86 PowerControl, moč vretenovega motorja: 12.000 W, Oprema: dokumentacija / priročnik, HOMAG CENTATEQ N-800, BHP 210/43/22/R 4-axis CNC machining center Year of manufacture: 2019 Operating hours: 7,840 h main operation / 2,420 h secondary operation Part counter: 28,661 Lhodpfox Rcdaox Adkjd (as of 13.01.2026) Maximum workpiece dimensions: • X-axis: 4,300 mm • Y-axis: 2,250 mm • Z1-axis: 410 mm, Z2-axis: 185 mm SPECIFICATIONS / CONFIGURATION MATRIX-PRO machining table, size 4,300 x 2,250 mm - 4 pneumatically lowerable stops with electronic position detection - 3 vacuum pumps, capacity per unit 290/345 m3/h at 50/60 Hz, total 870/1,035 m3/h - 2 independently controlled vacuum zones, each 2,150 x 2,250 mm - 3 safety/anti-slip mats, safety enclosure with door - Main spindle 11 kW, 24,000 rpm - Liquid cooled - Spindle with C-axis interface - Tool holder/clamping: HSK F63 - SENSO-FLEX probing system, z-direction controllable - Vertical drilling unit with 21 spindles, drive power 2.3 kW - 2 x 14-position tool changers (carousel), one each at front and rear 1 ROLLER TABLE for panel handling, 7,080 x 2,200 mm Control / Software: - PowerControl PC86 powerTouch - WoodWop 7.1 Machine dimensions: 11.60 x 4.50 x 2.80 m The machine can still be viewed in operation. Available from September 2026 (approx. calendar week 37)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, centre d’usinage CNC d’occasion Fabricant : Homag Modèle : Drillteq V-200 (Optimat BHX 055) Année de construction : 2021 Zone de travail X : 200 – 3050 mm Zone de travail Y : 70 – 850 mm Zone de travail Z : 12 – 60 mm, épaisseur spéciale de la pièce : 8 mm Broches de perçage verticales : 13 pcs Broches de perçage horizontales en X : 4 pcs Broches de perçage horizontales en Y : 2 pcs Scie à rainurer dans l’axe X Broche de fraisage : 10 kW ; 1 250 – 24 000 tr/min Changeur d’outils 4 positions (ATC) Système de serrage de la pièce avec pince Longueur de la pièce : 3050 mm Lhjdoymzkvopfx Adksd Largeur de la pièce : 70 – 850 mm Épaisseur de la pièce : 8 – 56 mm ; poids max. 35 kg Commande POWERCONTROL PC86 power touch avec écran tactile FullHD 24″, système d’exploitation Windows 10 Connexion réseau, Tapio ready préconfiguré WoodWop 7.0 incl. MDE et logiciel de gestion de production Système de lecture de codes-barres BASIC Livraison strictement limitée à tous les outils et porte-outils HSK illustrés !

Stanje: rabljeno, številka stroja/vozila: 008403, Maks. višina obdelave: 160 mm Maks. obdelovalna širina: 250 mm Maks. hitrost pomika: 24 m/min Število delovnih vreten: 5 Lhjdpsykivhofx Adkjd

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Lodpfxswx Aaqs Adkshd Location: 63934 Röllbach