Extrusion nakup rabljenega (324)

Leto izdelave: 2013, obratovalne ure: 1.000 h, stanje: pripravljen za uporabo (rabljen), This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Designed for pipe extrusion, this unit represents a robust addition to any production line. Contact us for further information. Additional Equipment Hfodex D Ewmepfx Adrjh • 2x electric melt pressure transducers, 1/2" UNF diaphragm pressure sensors • 2x bottom temperature probes with blade sensors Machine Advantages Qualitative Machine Advantages • 13x anchor points for mounting tools • Twin-screw pair, compact design, made from highly tempered steel and bimetallic construction • Counter-rotating twin-screw extruder, gearbox with integrated backpressure bearing for up to 350 bar • Oil circulation lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 D with atmospheric and vacuum venting ports • Heating and air cooling divided into 5 zones, total power output of 56,400 W • Vacuum unit for BT 115 with 2x vacuum units and vacuum suction devices • Complete screw temperature control including cassette assembly • Mains connection with main switch and load disconnect switch for heating, drives, and auxiliary supplies Technical Machine Advantages • Fixed installation for an extrusion height of 1000 mm • Complete control cabinet equipped with all necessary control and regulation devices • Microprocessor-controlled multichannel controller for two and three-point zones • Adaptive and self-optimising control performance • Fault notifications with grouped alarm and data storage • Siemens MP377 touch panel for setpoint input and actual value display • Recipe management for up to 20 recipes • Drive with an AC motor, vector-controlled • Digital drive controller for AC motors with full digital technology • Motor temperature monitoring with pre-warning and shutdown Additional Information Machine still connected to power.

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Ta SWISS CAB KMV je bila izdelana leta 2001. Gre za cevni ekstruder, zasnovan za plastično-kovinske kompozitne cevne sisteme. Ostale tehnične podrobnosti bodo na voljo kmalu. Razmislite o možnosti nakupa tega cevnega ekstruderja SWISS CAB KMV. Za več informacij nas kontaktirajte. • Plastično-kovinski kompozitni cevni sistem Hfsdpjx I S N Hjfx Adroh • Premer cevi: 14, 16, 18, 20 mm • Material: LDPE-MDPE-HDPE, s silanom povezljiv PE • Difuzijska zapora iz aluminija, debelina 0,15 – 0,4 mm • Največja hitrost linije: 40 m/min • Višina osi: 1000 mm

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Barberan machine from 2007. This Barberan PUR-33-L is a continuous profile wrapping line designed for the application of PVC foil, CPL, paper, and veneer to various substrates using hotmelt technology. It features a robust, one-piece, electro-welded steel frame, motorized rubber-coated feed rollers, and a slot-die extrusion system for precise adhesive application. If you are looking for high-quality wrapping capabilities, you should consider the Barberan PUR-33-L, which we have available for sale. Contact us for further details. • Base Frame: One-piece, electro-welded steel frame with high structural rigidity. Designed to absorb vibrations and maintain the alignment of the pressure rollers. • Transport System: Motorized, rubber-coated transport rollers with inverter-controlled speed to ensure precise synchronization between adhesive application and profile feed. • Press/Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot-die extrusion system with adjustable lips. • Working Width: 330 mm. • Adhesive Application Accuracy: Constant grams-per-square-meter distribution, independent of line speed. The closed system reduces oxidation, prevents premature PUR cross-linking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of adhesive film thickness. • Type: 20 kg PUR drum melter with heated plate, melting only the uppermost layer to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with special seals to prevent ingress of air/moisture. Hodpoym U Diofx Adrsfh • Pump: Integrated gear pump for consistent, pulsation-free adhesive delivery to the applicator head. • Function: Maintains working temperature of the adhesive during transfer from the melting unit to the slot-die head between approx. 120-150°C. • Length: 4.5 meters. • Technical Features: Internal PTFE (Teflon) core, resistant to high pressure and PUR. Includes uniform electric heating element to avoid cold spots, high-efficiency thermal insulation, integrated thermocouple, and temperature control via the machine’s PLC.

Leto izdelave: 1998, stanje: rabljeno, Proizvajalec: Clextral Hodpsyzt Ukofx Adrefh Model: BC 45 Leto: 1998 Tip: Dvopolžni ekstruder Prejšnja uporaba: Predelava hrane – kuhanje in ekstruzija AC motor: 25 kW Dolžina polža/cilindra: 1800 mm Elementi polža: nazivni premer 55 mm. L/D: 33 Obrobna oprema ni vključena, je pa na voljo na zahtevo: granulator, dozirna enota, vodna črpalka in nova elektro omara. (Njihova integracija je lahko predmet študije izvedljivosti in dodatne ponudbe.)

Leto izdelave: 1990, stanje: rabljeno, Proizvajalec: Clextral Model: BC 45 Leto: 1990 Tip: Dvojnijni ekstruder Prejšnja uporaba: Termična ekstruzija v živilski industriji DC motor: 21 kW Dolžina vijaka/cevi: 1500 mm Elementi vijaka: nazivni premer 55 mm. L/D: 27 Hodpfxsyzt Uds Adrsfh Vključeno v paketu: Granulator, vodna črpalka in upravljalna plošča Dodatna periferna oprema ni vključena, je pa na voljo na zahtevo: Dozirna enota. (Njena integracija je lahko predmet izvedbene študije in dodatne ponudbe.)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 600 kg, vpenjalna sila: 80 kN, skupna širina: 2.800 mm, skupna dolžina: 4.000 mm, skupna višina: 2.260 mm, Główne cechy: 1. System sterowania komputerowego (PLC) – japoński PLC Mitsubishi 2. Szafa elektryczna – wszystkie podzespoły elektryczne pochodzą od światowych marek, gwarantujących jakość i niezawodność 3. Ekran dotykowy – komputerowy system sterowania INOVANCE 4. Zaawansowany siłownik hydrauliczny z Niemiec 5. Prowadnica liniowa 6. Falownik ABB (Szwajcaria) oraz Rexroth (Niemcy) 7. Dużej średnicy rury stalowe ocynkowane 8. Platforma podnoszona elektrycznie 9. Grzałka ceramiczna 10. System hydrauliczny i połączenia zaworowe – Yuken Industry Specyfikacja techniczna: • Materiał: PE, PP i inne • Maksymalna objętość: 6 l • Wydajność produkcji: 170–260 szt/h • Wymiary: 4,0 × 2,26 × 2,8 m • Waga: 6 T System plastyfikacji: • Reduktor: utwardzane koła zębate, wysoka wytrzymałość, niska emisja hałasu • Ślimak: Ø 70 mm, L/D 24, stal 38CrMoALA, dostępny system chłodzenia • Wydajność plastyfikacji: 100 kg/h (HDPE) • Strefy grzewcze: 3–4 grzałki aluminiowe, grzanie automatyczne • Moc grzewcza: 12 kW/h • Silnik wytłaczarki: silnik asynchroniczny trójfazowy (380 V, 50 Hz) • Wentylator chłodzący: 4 strefy, automatyczne chłodzenie System wytłaczania: • Materiał: wysokogatunkowa stal stopowa, podawanie centralne • Ilość głowic: 1 • Maks. średnica głowicy: Ø 160 mm • Strefy grzewcze: 4, grzanie ze stali nierdzewnej • Moc grzewcza: 5–7 kW System zamykania: • Cechy: wysoka wytrzymałość, sztywność, centralne ryglowanie, stabilne otwieranie i zamykanie formy • Siła zamykania: 80 kN • Zakres regulacji odległości płyt: 170–520 mm • Maks. wymiar formy: 380 × 420 mm System elektryczny: • Automatyczny monitoring, alarmy usterek, licznik automatyczny, funkcje pomocnicze • Interfejs sterowania: ekran dotykowy z systemem autodiagnozy • Kontrola temperatury: automatyczny moduł kontroli temperatury • Kontrola ruchu: Inovance (wersja chińsko-angielska) System hydrauliczny: • Cechy: wielofunkcyjny zintegrowany blok hydrauliczny, sterowanie proporcjonalne, wysoka wydajność • Silnik pompy olejowej: trójfazowy asynchroniczny (380V/220V, 50/60 Hz) • Pompa olejowa: importowana pompa podwójna • Zawory: importowane zawory i połączenia pompy oleju • Przewody olejowe: dwuwarstwowe, odporne na ścieranie • Ciśnienie systemowe: 60 kg/cm² • Układ chłodzenia: oddzielny obieg wody, chłodnica oleju System pneumatyczny: • Marka: system pneumatyczny AIRTAC (Tajwan) • Ciśnienie robocze powietrza: 0,6 MPa • Wydajność powietrza: 0,8 m³/min • Zawór elektromagnetyczny: AIRTAC (Tajwan) Główne podzespoły Elementy elektryczne: • System sterowania PLC: MITSUBISHI (Japonia) • Ekran dotykowy: INOVANCE • Sterownik temperatury: HUICHUAN • Przekaźnik pomocniczy: OMRON • Styki: Schneider (Francja) • Silnik elektryczny: trójfazowy 380V • Zasilacz: TAIWAN MEANWELL • Przetwornica: ABB (Szwajcaria) Elementy hydrauliczne: • Pompa olejowa: TAIWAN HIGH-TECH • Zawór: YUKEN • Pompa i połączenia: YUKEN • Uszczelnienia: HALLITE System pneumatyki: • Siłownik: AIRTAC • Zawór powietrza: AIRTAC Maszyna do rozdmuchu wtryskowego została zakupiona bezpośrednio z fabryki w Chinach na potrzeby projektu, który nie został zrealizowany. Maszyna była użytkowana tylko przez jeden miesiąc. Lokalizacja: Siemianowice Śląskie, Polska Dostępne są również urządzenia peryferyjne na sprzedaż: Hfedpfxsv Iflps Adreh • System chłodzenia powietrzem 5 HP • Podajnik automatyczny • Mieszalnik do barwnika 150 kg • Rozdrabniacz odpadów

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), KUAG ROHRABZUG RA 110 3+3 E 6 caterpillar haul-off unit Year of manufacture: 2003 Caterpillars: 6 Diameter: Min 20 mm, Max. 170 mm Haul-off speed: 0.2 - 10 m/min Condition: Very good, ready for operation The haul-off unit is my property We speak Spanish Nous parlons français We speak English Sachal Extrusion Machinery Hfjdpfx Adop Analereh D-26345 Bockhorn-Grabstede Germany

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1630, skupna masa: 7.800 kg, trajanje garancije: 6 meseci, moč: 85 kW (115,57 KM), Prodaja se kompletna proizvodna linija na osnovi briketirke Di Più BRIK MB100 (complete production line). Generalno obnovljen stroj DI PIU BRIK MB100 (tovarniško obnovljen leta 2025), pripravljen za takojšnje delovanje. Stroj je namenjen visokozmogljivemu briketiranju. Primeren je za zahtevno industrijsko uporabo. Stroj ima za seboj približno 2.000 delovnih ur. Stroj je na novo obnovljen v tovarni Di Piu, zamenjani vsi vitalni deli, vsi kabli, električna napeljava, ter potrebna električna oprema. S čimer je stroj dan v stanje novega in ima 6 mesečno tovarniško garancijo proizvajalca Di Piu. Stroj lahko proizvaja brikete z luknjo ali brez, debeline 90mm do 110mm iz mehkega in trde lesa, okrogle ali kvadratne. Ogled stroja je možen v tovarni v Italiji: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italija Mehanska briketirka Di Piu BRIK MB100 je avtomatski stroj za stiskanje lesa, žagovine in drugih odpadnih materialov v lesne brikete. Idealna vlažnost vhodnega materiala je med 8 % in 12 %, velikost delcev pa med 1 mm in 12 mm. Tehnični podatki: -Kapaciteta proizvodnje: 1.300 – 2.300 kg/h (pri gostoti žagovine 160–200 kg/m³) -Premer briketa: 90 – 110 mm -Moč glavnega motorja: 75 kW -Skupna instalirana moč: 98 kW -Tlak stiskanja bata: 2.000 – 2.500 kg/cm² -Vertikalni polž z reduktorjem: 5,5 kW -Oljna črpalka: 1,5 kW -Oljna črpalka za zapiranje iztiskalne glave: 1,5 kW -Dozator s polžem in nastavljivo hitrostjo: 1,5 kW -Oljni sistem za mazanje bronastih ležajev: 100 litrov -Senzor za nadzor izhoda briketov (samodejni izklop ob izpraznitvi materiala) -Zaščitne obloge gibljivih delov -Senzor tlaka olja -Krmilna omarica -Zalogovnik za vhodni material (akumulator) -Senzor nivoja za nadzor napajalnega sistema -Teža stroja: cca 7.800 kg Stroj je opremljen z vsemi pripadajočimi dodatki za popolno delovanje in integracijo v linijo za briketiranje: DODATNA OPREMA – MB100: Hfedpfx Aswrp Emjdreh - Dozirni silo: Izdelan iz masivne jeklene konstrukcije. Premer: 1500 mm, višina: 1000 mm. Vgrajen ima rotacijski rezalnik z reduktorjem 2,2 kW, nameščen na robustno jekleno ogrodje. Dovajanje materiala nadzira senzor nivoja. - Linija za hlajenje briketov po iztiskanju, skupne dolžine 20 metrov - Avtomatska žaga za razrez briketov - Žaga samodejno reže brikete na dolžine, ki jih predhodno nastavi operater. - Naprava za proizvodnjo briketov z luknjo - Sistem za hlajenje glave stroja z ledeno vodo - Sistem proizvaja 50 litrov/minuto ledene vode za učinkovito hlajenje glave briketirke. - Zračno hlajen hladilnik vode z hermetičnimi spiralnimi kompresorji, mikroprocesorskim krmiljenjem in velikim rezervoarjem za shranjevanje energije, v katerem je potopljen izmenjevalnik toplote voda–hladilno sredstvo. - Izmenjevalnik toplote je visokoučinkovit tipa “fin-pack”, izdelan iz bakrenih cevi in aluminijastih lamel. - Rezervoar za vodo prostornine 800 litrov - Črpalka za dovod vode (50 l/min – 20 m.c.a. – 0,55 kW) s trikrožnimi ventiloma DN25 za uravnavanje temperature hladilne vode v glavi briketirke. - Digitalni elektronski regulator temperature povezan s senzorjem NTC (merilni element d.6 × 52 mm, IP68, AISI 316). DODATNO: NOVAPAC pakirka Možnost dodatnega nakupa pakirke NOVAPAC, ki je popolnoma kompatibilna s strojem Di Più BRIK MB100 in drugimi stroji, idealna rešitev za avtomatsko pakiranje neposredno po stiskanju. Letnik: 2013 Cena za Novapac: 19.000 € Oprema vidna na zadnjih 6 slikah

Stanje: rabljeno, Leto izdelave: 2021, For sale: 10L Jerrycan Blow Mould + 2-cavity AdBlue Spout Mould For sale: industrial extrusion blow moulds, suitable for the production of plastic containers and accessories. The lot includes: 1) 10L Jerrycan Blow Mould Industrial blow mould for manufacturing 10-litre plastic jerrycans. The mould is complete, in very good mechanical condition, and ready for installation on a blow moulding machine. Hsdox E U R Ujpfx Adrofh Features: - Production of 10L jerrycans - Process: extrusion blow moulding - Made of hardened steel - Cavity includes integrated handle - Hydraulic/pneumatic closing and guiding systems - Precisely machined surfaces - Previously used in industrial production - Stored on pallet, ready for transport 2) AdBlue Spout Mould – 2 cavities The lot also includes a 2-cavity mould for producing AdBlue spouts/nozzles. Features: - 2-cavity mould for AdBlue spouts - Suitable for extrusion blow moulding - Robust steel construction - Complete tool, ready for production - Ideal for manufacturing jerrycan accessories These moulds are ideal for manufacturers of plastic packaging, industrial jerrycans, chemical containers, or products related to AdBlue.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: nepreverjeno, številka stroja/vozila: YF-240, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, V letu 2022 smo kupili novo proizvodno linijo, vendar se je poslovna usmeritev spremenila, zato linija ni bila nikoli razpakirana iz kontejnerjev. Linija je shranjena v treh kontejnerjih 40HQ in enem kontejnerju 20GP. Proizvodna zmogljivost: 220–300 kg/uro Hfodpfxjxb R Aie Adroh WPC proizvodna linija je namenjena proizvodnji izdelkov iz lesno-plastičnega kompozita, kot so WPC podi, WPC podboji za vrata, zaključne letve ipd. Z menjavo polžnega valja in orodij je možno proizvajati tako PE/PP kot PVC tip WPC izdelkov. Značilnosti WPC proizvodne linije: - uporablja dvostopenjski proizvodni postopek: najprej zmešavanje in granulacija, nato ekstruzija - vgrajen bimetalni polžni valj, visoka trdota in dolga obraba - uporablja paralelni dvopolžni ekstruder za zmešavanje in peletiranje, kar omogoča dobro odzračevanje in boljši plastični učinek Vse tehnične specifikacije so na voljo v prilogah.

Leto izdelave: 1999, stanje: rabljeno, Proizvajalec: Clextral Model: EVOLUM+ 53 Leto izdelave: 1999 Tip: Dvojvijačni ekstruder Prejšnja uporaba: Kuhanje-iztiskanje v agroživilski industriji AC motor: 130 kW Dolžina vijaka: 2120 mm Elementi vijaka: nazivni premer 53 mm. L/D: 40 Cilindri: 10 enot Hfodpfoyy S Iysx Adrsh Obrobna oprema ni vključena, je pa na voljo na zahtevo: granulirnik, dozirna enota, vodna črpalka in nova elektro omara. (Integracija je lahko predmet izvedljivostne študije in dodatne ponudbe.) Širok spekter uporabe: hrana za ribe, hrana za hišne živali, prigrizki, mesni nadomestki…

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Three cable processing machines from a complete extrusion line are available for sale: 1) Spool Pay-off Ka-Be-Ma AS400 - Spool flange diameter range: 140 mm – 400 mm - Minimum core diameter: 90 mm - Maximum spool width: 300 mm - Maximum spool weight: 50 kg - Conductor diameter range: 0.1 mm – 1 mm - Maximum pay-off speed: 600 m/min - Tension force: 0.5 N – 20 N - Machine dimensions (L x W x H): approx. 1200 mm x 1550 mm x 1450 mm - Weight: approx. 1000 kg 2) Cooling Section Ka-Be-Ma T-KW-UKW-A-1.5 - Zone 1: Process: immersion cooling, temperature range: 70°C – 80°C, length: 2000 mm - Zone 2: Process: spray cooling/deflection section, temperature: approx. 25°C Hsdpeyxq Upjfx Adrsfh 3) Double Take-up Ka-Be-Ma DWST400-1 - Spool flange diameter range: 305 mm – 400 mm - Minimum core diameter: 156 mm - Maximum spool width: 282 mm - Conductor diameter range: 0.1 mm – 1 mm - Speed: 600 m/min - Tension force range: 0.5 N – 1.5 N - Maximum spool weight: 80 kg - Machine dimensions (L x W x H): approx. 1200 mm x 1550 mm x 1450 mm - Weight: approx. 2200 kg Documentation available. An on-site inspection is possible.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 172 mm, največja hitrost vrtenja: 49 obr/min, Over the past few years, more than €420,000 has been invested in new components and factory overhauls! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm Hodpeyztagsfx Adrofh MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing housing: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Twin-screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory overhauled in 2021, unused Main gearbox P.I.V, year 1986, factory overhauled in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory overhauled in 2020, unused Main motors Siemens, 212 kW, year 1986, factory overhauled in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust disks Note: The electrical and control systems as well as the screw segments are not included in the scope of supply.

Stanje: novo, Naloga stroja: ekspanzija in napihovanje koruze, riža, prosa, sireka. Končni izdelek se lahko pred ekstruzijo aromatizira, začini ali zmeša z drugimi mokami. Možno je aromatizirati z naslednjimi začimbami: paprika, sol, poper, česen v prahu, gobe, naravne beljakovine. Kapaciteta: 12–20 kg/h predelane surovine. Hodsxvxd Rspfx Adrjfh Pogon motorja: 4 kW, 0,18 kW. Lijak: največ 5 kg materiala. Opremljeno z izsesovalcem pare.

Leto izdelave: 1998, obratovalne ure: 297 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 200 mm, največja hitrost vrtenja: 3.000 obr/min, premer vijaka: 35 mm, številka stroja/vozila: E0195/10, Pas de prix de réserve – vente garantie au plus offrant ! Extrudeuse monovis avec seulement 297 heures de fonctionnement, y compris scie de tronçonnage et unité de tirage ! Hussmann ES35 x 30D DÉTAILS TECHNIQUES Diamètre de la vis : 35 mm Longueur : 30D DÉTAILS DE LA MACHINE Puissance moteur : 16 kW Heures de fonctionnement : 297 h Scie de tronçonnage DÉTAILS TECHNIQUES Vitesse moteur triphasé : 3 000 tr/min Puissance moteur triphasé : 0,55 kW Diamètre lame : 200 mm Unité de tirage DÉTAILS TECHNIQUES Vitesse de tirage : 20/30/40/50/60 m/min Force de tirage : 11 700 / 7 800 / 5 800 / 4 700 / 3 900 N Longueur de contact : 800 mm Largeur bande max. : 160 mm Hauteur profil max. : 160 mm DÉTAILS DE LA MACHINE Puissance d'entraînement : 2 - 5,6 kW Poids : 800 kg Hfsdpoyrmzqefx Adrsh ÉQUIPEMENT Commande électrique et électronique complète avec pupitre de commande à distance Affichage digital de la vitesse Ampèremètre Potentiomètre hélicoïdal 10 positions

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, DYNAMICZNA MYJKA Model ERFOR® DR8 Urządzenie komponentowe do linii myjących dla recyklingu ♻️ ♻️ ♻️ Dynamiczne myjki to maszyny wykorzystywane do mycia średnio zabrudzonych i rozdrobnionych odpadów z tworzyw sztucznych, takich jak: opakowania PP, PVC, butelki PET, rozdrobnione big bagi i materiały, takie jak LLDPE, LDPE, HDPE, PP, PVC, PS, odpady gospodarstwa domowego po chemikaliach i wiele innych. Myjki oferowane przez Koltex PRS to proste w obsłudze i niezawodne urządzenia, które można skonfigurować w bardziej wydajny system mycia kaskadowego (tandem – 2 x 30 kW, 2 x 55 kW lub 2 x 75 kW). Wielopunktowy system dozowania wody do myjek sitowych (system czyszczenia) oraz aktywne odciąganie zanieczyszczeń zapewniają wyższą efektywność pracy, natomiast dynamiczne podawanie surowca możliwe jest dzięki obrotowym łopatom wirnika. Wydłużony segment sita (1400 mm) znacząco poprawia jakość mycia, a odprowadzenie nadmiaru wody zapewnia zastosowanie sita ze stali kwasoodpornej. Użycie dwóch segmentów sitowych ułatwia również serwisowanie urządzeń. Model – DR8 Moc silnika [kW] – 30 / 55 / 75 kW Wydajność suszenia folii [kg/h] – 1000 / 1500 / 2000 kg/h Wydajność suszenia mielonki [kg/h] – 4500 Hfedpfxouqlmzo Adroh W naszej ofercie znajdziesz także: Kompletne linie do recyklingu tworzyw sztucznych Linie myjące DWFS® Linie do granulacji i ekstruzji Więcej informacji znajdziesz na naszej stronie internetowej.

Stanje: rabljeno, Leto izdelave: 1971, Pressure: 200 t Clear width: N/A mm Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between uprights: 420 mm Total power requirement: 18 kW Machine weight approx.: t Space requirement approx.: m E X N E R Hydraulic four-column press for embossing, coining, backward extrusion, calibrating, and punching (medals) Type: H4SP 200 # 1101-20 Year of manufacture: 1971, but has been overhauled several times since then _____ Press force downward: approx. 200 t Return force upward: approx. 20 t Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns (front): 420 mm Side distance: 220 mm Die height (table to ram, top): 380 mm Ram stroke: approx. 200 mm Piston/column diameter: 270/120 mm Piston bore: 50 mm Closing speed (ram): — Rapid traverse/load traverse/ram down: 330/10/180 mm/sec Total power requirement: approx. 15 kW — 380 V — 50 Hz Weight: approx. 3,000 kg Machine dimensions (L x W x H): approx. 1.4 x 1.3 x 2.75 m Hfsdpfjt Hw Dwsx Adrsh Accessories / Special Equipment - Hydraulic ejector in table with separate pressure regulation - Electric selector switch for continuous stroke/foot release/manual engagement/setup - Large pressure gauge and control lamps to indicate pressure achieved/depth achieved - Press stroke and rapid traverse are set via a switching linkage with limit switches on either side of the press piston - Pressure is controlled via a fine-adjustment pressure valve - Reversal from pressing stroke to return stroke via pressure switch or limit cam - Control cabinet and hydraulic unit, all compactly attached and easily accessible - Previously equipped with automation, but only various pneumatic lines and valves remain

Leto izdelave: 2014, obratovalne ure: 30.000 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20526471, Labor-Laborextruder – Doppelschneckenextruder Coperion ZSK 26 Mc18 (40 L/D) mit einem Schneckendurchmesser von 26 mm Der Extruder verfügt über alle Merkmale der ZSK Mc18 Baureihe und eignet sich sowohl für die Rezepturentwicklung und Musterherstellung als auch für die Produktion kleinerer Compoundmengen bis ca. 180 kg/h. Im Vergleich zum Vorgängermodell ZSK 26 Mc ermöglicht der weiterentwickelte Laborextruder eine Durchsatzsteigerung von bis zu 100 %, da das Drehmoment auf 15 Nm/cm³ erhöht wurde. Der Extruder ist mobil und benötigt nur wenig Platz, da der Schaltschrank in den Grundrahmen integriert ist. Heiz- und Kühlsysteme sind betriebsbereit installiert (Plug & Play). Maschinennr.: 20526471 Baujahr: 2012 Betriebsstunden: ca. 30.000 h Zustand: Gebraucht, in Betrieb Technische Daten: Extrudertyp: Doppelschneckenextruder Modell: ZSK 26 Mc18 Verfahrenslänge: 40 L/D Antriebsleistung: 36,9 kW Stromversorgung: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Zylinderaufbau: E-0-0-S-0-0-1-0-V-0 Ausstoß: ca. 150–200 kg/h, abhängig von Rezeptur, Rohstoff und gewünschter Produktqualität Anwendungsgebiete: Hochgefüllte Compounds, Masterbatch-Anwendungen Geeignet für die Verarbeitung von: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET und Biopolymeren Lieferumfang Gravimetrisches Dosiersystem: K-Tron gravimetrische Dosierer 1 × Granulatdosierer 1 × Pulverdosierer (Doppelschnecken-Ausführung) Seiteneinzug / Entgasung: 1 × Seitenbeschicker ZS-B25 1 × Vakuumentgasung ZS-EG25 Vakuumsystem: Busch Vakuumpumpe Plastex MI 0120 B 222 CNX6, speziell für PET-Anwendungen entwickelt. Bitte beachten: Vakuumpumpe ist nicht enthalten. Hfodpeyhd Dbofx Adrsh Prozessüberwachung: Schmelzedrucksensor-System Schmelzetemperatursensor-System SPS-Integration Granuliersystem (Stranggranulierung): Lufttrockner nicht enthalten Stranggranulator SP50 Wasserbad Peripheriegeräte: Sackentleerstation für Granulate Fördersystem zu den Dosierern Ersatzteile: Ersatzteile enthalten, 2. Schneckensatz.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Enovijačni ekstruder Battenfeld BEX 1-75-30:B s ko-ekstruderjem BEX 1-35-30:B Uporaba za PE, PP Leto izdelave: 2006 Premer polža: 75 mm Pogon Baumüller 205 kW Obr/min: 2.450 Skupni izhod pribl. 850 kg/h Ekstruder je bil leta 2014 pri podjetju Battenfeld predelan na frekvenčni pogon (nov trifazni motor brez ogljikovih ščetk in frekvenčni pretvornik) Menjalnik je bil obnovljen julija 2024 Stanje: ekstruder je v zelo dobrem stanju Zadnja uporaba: PE-cevi Battenfeld ko-ekstruder BEX 1-35-30:D Uporaba: PE-cevi Priključna moč: 69 kVA Izhod: cca 110 kg/h Leto izdelave: 2010 Stanje: ekstruder je v zelo dobrem stanju Ekstruder je v moji lasti Hfjdpfx Aoug Edkodroh Lokacija: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Nemčija

Leto izdelave: 2004, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42 mm Main motor power: 51 kW L/D ratio: 37 Hsdpfjyg Eghsx Adrefh Center distance: 35 mm The extruder consists of a base frame, a gearbox, and a distribution unit with special bearings designed to ensure optimal operation under a backpressure of up to 150 bar. The barrel is a modular cylindrical type with a working length of 37 diameters, divided into eight segments. Each barrel segment is temperature-controlled via forced circulation of demineralized water through horizontally drilled channels in every module. Heating is provided by cartridge heaters. The screws feature interchangeable segments and are mounted on splined shafts, allowing configuration for optimal processing based on requirements. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5 kW liquid ring vacuum pump connected to the designated module through easy-to-clean piping; extracted gases are discharged into a dedicated trap for simple cleaning. The drive includes a Siemens AC motor with 51 kW power, complete with inverter, mounted in a cabinet equipped with the required safety devices and status indicators. The integrated control panel is divided into two sections: Power supply and temperature control. The cabinet is equipped with an air conditioner. The extruder includes a closed-circuit water/water temperature control unit (pump: 1.1 kW). Chiller not included.

Leto izdelave: 2013, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20910-01, Unused Hosokawa Bepex extruder, model BX 150, made of stainless steel (AISI 316) for low-pressure extrusion. This machine is designed for producing products with an open structure, large surface area, and good forming properties. The processed material is fed into the unit through the intake opening. Inside the extrusion chamber, two rotors rotate in opposite directions. - The upper 2-arm rotor, equipped with additional scrapers, mixes and conveys material downwards. This rotor is driven by a 0.55 kW, 60 Hz electric motor with gearbox, providing adjustable speeds in the range of approx. 14 - 139 rpm. - The lower 3-arm rotor is fitted with curved arms and rotor knives. The product is compressed and extruded through a screen by the lower 3-arm rotor. The granule size depends on the perforation diameter of the screen. This rotor is driven by a 3.0 kW, 60 Hz electric motor with gearbox, offering adjustable speeds from about 15 - 144 rpm. Hedpfx Adjt Tvx Tsrofh Included are (2) extrusion screens with a perforation diameter of 2 mm and a screen thickness of 1.2 mm, as well as a control cabinet with integrated control panel. Mounted on a stainless steel frame with (4) castors.

Leto izdelave: 2024, obratovalne ure: 10 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without any issues. The stuffing unit reliably compacts the loose material and feeds it directly to the extruder. This ensures consistent material intake and stable extrusion, even with challenging input materials. Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and voluminous materials such as EPS or film regrind • Efficient material feed thanks to integrated stuffing unit • Compact design, easy to maintain - Feeding extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit - Hopper for material feed (Suitable for low bulk density material) Hfodpstziudsfx Adroh - Large filter / screen changer - Strand die adapted

Stanje: skoraj kot novo (rabljeno), Edelstahl-Trichter 8 kg mit Rührwerk und Edelstahlschnecke, regelbare Geschwindigkeit, verschiedene Extrusionsscheiben für unterschiedliche Pastaformen, mobil Hfodpod R D Tlofx Adreh

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), SICA-TRS 110-800.D ŽAGA ZA CEVI za PVC/PP/PE Uporaba: Rezanje in posnemanje robov PVC, PE, PP cevi Hodpsvulgtofx Adrjfh S sistemom za odsesovanje ostružkov Minimalni premer: 110 mm Maksimalni premer: 800 mm Leto izdelave: 05.1994 Pribor: različne prijemalne čeljusti Lokacija stroja: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 Stroj je v moji lasti.

Stanje: rabljeno, Leto izdelave: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, process definition, job planning, simulation of workpiece machining operations on the 3D model of the machine, and generation of the required machine programs. bSolid - 3-axis machining. bSolid - 5-axis machining module for surface processing with 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: · Assignment to surfaces, 3D roughing and finishing operations · Spreading or projection of a path onto a curved surface · Machining on a plane · Following 2D or 3D curves with any tool type bSolid - 3D engraving bSolid - Import of external formats Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Hjdpfx Aow D E A Esdrofh Z = 245 mm with modules H=29 mm Workpiece support in Y: * 1650 mm with thickness up to 60 mm on modules with a height of 74 mm * 1600 mm with thickness above 60 mm on modules with a height of 74 mm 10 ATS levels – 40 trolleys. The code includes: • 2 aluminium bars (1 on the left and 1 on the right), on which the lateral stops slide. • 10 aluminium worktables. The worktables slide on hardened and ground linear guides with ball recirculation carriages. Locking is engaged on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel rails, positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X direction. Automatic positioning (EPS) for worktables. 'EPS' (Electronic Positioning System) device for automatic positioning of work surfaces and trolleys via NC, complete with locking devices that eliminate possible operating errors. Rear row stop with 140 mm stroke Middle row stop, positioned at 405 mm, with 140 mm stroke Front row stop, positioned at 1460 mm, with 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) with system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check if the stops are lowered 12 clamping devices for narrow workpieces 6 loading aid bar lifters, for H=74 mm module Configuration 5A, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to perform tool changes simultaneously. Includes the axes and carriages for movement of the main operating units. Includes 2 inverters. Second Y-axis. Enables the separation of the front and rear Y carriages with independent motorization. The two Y carriages have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode. • Ceramic bearings. • Clockwise and counterclockwise rotation. • Speed programmable via NC from 1,000 to 24,000 rpm. • The release is pneumatically actuated via a prismatic linear guide and ball bearing. A cover is included for chip extraction with 6 different positions i...