KRAUSS-MAFFEI KMD-2-50-KK

KraussMaffei KMD-2-50-KK

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Throughput: 140-180 kg/h, screw diameter: 50-103 mm, screw length: 1,300 mm, max. screw speed: 43 rpm, installed power: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, barrel cooling unit, and screw temperature control. Bsdpshz Dyajfx Agtswl

Stanje: novo, Kompletna linija za proizvodnju paleta. Bwedpfx Aswduudsgtel Broj/Pozicija Kataloški br./Naziv/Količina 1/OKKR-100/Opti-Cutter Magacin/L=3000mm/1 2/RON120/Karusel za doziranje blokova/1 3/OM-1500EL/Automat za letve/1 4/LP-OM/Sistem za pozicioniranje letvi/1 5/D-1000EL/Automat za paletne daske/1 6/KTR-1006/Lančani transporter L=6000/1 7/GRG/Portalni robot s mehaničkim hvatačem/1 8/SMS-1000EL/Mašina za sklapanje/1 9/HKR/Automatska mašina za odsecanje uglova/1 10/KTR-1004/Lančani transporter L=4000/1 11/ROB-G/Robot s mehaničkim hvatačem/1 Prosečan kapacitet: 1500 paleta/8 sati (paleta 800x1200 mm sa maksimalno 6 paletnih dasaka) Maksimalni kapacitet: 1900 paleta/8 sati (paleta 800x1200 mm sa maksimalno 6 paletnih dasaka)

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 Bedpfxoiyyf Ie Agtewl 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Basic information: Year of manufacture: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000 kg Operating voltage: 400/415V 50Hz Power consumption: 20 kW Output at 20g/l: 1600 kg/h Touch screen control panel Feeding hopper with screw conveyor Complete documentation available in both paper and electronic forms (electrical schematics, CE conformity certificate, operating manual) Condition: very good (machine clean and well-maintained, used exclusively for expanding white polystyrene) Bsdpfx Aerfn Rvsgtswl For an additional fee, we can arrange transport as well as installation and commissioning of the machine by our technicians at a location specified by the customer.

Stanje: novo, moč: 90 kW (122,37 KM), Leto izdelave: 2026, Dvovretenski drobilnik s kladivom je vrsta drobilnika, pri kateri sta na eni osi nameščena dva rotorja, ki skupaj tvorita vrteči se rotor. Dvovretenska zasnova izboljšuje zmogljivosti drobljenja ter zagotavlja bolj učinkovito in zanesljivo rešitev v primerjavi z enovretenskimi drobilniki. Ključne lastnosti in značilnosti dvovretenskega drobilnika s kladivom: 1. Dva rotorja: Kot že ime pove, ima drobilnik dva rotorja, ki se vrtita v nasprotnih smereh na skupni osi. Ta konfiguracija omogoča večjo silo udarca in večjo moč drobljenja. 2. Visoka zmogljivost: Zaradi dvojnega rotorja lahko drobilnik obdela večje vhodne kose in zagotavlja večjo kapaciteto kot drobilniki z enim rotorjem. Primeren je za drobljenje materialov z visoko trdoto in velikimi dimenzijami. 3. Večnamenskost: Dvovretenski drobilniki s kladivom so vsestranski in se uporabljajo v različnih panogah, kot so redukcija apnenca, sadre, premoga in drugih podobnih materialov v rudarstvu, cementni in gradbeni industriji. Bedpfx Ajq Nf Enogtewl 4. Drobljenje z udarcem: Glavni mehanizem drobljenja je udarec kladiv ob material. Material se dovaja v drobilnik, kjer ga hitro vrteča se kladiva razbijejo in razdrobijo. 5. Nastavljiva režna odprtina: Ti drobilniki pogosto omogočajo nastavljanje reže med rotorji in udarnimi ploščami, kar omogoča nadzor nad končno velikostjo zrn. 6. Trpežnost: Robustna konstrukcija omogoča dolgotrajno uporabo pri težkih materialih in neprekinjenem obratovanju. 7. Manjša obraba: Dvojni rotor omogoča bolj enakomerno porazdelitev obrabe med kladiva in druge obrabne dele, kar lahko podaljša življenjsko dobo drobilnika. Tipične tehnične specifikacije: (Podatki se lahko razlikujejo glede na proizvajalca – navedene so standardne vrednosti za industrijske modele): Model (velikost rotorja), Maks. vhodna velikost, Izhodna velikost, Kapaciteta (t/h), Skupna moč motorjev 600 × 400, ≤110 mm, ≤3 mm, 10 – 15, 18,5+18,5 kW 800 × 600, ≤120 mm, ≤3 mm, 40 – 50, 45+45 kW 800 × 800, ≤180 mm, ≤3 mm, 50 – 60, 45+55 kW 1000 × 800, ≤180 mm, ≤3 mm, 70 – 80, 75+55 kW 1100 × 1000, ≤200 mm, ≤3 mm, 70 – 100, 90+110 kW 1400 × 1200, ≤200 mm, ≤3 mm, 90 – 110, 132+160 kW Za dodatne informacije o dvostopenjskem drobilniku s kladivom oziroma drobilniku z dvema rotorjema nam pošljite sporočilo – naša ekipa vam bo odgovorila v najkrajšem možnem času.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Data: • Machine type: ZSK 40 • Screw diameter: 40 mm • Screw length: 7 barrels × 4 D → approx. 28 L/D • Main drive: 34.5 kW • Motor speed: 1,800 rpm • Screw speed: 40 – 400 rpm • Max. torque per screw shaft: 325 Nm • Heating: electric, connection load approx. 17 kW • Cooling: water cooling unit • Temperature control zones: 6 zones Bodpfx Aeycuuyegtewl • Housing temperature measurement points: 6 • Material temperature measurement point: 1 • Material pressure measurement point: 1 Barrel Configuration: • Feed barrel with liquid addition port • Open barrel with insert and 2 liquid addition ports • Multiple closed barrels with openings for liquid addition or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance due to modular mixing and kneading elements • Modular system for screws and barrels • Drive and process sections mounted on a sturdy base frame Areas of Application: • Plastics compounding • Masterbatch production • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Operating Time: According to the operating hours counter, the machine has run for less than one year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & Customization: Upon request, we offer design and installation of suitable tooling, e.g. strand dies, as well as integration of additional peripheral equipment such as screen changers, pelletizing lines, dosing equipment, or other customer-specific components. The machine can thus be individually configured according to customer requirements and delivered ready for operation.

Leto izdelave: 2004, stanje: rabljeno, Tank & Environmental Protection Wozniack Dear Sir or Madam, We are offering a 25,000 Liter Double-Walled Storage Tank, Diesel Tank Bwodpec Nkr Nsfx Agtel ===== Nominal capacity: 25 cbm Quantity: 1 Used: but completely overhauled, meaning the tank is cleaned, sandblasted, primed, and painted Color finish: Paint RAL; however, you may always specify your preferred color. Material: Steel-in-steel, material grade S235JRG2 Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate 1 piece: Dipstick 1 piece: Vent nozzle 1 piece: Filling nozzle 1 piece: New overfill prevention device 1 piece: New leak detector with filled leak detection liquid 1 piece: Ladder 1 piece: Suction line Design: Cylindrical horizontal tank with feet/consoles Tank dimensions: Length approx. 8,390 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Storage: Above-ground installation Compact diesel dispenser Piusi 70 L/min. Pump 230 Volt, max 55 L/min. Optional 70 L/min available on request. Naturally, you can customise your tank system as desired! Your preferences regarding color and equipment will gladly be accommodated wherever possible. All our systems are thoroughly inspected and quality-checked by select personnel at our facility. Economical delivery can be provided on request. Viewing of our systems is possible at any time. We also have a range of above-ground and underground tanks in all sizes available for sale on our premises. We also purchase existing tank systems at any time. Trade-ins of used tanks are possible. With kind regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Leto izdelave: 2018, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead travel: 520 mm Working space depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of clamping tools: screw clamps, wedge grips, pneumatic and hydraulic grips. Pressure plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on gauges, climate chambers. Load cells (selectable): 50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N Includes Hess software for Windows 8, 9, 10, or 11 for universal test procedures; simple tests can also be performed without a PC. Includes one 5 kN SP 56g screw clamp with pyramid or rubber jaws, 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring equipment. Calibration in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust construction made from aluminium and V2A stainless steel, featuring ball screw drives, linear ball bearings, and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows both force and travel. The testing machine can be used either as a standalone unit or with a PC via USB interface. Travel measurement is by encoder, with 0.01 mm visible resolution on the LCD (internal resolution 0.0001 mm). The machine comes with a standard load cell with 0.03% linearity and corresponding calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel lengths, 500 mm or 1200 mm (measured without load cell and test fixture). Bedpst Rg H Ajfx Agtowl Scope of delivery: One load cell of your choice (50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N), certificate, 220 V power cable, USB cable, manual, and CE declaration of conformity. Load Cell 3000N Measuring range: 1–3000 N (tension and compression), nominal 2 mV/V output signal Overload protection: +/-100% Linearity: +/-0.05% Hysteresis: +/-0.03% Repeatability: +/-0.02% Including 1.5 m connection cable and calibration certificate.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ekscentrična granulacija EGR se uporablja pri proizvodnji temperaturno in strižno občutljivih plastik. Posebej je zasnovana za granulacijo mehkega PVC, trdega PVC, HFFR receptur ali spojin na osnovi elastomerov za nizko-, srednje- in visokonapetostne kable. Bwjdsw Iu T Tjpfx Agtel Poleg tega se lahko naprava uporablja tudi kot klasični ekstruder z enim polžem za različne namene predelave. • Premer polža: 200 mm • z odvzračevalno cono • Pogonska moč: 72,5 kW

Leto izdelave: 2013, stanje: dober (rabljeno),  Plazmijska rezalna in odsesovalna miza, dimenzije 2.500 x 6.000 mm.  Portalni most.  Voziček s servo pogoni (za pozicioniranje portalnega mostu v X-smeri).  Strojna tirnica, dolžina 8 m.  Profili HEB450 za temelje strojne tirnice, 8 m.  Plazemska rezalna enota Hypertherm HPR 400XD, 1 kos.  Plazemska poševna rezalna enota, vključno z avtomatskim sistemom za nadzor višine.  Enota za odsesavanje dima Filtercube 4H za plazemsko rezalno enoto.  Plamenska rezalna gorilnika, 3 kosi.  Avtomatski sistem za nadzor višine IHT M4000 CAP za plamensko rezalno enoto, 3 kosi.  Nosilec gorilnika za plamenski gorilnik (motoriziran). Bodpfxotp Dhpo Agtewl  Nosilec gorilnika Single Drive za plamenski gorilnik, 2 kosa (avtomatsko pozicioniranje gorilnika).  Laserski kazalnik (za poravnavo in pozicioniranje gorilnika).  Računalniški nadzorni sistem (sestavljen iz industrijskega PC-ja in nadzorne plošče).  Nadzorna programska oprema 'VACAM Machine Edition' (vključno s programsko opremo VaCad in VaNest ter spletno podporo).  Avtomatska razporeditvena programska oprema Sigmanest "Powerpack" (vključno s 3-dnevnim usposabljanjem za največ 3 osebe pri podjetju Voortman Holland (brez potnih stroškov ter nastanitve in prehrane) ter 1-dnevno spletno podporo).  Gumb za nujni izklop z izklopno vrvico.  Letnik izdelave: 2013.