Extruder nakup rabljenega (373)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ekstruderji in vijakove stiskalnice za predelavo soje, pridobivanje olja in sojine pogače. Na voljo sta dva ekstruderja in dve stiskalnici. En ekstruder in ena stiskalnica delujeta v tandemu ter tvorita linijo za stiskanje. Moč motorja stiskalnice je 22 kW, ekstruderja pa 55 kW. Kapaciteta ene linije je 500–800 kg/h. Cena se nanaša na eno linijo (ekstruder+stiskalnica). Iolhcdotxinajwujtf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, PUHALNI EKSTRUDER HDPE Model EuroTruder 75 Itjlhcdwowivdkjuef Proizvodnja: Euro-Stel, Belgija Letnik: 2013 Ekstruder: premer 75x28 D – z nastavkom za vrat in zalogovnikom za granulacijo Model ni priložen ODLIČNO STANJE

Leto izdelave: 2011, stanje: dober (rabljeno),

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rabljeni Lehmann UMT ekstruder. Uporaben za različne namene: hrana, bioplin, substrati, lesna vlakna. Za več informacij nas kontaktirajte. Itjloyxfg Tshcdwuef

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 2.880 mm, moč vretenovega motorja: 90.000 W, vrsta vhodnega toka: trifazni, Naprodaj nova linija za kompaundiranje s realno kapaciteto 300 kg/h. Linijo sestavljata topli in hladni mešalnik, dvojnopolžni ekstruder (2 twin screw extruder) z dvema točkama za doziranje – na začetku polža in s strani, kar je primerno za visoko polnjenje s suhimi snovmi, vakuumska črpalka, hidravlični menjalnik sita, vibracijska miza in silosi za shranjevanje materiala. Linija lahko predeluje materiale v prahu, trde materiale, različne mletine, miksate, granulata PP, PE, PVC. Možna je proizvodnja kakovostnih masterbatch mešanic, polnil in ostalih produktov. Do 85 % suhe snovi. Stroj je praktično nov, preizkušen le nekaj ur. Ielox Uqyqehcdwujtf Upravljanje preko frekvenčnih regulatorjev. Ob liniji prejmete komplet rezervnih delov, rezervne grelce in rezervne segmente za polžno vreteno. Možnost preizkusa z vašim materialom.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, obratovalne ure: 87.618 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: DS 85610, skupna masa: 4.000 kg, skupna dolžina: 5.200 mm, skupna širina: 1.700 mm, skupna višina: 2.500 mm, moč: 75 kW (101,97 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vhodni tok: 160 A, originalni WEBER 8.8 ekstruder s podaljšanim valjem na model 8.22. Z novimi in originalnimi vijaki Weber. Itjlhcjx Apckedwuof HMI kontrolna plošča, uporabljena v čistem prostoru. Priložen je lijak. Stroj se prodaja v stanju, v kakršnem je.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 172 mm, največja hitrost vrtenja: 49 obr/min, Over the past few years, more than €420,000 has been invested in new components and factory overhauls! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Itjloyztagshcdwuof Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing housing: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Twin-screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory overhauled in 2021, unused Main gearbox P.I.V, year 1986, factory overhauled in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory overhauled in 2020, unused Main motors Siemens, 212 kW, year 1986, factory overhauled in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust disks Note: The electrical and control systems as well as the screw segments are not included in the scope of supply.

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Itjlhcdohx Elfswusf Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Prodajamo dve stiskalnici s pritiskom 315 ton ter ekstruder z enim polžem (za ekstruder je priložen nov rezervni frekvenčni pretvornik). Možna je prodaja vsakega posebej ali kot celote. Cena na zahtevo. Islhcoyzxf Iodwustf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Data: • Machine type: ZSK 40 • Screw diameter: 40 mm • Screw length: 7 barrels × 4 D → approx. 28 L/D • Main drive: 34.5 kW • Motor speed: 1,800 rpm • Screw speed: 40 – 400 rpm • Max. torque per screw shaft: 325 Nm • Heating: electric, connection load approx. 17 kW • Cooling: water cooling unit • Temperature control zones: 6 zones • Housing temperature measurement points: 6 • Material temperature measurement point: 1 • Material pressure measurement point: 1 Barrel Configuration: • Feed barrel with liquid addition port • Open barrel with insert and 2 liquid addition ports • Multiple closed barrels with openings for liquid addition or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance due to modular mixing and kneading elements • Modular system for screws and barrels • Drive and process sections mounted on a sturdy base frame Areas of Application: • Plastics compounding • Masterbatch production • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Operating Time: According to the operating hours counter, the machine has run for less than one year and is therefore in excellent, almost as-new condition. The screw elements are also as new. Options & Customization: Ijloycuuyohcdwuotf Upon request, we offer design and installation of suitable tooling, e.g. strand dies, as well as integration of additional peripheral equipment such as screen changers, pelletizing lines, dosing equipment, or other customer-specific components. The machine can thus be individually configured according to customer requirements and delivered ready for operation.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or pilot plant version. The machine is ideally suited for trials, compounding, product development, and small-scale production applications. This extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6 x 6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 rpm are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. Ijlhcdwey A H Umjuotf The machine is equipped with multiple heating zones. Barrel heating consists of 1 x 850 W and 5 x 1200 W, while nozzle/adapter heating is 600 W. Water cooling is available, with temperature control across zones 1 to 6 and water cooling connections via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 rpm • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Center height of screw: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Mains connection: L1 / L2 / L3 / N / PE • Fuse protection: 3 x 50 A • Max. connected load including downstream equipment: 30 kW Application Areas: Ideally suited for laboratory, pilot plant, R&D, test series, compounding, and material testing.

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Itelhcjiyyndjdwusf Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 2586k,

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW Ioleh Eyd Rjhcdwuotf 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Itslhcdsi Dtb Uowusf Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm drive: 120 kW – DC (overhauled), drive via belt pulley Heating zones/controllers for downstream equipment Control cabinet, melt pressure sensor Itelhsiyynwocdwusf Inspection/test run available at short notice by arrangement at our Wuppertal facility. Matching accessories available on request: > Screen changer > Pelletizing system (strand, hot-cut, or water-ring) > Other options. Additional extruders and complete lines available for demonstration ex works Wuppertal. We look forward to your enquiry or visit.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled, and function-tested pelletizing line Throughput up to 500 kg/h, depending on material, consisting of: - Kreyenborg SW 100 stuffing unit, 7.5 kW drive - BKG single-screw extruder, Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled - Screw speed up to 143 rpm - Screw channel depth 14 mm - Installed heating capacity approx. 35 kW - 1x atmospheric degassing zone (vacuum pump available at additional cost) - Kreyenborg double-piston screen changer K-SWE 160 RS with backflush and screen area of 244 cm² - BKG underwater pelletizing system AH 300, complete with: * Start-up valve including hydraulic station * Pelletizer with 4 kW drive * Water pump 2.2 kW * By-pass system, water tank with 9 kW heater installed and heat exchanger - BKG granulate centrifuge TWE 300 with 3 kW drive - Granulate classification screen - Control cabinet with updated Siemens touch panel OPTIONAL at additional cost: > Vacuum pump > Material conveyor, Big-Bag station > Process water cooling/temperature control unit Itslhcjd Sg I Iedwuef Additional pelletizing plants available ex works Wuppertal. Ask for our current machinery stock list or visit us.

Leto izdelave: 1980, obratovalne ure: 36.000 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11360, Iščete zanesljivo in stroškovno učinkovito rešitev? Ta rabljeni ekstruder ponuja odlično zmogljivost po bistveno nižji ceni kot nov model. Stroj je dobro vzdrževan in popolnoma funkcionalen, idealen za obdelavo PVC-ja. Popolna izbira za proizvajalce, ki želijo povečati proizvodnjo brez visokih stroškov. Za več informacij nas kontaktirajte! Islsvuquvohcdwustf

Stanje: dober (rabljeno), Leto izdelave: 2003, Naprava je vzdrževana in očiščena. Na zahtevo je na voljo tudi video delovanja. Prednja zaščitna plošča je nekoliko upognjena (glej sliko). Dolžina: 3000 mm. Globina: 700 mm. Višina: 850 mm. Teža: 740 kg brez palete / 760 kg s paleto. Stanje: Dobro, rabljeno. Ijlsy A Hxlshcdwustf

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2.065.0, vpenjalna sila: 200 kN, New digital control system from BBM Two sets of extruder heads (see attached pictures) Iolhcew Dcybedwujtf

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ekscentrična granulacija EGR se uporablja pri proizvodnji temperaturno in strižno občutljivih plastik. Posebej je zasnovana za granulacijo mehkega PVC, trdega PVC, HFFR receptur ali spojin na osnovi elastomerov za nizko-, srednje- in visokonapetostne kable. Ielhcdwow Iu T Touotf Poleg tega se lahko naprava uporablja tudi kot klasični ekstruder z enim polžem za različne namene predelave. • Premer polža: 200 mm • z odvzračevalno cono • Pogonska moč: 72,5 kW

Leto izdelave: 2016, stanje: rabljeno, številka stroja/vozila: 571091905, Lastna teža: 750 kg Itoljy Aqbdjhcdwuef

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Category: Twin-screw extruder Reference Number: DE27669 Manufacturer: Coperion - Werner & Pfleiderer Model: ZSK 40 Year of manufacture: 2000 Throughput: 250 – 450 kg/h Screw diameter: 2 x Ø 40.0 mm L/D ratio: 40:1 Drive motor: 110 kW Suitable materials: PE, PP, PS, ABS Additional details: Co-rotating screws, venting section with segmented screws and barrel Including brand new control cabinet This offer does not meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry – we have suitable options for almost every budget. Ielhcen Nxl Sodwustf

Leto izdelave: 2016, stanje: kot nova (razstavni stroj),

Leto izdelave: 2010, obratovalne ure: 29.000 h, stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Numéro : DE27699 Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Itslhsxykcgscdwuef Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.