Dnevnik Tračne Žage nakup rabljenega (4.191)

Stanje: novo, Cutting capacity at 90 degrees (round): 240 mm Cutting capacity at 90 degrees (square): 240 mm Cutting capacity at 90 degrees (rectangular): 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Gedpofgyh Hofx Afqeil Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight: approx. 0.4 t The Z252/DGH is equipped with: - Hydraulic semi-automatic operation - Double mitre, 60° left / 45° right - Emulsion pump - Machine base - Saw blade - 400V, 16A plug The machine is delivered fully assembled and ready for immediate operation.

Stanje: zelo dobro (rabljeno), Frietsch ŽAGNE STROJI Nakup in prodaja KASTO žagnih strojev Spoštovane dame in gospodje, Gedpjfh Hukjfx Afqjil kupujemo in prodajamo, obnavljamo, generalno prenavljamo ter lakiramo KASTO žagalne stroje. Več kot 40 let imamo izkušenj z žagalnimi stroji KASTO in smo specializirani za njihovo generalno obnovo. Stroji so obnovljeni s strani strokovnega osebja po tovarniških standardih KASTO. Po vaši želji poiščemo tudi KASTO žagalne stroje za generalno obnovo. Dobra cena in zmogljivost zaradi profesionalne obnove strojev.

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Giedpofgyh Eefx Afqsl Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - automatic cutting - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Godpefgyh Uofx Afqoil Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support Gsdpsfgyiaofx Afqoil - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Giedpefgyicofx Afqel Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: Gsdpfofg E Hlox Afqsil 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right Gedpjd Iipxefx Afqoil - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m Gedpfxsd Iip Ns Afqoil SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter Gsdpfx Aefgyh Sjfqeil - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Gisdped Iiptefx Afqol Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter cut left 60° / right 45° • Heavy-duty industrial hydraulics, 18 bar • Optimal access to the workpiece • Ammeter for monitoring: - Cutting force optimization - Blade life - Cut accuracy • Hydraulic vice: automatic clamping and release • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, movable • Height sensor for material (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material, or for serial cuts, start cutting immediately 4. Saw blade stops 5. Raise saw frame slightly above material 6. Release vice

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Gijdpfx Afsfg E Hpeqsl Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Giedpfxsd Iip Rs Afqjl Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m Giodpfxsfgyh Rs Afqjl SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Giedjfd Abaopfx Afqjl Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting diameter: 225 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Table height: 935 mm Cutting speed: 45 + 90 m/min Cutting capacity at 90° round: 225 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 60° round: 90 mm Cutting area at 90° (rectangular): 150 x 245 mm Cutting area at 45° (rectangular): 190 x 150 mm Cutting area at 60° (flat): 120 x 90 mm Gedpsfb Nbdjfx Afqjil Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 1380 x 580 x 930 mm - With a power rating of 1,100 watts, the unit is ideal for processing hard metals. - Enhanced safety thanks to emergency stop and automatic shut-off. - The low-noise electric motor ensures a quiet working environment. - Ergonomically designed buttons provide convenient operation of the machine.

Stanje: novo, Cutting diameter: 170 mm Saw band dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Giedpfx Asg Trvrsfqsl Cutting capacity at 90° (round): 170 mm Cutting capacity at 45° (round): 125 mm Cutting range at 90° (rectangular): 150 x 190 mm Cutting range at 45° (rectangular): 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (LxWxH): 870 x 1,550 x 1,740 mm This metal bandsaw is supplied with an enclosed worm gear. It is also equipped with a hydraulic pressure regulator and a base frame that can be swiveled by 45 degrees. Additional features include an emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release vice.

Stanje: novo, Cutting diameter: 330 mm Gijdpfxefg E Ibe Afqol Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Gieded Iip Tspfx Afqsl Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space requirement approx. 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! -Mitre cuts up to 60° left Gijdpod Iip Usfx Afqel -Cutting speed 35 / 70 m / min -Vice with quick-release device -Carbide saw band guides -Band tension control -Electric cooling system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Infinitely variable feed adjustment -With limit switch -Rapid lowering of the saw frame from resting position to the workpiece, then switch to normal feed rate -Manual operation Freight charge: EUR 85,-

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. Gsdpfjfg E H Rox Afqoil The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 225 mm Saw band length: 2455 mm Gijdpfjgxi D Tsx Afqsl Table height: 850 mm Cutting width: 245 x 150 mm Cutting speed: 45/90 m/min Saw band dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 45° round: 145 mm Cutting capacity at 45° square: 145 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight approx. 0.2 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Mitre band saw - Mitre cuts up to 60° to the left - Vise with quick-release mechanism - Band tension control - Electric cooling system

Stanje: novo, Cutting diameter: 250 mm Saw band length: 3150 x 27 x 0.9 mm Table height: 700 mm Cut width: 250 x 320 mm Cutting speed: 25 - 90 m/min Gsdeff Efrepfx Afqeil Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting capacity at 60° round: 120 mm Cutting capacity at 60° square: 120 mm Cutting capacity at 45° round: 190 mm Cutting capacity at 45° square: 190 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight: approx. 0.5 t Dimensions (L x W x H): 0.95 x 1.16 x 1.98 m Robust band saw for solid materials - Double mitre cuts up to 60° - AutoCut feature - Quick-release vice - Band tension control - Electric cooling system - Material stop

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Gjdpjfg E H Uefx Afqjil Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Key Features: - New centralized control console on an articulated arm. - Low voltage control panel: - Polyester membrane keyboard with thermoformed raised buttons and operating control signal. - Display showing: * Diagnostics (messages in user language) * Alarms (description of alarm reasons) * Status of inputs and outputs * Cut counter * Time elapsed per completed cut * Saw blade motor current * Saw blade tension * Saw blade speed * Numerical display of head position - Manual 24V cycle selector switch IP55. - Complete program of all special cutting cycles. - Identification of additional special cutting cycles for specific applications. - New generation, highly efficient hydraulic control unit with low energy consumption. - Rotary table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Dual band speed (40/80 m/min.) with control - Prepared for installation of electronic inverter for stepless adjustment of band speed from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to adapt to the workpiece material. - Clamping device can be shifted left/right, with quick-release vice. - Manual blade tension control with screen display via electronic converter. - Machine base designed to fully collect coolant, even during maximum angle cuts. - Coolant tank (with electric pump for blade lubrication and cooling) and chip drawer (can be replaced with a chip conveyor – see optional accessories) integrated in the base. - Preparation for the installation of minimal blade lubrication set (optional, in addition to the standard emulsion oil lubrication system). - Integrated chip removal brush. - Machine designed for pallet truck transport. - Adjustable length stop for repeat cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal saw blade for solid and profile material. - Tools and operating manual in the relevant user language.

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Giodpjfg E H Tsfx Afqjl Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.